zelmer ZMM5801P Meat Mincer User Manual

: June 17, 2024
: zelmer

Table of Contents

zelmer ZMM5801P Meat Mincer
Product Information
Safety Instructions
Product Usage Instructions
FAQ
DESCRIPTION
INSTRUCTIONS FOR USE
MAINTENANCE AND CLEANING
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

zelmer ZMM5801P Meat Mincer

Product Information

Specifications

Model: ZMM5801P ZOSIA
Mincing Chamber: No. 8
Double side Hole Discs: 2.5mm, 4mm, 8mm
Sausage Stuffer: Included
Shredder: Included

Description

The ZMM5801P ZOSIA is a meat miner designed for grinding meat. It comes with a powerful drive unit and a mincing chamber. The mincer also includes a feed screw with an assembled coupling for efficient grinding. It has a double-sided knife for versatile cutting options. There are three hole discs included with sizes of 2.5mm, 4mm, and 8mm, allowing you to choose the desired fineness of the ground meat. The mincer also comes with a ring collar, food tray, pusher, and sausage stuffer accessory for making sausages.

In addition to the meat mincer function, the ZMM5801P ZOSIA also includes a shredder accessory. This accessory includes fine grating discs, coarse grating discs, and pureeing discs for various food preparation needs. The body of the appliance is sturdy and durable.

Safety Instructions

It is important to follow these safety instructions to ensure safe usage of the meat mincer:

If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent, or similarly qualified persons to avoid hazards.
Respect the operating times of the accessories indicated in their specific sections of the manual.

Product Usage Instructions

Meat Mincing

To use the meat mincer function of the ZMM5801P ZOSIA, follow these steps:

Make sure the appliance is placed on a stable surface.
Attach the mincing chamber to the drive unit.
Select the desired hole disc based on the fineness of the ground meat you want to achieve.
Place the meat into the mincing chamber.
Turn on the appliance using the switch on the drive unit.
Use the pusher to feed the meat into the mincing chamber while the appliance is running.
Continue feeding the meat until all is minced.
Once finished, turn off the appliance and unplug it from the power source.
Clean the mincing chamber, hole disc, and other removable parts following the cleaning instructions provided.

Shredding

The ZMM5801P ZOSIA also includes a shredder accessory for various food preparation tasks. To use the shredder, follow these steps:

Detach the mincing chamber from the drive unit.
Attach the shredder accessory to the drive unit.
Select the desired grating or pureeing disc based on your needs.
Place the food item to be shredded or pureed into the food tray.
Turn on the appliance using the switch on the drive unit.
Use the pusher to feed the food item into the shredder while the appliance is running.
Continue feeding the food item until it is shredded or pureed as desired.
Once finished, turn off the appliance and unplug it from the power source.
Clean the shredder accessory and other removable parts following the cleaning instructions provided.

FAQ

Q: How do I clean the meat miner and shredder accessory?
A: Before cleaning, always make sure to turn off the appliance and unplug it from the power source. Do not immerse the appliance or power cord in water or other liquids, and do not clean them in a dishwasher. It is recommended to clean the appliance immediately after use for easier cleaning. To disassemble the appliance, follow the assembly steps in reverse order. When disassembling the mincing chamber or shredder body, press the lock button with one hand.
Q: How long can I use the meat miner continuously?
A: The uninterrupted working time should not exceed 10 minutes. After 10 minutes of continuous usage, it is recommended to stop using the appliance and let it cool down before using it again.
Q: What are the safety precautions I should take?
A: It is important to replace a damaged supply cord with the help of a qualified person. Also, make sure to respect the operating times of the accessories mentioned in their specific sections of the manual.

WE WOULD LIKE TO THANK YOU FOR CHOOSING ZELMER. WE HOPE THE PRODUCT PERFORMS TO YOUR SATISFACTION AND PLEASURE.

TYPES OF ZELMER MEAT MINCERS
Below, you can see an assortment of equipment anticipated for meat mincers, which the user manual refers to.

