Honeywell HINTS Unified Data Collector User Guide

Honeywell HINTS Unified Data Collector

What’s inside?

• Training Needs Assessment
• New Cybersecurity Training Offering

Training Needs Assessment (TNA)

• Training Needs Assessment is the first step to developing a competent workforce using intelligent industrial operations and allows our customers to evaluate the knowledge of assessment takers against key areas of EPKS, SM, SM-SC, UOC, and FDM designed for Industry-wide Technician persona.
• Training Needs Assessment expands Training Needs Assessment (TNA) coverage by adding knowledge of assessment takers against key areas of Honeywell Systems, TPS, Networking, Virtualization, PHD, APC, CPM, QCS, Dynamo and OTS designed for
• Industry-wide Technician, Operator, Engineer, and Administrator persona.
• Training Needs Assessment is designed to identify appropriate learning interventions and to address and close any identified gaps in product and role-based knowledge and skills.

Deliverables:

• Comprehensive TNA report
• Individual TNA report (participant-wise)
• Organizational Report (organization wise)
• Competency Development Plan

For any inquiries, please reach out to:

• BTI Leader: Manas Dutta
• Honeywell Global Academy Director: Abhijit Gawade
• Honeywell Academy: APAC – Mini Goyal, EMEA – Shrikant Kamble, AMER – Nerio Gutierrez
• Offering Manager: Swati Agarwal
• New Cybersecurity Training Offering: Asynchronous Training (AT)

1. CS-0004-AT: Cybersecurity: Fundamentals – Industrial Control Systems (ICS) Cybersecurity Awareness
   • Introduction to cybersecurity challenges facing process plants and critical infrastructure.
   • Introduces the importance of securing control systems from cyber-attacks and concepts for implementing mitigation strategies.

• Please click here for course info, schedules, and requests to enroll.

For More Information

• To learn more about Honeywell’s e-learning Subscription Service, please contact your Honeywell Account Manager, Distributor, or System Integrator.

Honeywell Academy contacts for all other training solutions:

• For Americas-Canada-Latin America: HPSTrainingUSCANLAR@Honeywell.com
• For Europe-Middle East-Africa: HPS-Training-EMEA@honeywell.com
• For Asia Pacific: HPS-Training-APAC@honeywell.com
• Honeywell Academy website: https://process.honeywell.com/us/en/services/training

2024 Global Honeywell Users Group (HUG) Conference

• The 47th annual HUG will be held in Madrid, Spain on June 10-13, 2024
• For the 2024 Global HUG Steering Committee, EMEA representatives will have their first face-to-face meeting to start preparing agenda items in October this year.
• We will be looking to start the call for customer presentation papers in January 2024, and the accompanying abstracts for these will need to be submitted before April 1. The Steering Committee will review all submitted abstracts to see if they will be of interest to the HUG audience. Then the committee will follow up on acceptance and invite the end user customer presenters.
• If you submit an industry paper based on your HPS, UOP, SME, HCE, HCI, Cyber or other related Honeywell solutions or services, including lessons learned, and your paper is accepted, your 2024 HUG Conference registration fee will be waived.
• The 2024 HUG Conference registration fees, and what these include, will be listed on our website at the beginning of December.
• WANTED: NEW HUG CUSTOMER STEERING COMMITTEE MEMBERS

We may be looking for you! In the most ideal situation:

• You have attended at least one or multiple HUGs, and
• You have previously presented, and
• You are not afraid to represent your company and your industry, and
• On top of all this, you will have the full support of your company and leadership team to join us at our annual face-to-face conference.
• Typically, the HUG Steering Committee has a monthly one-hour call, we meet in the fall in person for one full day, and you need to be present the entire HUG week.
• We need you and your company to consider stepping in for a minimum of three years. You cannot already be on a committee or on a board with one of our conference competitors.
• Your company needs to bear your travel, accommodation, and other costs accrued. We do waive your conference registration fees at any HPS-HUG Conference you plan to attend.

How to indicate you are available:

• If the above has your interest, please drop us an email at: usersgroup@honeywell.com with the subject line: STEERING COMMITTEE MEMBER interest.
• Please also include your bio description, your picture, and a short statement on why you believe you should be on the HUG Conference Steering Committee.
• We already have a full Oil and Gas house, but we are looking for new members in the following industry categories:
• Utilities
• Terminal
• Upstream
• Minerals, Mining and Metals
• Life sciences
• Based on your submission, the Steering Committee members review your application, and the Chair and Vice Chair will interview you.
• Then they will explain the next step and answer you any questions you may have.
• If you’d like more information, please contact: usersgroup@honeywell.com
• We look forward to hearing from you, and your peers and to seeing you at the 2024 HUG in Madrid this June. Feel free to stay posted here in HINTS and/or start following #HPSHUG24.

