LG 48CXAUB 48 inch CX 4K Smart LED TV Owner’s Manual

Adjusting the menu
When the TV is turned on, press the ****button one time. You can adjust the Menu items using the button.

Open Source Softwaren Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Licenses

(Magic Remote supported models only)

Important Information for Preventing Image Retention
OLED is a self-emissive technology, which brings many significant benefits to image quality and performance. As with any self-emitting display, it is possible for users of OLED TVs to experience temporary image retention under certain conditions, such as when displaying a static image on the screen for a long time. LG OLED TVs incorporate dedicated functions that protect the screen from possible image retention.
If a static image persists on screen, screen brightness is automatically reduced in specific areas of, or across the entire screen. Once the static image disappears, screen brightness will automatically return to its prior setting. This is not a product malfunction.

Examples of Images that may Cause Image Retention

• Still images or fixed images containing certain information that are displayed uninterrupted on the screen, such as channel numbers, station logos, program titles, news or movie subtitles, and headlines.
• Fixed menu or icons for video game consoles or broadcasting set-top boxes.
• Black bars shown on the left, right, top, or bottom of the screen, such as in images with a 4:3 or 21:9 ratio.

Recommended Measures for Preventing Image Retention

• Avoid watching a video displaying an image as listed above for extended periods of time.

• Adjust your TV settings as below when turning on a video exhibiting an image as listed above for extended periods of time.
  – → → [Picture] → [Picture Mode Settings] → [Picture Mode] → [APS] – → → [Picture] → [Picture Mode Settings] → [OLED LIGHT] → Adjust to lower value
  – → → [Picture] → [OLED Screen Saver] → [Logo Luminance Adjustment] → [High]

• Turn off the menu bar of an external device, such as a set-top box, to prevent long-term display of the menu bar of such device.
  (Please refer to the manual of the applicable external device for instructions.)

• Adjust the settings as below when watching a video constantly showing black bars on the left, right, top or bottom, in order to remove the black bars.
  – → → [Picture] → [Aspect Ratio Settings] → [Aspect Ratio] → [Vertical Zoom] or [4-Way Zoom]

Information on Functions Supporting Image Quality in Relation to Temporary Image Retention

• LG OLED TVs provide a feature called Pixel Refresher, which helps to prevent temporary image retention.

• When the accumulated television viewing time reaches 2,000 hours or more (this is equivalent to watching TV for five hours a day over the course of a year), Pixel Refresher will be automatically activated once your TV is turned off. When turning off your TV, a notice will appear on the screen informing the activation of Pixel Refresher. This feature will run for an hour while your TV is turned off. A horizontal line may appear at the top or bottom of the screen when the process is almost finished.

• You may also manually activate Pixel Refresher via the TV menu:
  → → [Picture] → [OLED Screen Saver] → [Pixel Refresher].

• Whenever you watch your TV for more than four cumulative hours, Pixel Refresher will be automatically activated for a few minutes once your TV is turned off. (Note: Pixel Refresher will not be activated if the power cord of your TV is not plugged in or the main power is off.)

Regulatory
FCC NOTICE
(For USA)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the receiver.
– Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
– Consutt the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radio Frequency Interference Requirements (for UNII devices)
(For USA)
High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.

FCC RF Radiation Exposure Statement
(For USA)
(For having wireless function (WLAN, Bluetooth,…}}
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located oF operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.
Industry Canada Statement
(For Canada)
(For having wireless function (WLAN, Bluetooth,…})
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement
(For Canada)
(For having wireless function (WLAN, Bluetooth,…)}
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna & your body.
NOTE THE MANUFACTURER {S NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

RSS-247 Requirement
(For Canada)
(For product having the wireless function using 5 GHz frequency bands)

1. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.cp. limit;
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i..p. limits as appropriate; and
4. (For devices operating in the band 5250-5350 MHz having ane.i.rp. greater than 200 mW) Antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 of RSS-247 shall be clearly indicated.
   Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

NOTE TO CABLE/TV INSTALLER
{For USA and Canada)
This reminder is provided to call the CATY system installer’s attention to Artide 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

WARNING!
Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set.
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.
Symbols

| Refers to alternating current (AC).
---|---
| Refers to direct current (DC).
| Refers to class II equipment.
| Refers to stand-by.
| Refers to “ON” (power).
| Refers to dangerous voltage.

