MIYOTA Caliber 0S10 Watch Movement Instruction Manual
- June 11, 2024
- MIYOTA
Table of Contents
MIYOTA Caliber 0S10 Watch Movement Instruction Manual
CHRONOGRAPH FUNCTION: CENTER CHRONOGRAPH SECOND HAND 1/1 sec.
Timing up to 11 hours 59 minutes 59 seconds
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
C) SETTING THE DATE
D) USING THE CHRONOGRAPH
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
- DISPLAYS AND BUTTONS
B) SETTING THE TIME
-
Pull the crown out to the 2nd position.
-
Turn the crown to set hour and minute hands.
-
When the crown is pushed back to the normal position, small second hand begins to run.
-
SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
*If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the normal position.
**USING THE CHRONOGRAPH**
This chronograph is able to measure and display time in 1/1 second united up to
maxinum of 11 hours 59 minutes 59 seconds.
The chronograph second hand keeps continuously for
11 hours 59 minutes 59 seconds after starting. Measuring time with the
chronograph
Measuring time with the chronograph
1. The chronograph can be started and stopped each time button “A” is
pressed.
2. Pressing button “B” resets the chronograph and the chronograph second
hand,
chronograph minute hand, and chronograph hour hand return to zero position.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>