Sheet Manufacturing & Gigafactory

Experion MX Software Support Guidelines

• Experion MX (QCS) Lifecycle support document is refreshed with updated information on current software release numbers and dates.
• The document also guides old unsupported releases with respective phase-out dates.
• The current latest Experion MX software version is 720.1, launched in June 2023, with a planned update to 720.2 in November 2023.
• Notice to all R703.x users, which is approaching the Phase-Out milestone on March 31, 2024. We recommend all projects adopt R720.x for the longest lifecycle support.

Experion MX Release Support Status Timeline

• More information can be found in latest knowledge article published on HPS Support site and GTAC support document for QCS:
• https://process.honeywell.com/us/en/secure/services-and-support/support-center/technical-support/technical-solutions/article-detail.ka_000135113

QCS 4.0 R500.1 New Features

QCS 4.0 receives regular updates to improve its ability to monitor Quality Control System performance and system health. The August R500.1 update added the following:

1. It is now possible to add Optimization Potential to the Monthly Report Summary page. This summarizes opportunities to improve production profits by optimizing supervisory controls to reduce costs, or increase production, based on the last month’s operating data.
2. Grade change analysis has been improved by adding auto-detection of grade transitions on the Trends and Machine Direction control displays. Detected grade transitions are captured in a pull-down menu. When a transition is selected, trend plots will automatically display data from one hour before, and one hour after the transition.
3. Users can now select a dark mode for displays to suit their viewing preference.
4. Interframe alignment tracking is available for systems with multiple scanners. Alignment values are logged and can be visualized on Trends. This paves the way for automatic alerting of scanner misalignment.
5. Support for non-measurement virtual I/O (VIO) such as analog inputs or remote controller status. All VIO configured on the QCS are included automatically when the system is onboarded to QCS 4.0.
   • If enabled, they can be trended and analyzed using Fast Fourier Transforms (FFT).
6. Users can save their own sets of trends & profiles for each QCS being monitored. Selected periods, profiles, trends, filters, and sorting are persistent throughout the user’s session.
7. Eleven new demo videos have been added to the online Training Materials to help users become familiar with working in QCS 4.0 and learning its features.

Battery Show USA 2023

We had a very successful exhibition at the US Battery Show, held between September 12th to 14th in Michigan, with below key highlights. Great teamwork!

• Held over 3 days and attracted over 15,000+ attendees from EV OEMs, cell producers, machinery OEMs, and many other potential partners in this industry.
• Tremendous growth predicted in North America with infrastructure spending on raw materials processing and cell production
• One Honeywell participation from PMT-HPS, PMT-AM, HBT, and SPS businesses attracted over 400+ booth visitors. Great traffic at the booth; the Honeywell brand is a big draw!
• LIVE demo at our booth: LIB Optical Caliper System, Orion console was setup with QCS SE, QCS 4.0 and Battery Manufacturing excellence system and iVision web inspection system displays, ProFlow FT actuators
• One Honeywell exhibit included Li-Ion Tamer, advanced material- Hydranal FA-Reagents for LIB, Safety and Productivity Solutions(SPS)-Electric Vehicle industry PPE, SPS- Electric Vehicle demo pod

Orion Console setup with live demo:

Honeywell Booth exhibits overview:

ES-Assessment Announcement

• We are announcing the Integrated Automation Assessment (IAA) and System Performance Baseline (SPB) services are being withdrawn from sale, effectively immediately.
• Simultaneously, we are introducing a new assessment service for Experion® Process Knowledge System (PKS) and TotalPlantTM Solution (TPS).
• The new service, Enabled Services Assessment, is an upgraded service for surveying lifecycle, performance, and compliance to Honeywell’s best practice configuration recommendations.
• This new service will include additional checks and synch up with the latest GTAC-documented audit checks that are not available in IAA.
• This service is designed to bring you quicker, more cost-effective, and actionable insights for your automation assets.