MODEL

| Mincing chamber no 8| Double side knife| 2,5 mm hole disc| 4 mm hole disc| 8 mm hole disc| Sausage stuffer| Shredder| Tomato juicer
---|---|---|---|---|---|---|---|---
ZMM5801P ZOSIA| | | | | | | | **
ZMM5802P ZOSIA**| | | | | | | |

DESCRIPTION

Drive unit
a Switch
Mincing chamber
Feed screw with assembled coupling
Double side knife
2,5 mm hole disc
4 mm hole disc
8 mm hole disc
Ring collar
Food tray
Pusher
Sausage stuffer
Separator
Mechanical safety device for the motor
Scroll
Clutch
Screw
Shredder accessory
Fine grating disc
Coarse grating disc
Pureeing disc
Body
Pusher
Food tray

zelmer-ZMM5801P-Meat-Mincer-FIG-1 zelmer-
ZMM5801P-Meat-Mincer-FIG-2 zelmer-ZMM5801P-Meat-Mincer-
FIG-3

SAFETY INSTRUCTIONS
If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid a hazard.
Respect the operating times of the accessories indicated in their specific sections of the manual.

Proceed according to the maintenance and cleaning section of this manual for cleaning. Warning: potential injury from misuse!
Care shall be taken when handling the sharp-cutting knives and during cleaning.
Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
Switch off the appliance and disconnect from the supply before changing accessories or approaching parts that move in use.
This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and if they understand the hazards involved. Children shall not play with the appliance.
The device is intended for domestic use only. It is not intended for use in applications such as:
- employee kitchens in stores, offices and other work environments
- farms
- by customers in hotels, motels and other environments residential
- bed and breakfast environments
This appliance is intended for use at a maximum altitude of 2000m above sea level.

IMPORTANT WARNINGS

This appliance is designed for home use and should never be used for commercial or industrial use under any circumstances. Any incorrect use or improper handling of the product shall render the warranty null and void.
Before plugging in the product, check that your mains voltage is the same as the one indicated on the product label.
The main connection cable must not be tangled or wrapped around the product during use.
Do not use the device, or connect and disconnect to the supply mains with the hands and/or feet wet.
Do not pull on the connection cord to unplug it or use it as a handle Unplug the product immediately from the mains in the event of any breakdown or damage and contact Do not pull on the connection cord to unplug it or use it as a handle.
Do not process tough foods, such as bones, nuts (such as dry and hard soybeans) or other food with tough fiber.
Please utilize the pusher during operation, instead of pushing food by hand.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact an official technical support service. To prevent any risk of danger, do not open the device. Only qualified technical personnel from the brand´s Official technical support service may carry out repairs or procedures on the device.
B&B Trends S.L. disclaims all liability for damages that may occur to people, animals or objects, for the non-observance of these warnings.

INSTRUCTIONS FOR USE

Meat Grinder

The continuous operation should not exceed 10 minutes; suspend the operation in the event of exceeding 10 minutes and restart the machine after cooling down.
Preparing the meat mincer to work and the actuation of the appliance Place the drive unit (1) close to the power network socket, on a firm surface so as not to cover the ventilation holes within the casing.
Before the first use of the meat mincer, wash the equipment elements.
Assemble the appropriate equipment and join it with the drive unit.
Plug in the unit.
Turn the meat mincer on with the main switch (1. a)

Operating the mincing set

Insert the following parts into the mincer body (2):
Insert the scroll (3) with the coupling facing inside. Fit the knife (4) onto the pin of the scroll (3).
Place the disc (e.g. 5) over the knife so that the protrusion in the mincer body will fit into the groove in the circumference of the disc.
Tightly fit all the elements of the mincer unit.
Fit the assembled mincer unit onto the drive unit (1) and turn it until you hear a click of the lock. It means
that the body has been properly installed.
Place the tray (11) on the mincer body (2).
NB: Use only the pusher (8) to push products.