LG Take-back & Recycling Policy
(For USA)
LG Electronics offers a customized e-waste take-back & recycling service that meets local needs and requirements in the countries where e-waste regulations are in place, and also provides product take-back & recycling service voluntarily in some regions. LG Electronics evaluates products’ recyclability at the design step selectively, with the goal of improving recyclability where practicable. Through these activities, LG Electronics seeks to contribute to conserving natural resources and protecting the environment. For more information, please visit our global site at https://www.lg.com/recycling
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS

Consumer Technology Association
THE CONSUMER TECHNOLOGY INDUSTRY CARES
Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury. TUNE IN TO SAFETY

• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.
• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by a Nationally Recognized Testing Laboratory (NRTL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Use proper anchoring systems for different wall or ceiling types (e.g. wood, concrete, metal, etc.). If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

• REMEMBER Special care should be made in the placement of older CRT/flat-panel televisions.
  Many new television buyers move their older CRT/flat-panel televisions into a secondary room after the purchase of a flat-panel television.

• NEVER place your older CRT/flat-panel television on a dresser where children may be tempted to use the drawers to climb.

• ALWAYS place your older CRT/flat-panel television on furniture that is sturdy and appropriate for its size and weight.

• ALWAYS make sure your older CRT/flat-panel television does not hang over the edge of your furniture.

CTA.tech
Supplier`s Declaration of Conformity

The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service.
Model……………..
Serial No………………..
LG Customer Information Center
For inquires or comments, visit www.lg.com or call;
1-800-243-0000 USA, Consumer User
1-888-865-3026 USA, Commercial User
1-888-542-2623 CANADA
Register your product Online!
www.lg.com

OWNER’S MANUAL
EXTERNAL CONTROL
DEVICE SETUP

Please read this manual carefully before operating the set and retain it for future reference.

KEY CODES

• This feature is not available for all models.

Code (Hexa)| Function| Note| Code (Hexa)| Function| Note
---|---|---|---|---|---
00| CH +, PR +| R/C Button| 53| List| R/C Button
01| CH -, PR –| R/C Button| 5B| Exit| R/C Button
02| Volume +| R/C Button| 60| PIP(AD)| R/C Button
03| Volume –| R/C Button| 61| Blue| R/C Button
06| > (Arrow Key / Right Key)| R/C Button| 63| Yellow| R/C Button
07| < (Arrow Key / Left Key)| R/C Button| 71| Green| R/C Button
08| Power| R/C Button| 72| Red| R/C Button
09| Mute| R/C Button| 79| Ratio / Aspect Ratio| R/C Button
0B| Input| R/C Button| 91| AD (Audio Description)| R/C Button
0E| SLEEP| R/C Button| 9E| LIVE MENU| R/C Button
0F| TV, TV/RAD| R/C Button| 7A| User Guide| R/C Button
10 – 19| Number Key 0 – 9| R/C Button| 7C| Smart / Home| R/C Button
1A| Q.View / Flashback| R/C Button| 7E| SIMPLINK| R/C Button
1E| FAV (Favorite Channel)| R/C Button| 8E| ►► (Forward)| R/C Button
20| Text (Teletext)| R/C Button| 8F| ◄◄ (Rewind)| R/C Button
21| T. Opt (Teletext Option)| R/C Button| AA| Info| R/C Button
28| Return (BACK)| R/C Button| AB| Program Guide| R/C Button
30| AV (Audio / Video) Mode| R/C Button| B0| ►  (Play)| R/C Button
39| Caption/Subtitle| R/C Button| B1| □ (Stop / File List)| R/C Button
40| Λ (Arrow Key / Cursor Up)| R/C Button| B5| RECENT| R/C Button
41| V (Arrow Key / Cursor Down)| R/C Button| BA| ꕘ (Freeze / Slow Play / Pause)| R/C Button
42| My Apps| R/C Button| BB| Soccer| R/C Button
43| Menu / Settings| R/C Button| BD| ●    (REC)| R/C Button
44| OK / Enter| R/C Button| DC| 3D| R/C Button
45| Q.Menu| R/C Button| 99| AutoConfig| R/C Button
4C| List, –| R/C Button| 9F| App / | R/C Button
4D| PICTURE| R/C Button| 9B| TV / PC| R/C Button
52| SOUND| R/C Button|

• Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel.
  (For South Korea, Japan, North America, Latin America except Colombia models)

EXTERNAL CONTROL DEVICE SETUP

• Image shown may differ from your TV.

Connect the USB to Serial(RS-232C) converter/RS-232C(Serial) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.

• Please be advised that not all models support this type of connectivity.

• Cable is not provided.
  USB to Serial(RS-232C) converter with USB Cable
  USB Type

  • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial(RS-232C) converter which is not made nor provided by LG.

  • It can be purchased from computer stores that carry accessories for IT support professionals.
    RS-232C(Serial) With RS-232C(Serial) Cable
    DE9 (D-Sub 9pin) Type

  • You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C(Serial) cable required for the connection between the PC and the TV, which is specified in the manual.
    

The connection interface may differ from your TV.

Phone jack Type

• You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual.
• For other models, connect to the USB port.
• The connection interface may differ from your TV.

Customer Computer RS-232C configurations
3-Wire Configurations(Not standard) Set ID
For Set ID number, see “Real Data Mapping” on p.6

1. Press SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to (*General → About this TV or OPTION) and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.

• (Depending on model)

Communication Parameters

•  Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.

Command reference list
(Depending on model)

| COMMAND1| COMMAND2| DATA (Hexadecimal)| | COMMAND1| COMMAND2| DATA (Hexadecimal)
---|---|---|---|---|---|---|---
01. Power*| k| a| 00 to 01| 15. Balance| k| t| 00 to 64
02. Aspect Ratio| k| c| (p.7)| 16. Color (Colour) Temperature| x| u| 00 to 64
03. Screen Mute| k| d| (p.7)| 17. ISM Method (Only Plasma TV)| j| p| (p.8)
04. Volume Mute| k| e| 00 to 01| 18. Equalizer| j| v| (p.9)
05. Volume Control| k| f| 00 to 64| 19. Energy Saving| j| q| 00 to 05
06. Contrast| k| g| 00 to 64| 20. Tune Command| m| a| (p.9)
07. Brightness| k| h| 00 to 64| 21. Channel (Programme) Add/Del(Skip)| m| b| 00 to 01
08. Color/ Colour| k| i| 00 to 64| 22. Key| m| c| Key Codes
09. Tint| k| j| 00 to 64| 23. Control Backlight, Control Panel Light| m| g| 00 to 64
10. Sharpness| k| k| 00 to 32| 24. Input select (Main)| x| b| (p.11)
11. OSD Select| k| l| 00 to 01| 25. 3D (Only 3D models)| x| t| (p.11)
12. Remote Control Lock Mode| k| m| 00 to 01| 26. Extended 3D (Only 3D models)| x| v| (p.12)
13. Treble| k| r| 00 to 64| 27. Auto Configure| j| u| (p.12)
14. Bass| k| s| 00 to 64| | | |

• Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed and treated as NG.
  With RS232C cable, TV can communicate “ka command” in power-on or power-off status. but with USB-to-Serial converter cable, the command works only if TV is on.

Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x)
[Command 2] : Second command to control the TV.
[Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu.
Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.

• [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on transmission/receiving protocol.
  [DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
  [Cr] : Carriage Return – ASCII code ‘0x0D’
  [ ] : Space – ASCII code ‘0x20’

OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x] The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x] The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non- viable functions or communication errors.
Data 00: Illegal Code

Real data mapping (Hexadecimal b Decimal)

• When you enter the [data] in hexadecimal, refer to following conversion table.

• Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.”
  00 : Step 0 32 : Step 50 (Set ID 50) FE : Step 254
  01 : Step 1 (Set ID 1) 33 : Step 51 (Set ID 51) FF : Step 255
  … … …
  0A : Step 10 (Set ID 10) 63 : Step 99 (Set ID 99) 01 00 : Step 256
  … … …
  0F : Step 15 (Set ID 15) C7 : Step 199 27 0E : Step 9998
  10 : Step 16 (Set ID 16) C8 : Step 200 27 0F : Step 9999
  … … …

• Commands may work differently depending on model and signal.

  1. Power (Command: k a)
     ► To control Power On or Off of the set.
     Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On
     Ack [a][ ][Set ID][ ][OK/NG][Data][x] ► To Show TV is Power On or Off
     Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function.

  2. Aspect Ratio (Command: k c)
     (Main Picture Size)
     ► To adjust the screen format. (Main picture format)
     You can also adjust the screen format using the
     Aspect Ratio in the Q.MENU. or PICTURE menu.
     Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01 : Normal screen
     (4:3)
     02 : Wide screen
     (16:9)
     04 : Zoom
     05 : Zoom 2
     (Latin America except Colombia Only)
     06 : Set by Program/ Original
     07 : 14:9
     (Europe, Colombia, Mid-East, Asia except South Korea and Japan)
     09 : Just Scan
     0B : Full Wide
     (Europe, Colombia, MidEast, Asia except South Korea and Japan)
     10 to 1F : Cinema Zoom 1 to 16 0c : 21:9 (Depending on model)
     Ack [c][ ][Set ID][ ][OK/NG][Data][x] Using the PC input, you select either 16:9 or 4:3
     screen aspect ratio.

• In DTV/HDMI/Component mode (high-definition), Just Scan is available.

• Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially. 3. Screen Mute (Command: k d)
  ► To select screen mute on/off.
  Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on)
  Video mute off
  01 : Screen mute on (Picture off)
  10 : Video mute on
  Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.

  4. Volume Mute (Command: k e)
     ► To control volume mute on/off.
     You can also adjust mute using the MUTE button on remote control.
     Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off)
     01 : Volume mute off (Volume on)
     Ack [e][ ][Set ID][ ][OK/NG][Data][x]

  5. Volume Control (Command: k f)
     ► To adjust volume.
     You can also adjust volume with the volume buttons on remote control.
     Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
     Ack [f][ ][Set ID][ ][OK/NG][Data][x]

  6. Contrast (Command: k g)
     ► To adjust screen contrast.
     You can also adjust contrast in the PICTURE menu.
     Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
     Ack [g][ ][Set ID][ ][OK/NG][Data][x]

  7. Brightness (Command: k h)
     ► To adjust screen brightness.
     You can also adjust brightness in the PICTURE menu.
     Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
     Ack [h][ ][Set ID][ ][OK/NG][Data][x]

  8. Color/Colour (Command: k i)
     ► To adjust the screen Color(Colour).
     You can also adjust colour in the PICTURE menu.
     Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
     Ack [i][ ][Set ID][ ][OK/NG][Data][x]

  9. Tint (Command: k j)
     ► To adjust the screen tint.
     You can also adjust tint in the PICTURE menu.
     Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64
     Ack [j][ ][Set ID][ ][OK/NG][Data][x]

  10. Sharpness (Command: k k)
      ► To adjust the screen sharpness.
      You can also adjust sharpness in the PICTURE menu.
      Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 32
      Ack [k][ ][Set ID][ ][OK/NG][Data][x]

  11. OSD Select (Command: k l)
      ► To select OSD (On Screen Display) on/off when controlling remotely.
      Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off 01 : OSD on
      Ack [l][ ][Set ID][ ][OK/NG][Data][x]

  12. Remote control lock mode (Command: k m)

 ► To lock the front panel controls on the monitor and remote control.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00 : Lock off 01 : Lock on

Ack [m][ ][Set ID][ ][OK/NG][Data][x]

• If you are not using the remote control, use this mode.