The new features include:

• More detailed lifecycle information down to the Experion patch/hotfix level
• 250+ security checks, including patching, AV status, and compliance to Experion security configuration guidelines
• More detailed network analysis, including FTE checks
• Additional server/client and TPS integration audit checks
• Detailed inventory capture for clients/servers, controllers, I/O, switches, etc.
• List of product notifications applicable to your inventory

The Benefits of Honeywell’s Enabled Services Assessment:

1. Swift Results: Say goodbye to waiting weeks for critical insights. Enabled Services Assessments leverage advanced automation to provide you with comprehensive system health results almost immediately after data upload.
2. Cost Savings: The Enabled Services Assessment not only delivers results faster but also comes at a lower cost ($15,000 per MSID) compared to the current IAA solution (USD 17,365 per MSID).
3. Automation at Its Best : Our cutting-edge Unified Data Collector (UDC) ensures fully automated data collection, eliminating the need for manual intervention or onsite technicians.
4. Actionable Insights: An easy-to-read dashboard, powered by Enabled Services, provides you with an overall health scorecard and actionable recommendations vs. a 100+ page pdf document.
   • The dashboard will be provided for a specific time with the ability to export all key information for follow-up actions.
5. Proactive Maintenance: Optimize expenditures and gain higher value from support services with the Enabled Services Assessment’s proactive maintenance approach.
   • Rather than spending time looking for problems with this automated assessment, you can spend time fixing problems.
   • To learn more about Enabled Services Assessment and how it can transform your automation operations, please contact your Honeywell Account Manager or Field Service leader.

Premium Platform Gen3 2-Node Direct Connect Release Announcement

• Honeywell continues to invest in expanding virtualization platform solutions to provide the latest updates in virtualization technology to systems of all sizes and configurations.
• The latest Premium Platform Gen3 2-Node Direct Connect solution is now qualified and available for ordering, and it provides technologies such as VMware vMotion, VMware High Availability, and simplified deployment and management tools in a configuration that has been optimized for smaller systems.
• This solution provides features such as automatic virtual machine recovery and non-disruptive maintenance in a cost-effective, two-server package with reduced networking and hardware requirements.
• The Premium Platform Gen3 2-Node Direct Connect solution is specifically engineered for use with Experion PKS and provides a turnkey solution for modern virtualization technologies.
• With detailed documentation available exclusively from Honeywell, automated deployment wizards, and curated system updates, this platform delivers advanced VMware vSphere and vSAN features and benefits for systems with smaller node counts.
• Detailed specifications, model numbers, and product information are available in the HPS Virtualization Specification.

TPS Builder End of Sale Announcement

• At Honeywell, we have always strived to provide you with the highest quality products and services.
• As part of the committed roadmap to modernize TPS Systems, we launched Experion Unified Engineering Tools (UET) with Experion R511.3 with functions and features to build points for TPS / EUCN nodes such as AM and EHPM and have continued it with updates for EHPMX and C300PM using Experion Control Builder in later releases.
• This development paved the path for more development in this direction to make UET a replacement for the aging TPS Builder Tool.
• After careful consideration and in alignment with our commitment to cyber security, innovation, and excellence, we have decided to transition the TPS Builder to End of Sale Status effective October 1st, 2023.
• The following product model numbers and their associated kits/licenses will be transitioned to the End of the Sale.

Note: xxx stands for the release number.

The latest releases TPS Builder R430 and R440 (released as limited distribution release) are part of this End of Sale announcement.

What Does This Mean for You?

1. End of Sale Date: October 1st, 2023, will mark the last day on which TPS Builder will be available for purchase. No new orders for this product will be accepted after this date.
2. End of Support: Following the End of Sale, our support for TPS Builder will continue as usual until December 31st, 2025. This data is in line with “End of Support” for coaxing UCN/LCN products. After this date, we will no longer provide software updates, security patches, or technical support for this product.
3. Upcoming Solutions: While we are announcing the End of the Sale to TPS Builder, we have launched an alternative solution – “Experion Unified Engineering Tools”, which offers functions and features for Point building for AM/HPM/EHPM/EHPMX/C300PM. We are actively working to introduce new and innovative refinements to these tools in upcoming Experion releases and will continue to add functionality that would enable our customers to transition to UET.

• We understand that transitions like these can raise questions, and we are here to help.
• For details on the latest product support policy, please reach out to GTAC (HPS Technical Support).
• Customers with active and paid service and support contracts are requested to contact their respective Account Managers or Honeywell’s Global Support team for additional information.

Legacy ICON, Z, EZ, and Classic Furniture Phase Out

• Legacy ICON, Z, EZ, and Classic furniture product lines support status will transition to phased out on the 1st of October 2023.
• No parts or support will be available after this date.
• Recycled parts may be available on a best-efforts basis.
• All new installation projects should use Honeywell’s state-of-the-art Orion Console.
• This information was originally communicated in October 2016 HINTS.
• For more details, please contact your account representative or system consultant.

