DeLonghi ECAM35X.55 Dinamica Automatic Coffee Machine Instruction Manual Product Information Product Usage Instructions FAQ

: February 10, 2024
: Delonghi

ECAM35X.55 Dinamica Automatic Coffee Machine

Product Information

Specifications:

Model: ECAM35X.55
Type: Bean to Cup Espresso and Cappuccino Machine
Language: English (EN)
Page: 6

Description:

The ECAM35X.55 is a bean to cup espresso and cappuccino machine.
It is designed to provide you with freshly brewed coffee using
coffee beans or pre-ground coffee. The machine also comes with a
milk container for making cappuccinos and other milk-based
coffees.

Accessories:

The machine comes with the following accessories:

Coffee mill
Milk container

Milk Container Description:

The milk container is used for frothing milk and preparing
milk-based coffees. It can be easily attached and detached from the
machine.

Product Usage Instructions

1. Fundamental Safety Warnings:

Follow the safety precautions mentioned in the user manual to
ensure safe usage of the machine.

2. Safety Warnings:

Refer to the symbols used in the instructions to understand
important safety information. Use the machine only for its
designated purpose as mentioned in the user manual.

3. Introduction:

The letters in brackets are used for reference throughout the
user manual. Troubleshooting and repairs should be carried out by
authorized service centers.

4. Description:

The appliance is described as a bean to cup espresso and
cappuccino machine. The accessories include a coffee mill and a
milk container for frothing milk. Refer to the user manual for a
detailed description of the appliance and its accessories.

5. Before Use:

Before using the machine, check its condition and ensure all
parts are in place. Install the appliance as per the instructions
provided. Connect the appliance to a power source. Set up the
appliance by following the steps mentioned in the user manual.

6. Turning the Appliance On:

Follow the instructions to turn on the appliance.

7. Turning the Appliance Off:

Follow the instructions to turn off the appliance.

Access the menu settings to customize various options such as
language, maintenance, program beverages, program My beverages,
general settings, and statistics.

9. Rinsing:

Learn how to rinse the machine for optimal performance and
cleanliness.

10. Making Coffee:

Adjust the coffee mill for desired coffee strength. Follow the
tips for making hotter coffee. Learn how to make automatic recipes
using coffee beans and how to make coffee using pre-ground
coffee.

11. Making Cappuccinos and Milk-based Coffees:

Fill and attach the milk container. Adjust the amount of froth
as per your preference. Make cappuccinos and milk-based coffees
automatically. Clean the milk container after use.

12. Programming and Selecting:

Learn how to program and select various options on the
machine.

13. Delivering Hot Water:

Find out how to deliver hot water using the machine.

For more detailed instructions and troubleshooting, refer to

the user manual provided with the machine.

FAQ

Q: Where can I find instruction videos for this machine?

A: Instruction videos for this machine can be found at http://ecam35055.delonghi.com.

Q: Is the user manual available online?

A: Yes, the user manual can be downloaded from https://manual-hub.com/.

ECAM35X.55
BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE Instruction for Use Instructions videos available at: http://ecam35055.delonghi.com

EN
page 6

B

B1

B2

B5 B8 B10 B12

C

C1

C2

C3

C4

C5

B3 B4 B6 B7 B9 B11 B13
D
D1 D2
D3 D5
D4

C6

C7

2

A

A1

A2

A5 A6 A7 B
A8 A9

A3 A4 A22 A21

A10 A11
A12 A13

A20 A19

A16
A14 A17
A15
3

A18

3A

1

2

3B

4

5

6

7

8

9

10

11

12

13

14
4

15

16

17

18

19

20

24A

21

22

23

24B

PUSH
PUSH

25

26

29

30
5

27
A

28
B

B

A

31

32

CONTENTS

1. FUNDAMENTAL SAFETY WARNINGS………….7

2. SAFETY WARNINGS ………………………………8 2.1 Symbols used in these instructions ……………8 2.2 Designated use……………………………………….8 2.3 Instruction for Use…………………………………..8

3. INTRODUCTION……………………………………8 3.1 Letters in brackets …………………………………..8 3.2 Troubleshooting and repairs……………………..8

4. DESCRIPTION………………………………………9 4.1 Description of the appliance …………………….9 4.2 Description of the accessories……………………9 4.3 Description of the milk container ………………9

5. BEFORE USE……………………………………….. 9 5.1 Checking the appliance ……………………………9 5.2 Installing the appliance……………………………9 5.3 Connecting the appliance……………………….10 5.4 Setting up the appliance ………………………..10

6. TURNING THE APPLIANCE ON……………….. 10

7. TURNING THE APPLIANCE OFF ……………… 10

8. MENU SETTINGS ……………………………….. 11 8.1 Language …………………………………………….11 8.2 Maintenance ………………………………………..11 8.3 Program beverages ……………………………….11 8.4 Program My beverages…………………………..11 8.5 General ……………………………………………….11 8.6 Statistics………………………………………………12

9. RINSING………………………………………….. 12

10. MAKING COFFEE………………………………… 13 10.1 Adjusting the coffee mill ………………………..13 10.2 Tips for a hotter coffee……………………………13 10.3 Making automatic recipes using coffee beans . …………………………………………………………13 10.4 Temporarily varying the coffee aroma………14 10.5 Making coffee using pre-ground coffee…….14

11. MAKING CAPPUCCINOS AND MILK-BASED COFFEES………………………………………….. 14 11.1 Filling and attaching the milk container……15 11.2 Adjusting the amount of froth…………………15 11.3 Making cappuccino and milk-based coffees automatically ……………………………………….15 11.4 Cleaning the milk container after use ………15

12. ”

” PROGRAMMING AND SELECTING..

……………………………………………………… 16

13. DELIVERING HOT WATER …………………….. 16
14. CLEANING………………………………………… 16 14.1 Cleaning the machine ……………………………16 14.2 Cleaning the machine’s internal circuit …….16 14.3 Cleaning the coffee grounds container……..17 14.4 Cleaning the drip tray and condensate tray.17 14.5 Cleaning the inside of the coffee machine…17 14.6 Cleaning the water tank…………………………17 14.7 Cleaning the coffee spouts ……………………..17 14.8 Cleaning the pre-ground coffee funnel …….17 14.9 Cleaning the infuser ………………………………17 14.10Cleaning the milk container ……………………18 14.11Cleaning the hot water nozzle…………………18
15. DESCALING………………………………………. 18
16. SETTING WATER HARDNESS …………………. 19 16.1 Measuring water hardness……………………..19 16.2 Setting water hardness ………………………….19
17. WATER SOFTENER FILTER ……………………. 19 17.1 Installing the filter ………………………………..20 17.2 Replacing the filter………………………………..20 17.3 Removing the filter ……………………………….21
18. TECHNICAL DATA……………………………….. 21
19. DISPOSING OF THE APPLIANCE …………….. 21
20. DISPLAYED MESSAGES………………………… 21
21. TROUBLESHOOTING …………………………… 24
22. ELECTRICAL REQUIREMENTS………………… 26

6

1. FUNDAMENTAL SAFETY WARNINGS
· The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
· Children should be supervised to ensure that they do not play with the appliance. · Designated use: this appliance is designed and made to prepare coffee and milk
based beverages and hot water. Any other use is considered improper and thus dangerous. The manufacturer is not liable for damage deriving from improper use of the appliance. · The surface of the heating element remains hot after use and the outside of the appliance may retain the heat for several minutes depending on use. · To clean, follow the instructions in the section “15. CLEANING”. · Cleaning and user maintenance shall not be made by children without supervision. · Never clean by immersing the appliance in water. · CAUTION: To prevent damage to the appliance do not use alkaline cleaning agents when cleaning, use a soft cloth and a mild detergent · This is a household appliance only. It is not intended to be used in: staff kitchen areas in shops, offices and other working environments; farm houses; by clients in hotels, motels and other residential type environments; bed and breakfast type environments. · If the plug or cord is damaged, it must be replaced by Customer Services only to avoid all risk. · Appliances with removable cord: avoid splashes of water on the power cord connector or socket at the back of the appliance. FOR EUROPEAN MARKETS ONLY: · This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazard involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. Keep the appliance and its cord out of the reach of children aged less than 8 years. · Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. · Children shall not play with the appliance.
7

· When not in use and before putting on or taking off parts or cleaning, always unplug the appliance. Surfaces marked with this symbol become hot during use (the symbol is present in certain models only).

