Lamborghini AL1 Electric Scooter User Manual
- June 4, 2024
- Lamborghini
Table of Contents
- PACKAGE CONTENTS
- PRODUCT OVERVIEW
- ASSEMBLY AND CONFIGURATION
- CHARGING
- APP CONFIGURATION
- HOW TO RIDE THE ELECTRIC SCOOTER
- BRAKES
- RANGE
- STORAGE AND CLEANING
- SAFETY INSTRUCTIONS
- BATTERY (WARNINGS)
- RESPONSIBILITIES
- FOLDING, TRANSPORT AND OPENING
- DAILY MAINTENANCE AND CARE
- TECHNICAL SPECIFICATIONS
- TROUBLESHOOTING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
USER MANUAL
For more information, technical support, and assistance, contact your dealer or visit the website www.alemobility.com
PACKAGE CONTENTS
The handlebar must be fitted to the assembled electric scooter using the special screws provided. The screws must be inserted first without tools, then tightened using the tool provided.
PRODUCT OVERVIEW
CONTROL INFORMATION / CONTROL PANEL
- Speedometer: displays the current speed of the electric scooter.
- Modes: there are three driving modes available. “S Black” indicates Energy Saving mode (maximum speed 6 km/h, ideal for beginners), “S White” indicates Standard mode (maximum speed 15 km/h), and “S Red” indicates Sports mode (maximum speed 25 km/h, powerful, only recommended for experienced riders).
- Bluetooth: the icon indicates that the scooter is connected with the mobile device.
- Error: the spanner-shaped icon indicates that the scooter has detected an error.
- Battery level: the battery level is indicated by five bars, each representing approximately 20% of the battery.
- Power button: press the button to turn the electric scooter on; to turn it off, press and hold the button for three seconds. After switching on, press the button twice consecutively to turn the headlights on/off and press once to switch from one mode to another.
ASSEMBLY AND CONFIGURATION
After assembly, press the power button to check that the electric scooter is working properly.
CHARGING
APP CONFIGURATION
What can you do with the AL E-MOBILITY APP?
- Start a self-diagnosis
- Set the driving modes
- Set the speed unit of measurement (km/mph)
- Set the start mode
- Set the Cruise Control function
- Set the LED ambient light color (RGB)
- View the partial and total kilometers travelled
- View the remaining battery level
- Display cruising speed
- Display speed modes
- Display the temperature of the driving wheel
Access the preferred app store to download and install the AL E-MOBILITY APP
- Download the app on the smartphone;
- Turn on the e-scooter and activate the Bluetooth function on the smartphone;
- Start the app and log in, connect your smartphone to the electric scooter via Bluetooth within 1-2 metres;
If this is your first time using this app, fill in the “e-mail” field to register and authenticate by using the verification code.
The app’s interface appears as follows:
The app’s interface with the associated electric scooter appears as follows:
Main interface
The app’s interface with the associated electric scooter appears as follows:
Information on “Cruise Control”:
Activate the “Cruise Control” function in the app, keep the electric scooter
at a constant speed (> 8 km/h) and hold down the accelerator lever (right) for
five seconds. An acoustic signal will indicate that “Cruise Control” is
active, meaning it will not be necessary to keep the accelerator lever (right)
held down. Press the accelerator lever or brake lever again to deactivate the
function.
Information on the “Zero Start” mode: The Zero Start mode, if activated,
allows you to start the electric scooter by operating the accelerator without
having to push off with the feet.
HOW TO RIDE THE ELECTRIC SCOOTER
follow the safety instructions before riding the electric scooter. Use approved equipment such as helmets and knee pads.
Do not use the electric scooter in the rain. The electric scooter cannot be used by more than one person at a time.
Children under the age of 16 and pregnant women should not use this electric
scooter. Minimum weight allowed on the electric scooter: 20 kg.
Maximum weight allowed on the electric scooter: 100 kg.
Do not ride the electric scooter if you have been drinking alcohol and/or taking medicines.
Do not use your phone or listen to music while riding the electric scooter.