Model Numbers Affected

ICON FURNITURE

Z/EZ FURNITURE

CLASSIC FURNITURE

Trackball
TP-CLLTOB| Classic 19” FPD/touchscreen & Operator (OEP) KBD
TP-CLUFPB| Classic Second 19” FPD
TP-CNDRW1| Z, EZ, and Classic Console DVD+RW Drive
TP-CCDE1A| Drive Enclosure – Work Surface Drive Bay Mounting
Model Number| Description
---|---
TP-CCDE2A| Drive Enclosure -U/Tier (Half-Ht) Drive Bay Mounting
MP-FLSW01| Classic Table Top Bay – Blue/White
MP-FLSW02| Classic Table Top Bay – Gray/Beige
MP-FLSW03| Classic Table Top Bay – Gray/Black
MP-FLSF01| Classic Table Top Bay W/ Cartridge Mount – Blue/White
MP-FLSF02| Classic Table Top Bay W/ Cartridge Mount – Gray/Beige
MP-FLSF03| Classic Table Top Bay W/ Cartridge Mount – Gray/Black
MP-FLSP01| Classic Lower Bay – Blue/White
MP-FLSP02| Classic Lower Bay – Gray/Beige
MP-FLSP03| Classic Lower Bay – Gray/Black
MP-FMSP01| Classic Lower Bay, Half Upper – Blue/White
MP-FMSP02| Classic Lower Bay, Half Upper – Gray/Beige
MP-FMSP03| Classic Lower Bay, Half Upper – Gray/Black
MP-FHSP01| Classic Lower Bay, Full Upper, CRT Pod, Blue/White
MP-FHSP02| Classic Lower Bay, Full Upper, CRT Pod, Gray/ Beige
MP-FHSP03| Classic Lower Bay, Full Upper, CRT Pod, Gray/Black
MP-FHSN01| Classic Lower Bay, Full Upper, FPD Plate, Blue/White
MP-FHSN02| Classic Lower Bay, Full Upper, FPD Plate, Gray/ Beige
MP-FHSN03| Classic Lower Bay, Full Upper, FPD Plate, Gray/Black
TP-PCMCF1| Experion Station Fixed Mounting Kit For Classic
TP-PCMCS1| Experion Station Sliding Mounting Kit For Classic
MP-EENT01| Power Entry, 115VAC, 15A, 6 – Twistlock Plugs
MP-MMEP03| Classic Half Upper Tier Blank Face

Unified Data Collector – new inventory asset collector for 2023

• The System Inventory Tool (SIT) data collector has been retired and replaced with the Unified Data Collector.
• The Unified Data Collector (UDC) is the new method for inventory data collection for TPS and Experion systems. The Unified Data Collector, as the name implies, is a newer approach to combining Honeywell’s various data collection utilities into a single application. The UDC will over time be the single data collector for Asset Data Collection for online contract renewals, Enabled Services, Integrated Automation Assessments, System Performance Benchmarking, Preventative Maintenance Data Collection, and
• GTAC diagnostic data capture.
• The Unified Data Collector is installed on an existing system at L3 or L2; it performs asset discovery and agents are deployed to collect the data from the various nodes.
• This server-based approach simplifies the inventory collection compared to the System Inventory Tool, which was required to be installed on each B Server.
• The Unified Data Collector is available here (after clicking the link, log in to download).

HPS Priority Notifications

• HPS Priority Notifications are available at https://process.honeywell.com/us/en/support/technical-publication?search= &filters=doc_type%2FNotification
• Please note that you have to sign in to access those documents.
• Be sure to check back regularly as new content is continually added in the form of notifications, Be Aware newsletters, Knowledge Base articles, and updates.

PN2023-18 C300 ON-PROCESS MIGRATION CONFIGURED WITH PCDI MAY FAIL| Experion PKS C300| R501.6, R511.4, R511.5, R520.2| August 31,

2023

PN2023-17 CONTROLLER CPU INCREASE OBSERVED AFTER MIGRATION TO R51X.X; R52.X.X AND HIGHER| C200E and C300 [PCNT001/PCNT02]| R51x.x; R52.x.x and higher| August 24,

2023

PN2023-16 PROFIBUS DATA READ BY THE CONTROLEDGE UOC FROM PROFIBUS SST CARD NOT IN LINE WITH THE DATA READ FROM PROFIBUS DEVICE| ControlEdge UOC| R511.x, R520.X| August 16,

2023

PN2023-14 USI MAY BE HALTED BY ERROR CODE 59| Safety Manager| R15x, R160.x, R161.x,

