soundcore X500 Portable Bluetooth Speaker Motion User Guide
- June 17, 2024
- Soundcore
Table of Contents
soundcore X500 Portable Bluetooth Speaker Motion
soundcore Motion X500
Quick Start Guide
For FAQs and more information, please visit :
soundcore.com/support
- Press the Bluetooth button to enter Bluetooth pairing mode, then select “soundcore Motion X500” from the Bluetooth list to connect.
- With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.
- Spatial Signature
- White – Spatial Signature
- Spatial Dynamic
- Cold White – Spatial Dynamic
- Bass Boost
- Warm White – Bass Boost
- Warm White – Bass Boost
Button Controls
In the soundcore app, tap the Settings icon > “Sound Mode” > “Preferred audio
quality”.
18-month limited warranty
- www.ankerjapan.com
- [email protected]
- [email protected] (For Middle East and Africa Only) [email protected]
- + 1 (800) 988 7973 (US/Canada)
- + 44 (0) 1604 936200 (UK)
- + 49 (0) 69 9579 7960 (DE) 03 4455 7823
- + 971 529750842 (Middle East & Africa)
- + 971 8000320817 (UAE)
- + 966 8008500030 (KSA)
- + 965 22069086 (Kuwait)
- + 20 8000000826 (Egypt)
- Input
- Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Technology (UK) Limited
- GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Anker Innovations Deutschland GmbH
- Georg-Muche-Strasse 3, 80807 Munich, Germany
- The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited. is under license. Other trademarks and trade names are those of their respective owners.
- LDAC and LDAC logo are trademarks of Sony Corporation.
Important Safety Information
- Do not place naked flame sources, such as lighted candles, on or near the product.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Only use attachments/accessories specified by the manufacturer.
- Operating temperature should be between 0°C to 40°C/32°F to 104°F.
- Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
- Servicing is required when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- The product contains a battery pack, so it should not be exposed to excessive heat such as sunshine, fire or the like.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- Notice
- This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
- Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU and amendment (EU) 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://www.soundcore.com.
- Maximum output power: 11.83 dBm
- Frequency band: 2.4G band (2.402GHz-2.480GHz)
- This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
- FCC RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a
- minimum distance of 4 cm between the radiator & body.
- Company Name: Fantasia Trading LLC
- Address : 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
- Telephone : +1 (800) 988 7973
IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radio Frequency Exposure Statement:
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum
distance 4 cm between the radiator & body.
Declaration of the Presence Condition of the Restricted Substances
Marking
- Note 1：“ Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
- Note 2：“ ○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
- Note 3： The “－” indicates that the restricted substance corresponds to the exemption.