Pay particular attention if you are riding where there are road bumps, sand, puddles, frost, snow or steps, or in dark places and at night or in wet conditions.
Do not use the electric scooter in dangerous areas, in the presence of flammable and/or explosive substances, liquids and/or dirt.
This electric scooter is not designed to be ridden on roads and motorways.
To find out where the electric scooter can be ridden, consult the legislative
decree in force in the country concerned.
Do not place heavy objects on the handlebar. Avoid going up or down steps with the electric scooter.
Always ride with both hands on the handlebar.
Do not ride on the electric scooter standing on just one foot. Do not press the accelerator when walking with the electric scooter.
Do not ride the e-scooter in puddles or on wet surfaces.
Pay attention to your head when passing under canopies, doors and the like. When riding at the highest permitted speed, do not turn the handlebar abruptly. Start braking sufficiently far away to avoid obstacles, bends, and areas with uneven surfaces. Remember to release the accelerator before braking.
Do not travel at the highest speed allowed, on obstacles such as steps, borders or bumps.
Do not hit obstacles with the wheels.
Do not touch the motor immediately after riding, it could be extremely hot. Maintain a minimum safety distance of 5 m from other vehicles.
For your own safety, wear a helmet and knee pads to protect yourself from any
falls and injuries.
The rider assumes all risks for not wearing a helmet or other protective gear.
-
When you use it for the first time, charge the e-scooter to 100%. Check the battery indicator; if the battery is low, recharge it before use. The e-scooter is a device that requires periodic recharging in order to function.
-
Place the electric scooter on a flat surface.
-
Put your hands on the handlebar. Step onto the footboard with one foot and use the other to give yourself a gentle push-off.
For safety reasons, the electric scooter is initially set up to avoid a standing start. -
When the electric scooter begins to move, place both feet on the footboard and press the accelerator. Note: the accelerator is activated once the forward speed exceeds 3 km/h.
-
To ride the electric scooter, tilt your body in the direction of travel when turning and slowly turn the handlebar.
-
To stop the electric scooter, release the accelerator, press the electronic brake on the left-hand side of the handlebar and if necessary press the rear mudguard with your foot.
-
Before getting off, bring the electric scooter to a complete stop. Trying to get off the electric scooter while it is in motion can cause injury.
-
When changing mode, single-click the power button to change the speed mode.
-
When driving at night or in dark places, double-click the power button to turn on the lights, and wear a reflective vest.
BRAKES
The electric brake lever is located on the left-hand side of the handlebar.
The electric scooter is also equipped with a foot brake on the rear mudguard.
When driving on a slippery road and/or while turning, it is recommended to use
the brake with caution, otherwise, you may lose control of the electric
scooter and fall off. As with other
vehicles, higher speeds require longer braking distances. Sudden braking on
low-grip surfaces could cause an accident.
Be careful and always keep the necessary safety distance from other people
and/or vehicles while riding.
RANGE
The maximum range depends on several variables:
Terrain: the range is greater when riding on a smooth surface than when
driving on bumpy roads and slopes.
User weight: the heavier the user, the shorter the range.
Temperature: riding the electric scooter in a very cold or very hot
environment affects and reduces the range. Speed and riding style: riding
smoothly and at a constant speed extends the range. Acceleration and
maneuvering significantly reduce the range. A lower speed extends the range.
Maintenance: timely recharging and correct maintenance increase the
range.
STORAGE AND CLEANING
Charge the scooter 50% – 60% before storing it out of season or for extended periods. Recharge it to 50% – 60% every 30 days. If not used daily, it is advisable to store the electric scooter at 15-25°C. Do not expose the electric scooter to low (below 0°C) or high (over 45°C) temperatures. Avoid leaving it out of doors, as it is not water-resistant. When the scooter gets dirty, clean it with a damp cloth. Before cleaning it, make sure the electric scooter is turned off and cover the charging port to prevent damage to the electronic components. Do not use alcohol, petrol, kerosene or other corrosive and volatile chemical solvents. This can damage both the appearance and the internal structure of the electric scooter. Do not use pressurized water jets or running water for cleaning. The electric scooter is not waterproof. Do not expose it to rain or water, or immerse it in water to wash it.