R162.1 up to and including R162.10, R200.x R201.x, R210.1

up to and including R210.6, R211.1, R211.2, R212.1

| August 2,

2023

PN2023-15 ELCN BRIDGE MAY EXPERIENCE DUAL PRIMARY| ELCN Bridge| R511.4 HF11, R511.4 HF12, R511.5 TCU4,

R520.1 TCU5 (not yet released), R520.2 TCU2, R520.2 TCU3

| August 2,

2023

Products Revisions and Support Status

Latest Media Revision| Latest Patch/Update| Support Status| Functional Release – First Shipment Announcement| Software Product Category
---|---|---|---|---
Application Whitelisting| R201.3| Supported| 2021-08| Standalone Software
Control Performance Analytics R110x| R110.1| Supported| 2018-12| Standalone Software
Control Performance Analytics R111x| R111.1| Current| 2020-04| Standalone Software
Control Performance Monitor R60x| R603.2| Current| 2021-08| Standalone Software
Control Performance Monitor R60x| R603.1| Supported| 2020-10| Standalone Software
Control Performance Monitor R60x| R602.5| Supported| 2020-02| Standalone Software
Control Performance Monitor R60x| R601.3| Supported| 2018-05| Standalone Software
ControlEdge 2020 R14x| R140.1| Supported| 2017-04| Standalone Software
ControlEdge 2020 R15x| R151.1| Supported| 2018-11| Standalone Software
ControlEdge 2020 R16x| R161.1| Supported| 2020-04| Standalone Software
ControlEdge 2020 R16x| R160.2| Supported| 2019-12| Standalone Software
ControlEdge 2020 R17x| R170.1| Supported| 2021-04| Standalone Software
ControlEdge 2020 R17x| R171.1| Supported| 2021-09| Standalone Software
ControlEdge 2020 R17x| R172.1| Supported| 2022-03| Standalone Software
ControlEdge 2020 R17x| R174.1| Current| 2023-01| Standalone Software
ControlEdge HC900 R60x| R600.1| Supported| 2014-04| Standalone Software
ControlEdge HC900 R62x| R620.1| Supported| 2016-09| Standalone Software
ControlEdge HC900 R63x| R630| Supported| 2017-04| Standalone Software
ControlEdge HC900 R65x| R650| Supported| 2018-06| Standalone Software
ControlEdge HC900 R66x| R660.2| Supported| 2018-12| Standalone Software
ControlEdge HC900 R70x| R700.1| Supported| 2020-07| Standalone Software
ControlEdge HC900 R71x| R710.1| Supported| 2021-04| Standalone Software
ControlEdge HC900 R72x| R720.1| Supported| 2021-06| Standalone Software
ControlEdge HC900 R73x| R730.1| Current| 2022-02| Standalone Software
ControlEdge PLC R15x| R152.1| Supported| 2019-04| Standalone Software
ControlEdge PLC R15x| R151.1| Supported| 2018-11| Standalone Software
ControlEdge PLC R16x| R161.1| Supported| 2020-04| Standalone Software
ControlEdge PLC R16x| R160.2| Supported| 2019-12| Standalone Software
ControlEdge PLC R17x| R170.1| Supported| 2021-04| Standalone Software
ControlEdge PLC R17x| R171.1| Supported| 2021-09| Standalone Software
ControlEdge PLC R17x| R172.1| Supported| 2022-03| Standalone Software
ControlEdge PLC R17x| R174.1| Current| 2023-01| Standalone Software
Cyber App Control| R400.1| Current| 2022-05| Standalone Software
Cyber Insights R100| R100.1| Current| 2023-07| Standalone Software
DynAMo Alerts & Notifications (A&N) R200| UA R321.2| Supported| 2013-10| Standalone Software
DynAMo Documentation & Enforcement (D&E) R200| ACM R321.12| Supported| 2016-05| Standalone Software
Dynamo Metrics & Reporting (M&R) R200| R202.1| Supported| 2017-03| Standalone Software
Dynamo Metrics & Reporting (M&R)

R210.1

| R210.1| Supported| 2020-05| Standalone Software
DynAMo Operations Logbook (DOL) R24x| R240.1| Supported| 2020-04| Standalone Software
---|---|---|---|---
DynAMo Operations Logbook (DOL) R24x| R246.1| Current| 2023-01| Standalone Software
DynAMo Operations Monitoring (DOM)

R24x

| R240.1| Supported| 2020-04| Standalone Software
DynAMo Operations Monitoring (DOM)

R24x

| R246.1| Current| 2023-01| Standalone Software
Enabled Services (Unified Data Collector

R120)

| R120.1| Supported| 2021-02| SaaS Offering
Enabled Services (Unified Data Collector

R121)

| R121.1| Supported| 2021-10| SaaS Offering
Enabled Services (Unified Data Collector