2. SAFETY WARNINGS 2.1 Symbols used in these instructions Important warnings are identified by these symbols. It is vital to respect these warnings.
Danger! Failure to observe the warning may result in life threatening injury by electric shock.
Important! Failure to observe the warning could result in injury or damage to the appliance.
Danger of burns! Failure to observe the warning could result in scalds or burns.
Please note: This symbol identifies important advice or information for the user.

2.2 Designated use This appliance is designed and made to prepare coffee and heat beverages. Any other use is considered improper and thus dangerous. The manufacturer is not liable for damage deriving from improper use of the appliance.
2.3 Instruction for Use Read this Instruction for Use carefully before using the appliance. Failure to follow this Instruction for Use may result in burns or damage to the appliance. The manufacturer is not liable for damage deriving from failure to respect this Instruction for Use.
Please note: Keep this Instruction for Use. If the appliance is passed to other persons, they must also be provided with this Instruction for Use.

Danger! This is an electrical appliance and may cause electric shock. You should therefore follow these safety warnings: · Never touch the appliance with damp hands or feet. · Never touch the plug with damp hands. · Make sure the socket used is freely accessible at all times,
enabling the appliance to be unplugged when necessary.

3. INTRODUCTION Thank you for choosing this bean to cup espresso and cappuccino machine. We hope you enjoy using your new appliance. Take a few minutes to read this Instruction for Use. This will avoid all risks and damage to the appliance.

· Unplug directly from the plug only. Never pull the cord as you could damage it.
· To disconnect the appliance completely you must unplug it from the mains socket.

3.1 Letters in brackets The letters in brackets refer to the legend in the description of the appliance on pages 2-3.

· If the appliance is faulty, do not attempt to repair. Turn it off, unplug from the mains socket and contact Customer Services.
· Before cleaning the appliance, turn it off, unplug from the mains socket and allow to cool.
Important: Keep all packaging (plastic bags, polystyrene foam) away from children.

3.2 Troubleshooting and repairs In the event of problems, first try and resolve them by reading the information given in sections “20. Displayed messages” and “21. Troubleshooting”. If this does not resolve the problem or you require further information, you should consult Customer Services by calling the number given on the annexed “Customer Service” sheet. If your country is not among those listed on the sheet, call the

Danger of burns! This appliance produces hot water and steam may form while it is in operation.

number given in the guarantee. If repairs are required, contact De’Longhi Customer Services only. The addresses are given in the guarantee certificate provided with the machine.

Avoid contact with splashes of water or hot steam.

When the appliance is in operation, the cup shelf could become

very hot.

8

4. DESCRIPTION
4.1 Description of the appliance (page 3 – A) A1. Beans container lid A2. Pre- ground coffee funnel lid A3. Beans container A4. Pre-ground coffee funnel A5. Grinding adjustment dial A6. Cup shelf A7. button: to turn the appliance on and off (standby) A8. Hot water and steam connection nozzle A9. Coffee spouts (adjustable height) A10. Condensate tray A11. Coffee grounds container A12. Cup tray A13. Drip tray water level indicator A14. Drip tray grille A15. Drip tray A16. Water tank lid A17. Water tank A18. Water softener filter housing A19. Infuser door A20. Infuser A21. Power cord connector socket A22. Main switch
Description of the touch screen (page 2 – B ) A number of buttons on the panel have a double function. This is indicated in brackets in the description. B1. Display: guides the user in using the appliance. The current
selection is at the centre between two dotted lines. B2. Selection arrow(“ESC”: when programming beverages,
press to exit without saving the change) B3. OK: to confirm the selection(During the first few seconds of
“espresso”, “Ristretto” or “Espresso lungo” delivery, press for 2 cups) B4. Selection arrow(“STOP” – When delivering/programming beverages, press to interrupt/programme) B5. /ESC: to perform a rinse cycle. (When in the settings menu, it acts as the “ESC” button to exit from the selected function and go back to the main menu) B6. : appliance settings menu B7. : aroma selection
Directly selected beverages: B8. : Espresso B9. : Coffee B10. : Cappuccino B11. : Latte Macchiato

B12.

: Beverage selection menu (other than direct-

ly selected beverages): Espresso lungo, Ristretto, Long,

Doppio+, Caffelatte, Flat white, Hot milk, 2xEspresso, 2 x

Espresso lungo, 2x Ristretto, Hot Water

B13.

: My beverages selection menu. Unless previous-

ly programmed from the settings menu (“8.4 Program My

beverages”), the beverage is programmed directly the first

time you use the appliance.

4.2 Description of the accessories (page 2 – C ) C1. Indicator paper C2. Pre- ground coffee measure C3. Descaler C4. Water softener filter (certain models only) C5. Cleaning brush C6. Hot water spout C7. Power cord

4.3 Description of the milk container (page 2 – D ) D1. Froth adjustment and CLEAN dial D2. Milk container lid D3. Milk container D4. Milk intake tube D5. Frothed milk spout (adjustable)

5. BEFORE USE
5.1 Checking the appliance After removing the packaging, make sure the product is complete and undamaged and that all accessories (C) are present. Do not use the appliance if it is visibly damaged. Contact De’Longhi Customer Services.

5.2 Installing the appliance
Important! When you install the appliance, you should respect the following safety warnings: · The appliance gives off heat. After positioning the appli-
ance on the worktop, leave a space of at least 3 cm between the surfaces of the appliance and the side and rear walls and at least 15 cm above the coffee maker. · Water penetrating the coffee machine could cause damage. Do not place the appliance near taps or sinks. · The appliance could be damaged if the water it contains freezes. Do not install the appliance in a room where the temperature could drop below freezing point.

9

· Arrange the cord (C7) in such a way that it cannot be damaged by sharp edges or contact with hot surfaces (e.g. electric hot plates).
5.3 Connecting the appliance
Important! Check that the mains power supply voltage corresponds to that indicated on the rating plate on the bottom of the appliance. Connect the appliance to an efficiently earthed and correctly installed socket with a minimum current rating of 10A only. If the power socket does not match the plug on the appliance, have the socket replaced with a suitable type by a qualified professional.

· When making the first 5-6 cappuccinos, it is normal to hear the noise of boiling water. After this, the noise becomes less.
· To enjoy your coffee even more and improve the performance of your appliance, we recommend installing a water softener filter (C4) as described in section “17. Water softener filter”. If your model is not provided with a filter, you can request one from De’Longhi Customer Services.
6. TURNING THE APPLIANCE ON
Please note: Before turning the appliance on, make sure the main switch (A22) on the back of the appliance is pressed (fig. 2).