SAFETY INSTRUCTIONS
- This electric scooter is a motor vehicle. Mastering riding it requires practice.
- This product is an electric scooter for adults. Use is limited to just one person at a time. Do not carry other people at the same time. Children under 18 should use it only under adult supervision. Riding is not permitted for children under 16.
- When riding the electric scooter, wear a safety helmet and other protective equipment.
- Do not ride the electric scooter in unsafe places or in breach of the regulations of the respective government.
- Do not make dangerous movements or ride with one hand; keep your feet on the footboard. Do not turn off the power while the electric scooter is running.
- Before riding, check if fasteners are loose and/or any components are damaged. In this case, it is advisable not to use the product. If this electric scooter emits abnormal sounds or alarms, stop riding immediately and contact your local service center.
- Do not attempt to climb steps with a gap greater than 3 cm, as this could cause the electric scooter to overturn, resulting in injury to the rider or damage to the vehicle. Avoid steps under 3 centimeters as much as possible.
- In the event of rough or bumpy road conditions, slow down or get off. Do not ride the electric scooter on slippery surfaces, such as in the presence of oil or ice.
- Do not use this product in an environment with a temperature below 0°C.
- Do not immerse the product deeper than 3 cm to avoid damage to the electrical part of the vehicle.
- Avoid driving in bad weather, such as rain, snow, strong winds, etc., so as not to cause damage from environmental factors.
- Only MT Distribution approved parts and accessories may be used. Do not modify the electric scooter. Modifying your electric scooter can affect its operation, causing serious injury and/or damage and compromising your warranty. Contact the service center at www.alemobility.com if you need any spare parts.
BATTERY (WARNINGS)
Make sure the electric scooter, charger and charging port are dry. When the
electric scooter is fully charged, the LED light on the charger changes from
red (charging) to green (charging completed). Use only the original charger.
Other chargers may damage your device and pose other potential risks. The
electric scooter should not be charged for extended periods. Overcharging
reduces battery life and may cause other potential risks. Charge the electric
scooter in a dry environment away from flammable materials (e.g. materials
that could burst into flames), preferably at an internal temperature of
1525°C, but never below 0°C or above +45°C. Do not charge in direct sunlight
or near a fire. Do not charge the electric scooter immediately after use. Let
the electric scooter cool down for one hour before charging. Never leave the
electric scooter unattended while charging. Thermal risk: never connect the
charging socket with metal objects. Read the charging and storage sections
above to ensure you maintain and handle the battery properly. Keep the
electric scooter away from open flames or other heat sources to prevent the
battery from overheating. Do not leave the electric scooter exposed to
freezing temperatures. Both excessive heat and cold can drain the battery.
Avoid completely discharging the battery. It is best to recharge the battery
while there is still some charge left. This prolongs the life of the battery.
When the charge is too low, it is not possible to drive normally. This may
lead to the rider losing control or falling off. Make sure the battery is
charged at regular intervals, even if you do not use the electric scooter for
an extended period. This prevents damage to the battery caused by low voltage
over an extended period.
Battery precautions: The battery is made up of lithium-ion cells and
chemical elements that are hazardous to health and the environment. Do not
ride the electric scooter if it is emitting odors, substances or excessive
heat. Do not dispose of the electric scooter or battery with household waste.
The end user is responsible for disposing of electrical and electronic
equipment and batteries in compliance with all applicable regulations in the
country concerned..
What to avoid:
- Opening, dismantling, hitting, throwing or piercing the battery or attaching objects to it.
- Touching any substances leaking from the battery, as it contains hazardous substances.
- Letting children or pets touch the battery.
- Over-charging, over-discharging or short-circuiting the battery.
- Immersing or exposing the battery to water or other liquid.
- Exposing the battery to excessive heat or cold.
- Exposing the battery to an environment containing explosive gases or flames.
- Leaving the battery in rain or direct sunlight or in a hot car in direct sunlight.
- Reassembling or refitting the battery.