R130)

| R130.1| Current| 2022-09| SaaS Offering
Experion Backup and Restore R52x| R520.1| Current| 2021-12| Software Package
Experion HS R510| R510.2| Supported| 2018-09| System Software
Experion HS R511| R511.3| Supported| 2019-07| System Software
Experion HS R520| R520.1| Current| 2022-04| System Software
Experion LX R51x| R510.2| Supported| 2018-11| System Software
Experion LX R51x| R511.4| Supported| 2019-09| System Software
Experion LX R520| R520.1| Current| 2022-03| System Software
Experion MX CD Controls R70x| R701.2| Supported| 2018-05| Software Package
Experion MX CD Controls R70x| R700.1| Supported| 2017-03| Software Package
Experion MX CD Controls R70x| R703.1| Supported| 2019-06| Software Package
Experion MX CD Controls R70x| R702.1| Supported| 2019-06| Software Package
Experion MX CDMV Controls R70x| R701.1| Supported| 2018-05| Software Package
Experion MX CDMV Controls R70x| R700.1| Supported| 2017-03| Software Package
Experion MX CDMV Controls R70x| R702.1| Supported| 2019-06| Software Package
Experion MX CDMV Controls R70x| R703.2| Supported| 2019-06| Software Package
Experion MX CDMV Controls R70x| R704.1| Current| 2022-08| Software Package
Experion MX CDMV Controls R720| R720.1| Current| 2023-08| Software Package
Experion MX MD Controls R70x| R702.1| Supported| 2019-06| Software Package
Experion MX MD Controls R70x| R701.1| Supported| 2018-05| Software Package
Experion MX MD Controls R70x| R700.1| Supported| 2017-03| Software Package
Experion MX MDMV Controls R70x| R701.3| Supported| 2018-05| Software Package
Experion MX MDMV Controls R70x| R700.1| Supported| 2017-03| Software Package
Experion MX MDMV Controls R70x| R702.1| Supported| 2019-06| Software Package
Experion MX MDMV Controls R70x| R703.2| Supported| 2019-06| Software Package
Experion MX MDMV Controls R70x| R704.1| Current| 2022-08| Software Package
Experion MX MDMV Controls R720| R720.1| Current| 2023-08| Software Package
Experion MX/MXProLine R70x| R701.4| Supported| 2018-05| System Software
Experion MX/MXProLine R70x| R700.5| Supported| 2017-03| System Software
Experion MX/MXProLine R70x| R702.4| Supported| 2019-06| System Software
Experion MX/MXProLine R70x| R703.3| Supported| 2020-12| System Software
Experion MX/MXProLine R70x| R704.2| Current| 2022-08| System Software
Experion MX/MXProLine R720| R720.1| Current| 2023-08| System Software
Experion PKS R51x| R510.2| Supported| 2018-08| System Software
Experion PKS R51x| R511.5| Supported| 2018-08| System Software
Experion PKS R52x| R520.1| Supported| 2021-08| System Software
Experion PKS R52x| R520.2| Current| 2021-08| System Software
Fail Safe Controller R71x| R710.9| Supported| 2011-07| System Software
---|---|---|---|---
Fail Safe Controller R80x| R801.5| Current| 2014-10| System Software
Field Device Manager R50x| R500.1| Supported| 2017-03| Standalone Software
Field Device Manager R50x| R501.4| Supported| 2017-03| Standalone Software
Field Device Manager R51x| R511.5| Supported| 2019-09| Standalone Software
Field Device Manager R52x| R520.1| Supported| 2022-11| Standalone Software
Field Device Manager R52x| R520.2| Supported| 2023-01| Standalone Software
Field Device Manager R52x| R520.1 U1| Supported| 2022-11| Standalone Software
Field Device Manager R52x| R520.2 U1| Current| 2023-01| Standalone Software
Field Device Manager R52x| R521.1| Current| 2023-08| Standalone Software
Forge Blending and Movement R520.y| R520.2| Supported| 2021-07| Software Package
Forge Cybersecurity Suite-Enterprise Core

and Premium

| R204.1| Current| 2021-06| Standalone Software
Forge Cybersecurity Suite-Enterprise Core

and Premium

| R203.1| Supported| 2021-02| Standalone Software
Forge Cybersecurity Suite-Enterprise Core

and Premium

| R201.1| Supported| 2020-06| Standalone Software
Forge Cybersecurity Suite- Site| R204.1| Current| 2021-06| Standalone Software
Forge Cybersecurity Suite- Site| R203.1| Supported| 2021-02| Standalone Software
Forge Cybersecurity Suite- Site| R201.1| Supported| 2020-06| Standalone Software
HFAM | Alarm Performance Optimizer