Operating the sausage stuffer

Insert the following parts into the mincer body (2): Insert the scroll (3) with the coupling facing inside. Fit the insert (11) onto the pin of the scroll (3).
Fit the sausage stuffing tube (10).
Tightly fit all the elements with the threaded ring (6). Fit the assembled mincer unit onto the drive unit (1) and turn it until you hear a click of the lock.
Place the tray (7) on the mincer body (2).
Soak the casing for about 10 minutes before fitting. Fit the wet casing on the sausage filler nozzle.
NB: Make sure not to block the ventilation openings on the nozzle.
NB2: The meant cannot be “too thin”. A large liquid content may cause its leakage to the inside of the mincer.

Shredder
The shredder is equipped with 3 discs. Two graters for grinding into smaller (16) and larger (17) chips (yellow cheese, carrots, celery, cooked beets, etc.). The third cutting disc (drum disc) is used for mashing vegetables (potatoes, beetroot, etc.) and fruit.

Operating the shredder

Assemble the chamber of the shredder (19) just as like mincing chamber.
Place the required cutting rolls (16-18) on the feeding tube, and make sure the bottom of the cutting rolls is tightly compacted to the salad tube.
Cut large products into smaller elements, which you can easily put into the mincing chamber.
Do not mash soft fruits containing stones.
When the work is finished pull the power cord out from the network supply \socket.
Remove the food remaining in the shredder chamber or on the grater with a wooden spoon.
NB: The blades of the disc do not require any regeneration.

Mechanical safety device for the motor
The meat mincer is equipped with mechanical protection, which secures the motor against any damage –teeth of the coupling break when the meat mincer is overloaded (f. ex. when bones have entered into the mincing chamber).
The broken coupling should be replaced with a new one:

unscrew the coupling from the feed screw (3),
remove the broken coupling (2),
put on the new coupling (2) and screw it (3).

After the work has been finished

Turn off the unit and unplug it.
Remove the pusher (8) and remove the food tray from the mincing chamber (2) or the shredder chamber.
Press the safety lock turn the mincing set or the grating chamber to the right and take it off.
Take apart all the elements of the mincing set, the chamber with the sausage stuffer or the shredder.

MAINTENANCE AND CLEANING

Before cleaning, always turn off the appliance and unplug it from the power supply.
Do not immerse the appliance and power cord in water or other liquids or wash them in the dishwasher.
Prompt: it is suggested that the appliance immediately after use, which is easy to clean.
In the event of disassembling the appliance, rotate the appliance in the opposite direction of the installation direction.
When disassembling all mincing chambers or the body of the shredder, press the lock button with one hand and screw off the mincing chamber or body of the shredder with the other hand as in the direction of the arrow shown in the right picture.
Please be careful for the disassembly of the appliance, so as not to scratch your fingers.
Do not use abrasives, scrubbers, acetone and alcohol to clean the juicer.
Since some parts are relatively sharp, clean them with a brush, so as not to scratch fingers;
Neither immerse the motor in water nor rinse it under the water tap. The water temperature for cleaning should not exceed 60 ° C.
Only plastic parts are suitable for dishwashing machines.
It is forbidden to wash metal accessories in the dishwasher, as the aggressive cleaning agents used in these devices may discolour the metal parts and damage them.
Those parts should be rinsed under running water and dried immediately.

Table of recipes
The continuous operation should not exceed 10 minutes; suspend the operation in the event of exceeding 10 minutes and restart the machine after cooling down.

Accessory	Load	Quantity	Time of operation
Mincer function	Beef	5.0 kg	10 minutes
Shredder and grater	Soaked carrots	0,5 kg	1 minute
Tomato juicer	Tomato	0,3kg	1 minute

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic devices, known as WEEE (Waste Electrical and Electronic Equipment), and provides the legal framework applicable in the European Union for the disposal and reuse of waste electronic and electrical devices. Do not dispose of this product in the bin, instead go to the electrical and electronic waste collection centre closest to your home.