- Carrying or storing the battery together with metal objects such as hairpins, necklaces, etc.
- Riding the electric scooter while charging.
- Using any charger other than the original.
RESPONSIBILITIES
The rider is obliged to use the electric scooter with the utmost diligence and in full compliance with current legislation regarding the use, operation and riding of the electric scooter which, merely by way of example, is set out in Italian Legislative Decree no. 285/1992 (“Highway Code”). The rider is also obliged to keep the electric scooter clean and in a perfect state of efficiency and maintenance, to diligently carry out the safety checks under their responsibility, as described in the warnings and recommendations section, and to keep all the documentation regarding the maintenance of the electric scooter. The rider must carefully evaluate atmospheric conditions that could make it dangerous to use the electric scooter. To this end, we recommend moderating your speed and maintaining an adequate braking distance if you are in adverse weather conditions and/or in the case of heavy traffic. The electric scooter can only be ridden by riders at least 16 years old. Children under 18 are required to wear a suitable protective helmet. For children under the age of 18, it is advisable to use an electric scooter under adult supervision. In the event of product malfunction for reasons not attributable to incorrect rider behavior, please contact the support center on the website www.alemobility.com
FOLDING, TRANSPORT AND OPENING
The electric scooter must be turned off before being folded up.
Transport
Hold the handlebar rod with one hand or both hands.
Opening
DAILY MAINTENANCE AND CARE
Cleaning and storage: If there are stains on the body of the electric scooter, wipe them off with a damp cloth. If stains persist, put toothpaste on them, brush them with a toothbrush, then wipe them with a damp cloth. If there are scratches on the plastic components, use sandpaper or other abrasive material to remove them. Notes: do not clean the electric scooter with alcohol, petrol, kerosene, or other corrosive and volatile chemical solvents, to avoid serious damage. Do not wash the electric scooter with high-pressure water jets. When cleaning, make sure the electric scooter is turned off, the charging cable disconnected and the rubber cap closed, as a water leak could cause an electric shock or other serious problems. When the electric scooter is not in use, store it indoors in a cool, dry place. Do not store it outdoors for an extended period of time. Excessive sunlight, overheating and excessive cold accelerate tire aging and compromise the life of both the electric scooter and the battery.
Battery maintenance:
- Do not use batteries of other models or brands, as they may pose a safety risk.
- Do not disassemble, crush or puncture the product. Do not touch the battery contacts. Do not dismantle or puncture the outer casing. Avoid letting the product come into contact with water and fire and do not expose it to temperatures above 45°C (including heat sources such as stoves, heaters, and so on). Avoid contact between metal objects and battery terminals to prevent short circuits, physical harm or death.
- Water seeping into the battery can cause damage to internal circuits and risk of fire or explosion. If you are not sure if water has infiltrated the battery, discontinue use of the electric scooter immediately and return it to the after-sales service at your dealer for inspection.
- Use only the original charger to avoid potential damage or fire.
- Improper disposal of used batteries seriously pollutes the environment. Observe the regulations of the country concerned regarding the disposal of batteries, to protect the environment.
- After each use, fully recharge the battery to extend its useful life. Do not store the battery in an environment where the temperature is above 45°C or below 0°C (for example, do not leave the electric scooter or battery in a car in direct sunlight for an extended period of time). Do not throw the battery into flames as this could lead to failure, overheating and even a fire. If you do not plan to use the electric scooter for more than 30 days, recharge the battery to 50/60% and store it in a cool, dry place. Remember to recharge it every 60 days to protect it from any damage excluding it from the limited warranty. Always recharge the battery before it runs out to extend its useful life. If the battery is not recharged periodically or if the electric scooter is not recharged after the last use, there is a risk of irreversible damage to the battery. This damage is not covered by the limited warranty. Dismantling the battery is prohibited and qualified personnel should be consulted as this could result in electric shock, short circuits or even major safety incidents.