R1.1.0

| R1.x.y| Current| 2021-10| Standalone Software
HFAM | Reporting R2.2.x

(Formerly DynAMo Metrics and Reporting)

| R2.2.x| Current| 2022-07| Standalone Software
Honeywell Forge Inspection Rounds| R8| Current| 2021-11| Standalone Software
Honeywell Forge Inspection Rounds| R7| Supported| 2020-07| Standalone Software
Honeywell Forge Workforce Competency| R520.1| Supported| 2021-09| Standalone Software
Honeywell Forge Workforce Competency| R521.1| Current| 2022-10| Standalone Software
Honeywell Trace R140| R140.1| Supported| 2020-06| Standalone Software
Honeywell Trace R150| 150.3| Current| 2021-07| Standalone Software
Immersive Competency| R100.1| Current| 2018-07| Standalone Software
Integrated Automation Assessment R15x| R150.1| Supported| 2018-02| Standalone Software
Integrated Automation Assessment R16x| R160.1| Supported| 2019-12| Standalone Software
Integrated Automation Assessment R17x| R170.3| Current| 2020-09| Standalone Software
Operations Safety Advisor R100.x| R100.0| Current| 2020-08| SaaS Offering
OptiVision R541x| R541.2| Supported| 2012-01| Software Package
OptiVision R6.1.0x| R6.1.0.1| Current| 2019-10| Software Package
OptiVision R600x| R600.2| Supported| 2014-08| Software Package
PlantCruise R51x| R510.2| Supported| 2018-11| System Software
PlantCruise R51x| R511.4| Supported| 2019-09| System Software
PlantCruise R520| R520.1| Current| 2022-03| System Software
PMD R91x| R910.3| Supported| 2020-05| System Software
PMD R92x| R920.1| Supported| 2021-09| System Software
PMD R92x| R920.2| Current| 2023-07| System Software
Predict- Amine| R4.0| Supported| 2017-09| Standalone Software
Predict- Crude| R2.0| Supported| 2015-09| Standalone Software
Predict- O &G| R7.1| Supported| 2018-09| Standalone Software
Predict- Pipe| R5.0| Supported| 2018-12| Standalone Software
Predict- RT| R140| Supported| 2019-06| Standalone Software
---|---|---|---|---
Predict- SA| R2.0| Supported| 2014-12| Standalone Software
Predict-SW (Sour Water)| R4.0| Supported| 2018-12| Standalone Software
Procedure Analyst R41x| R410.0| Supported| 2013-01| Standalone Software
Procedure Analyst R43x| R430.1| Supported| 2015-06| Standalone Software
Procedure Analyst R50x| R500.2| Supported| 2017-03| Standalone Software
Procedure Analyst R51x| R511.1 Patch 1| Current| 2020-09| Stadalone Software on Experion PKS

Media

Process Safety Analyzer R200| R201.3| Supported| 2020-01| Standalone Software
Process Safety Analyzer R210| 2.1.x| Current| 2022-09| Standalone Software
Process Safety Workbench v5.0.2.x| v5.0.2.1| Current| 2023-02| SaaS Offering /

Standalone SW

Profit Blending and Movement R501.y| R501.3| Supported| 2018-05| Software Package
Profit Blending and Movement R510.y| R510.4| Supported| 2019-09| Software Package
Profit Suit R50x| R502.1| Supported| 2019-12| Standalone Software
Profit Suit R51x| R511.1| Current| 2021-08| Standalone Software
Profit Suit R51x| R510.1| Supported| 2020-07| Standalone Software
QCS SE| R110.2| Current| 2021-08| System Software
Quality OptiMiser R540x| R540.1| Supported| 2010-10| Standalone Software
Quality OptiMiser R550x| R550.2| Supported| 2014-12| Standalone Software
Quality OptiMiser R560x| R560.1| Current| 2017-11| Standalone Software
Risk Manager R170| R170.1 Patch 3| Supported| 2018-03| Standalone Software
RTU2020 R11x| R110.1| Supported| 2015-06| Standalone Software
RTU2020 R12x| R120.1| Supported| 2016-05| Standalone Software
Safety Historian R20x| R202.1| Current| 2014-03| System Software
Safety Management Systems R210| R210.6| Current| 2020-60| System Software
Safety Manager R14x| R146.2| Supported| 2010-05| System Software
Safety Manager R15x| R154.5| Supported| 2012-04| System Software
Safety Manager R16x| R162.10| Supported| 2014-10| System Software
Safety Manager SC R20x| R201.2| Supported| 2018-08| System Software
Safety Manager SC R211| R211.2| Supported| 2021-08| System Software
Safety Manager SC R212| R212.1| Current| 2023-01| System Software
Secure Media Exchange (SMX)| 202.12| Current| 2017-08| Standalone Software
Socrates| R10.0| Supported| 2019-03| Standalone Software
Symphonite Integration and Analytics

R200x

| R200.2| Supported| 2017-07| Standalone Software
Symphonite Integration and Analytics

R201x

| R201.2| Current| 2020-01| Standalone Software
Symphonite Production Accounting &