5.4 Setting up the appliance

Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appli-

Please note:

ance is ready for use only after completion of this cycle.

· Coffee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coffee in the mill. The machine is, however, guaranteed to be new.
· You should customise water hardness as soon as possible

Danger of burns! During rinsing, a little hot water comes out of the coffee spouts (A9) and is collected in the drip tray (A15) underneath. Avoid contact with splashes of water.

following the instructions in section “16. Setting water hardness”.

· To turn the appliance on, press the button (A7) (fig. 6). The message “Heating Please wait” appears on the dis-

1. Plug the power cord (C7) connector into the socket (A21) at the back of the appliance and connect the appliance to the mains electricity supply (fig. 1). Make sure the main switch (A22) at the back of the appliance is pressed (fig. 2);
2. “Language”: press the selection arrow (B2) until the required language is displayed between the two dotted lines, then press OK (B3) to confirm.

play (B1). After heating, the message “Rinsing” is displayed, together with a progress bar which gradually fills as preparation proceeds. As well as heating the boiler, the appliance also heats the internal circuits by circulating hot water. The appliance is at temperature when the message “Select your beverage” is displayed.

Then follow the instructions indicated on the appliance display (B1): 3. “Fill tank”: remove the water tank (A17), fill to the MAX
line with fresh water (fig. 3A), then replace in the appli-

7. TURNING THE APPLIANCE OFF Whenever the coffee machine is turned off after being used to make coffee, it performs an automatic rinse cycle.

ance (fig. 3B);

Danger of burns!

4. “Insert water spout”: Check that the hot water spout (C6) During rinsing, a little hot water flows from the coffee spouts

is inserted on the connection nozzle (A8) (fig. 4) and place (A9). Avoid contact with splashes of water.

a container holding a minimum of 100 ml underneath (fig. 5); 5. “Water circuit empty, Fill water circuit, Hot water, Confirm?”; 6. Press the OK button to confirm. The appliance delivers hot water from the spout then goes off automatically.

· To turn the appliance off, press the button (A7) (fig. 6);
· The message “Turning off underway Please wait” appears on the display (B1), then the appliance performs a rinse cycle and goes off (standby).

The coffee machine is now ready for normal use.

Please note: · The first time you use the coffee maker, you need to make
4-5 cups of coffee or 4-5 cappuccinos before it starts to give

Please note! If you will not be using the appliance for some time, unplug from the mains socket:

satisfactory results. 10

· first turn the appliance off by pressing the (fig. 6);
· press the main switch (A22) (fig. 2).

button

Important! Never press the main switch while the appliance is on.

8. MENU SETTINGS The menu has 6 items, some divided into subgroups: · Language; · Maintenance:
– Descale, – Install filter, – (if a filter has been installed): Replace filter, – (if a filter has been installed): Remove filter; · Prg. beverages; · Prg. my beverages; · General: – Set temperature, – Water hardness, – Auto-off, – Energy saving, – Beep, – Default beverages, – Default values; · Statistics.
8.1 Language To modify the language of the display (B1), proceed as follows:
1. Press (B6) to enter the “Settings” menu; 2. Press OK (B3) to select “Language”. The available languag-
es are displayed; 3. Press the selection arrows (B2 and B4) until the required
language is displayed between the two lines; 4. Press OK to confirm; 5. The appliance goes back to the “Settings” menu; 6. Press /ESC (B5) to exit the menu.

8.2 Maintenance Here you can find all the maintenance operations required by the appliance over time: · Descale: For instructions on descaling, see section “15.
Descaling”. · Install filter: For instructions on how to install the filter
(C4), see section “17.1 Installing the filter”. To select the operation you require, proceed as follows:
1. Press (B6) to enter the “Settings” menu; 2. Press the selection arrows (B2 and B4) until “Maintenance”
is displayed between the two lines; 3. Press OK (B3) to confirm;

4. Press the selection arrows to display the operation to be performed;
5. Press OK to confirm and perform the operations as described in the corresponding sections.

8.3 Program beverages

The appliance is set by default to automatically deliver standard

quantities. To change these quantities and customise the direct-

ly selected beverages and the

(B12), proceed as

follows:

1. Press (B6) to enter the “Settings” menu;

2. Press the selection arrows (B2 and B4) until “Prg. beverag-

es” is displayed between the two lines;

3. Press OK (B3) to confirm: the appliance lists the beverages

you can customise;

4. Press the selection arrows until the beverage you want to

customise is displayed, then press OK to confirm;

5. Beverages with coffee: “Program aroma” appears on

the display: press the selection arrows (B2 and B4) or (B7) until the required aroma is selected (see section “10.4 Temporarily varying the coffee aroma”), then press OK. “Program coffee” appears on the display together with a bar which gradually fills as delivery progresses. When the required quantity is reached, press OK; Cappuccinos and milk-based coffees: after selecting the aroma, “Program milk” appears on the display together with a bar which gradually fills as milk delivery progresses. When the required quantity is reached, press OK. The appliance then makes the coffee. Press OK to interrupt delivery when the required quantity of coffee is reached. Hot water: press OK. Delivery begins: press OK when the required quantity is reached. 6. “Save parameters?”: to save the settings, press OK (otherwise press /ESC – B2 or B5). 7. “Parameters saved” (or “Parameters not saved”). The appliance is ready for use again.

8.4 Program My beverages

Follow the procedures described in the previous section”8.3 Pro-

gram beverages”to customise the beverages in the ”

” (B13) or proceed with direct programming, as described in

section “12. ”

” Programming and selecting”.

8.5 General Here you can find the settings to customise the basic functions of the appliance:
1. Press (B6) to enter the “Settings” menu; 2. Press the selection arrows (B2 and B4) until “General” is
displayed between the two lines;

11

3. Press OK (B3) to confirm and select the required item with the selection arrows. Then follow the instructions for each setting.
· Set temperature: To modify the temperature of the water used to make the coffee, proceed as follows: 4. Press OK (B3). The current value appears on the display
(B1) and the “New” value flashes; 5. Select the new value you want to set using the selection
arrows (B2 or B4); 6. When the required value (low, medium, high, maximum)
has been selected, press OK. The display goes back to the previous screen.
· Water hardness: For instructions on identifying and setting water hardness, see section “16. Setting water hardness”.
· Auto-off (standby): Auto-off can be set so that the appliance goes off after 15 or 30 minutes, or 1, 2 or 3 hours 4. Press OK. The current value appears on the display (B1) and
the “New” value flashes; 5. Select the new value you want to set using the selection
arrows (B2 or B4); 6. When the required value (low, medium, high, maximum)
has been selected, press OK. The display goes back to the previous screen.
· Energy saving: Use this function to enable or disable energy saving. When enabled, the function reduces energy consumption in compliance with European regulations. To disable or enable “Energy Saving”, proceed as follows: 4. Press OK. The current state (“Enabled” or “Disabled”) and
the operation to be performed (“Disable?” or “Enable?”) is displayed. Press OK to confirm; 5. Press OK to disable or enable the function. The display goes back to the previous screen.
Please note! · when the function is enabled, the symbol “ECO” appears
on the display. · When in energy saving mode, a few seconds elapse before
the first coffee, cappuccino or milk-based coffee is delivered as the appliance must heat up again. · If the milk container (D) is inserted, “Energy Saving” cannot be activated.
· Beep: Use this function to enable or disable the beep. Proceed as follows:

4. Press OK. The current state (“Enabled” or “Disabled”) and the operation to be performed (“Disable?” or “Enable?”) is displayed. Press OK to confirm;
5. Press OK to disable or enable the function. The display goes back to the previous screen.
· Default beverages: Use this function to reset the default values for all the beverages, or the individual beverages programmed previously. Select the beverage, then proceed as follows: 4. Select “All” to reset the aroma and quantity settings to the
default values, or select the required beverage, then press OK; 5. “Reset?”: to reset the default values, press OK. 6. “Reset complete”: the appliance confirms the reset and goes back to the previous screen. To reset another beverage, repeat from point 4 or to exit, press /ESC (B5).
· Default values: Use this function to reset all the appliance and beverage settings (apart from the language which remains as selected the first time the appliance was used). Select the item, then proceed as follows: 4. “Reset?”; press OK; 5. “Reset complete”: the appliance confirms the reset and
goes back to the previous screen. To exit, press /ESC (B5).
8.6 Statistics This displays statistics relating to the machine. To display the statistics, proceed as follows: 1. Press (B6) to enter the “Settings” menu; 2. Press the selection arrows (B2 and B4) until “Statistics” is
displayed between the two lines; 3. Press OK (B3): statistics on the appliance are displayed, use
the selection arrows to scroll through the items; 4. Press /ESC (B5) to exit. To go back to the main screen, press /ESC.
9. RINSING Use this function to deliver hot water from the coffee spouts (A9) and hot water spout (C6), if inserted, to clean and heat the appliance’s internal circuit. Place a container with a minimum capacity of 100ml under the coffee and hot water spouts.
Important! Danger of burns.
Do not leave the appliance unattended while hot water is being delivered.

12

To enable this function, press (B5). “RINSING” appears on the display (B1);
After a few seconds, hot water is delivered first from the coffee spouts, then from the hot water spout (if inserted) to clean and heat the appliance’s internal circuit. A progress bar is displayed and fills gradually as preparation proceeds;
To interrupt, press the arrow corresponding to “STOP” (B4).
Please note! · If the appliance is not used for more than 3-4 days, when
switched on again, we strongly recommend performing 2/3 rinses before use; · After cleaning, it is normal for the coffee grounds container (A11) to contain water.
10. MAKING COFFEE 10.1 Adjusting the coffee mill The coffee mill is set by default to prepare coffee correctly and should not require regulating initially. However, if after making the first few coffees you find that the coffee is either too weak and not creamy enough or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding dial (A5) (fig. 7).
Please note: The grinding adjustment dial must only be turned when the coffee mill is in operation.
If the coffee is delivered too slowly or not at all, turn one click clockwise towards 7. For fuller bodied creamier coffee, turn one click anticlockwise towards 1 (do not turn more than one click at a time otherwise the coffee could be delivered a drop at a time). These adjustments will only be evident after at least 2 cups of coffee have been delivered. If this adjustment does not obtain the desired result, turn the dial another click.
10.2 Tips for a hotter coffee For hotter coffee, you should: · to rinse, press /ESC (B5); · warm the cups with hot water using the hot water function
(see section “13. Delivering hot water”); · increase the coffee temperature in the “Settings” menu
(see section “8.5 General”).

10.3 Making automatic recipes using coffee beans

Important! Do not use green, caramelised or candied coffee beans as they could stick to the coffee mill and make it unusable. 1. Fill the container (A3) (fig. 8) with coffee beans; 2. Place under the coffee spouts (A9):
– 1 cup, if you want to make 1 coffee (fig. 9); – 2 cups if you want 2 coffees. 3. Lower the spouts as near as possible to the cup. This makes a creamier coffee (fig. 10); 4. Then select your required coffee:

Directly selected beverages

Recipe

Quantity Program- Default mable aroma quantity

40 ml from 30

Espresso (B8)

to 80ml

180 ml from 100

Coffee (B9)

to 240ml

Beverages with coffee selectable from the (B14)

Espresso lungo

120 ml from 80 to 180ml

Rispresso

30 ml from 20 to 40ml

Long

160 ml from 115

to 250ml

Doppio+ 120 ml from 80

to 180ml

2 Espresso 40 ml x -2 cups

2 Espresso 120 ml —

lungo

x 2 cups

2 Ristretto 30 ml x -2 cups

5. Preparation begins. A progress bar appears on the display (B1) and gradually fills as preparation proceeds.
Please note: · You can prepare 2 cups of Ristretto, ESPRESSO or Espresso
lungo coffee at the same time by pressing “2X” (B3) during preparation of single beverages (the image is displayed for a few seconds at the start of preparation).

13

· While the machine is making coffee, delivery can be interrupted at any time by pressing the selection arrow corresponding to “STOP” (B4).
· At the end of delivery, to increase the quantity of coffee in the cup, just press and hold (within 3 seconds) one of the coffee buttons (B8 or B10).
Once the coffee has been made, the appliance is ready to make the next beverage.
Please note: · Various alarm messages could be displayed while using the
appliance (fill tank, empty grounds container, etc.). Their meaning is explained in section “20. Displayed messages”. · For hotter coffee, see section “10.2 Tips for a hotter coffee”. · If the coffee is delivered a drop at a time, too weak and not creamy enough or too cold, read the tips in section “21. Troubleshooting”. · To customise the beverages according to personal taste, see sections”8.3 Program beverages”and”8.4 Program My beverages”.

10.4 Temporarily varying the coffee aroma To temporarily vary the aroma of the coffee in the automatic recipes, press (B7):

AUTO

Custom (if programmed) /

Standard

EXTRA LIGHT

LIGHT

MEDIUM

STRONG

X-STRONG

(see “10.5 Making coffee using pre-ground coffee”)

Please note: · The variation in aroma is not saved and the next time a
beverage is delivered automatically, the appliance selects the default value ( AUTO). · If a few seconds elapse between temporary customising of the aroma and delivery of the beverage, the aroma returns to the default value ( AUTO).

10.5 Making coffee using pre-ground coffee
Important! · Never add pre-ground coffee when the machine is off or it
could spread through the inside of the machine and dirty it. This could damage the appliance. · Never use more than 1 level measure (C2) or it could dirty the inside of the coffee machine or block the funnel (A4).
Please note: If you use pre-ground coffee, you can only make one cup of coffee at a time.

1. Press the button (B7) repeatedly until ” ” appears on the display (B1).
2. Make sure the funnel is not blocked, then add one level measure of pre- ground coffee (fig. 11).
3. Place a cup under the coffee spouts (A9) (fig. 9). 4. Then select your required coffee:

Directly selected beverages

Recipe

Quantity

Espresso (B8)

40 ml

Coffee (B9)

180 ml

Beverages with coffee selectable from the (B12)

Espresso lungo

120 ml

Ristretto

30 ml

Long

160 ml

5. Preparation begins. The beverage selected appears on the

display together with a progress bar which gradually fills

as preparation proceeds.

Important! Making LONG coffee : Halfway through preparation, the message “Add pre-ground coffee” appears on the display (B1). Add one level measure of pre- ground coffee and press OK (B3).

Please note: If “Energy Saving” mode is active, you may have to wait a few seconds before the first coffee is delivered.

11. MAKING CAPPUCCINOS AND MILK-BASED COFFEES
Please note: · To avoid milk with poor froth or large bubbles, always
clean the milk container lid (D2) and hot water connection nozzle (A8) as described in sections”11.4 Cleaning the milk

14

container after use”, “14.10 Cleaning the milk container” and “14.11 Cleaning the hot water nozzle”.