TECHNICAL SPECIFICATIONS
Basic info
Frame | Magnesium alloy |
---|---|
Suspension | Front Suspension |
Speed | ECO: <= 6km/h |
Maximum gradient | 12% |
Brakes | Dual brake: electric brake and mechanical brake |
Motor | 350W |
Tyres | 8” front and rear honeycomb tires |
Low voltage protection | 31V +/- 0.5V |
Current limit | 13A |
Engine type | Brushless |
Maximum load | 100kg |
Safety information | 16+ yo / 130-200 cm height max, recommended use with |
helmet and protection
Working Temperature| 0°C / 45°C
Level of protection| IPX5
Charging time| Approximately 3/5 hours
Range| 25-30 km (traveling at an average speed of 20 km/h subject to
variations based on the rider’s weight, road conditions, temperature, etc.)
*In Switzerland, speed limits are 6–15–20 km/hr, as per current legislation.
Electric sistem
Engine | 350W Brushless |
---|---|
Brake | Front electric |
Display | Smart display with speed, distance, battery power, fault alarm, and |
error code
Battery| 36V 7.8Ah 280Wh
Lights| Headlight / taillight / LED side light
Charger| EU Standard DC 2.1 Charger, 42V 2A
App/Bluetooth| Android / iOS
Dimensions and Weights
Net weight | 13kg |
---|---|
Gross weight | 15kg |
Unit size | 1180 x 530 x 1160mm |
TROUBLESHOOTING
Tests to be carried out:
- After a fall, check that the accelerator lever works properly. To do this, accelerate and decelerate several times.
- Check from time to time that the brakes are working properly. To do this, move the electric scooter by pushing it manually and brake suddenly to make sure it re sponds to the command.
- Check that all the components of the electric scooter are in place and securely fastened.
- Check the wear of the tyres.
Error | Cause | Solution |
---|---|---|
The motor is not running | The battery is dead | Charge the battery |
Electrical problem | Request technical support from your dealer | |
The motor stops while it is running | Motor overheating | Release the |
accelerator and wait for it to cool
After it has been charged, the vehicle turns itself off| The battery is
damaged| Request technical support from your dealer
The vehicle stops suddenly while it is running| Damaged power cables and
controls| Request technical support from your dealer
The battery does not charge or the scooter does not turn on| Connection
problems| Request technical support from your dealer
Damaged/dead battery| Request technical support from your dealer
Problems with the charger| Request technical support from your dealer
If necessary, contact technical support on the website www.alemobility.com
ERROR CODE TABLE
Error Code | Indications |
---|---|
E.0 | Brake failure |
E.1 | Accelerator failure |
E.3 | Connection failure |
E.4 | Motor failure |
E.5 | Motor cable failure |
E.6 | Control unit failure |
E.7 | Overcharge |
E.8 | Power supply failure |
WARNING:
Excessive discharge protection
The electric scooter in an excessive discharge protection state must be
reactivated by charging. If the electric scooter remains off after charging
half an hour, contact your
dealer for assistance. Check the battery charge level with the vehicle
stationary.
ATTENTION
Disposing of electrical or electronic devices at the end of their life
(applicable in all European Union countries and in other European systems with
separate collection systems)
This symbol on the product or packaging indicates that the product should not
be considered as normal household waste, but instead taken to an appropriate
collection point for recycling electrical and electronic equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent
potential negative consequences for the environment and human health which
could otherwise be caused by inappropriate disposal.
Recycling materials helps to conserve natural resources.
For more detailed information about recycling this product, you can contact
the municipal office, the local waste disposal service or the point of sale
where the product was purchased.
Specifically, consumers must not dispose of WEEE as municipal waste but dispose of it separa- tely, in two possible ways:
- At municipal collection centers (also called eco-stations, recycling points), directly or via the collection services of municipal companies, where available;
- At sales outlets selling new electrical and electronic equipment.
Here, very small WEEE (with the longest side less than 25 cm) can be left free of charge, while larger ones can be left on a 1-for-1 basis, i.e. you can leave the old product when you buy a new one with the same function.
In the event of illegal disposal of electrical or electronic equipment, the penalties provided for by current legislation on environmental protection may be applied (Italian legislation; it is necessary to check the regulations in force in the country of use/disposal of the vehicle). If WEEE contains batteries or accumulators, these must be removed and disposed of via speci- fic separate waste collection.
