Q-Optics UI308 TTL Loupes Prismatic Swallow Dental Instruction Manual
- June 17, 2024
- Q-Optics
Table of Contents
Q-Optics UI308 TTL Loupes Prismatic Swallow Dental
Specifications
- Product Name: TTL Loupes
- Manufacturer: Q-Optics
- Contact Information:
- Local Phone: (972)298-2669
- US/Canada Phone: (800)858-2121
- Email: support@q-optics.com
Included in Your Kit:
Inside your loupe case, you will find the following:
- Loupes
- Replacement accessories
- Headlight accessories (if applicable)
- Prescription insert (optional)
INCLUDED IN YOUR KIT
INSIDE YOUR LOUPE CASE
- Your custom TTL Loupes
- Loupe Strap
- Replacement Nosepads
- Cleaning Solution
- Microfiber Cleaning Cloth
- Side Shields (Classic and Panto frames)
- RX Insert (Eclipse frame – if purchased) Replacement accessories are available online at:q- optics.com/shop
If your puchase also includes a headlight, you will find additional headlight accessories in your loupe case. For full details regarding your headlight, please review your headlight system manual.
Your loupe case style may vary.
QUICK DISCONNECT ACCESSORIES
HEADLIGHTS
-
Align the head-light mount channel opening to the Q-Optics logo mount on the frame of the loupes.
-
Slide the head-light onto the frame until fully seated.
PRESCRIPTION INSERT (OPTIONAL)
-
The mount for the RX Insert is located on specific Eclipse frames above the fixed nosepiece and will align with the channel mount on the backside of the RX Insert itself.
Align the frame mount to the channel mount on the RX Insert and slide downward onto the screws. Insert should set behind nosepads. -
Slide upward and off to remove.
ADJUSTING YOUR FIT
USING YOUR ACCESSORIES
Nosepads
Both saddle style and individual nosepads are installed and removed in the
same manner. Remove nosepad by sliding down the metal prongs on the frame.
Mount the new pad(s) by aligning the hole in the nosepad to the metal prong,
sliding pad upward over the ridges of the prong until fully seated.
Sport Straps
A strap is included to help keep your loupes in place while wearing. To attach the strap to your loupes, align the hole in the rubber tip of each end of the strap to one of the silicone tips of your loupe temple arms. You may need to to wiggle the rubber end to fit over the temple arm.
Side Shields
Right and left side shields will be indicated in print on each shield.
Set the narrowest section of the temple arm of the frame into the channel of
the correct side shield. Rotate the side shield to be upright, then slide
forward.
Once the side shield is pushed fully forward, the front lip will set just in front of the frame itself. Repeat the process for the other side shield.
CLEANING YOUR LOUPES
- Never soak your loupes or headlight, not even in water
- Never place loupes or headlights in an ultrasonic cleaner
- Use microfiber or cotton cloth to wipe (no paper products)
PROPER CARE AND MAINTENANCE
Proper storage and care over time will help maintain the optimal performance and fit of your loupes. Keeping them stored in the custom case that is provided and adhering to the guidelines provided in this guide will preserve the durability over many years of use.
WARRANTY
Q-Optics guarantees that your loupes are free from defects in material,
construction, and design for the LIFETIME of your practice.
Headlights, as electronic devices, are covered under a separate, limited
warranty.
To view the warranty in full, please visit:
www.q-optics.com/support/warranty/
Replacement parts
can be purchased online at:
www.q-optics.com/shop
Q-Optics / Quality Aspirators
1419 Godwin Lane • Duncanville, TX 75116 P: (972)298-2669 • F: (972)298-6592
www.q-optics.com
You may wish to keep these instructions for referance as well as the original packaging should you need to return your loupes for maintenance.
© 2023 Q-Optics. All rights reserved. Product specifications are subject to change at any time. UI308-10003-02, ECN 2158