11.1 Filling and attaching the milk container 1. Remove the lid (D2) (fig. 12); 2. Fill the milk container (D3) with a sufficient quantity of
milk, not exceeding the MAX level marked on the handle (fig. 13). Each mark on the side of the container corresponds to 100ml of milk;
Please note: · For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about 5°C). · If “Energy Saving” mode is enabled, you may have to wait a few seconds before the first cappuccino is delivered.
3. Make sure the milk intake tube (D4) is correctly inserted in the bottom of the milk container lid (fig. 14);
4. Place the lid back on the milk container; 5. Remove the hot water spout (C6) from the connection noz-
zle (A8) (fig. 15); 6. Attach the container to the connection nozzle and push
as far as it will go (fig. 16). The machine emits a beep (if enabled); 7. Place a sufficiently large cup under the coffee spouts (A9) and frothed milk spout (D5). Adjust the length of the milk spout. To move it nearer the cup, simply pull it downwards (fig. 17); 8. Follow the instructions below for each function.

11.2 Adjusting the amount of froth Turn the froth adjustment dial (D1) to adjust the amount of froth on the milk delivered while making cappuccinos and milk-based coffees.

Dial

Description Recommended for…

position

No froth

HOT MILK (not frothed) / CAFFELATTE

Min. froth

LATTE MACCHIATO / FLAT WHITE

Max. froth

CAPPUCCINO/ CAPPUCCINO+ / ESPRESSO MACCHIATO / HOT MILK (frothed)

11.3 Making cappuccino and milk-based coffees automatically
1. Fill the milk container (D) and attach it as described above; 2. Select the required beverage:

Directly selected beverages:

· : CAPPUCCINO (B10)

· : Latte Macchiato (B11)

Select by pressing · Caffelatte

(B12):

· Flat white

· Hot milk

3. After a few seconds, preparation begins automatically, a

progress bar appears on the display and gradually fills as

preparation proceeds;

4. After delivering the milk, the machine automatically

makes the coffee (if required by the recipe).

Please note: · If you want to interrupt preparation during delivery, press
the arrow corresponding to “STOP” (B4). · Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer the quality of froth produced. · The beverages can be customised (see sections “8.3 Program beverages” and “8.4 Program My beverages”).

11.4 Cleaning the milk container after use
Important! Danger of burns · When cleaning the internal tubes of the milk container (D),
a little hot water and steam leak out of the milk spout (D5). Avoid contact with splashes of water.
“Set dial to CLEAN, ESC to cancel” appears on the display (B1) each time you use a milk function. Clean as described to eliminate all milk residues (or press ” /ESC” (B5) to clean later): 1. Leave the milk container (D) in the machine (you do not
need to empty it); 2. Place a cup or other recipient under the frothed milk spout; 3. Turn the froth adjustment dial (D1) to “CLEAN” (fig. 19).
“Cleaning underway” appears on the display, together with a progress bar which gradually fills as the operation proceeds. Cleaning stops automatically; 4. Turn the dial back to one of the froth selections; 5. Remove the milk container and always clean the steam connection nozzle (A8) with a sponge (fig. 20).
Please note! · To prepare a number of cappuccinos or milk-based coffees,
clean the milk container after you have prepared the last beverage only. In this case, press /ESC (B5) to go back to the main menu. · The milk container can be kept in the refrigerator. · In some cases, before cleaning you must wait for the appliance to heat up.

15

12. ”

” PROGRAMMING AND SELECTING

In

you can select beverages customised to your per-

sonal tastes. If the beverages have not yet been programmed,

the appliance will request the customisation procedure before

proceeding with delivery:

1. Press

(B13);

2. Press the selection arrows (B2 and B4) until the required

beverage is displayed between the two lines;

Unprogrammed beverages:

3. Press OK (B3) to select;

4. Beverages with coffee: “Program aroma” appears

on the display. Press the selection arrows (B2 and B4) or

(B7) until the required aroma is selected. Press OK.

“Program coffee” appears on the display together with a

bar which gradually fills as delivery progresses. When the

required quantity is reached, press OK.

5. Cappuccinos and milk-based coffees: After select-

ing the aroma, “Program milk” appears on the display

together with a bar which gradually fills as milk delivery

progresses. When the required quantity is reached, press

OK.

6. The appliance then makes the coffee. Press OK to interrupt

delivery when the required quantity of coffee is reached.

7. “Save parameters?”: to save the settings, press OK (other-

wise press ESC – B2 or B5).

8. “Parameters saved” (or “Parameters not saved”). The ap-

pliance is ready for use again.

Programmed beverages:

3. Press OK (B3) to select;

4. Preparation begins according to the previously pro-

grammed settings.

Please note: Two cups of a beverage can only be selected when the corresponding single beverages have been programmed.

13. DELIVERING HOT WATER

Important! Danger of burns.

Never leave the machine unattended while delivering hot water.

1. Make sure the hot water spout (C6) is attached correctly;

2. Place a container under the water spout (as close as possi-

ble to avoid splashes) (fig. 5);

3. Press

(B12) and scroll through the beverages

in the menu by pressing the selection arrows (B2 or B4)

until “Hot water” is selected;

4. Press OK (B3). A progress bar appears and gradually fills as

preparation proceeds;

5. The machine delivers about 250 ml of hot water, then

delivery stops automatically. To interrupt hot water deliv-

ery manually, press the selection arrow corresponding to “STOP” (B4) again.
Please note: · If “Energy Saving” mode is active, you may have to wait a
few seconds before hot water is delivered. · The quantity of water delivered can be customised (see
section “8.3 Program beverages”).
14. CLEANING 14.1 Cleaning the machine The following parts of the machine must be cleaned regularly: – the appliance’s internal circuit; – coffee grounds container (A11); – drip tray (A15) and condensate tray (A10); – water tank (A17); – coffee spouts (A9); – pre-ground coffee funnel (A4); – infuser (A20), accessible after opening the infuser door
(A19); – milk container (D); – hot water/steam connection nozzle (A8);
Important! · Do not use solvents, abrasive detergents or alcohol to clean
the coffee machine. With De’Longhi superautomatic coffee machines, you need not use chemical products to clean the machine. · None of the components of the appliance can be washed in a dishwasher with the exception of the drip tray grille (A14) and milk container (D). · Do not use metal objects to remove encrustations or coffee deposits as they could scratch metal or plastic surfaces.
14.2 Cleaning the machine’s internal circuit If the appliance is not used for more than 3/4 days, before using it again, we strongly recommend switching it on and: – performing 2/3 rinse cycles by pressing (B5); – delivering hot water for a few seconds (section “13. Deliv-
ering hot water”).
Please note: After cleaning, it is normal for the coffee grounds container (A11) to contain water.
14.3 Cleaning the coffee grounds container When “Empty grounds container” appears on the display (B1), the grounds container must be emptied and cleaned. The appliance cannot be used to make coffee until you have cleaned the grounds container (A11). Even if not full, the empty grounds container message appears on the display 72 hours after the