ATTENTION
Disposal of dead batteries (applicable in all European Union countries and
in other European systems with separate collection systems)
This symbol on the product or packaging indicates that the battery pack should
not be considered normal household waste.
On some types of batteries, this symbol may be used in combination with a
chemical symbol. The chemical symbols for mercury (Hg) or lead (Pb) are added
if the battery contains more than 0.0005% mercury or 0.004% lead. By ensuring
that battery packs are disposed of correctly, you will help prevent potential
negative consequences for the environment and health which could otherwise be
caused by inappropriate waste handling. Recycling materials will help to
conserve natural resources. Where for safety, performance or data protection
reasons, products require a fixed connection to an internal battery/cell, this
must only be replaced by qualified service personnel. At the end of its life,
deliver the product to a collection point suitable for the disposal of
electrical and electronic equipment: this will ensure that the battery inside
is also disposed of correctly. For more detailed information about disposing
of the exhausted battery or the product, contact the municipal office, the
local waste disposal service or the point of sale where the product was
purchased. According to Italian Legislative Decree 49/2014, the product falls
within the EEE (electrical and electronic equipment) management of WEEE
(separate waste collection).
NOTICES
Read the manual and instructions below in full before using the product.
Product name: AL1
Product type: Electric scooter
Year of production: 2020
Note:
-
To recharge this electric scooter ONLY use the charger supplied labeled BC266420200 with the following output voltage: 42V, 2A.
-
Using another type of charger can damage the product or pose other potential risks.
-
Never leave the product to charge unsupervised.
-
The charging time of the product must not exceed four hours. Stop charging after four hours.
-
The product should only be charged at temperatures between 0°C and 45°C.
-
If charged at lower or higher temperatures, there is a risk that the battery will offer reduced performance, potentially resulting in damage to the product and personal injury.
-
The product must be used only at temperatures between 0°C and 45°C.
-
If used at lower or higher temperatures, there is a risk that the battery will offer reduced performance, potentially resulting in damage to the product and personal injury.
-
Store the product at temperatures between 0°C and 45°C (the optimum storage temperature is 25°C).
-
Recharge and store in a dry and open place, away from combustibles (i.e. any flammable element).
-
Do not recharge in sunlight or near open flames.
-
Do not recharge the product immediately after use. Allow the product to cool for an hour before charging.
-
If you are away for a certain period of time, for example for holidays, and you entrust the device to a third party, leave it in a partially charged state (20-50% charge).
Not fully charged. -
The product is often supplied partially charged. Recharge it before use.
EC Declaration of Conformity (Machinery Directive)
The undersigned MT Distribution s.r.l. based in Via Bargellino 10 c/d,
Calderara di Reno (BO)
certifies
that the design and manufacture of this product
Product name: | Automobili Lamborghini |
---|---|
Item name: | AL1 |
Type of product: | Electric scooter |
Machinery Directive 2006/42/EC
Standard MD: EN ISO 12100:2010,
EN 60335-1:2012+AC:2014+A11:2014+A13:2017+A12019+A2:2019,
EN17128:2019, EN300328 v.2.2.2, EN301489-1 v.2.2.3, EN301489-17 v.3.2.2,
EN61000-6-1:20017, EN61000-6-3:2007+A1:2011, EN62479:2010, EN50581:2012 and
therefore complies with the essential requirements of the Machinery Directive.
MD 2006/42/EC,
LVD 2014/35/EU,
EMC 2014/30/EU,
RED 2014/43/EU.
Serial number: LMNmmaa000000 to LMNmmaa999999
First and last name: Emanuele Summa
Position: Director
Company: M.T. Distribution S.r.l.
Address: Via Bargellino 10, 40012 Calderara di Reno (BO), Italy
Date: 01/06/2020
ITALIANO
Manuale d’uso
Per informazioni, supporto tecnico ed assistenza rivolgersi al proprio
rivenditore
o visita il sito www.alemobility.com
Per i ricambi vai al sito
www.urbanemobility.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>