Reconciliation

| R210.1| Current| 2019-02| Standalone Software
Symphonite Production Accounting &

Reconciliation

| R201.2| Supported| 2015-08| Standalone Software
Symphonite Production Accounting &

Reconciliation

| R200.1| Supported| 2015-08| Standalone Software
Symphonite RPMS| R510.1.8| Supported| 2018-12| Standalone Software
System Inventory Tool R22x| R220.1| Supported| 2017-09| Standalone Software
System Inventory Tool R23x| R230.3| Supported| 2018-05| Standalone Software
System Inventory Tool R23x| R230.2| Supported| 2018-05| Standalone Software
System Inventory Tool R23x| R230.1| Supported| 2018-05| Standalone Software
---|---|---|---|---
System Inventory Tool R30x| R300.1| Current| 2019-09| Standalone Software
Taiji PID 310x| R310.1| Supported| 2016-01| Standalone Software
Taiji PID 320x| R320.1| Current| 2021-04| Standalone Software
TCMI R10x| R100.8| Current| 2017-11| System Software
TPN R687.x| R687.6| Supported| 2018-02| System Software
TPN R688.x| R688.7| Supported| 2019-01| System Software
TPN R690.x| R690.2| Supported| 2022-09| System Software
TPN R690.x| R690.3| Current| 2023-04| System Software
Uniformance Asset Sentinel R51x| R511| Supported| 2017-10| Standalone Software
Uniformance Asset Sentinel R52x| R520.7| Supported| 2019-07| Standalone Software
Uniformance Asset Sentinel R52x| R520.X| Supported| 2019-07| Standalone Software
Uniformance Asset Sentinel R53x| R531.4| Current| 2021-04| Standalone Software
Uniformance Asset Sentinel R53x| R531.1| Supported| 2020-08| Standalone Software
Uniformance Executive R31x| R311.1| Supported| 2018-03| Standalone Software
Uniformance Executive R32x| R320.1| Current| 2018-09| Standalone Software
Uniformance Insight R2.3.x| R2.3.0| Supported| 2020-09| Standalone Software
Uniformance Insight R21x| R210.1| Supported| 2019-09| Standalone Software
Uniformance Insight R22x| R220.1| Supported| 2020-09| Standalone Software
Uniformance KPI R12x| R121.1| Supported| 2017-05| Standalone Software
Uniformance KPI R13x| R131.1| Current| 2019-11| Standalone Software
Uniformance KPI R13x| R130.1| Supported| 2018-03| Standalone Software
Uniformance PHD R40x| R400.1| Supported| 2019-06| Standalone Software
Uniformance PHD R41x| R410.1| Current| 2021-03| Standalone Software
Uniformance Process Studio R32x| R323.1| Current| 2020-04| Standalone Software
UniSim Competency Suite| R471.1| Supported| 2020-10| Standalone Software
UniSim Competency Suite| R470.1| Supported| 2020-01| Standalone Software
UniSim Design| R492| Current| 2022-11| Standalone Software
UniSim Design| R491| Supported| 2022-05| Standalone Software
UniSim Design| R490| Supported| 2021-11| Standalone Software
UniSim Design| R481| Supported| 2021-06| Standalone Software
UniSim Design| R480.1| Supported| 2020-10| Standalone Software
UniSim Design| R471.1| Supported| 2020-01| Standalone Software
UniSim Design| R470.1| Supported| 2019-10| Standalone Software
UniSim Design| R461.1| Supported| 2019-06| Standalone Software
UniSim Design| R460.1| Supported| 2018-05| Standalone Software
Web Order Services 54x| R540.1| Supported| 2014-08| Standalone Software
Advanced Formula Manager| R206| Supported| | Standalone Software
Biz Calc Manager| R240| Supported| | Standalone Software

• Note: Software releases not listed in the table are in “Phased Out” lifecycle status. The HPS Product Support Guide for Control, Safety, and Monitoring Systems is available for download following the link below (Requires Login)
• https://process.honeywell.com/us/en/support/technical-publication.search.product%2520support%2520guide%2520for%2520control%2520safety%2520and%2520monitorin g%2520systems

Definitions:

• Software Package” means any HPS software product developed for the specific functional release of system software.
• Standalone Software” means any HPS software product developed for independent operation from a system software functional release.
• System Software” means machine-readable data and executable programs used to define the functionality of the HPS control system and standard hardware products, but does not include firmware, operating system, application software, or other software products.
• SaaS Offering” means any HPS software product in which applications are hosted through the cloud and made available to end users over the internet.

References

• Sign On
• Honeywell Academy
• Course List
• Technical Publications
• Technical Publications
• Technical Publications
• Technical Publications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>