16

first coffee has been prepared. For the 72 hours to be calculated correctly, the machine must never be turned off with the main switch (A22).
Important! Danger of burns If you make a number of cappuccinos one after the other, the metal cup tray (A12) becomes hot. Wait for it to cool down before touching it and handle it from the front only.
To clean (with the machine on): · Remove the drip tray (A15) (fig. 21), empty and clean. · Empty the grounds container (A11) and clean thoroughly
to remove all residues left on the bottom. This can be done with the spatula on the brush (C5) provided. · Check the condensate tray (A10) (red) and empty if necessary.
Important! When removing the drip tray, the grounds container must be emptied, even if it contains few grounds. If this is not done, when you make the next coffees, the grounds container may fill up more than expected and clog the machine.
14.4 Cleaning the drip tray and condensate tray
Important! The drip tray (A15) is fitted with a level indicator (A13) (red) showing the level of water it contains (fig. 22). Before the indicator protrudes from the cup tray (A12), the drip tray must be emptied and cleaned otherwise the water may overflow the edge and damage the appliance, the surface it rests on or the surrounding area. To remove the drip tray: 1. Remove the drip tray and the coffee grounds container
(A11) (fig. 21); 2. Remove the cup tray (A12) and drip tray grille (A14), then
empty the drip tray and grounds container and wash all components; 3. Check the red condensate tray (A10) and empty if necessary; 4. Replace the drip tray complete with grille and grounds container.
14.5 Cleaning the inside of the coffee machine
Danger of electric shock! Before cleaning internal parts, the machine must be turned off (see section”7. Turning the appliance off”) and unplugged from the mains power supply. Never immerse the coffee machine in water.

1. Check regularly (about once a month) that the inside of the appliance (accessible after removing the drip tray, A15) is not dirty. If necessary, remove coffee deposits with the brush (C5) supplied and a sponge;
2. Remove all the residues with a vacuum cleaner (fig. 23).
14.6 Cleaning the water tank 1. Clean the water tank (A17) regularly (about once a month)
and whenever you replace the water softener filter (C4) (if provided) with a damp cloth and a little mild washing up liquid; 2. Remove the filter (C4) (if present) and rinse with running water; 3. Replace the filter (if provided), fill the tank with fresh water and replace the tank; 4. (Models with water softener filter only) Deliver about 100ml of water.
14.7 Cleaning the coffee spouts 1. Clean the coffee spouts (A9) regularly with a sponge or
cloth (fig. 24A); 2. Check that the holes in the coffee spouts are not blocked.
If necessary, remove coffee deposits with a toothpick (fig. 24B).
14.8 Cleaning the pre-ground coffee funnel Check regularly (about once a month) that the pre-ground coffee funnel (A4) is not blocked. If necessary, remove coffee deposits with the brush (C5) supplied.
14.9 Cleaning the infuser The infuser (A20) must be cleaned at least once a month.
Important! The infuser may not be extracted when the machine is on. 1. Make sure the machine is correctly turned off (see “7. Turn-
ing the appliance off”); 2. Remove the water tank (A17); 3. Open the infuser door (A19) (fig. 25) on the right side of
the appliance; 4. Press the two coloured release buttons inwards and at the
same time pull the infuser outwards (fig. 26); 5. Soak the infuser in water for about 5 minutes, then rinse
under the tap;
Important! RINSE WITH WATER ONLY NO WASHING UP LIQUID – NO DISH WASHER Clean the infuser without using washing up liquid as it could be damaged.

17

6. Use the brush (C5) to remove any coffee residues left in the infuser housing, visible through the infuser door;
7. After cleaning, replace the infuser by sliding it onto the internal support, then push the PUSH symbol fully in until it clicks into place;
Please note: If the infuser is difficult to insert, before insertion, adapt it to the right size by pressing the two levers (fig. 27). 8. Once inserted, make sure the two coloured buttons have
snapped out; 9. Close the infuser door; 10. Put the water tank back.
14.10 Cleaning the milk container Clean the milk container (D) each time you prepare milk as described below: 1. Remove the lid (D2); 2. Remove the milk spout (D5) and intake tube (D4) (fig. 28); 3. Turn the froth adjustment dial (D1) anticlockwise to the
“INSERT” position (fig. 29) and pull off upwards; 4. Wash all the components thoroughly with hot water and
mild washing-up liquid. All components are dishwasher safe, placing them in the top basket of the dishwasher. Make sure there are no milk residues on the hollow and groove under the dial (fig. 30). If necessary, scrape the groove with a toothpick; 5. Rinse inside the froth adjustment dial seat with running water (fig. 31); 6. Check that the intake tube and milk spout are not clogged with milk residues; 7. Replace the dial (in correspondence to the word “INSERT”), spout and milk intake tube; 8. Place the lid back on the milk container (D3).
14.11 Cleaning the hot water nozzle Each time you prepare milk, clean the connection nozzle (A8) with a sponge to remove milk residues from the gaskets (fig. 20).
15. DESCALING
Important! · Before use, read the instructions and the labelling on the
descaler pack. · You should use De’Longhi descaler only. Using unsuitable
descaler and/or performing descaling incorrectly may result in faults not covered by the manufacturer’s guarantee. Descale the machine when “Descale, ESC to cancel, OK to descale (45 minutes)” appears on the display (B1). To descale immediately, press OK (B3) and follow the instructions from point

6. To descale the appliance later, press ESC (B5). The symbol on the display reminds you that the appliance needs descaling. To access the descaling menu:

Turn the appliance on and wait until it is ready for use;
2. Press (B6) to enter the “Settings” menu; 3. Press the selection arrows (B2 and B4) until “Maintenance”
is displayed between the two lines. Press OK (B3); 4. Press OK to select “Descale”; 5. Confirm? (45 minutes)”. Press OK to confirm; 6. “Remove filter”: extract the water tank (A17), remove the
water softener filter (C4) (if present) and empty the water tank. Press OK; 7. “Pour descaler and water into tank”: Pour the descaler into the tank up to level A (corresponding to a 100 ml pack) marked on the inner surface of the tank, then add water (1 litre) up to level B (fig. 32) and put the water tank back. Press OK; 8. “Empty drip tray”: Remove, empty and replace the drip tray (A15) and grounds container (A11). Press OK; 9. “Place 1.8L container empty under spouts”: Place an empty container with a minimum capacity of 1.8 litres under the hot water spout (C6) and coffee spouts (A9) (fig. 33). Press OK;
Important! Danger of burns Hot water containing acid flows out of the coffee spouts and hot water spout. Take care to avoid contact with splashes of this solution.
1,8 l 10. “Descaling underway”: The descale programme starts and the descaler liq33 uid comes out of the hot water and coffee spouts. A series of rinses and pauses is performed automatically to remove all the scale residues inside the coffee machine; After about 25 minutes, descaling stops; 11. “Rinse tank and fill with water”: the appliance is now ready to rinse with fresh water. Empty the container used to collect the descaler solution. Extract the water tank, empty, rinse under running water, fill with fresh water up to the MAX level and put back in the appliance. Press OK; 12. “Place 1.8L container empty under spouts”: place the container used to collect the descaler solution empty under the coffee spouts and hot water spout (fig. 33) and press OK”; 13. “Rinsing Confirm?”: press OK;

18

11. “Rinsing underway”: hot water is delivered first from the coffee spouts, then from the hot water spout;
12. When the water in the tank has run out, empty the container used to collect the rinsing water;
13. “Rinse tank and fill with water”: extract the water tank and fill with fresh water up to the MAX level. Press OK;
14. “Insert filter”: put the water softener filter (if removed) back in its housing in the water tank, and replace the tank in the appliance. Press OK;
15. “Place 1.8L container empty under spouts”: place the container used to collect the descaler solution empty under the hot water spout. Press OK;
16. “Rinsing Confirm?”: press OK. 17. “Rinsing underway”. Hot water comes out of the hot water
spout; 18. “Empty drip tray”: At the end of the second rinse, remove,
empty and replace the drip tray (A15) and grounds container (A11). Press OK; 19. “Descale complete”: press OK; 20. “Fill tank”: empty the container used to collect the rinse water, remove the water tank and fill with fresh water up to the MAX level, then put back in the appliance. Descaling is complete.
Please note! · If the descaling cycle is not completed correctly (e.g. no
electricity) we recommend repeating the cycle; · After descaling, it is normal for the grounds container
(A11) to contain water; · If the water tank has not been filled to the MAX level, at
the end of descaling, the appliance requests a third rinse to guarantee that the descaler solution has been completely eliminated from the machine’s internal circuits. · The appliance may request descaling cycles at very short intervals. This is normal and due to the appliance’s advanced control system.
16. SETTING WATER HARDNESS The descale message is displayed after a period of time established according to water hardness. The machine is set by default for a hardness level of 4. The machine can also be programmed according to the hardness of the mains water in the various regions so that the machine needs to be descaled less often.
16.1 Measuring water hardness 1. Remove the “TOTAL HARDNESS TEST” indicator paper (C1)
from its pack (attached to the English instructions);

2. Immerse the paper completely in a glass of water for one second;
3. Remove the paper from the water and shake lightly. After about a minute, 1, 2, 3, or 4 red squares form, depending on the hardness of the water. Each square corresponds to one level;
soft water (level 1)
slightly hard water (level 2)
hard water (level 3)
very hard water (level 4)
16.2 Setting water hardness 1. Press (B6) to enter the “Settings” menu; 2. Press the selection arrows (B2 and B4) until “General” is
displayed between the two lines. Press OK; 3. Press the selection arrows until “Water hardness” is dis-
played, then press OK; 4. The current selection appears on the display and the new
selection flashes. Press the selection arrows until the required new selection is displayed. Press OK. The new level is saved and the appliance goes back to the “General” menu. Press /ESC (B5) twice to go back to the main screen.
17. WATER SOFTENER FILTER Certain models are fitted with a water softener filter (C4). If this is not the case with your model, you are recommended to purchase one from De’Longhi Customer Services. To use the filter correctly, follow the instructions below.
17.1 Installing the filter 1. Remove the filter (C4) from the packaging. The date indicator disk varies according to the filter provided. 2. Turn the date indicator
34 disk (fig. 34) until the
next 2 months of use are displayed.
Please note The filter lasts about two months if the appliance is used normally.

19

If the coffee machine is left unused with the filter installed, it will last a maximum of three weeks. 3. To activate the filter, run tap water through the hole in the
filter as shown in fig. 35 until water comes out of the openings at the side for more than a minute.;

13. The appliance begins hot water delivery and the message “Please wait” is displayed;
14. After the flow of hot water stops, the appliance automatically resets to “Ready for coffee” status.
The filter is now active and you can use the coffee machine.

0,5 L

35

36

4. Extract the tank (A17) from the appliance and fill with water;
5. Insert the filter in the water tank and immerse it completely for about ten seconds, sloping it and pressing it lightly to enable the air bubbles to escape (fig. 36).
6. Insert the filter in the filter housing (A18) and press as far as it will go (fig. 37);
7. Close the tank with the lid (A16) (fig. 38), then replace the tank in the machine;

17.2 Replacing the filter Replace the filter (C4) when “Replace filter, ESC to cancel, OK to replace” appears on the display (B1). To replace immediately, press OK (B3) and follow the instructions from point 8. To replace later, press ESC (B5). The symbol on the display reminds you that the filter needs replacing. To replace the filter, proceed as follows: 1. Extract the tank (A17) and exhausted filter; 2. Take the new filter out of its packet and proceed as illus-
trated in points 2, 3, 4, 5, 6 and 7 in the previous section;
3. Press (B6) to enter the “Settings” menu; 4. Press the selection arrows (B2 and B4) until “Maintenance”
is displayed between the two lines. Press OK; 5. Press the selection arrows until “Replace filter” is dis-
played, then press OK; 6. Confirm?”: press OK; 7. “Hot water, Confirm?”: Position a container under the hot
water spout (C6) (min. capacity: 500 ml), then press OK; 8. The appliance begins hot water delivery and the message
“Please wait” is displayed; 9. After the flow of hot water stops, the appliance automati-
cally resets to “Ready for coffee” status. The new filter is now active and you can use the coffee machine.
Please note! After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the filter even if the message has not yet been displayed.

37

38

When you install the filter, you must notify the appliance of its presence.
8. Press (B6) to enter the “Settings” menu; 9. Press the selection arrows (B2 and B4) until “Maintenance”
is displayed between the two lines. Press OK; 10. Press the selection arrows until “Install filter” is displayed,
then press OK; 11. Confirm?”: press OK; 12. “Hot water, Confirm?”: Position a container under the hot
water spout (C6) (min. capacity: 500 ml), then press OK;

17.3 Removing the filter If you want to use the appliance without the filter (C4), you must remove it and notify the appliance of its removal. Proceed as follows: 1. Extract the tank (A17) and exhausted filter;
2. Press (B6) to enter the “Settings” menu; 3. Press the selection arrows (B2 and B4) until “Maintenance”
is displayed between the two lines. Press OK; 4. Press the selection arrows until “Remove filter” is dis-
played, then press OK; 5. “Confirm?”: press OK to confirm removal. The appliance
goes back to the “Maintenance” menu; Press /ESC (B5) to exit the menu.

20

Please note! After two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the filter even if the message has not yet been displayed.

18. TECHNICAL DATA

Voltage:

220-240 V~ 50/60 Hz max. 10A

Absorbed power:

1450W

Pressure:

1.5MPa (15 bars)

Max. water tank capacity:

1.8 l

Size LxDxH:

240x440x360 mm

Cord length:

1750 mm

Weight:

9.9 kg

Max. beans container capacity:

300 g

This product complies with European regulation no. 1935/2004 on materials and articles intended to come into contact with food.
19. DISPOSING OF THE APPLIANCE The appliance must not be disposed of with household waste, but taken to an authorised waste separation and recycling centre.

20. DISPLAYED MESSAGES

DISPLAYED MESSAGE Fill tank Insert tank Empty grounds container
Insert grounds container Add pre-ground coffee
Fill beans container

POSSIBLE CAUSE

REMEDY

Insufficient water in the tank (A17).

Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place (fig. 3B).

The tank (A17) is not correctly in place.

Insert the tank correctly and press as far as it will go (page 3B).

The grounds container (A11) is full.

Empty the grounds container and drip tray (A15), clean and replace. Important: when removing the drip tray, the grounds container MUST be emptied, even if it contains few grounds. If this is not done, when you make the next coffees, the grounds container may fill up more than expected and clog the machine.

After cleaning, the grounds container (A11) Remove the drip tray (A15) and insert the

has not been replaced.

grounds container.

The “pre-ground coffee” function has been se- Place pre-ground coffee in the funnel (fig. 11) lected without placing any pre-ground coffee or deselect the “pre-ground” function. in the funnel (A4).

A LONG coffee with pre-ground coffee has been requested

Put one level measure of pre-ground coffee into the pre-ground coffee funnel (A4) and press OK (B3) to continue and complete preparation.

The coffee beans have run out.

Fill the beans container (A3) (fig. 8).

The pre-ground coffee funnel (A4) is clogged. Empty the funnel with the help of the brush (C5) as described in section “14.8 Cleaning the pre-ground coffee funnel”.

21

Ground too fine Adjust mill
Less coffee
Insert water spout Insert milk container Insert infuser assembly Water circuit empty Fill water circuit Hot water Confirm? Press OK to CLEAN
Set dial to CLEAN ESC to cancel Turn froth adjustment dial
Descale ESC to cancel OK to descale (45 minutes) Replace filter ESC to cancel OK to replace General alarm

The grinding is too fine and the coffee is delivered too slowly or not at all.

Repeat coffee delivery and turn the grinding adjustment dial (A5) (fig. 7) one click clockwise towards 7 while the coffee mill is in operation. If after making at least 2 coffees delivery is still too slow, repeat the correction procedure, turning the grinding adjustment dial another click until delivery is correct (see section “10.1 Adjusting the coffee mill”. If the problem persists, make sure the water tank (A17) is fully inserted.

If the water softener filter (C4) is present, an Insert the hot water spout (C6) in the appli-

air bubble may have been released inside the ance and deliver a little water until the flow

circuit, obstructing delivery.

becomes regular.

Too much coffee has been used.

Select a lighter taste by pressing (B7) or reduce the quantity of pre-ground coffee.

The hot water spout (C6) is not inserted or is Fully insert the hot water spout (fig. 4). inserted incorrectly.

The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (fig. 16).

The infuser (A20) has not been replaced after Insert the infuser as described in section “14.9

cleaning.

Cleaning the infuser”.

The water circuit is empty.

Press OK (B3) to deliver water from the spout (C6) until it flows out normally. If the problem persists, make sure the water tank (A17) is fully inserted.

The milk container (D) has been inserted with To proceed with the CLEAN function press OK

the froth adjustment dial (D1) in the “CLEAN” or turn the froth adjustment dial to another

position.

Milk has been delivered recently and the tubes Turn the froth adjustment dial (D1) to CLEAN inside the milk container (D) must be cleaned. (fig. 19).

The milk container (D) has been inserted with Turn the froth adjustment dial to one of the the froth adjustment dial (D1) in the “CLEAN” milk froth positions. position.

The machine must be descaled.

The descaling procedure described in section “15. Descaling”needs to be performed.

The water softener filter (C4) is exhausted.

Replace the filter or remove it as described in section “17. Water softener filter”.

The inside of the appliance is very dirty.

Clean the inside of the appliance thoroughly, as described in section “14. Cleaning”. If the message is still displayed after cleaning, contact a service centre.

22

ECO

The tubes inside the milk container (D) must Turn the froth adjustment dial (D1) to CLEAN

be cleaned.

(fig. 19).

The water softener filter (C4) is exhausted and Replace the filter or remove it as described in

must be replaced or removed.

section “17. Water softener filter”.

The machine must be descaled. Energy saving is enabled.

The descaling procedure described in section “15. Descaling”needs to be performed. The appliance may request descaling cycles at very short intervals. This is normal and due to the appliance’s advanced control system.
To disable energy saving, proceed as described in section “8.5 General”-“·Energy saving:”

23

21. TROUBLESHOOTING Below is a list of some of the possible malfunctions. If the problem cannot be resolved as described, contact Customer Services.

PROBLEM The coffee is not hot.

POSSIBLE CAUSE

REMEDY

The cups were not preheated.

Warm the cups by rinsing them with hot water (Please note: you can use the hot water function).

The internal circuits of the appliance have Before making coffee, rinse the internal circuits cooled down because 2/3 minutes have by pressing the button (B5). elapsed since the last coffee was made.

A low coffee temperature is set.

Set a higher coffee temperature in the menu.

The coffee is weak or not The coffee is ground too coarsely. creamy enough.
The coffee is unsuitable.

Turn the grinding adjustment dial (A5) one click anticlockwise towards 1 while the coffee mill is in operation (fig. 7). Continue one click at a time until coffee delivery is satisfactory. The effect is only visible after delivering 2 coffees (see section “10.1 Adjusting the coffee mill”).
Use pre-ground coffee for espresso machines.

The coffee is delivered too slowly or a drop at a time.
The appliance will not make coffee Coffee does not come out of one or both of the spouts.

The coffee is ground too finely.

Turn the grinding adjustment dial (A5) one click clockwise towards 7 while the coffee mill is in operation (fig. 7). Continue one click at a time until coffee delivery is satisfactory. The effect is only visible after delivering 2 coffees (see section “10.1 Adjusting the coffee mill”).

The appliance has detected impurities in its Wait for the appliance to be ready for use again internal circuits. “Please wait” is displayed. and reselect the required beverage. Contact
Customer Services if the problem persists.

The coffee spouts (A9) are blocked.

Clean the spouts with a toothpick (fig. 24B).

The appliance does not come It is not plugged into the mains socket.
on The main switch (A22) is not turned on.

Plug into the mains socket (fig. 1). Place the main switch in the I position (fig. 2).

The power cord (C7) connector is not inserted Insert the connector as far as it will go in the

correctly.

socket at the back of the appliance (fig. 1).

The infuser cannot be The appliance has not been turned off correctly Turn the appliance off by pressing the

extracted

button (A7) (fig. 6) (see section “7. Turning the

appliance off”).

24

At the end of descaling, the During the two rinse cycles, the water tank has Follow the instructions displayed by the appli-

appliance requests a third not been filled to the MAX level.

ance, but first empty the drip tray to avoid the

rinse

water overflowing.

The milk does not come out of The lid (D2) of the milk container lid is dirty Clean the milk container lid as described in the

the milk spout (D5)

section “15. Descaling”.

The milk contains large bubbles and squirts out of the milk spout (D5) or there is little froth

The milk is not cold enough or is not Use skimmed or semi-skimmed milk at refrig-

semi-skimmed.

erator temperature (about 5° C). If the result is

not as you wished, try changing brand of milk.

The froth adjustment dial (D1) is incorrectly Adjust following the instructions in section ”

adjusted.

· Espresso macchiato;”.

The milk container lid (D2) or froth adjustment Clean the milk container lid and dial as de-

dial (D1) is dirty

scribed in section “15. Descaling”.

The hot water connection nozzle (A8) is dirty Clean the connection nozzle as described in section .”14.11 Cleaning the hot water nozzle”.

25

22. ELECTRICAL REQUIREMENTS
Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your home, if you are in any doubt about your supply contact your local electricity company. The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse of 13 amp capacity. Should this plug not fit the socket outlets in your home, it should be cut off and replaced with a suitable plug, following the procedure outlined below. Note: Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket – with the obvious consequent danger. Please note: We recommend the use of good quality plugs and wall sockets that can be switched off when the machine is not in use. IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:
Green and Yellow to Earth

GREEN AND YELLOW BLUE BROWN

EARTH NEUTRAL LIVE

Blue to neutral

13 amp Fuse
Brown to live Cord Clamp

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: – The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or
by the earth symbol or coloured green or green and yellow. – The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. – The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. If your electricity supply point has only two pin socket outlets, or if you are in doubt, consult a qualified electrician. Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size. After replacement of a fuse in the plug, the fuse cover must be refitted. If the fuse cover is lost, the plug must not be used until a replacement cover is obtained. The colour of the correct replacement fuse cover is that of the coloured insert in the base of the fuse recess or elsewhere on the plug. Always state this colour when ordering a replacement fuse cover. Only 13amp replacement fuses which are asta approved to B.S. 1362 should be fitted. This appliance conforms to the Norms EN 55014 regarding the suppression of radio interference.
Warning – this appliance must be earthed

26