When main power is off & on (plug-off and plug-in, after 20 – 30 seconds), external control lock is released.

• In the standby mode (DC off by off timer or ‘ka’,  ‘mc’ command), and if key lock is on, TV will not  turn on by power on key of IR & Local Key.

  13. Treble (Command: k r)
      ► To adjust treble.
      You can also adjust in the AUDIO menu.
      Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
      Ack [r][ ][Set ID][ ][OK/NG][Data][x] * (Depending on model)

  14. Bass (Command: k s)
      ► To adjust Bass.
      You can also adjust in the AUDIO menu.
      Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
      Ack [s][ ][Set ID][ ][OK/NG][Data][x] * (Depending on model)

  15. Balance (Command: k t)
      ► To adjust balance.
      You can also adjust balance in the AUDIO menu.
      Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
      Ack [t][ ][Set ID][ ][OK/NG][Data][x]

  16. Color(Colour) Temperature (Command: x u)
      ► To adjust colour temperature. You can also adjust Color(Colour) Temperature in the PICTURE menu.
      Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
      Ack [u][ ][Set ID][ ][OK/NG][Data][x]

  17. ISM Method (Command: j p) (Only Plasma TV)
      ► To control the ISM method. You can also adjust ISM Method in OPTION menu.
      Transmission [j][p][ ][Set ID][ ][Data][Cr] Data Min : 02: Orbiter
      08: Normal
      20: Color(Colour) Wash
      Ack [p][ ][Set ID][ ][OK/NG][Data][x]

  18. Equalizer (Command : j v)
      ► Adjust EQ of the set.
      Transmission [j][v][ ][Set ID][ ][Data][Cr]7| 6| 5| Frequency| 4| 3| 2| 1| 0| Step
      ---|---|---|---|---|---|---|---|---|---
      0| 0| 0| 1st Band| 0| 0| 0| 0| 0| 0(decimal)
      0| 0| 1| 2nd Band| 0| 0| 0| 0| 1| 1(decimal)
      0| 1| 0| 3rd Band| …| …| …| …| …| …
      0| 1| 1| 4th Band| 1| 0| 0| 1| 1| 19(decimal)
      1| 0| 0| 5th Band| 1| 0| 1| 0| 1| 20(decimal)

Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value.

19. Energy Saving (Command: j q)
    ► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
    Transmission [j][q][ ][Set ID][ ][Data][Cr] Data
    00 : Off
    01 : Minimum
    02 : Medium
    03 : Maximum
    04 : Auto (For LCD TV / LED TV) /
    Intelligent sensor (For PDP TV)
    05 : Screen off

• (Depending on model)
  Ack [q][ ][Set ID][ ][OK/NG][Data][x]

  20. Tune Command (Command: m a)

• This command may work differently depending on model and signal.
  • For Europe, Mid-East, Colombia, Asia except South Korea and Japan Model
  ► Select channel to following physical number.
  Transmission [m][a][ ][Set ID][ ][Data 00][ ] [Data 01][ ][Data 02][Cr] * Analog Antenna/Cable
  [Data 00][Data 01] Channel Data
  Data 00 : High byte channel data
  Data 01 : Low byte channel data
  – 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
  Data 02 : Input Source (Analog)
  – 00 : Antenna TV (ATV)
  – 80 : Cable TV (CATV)

• Digital Antenna/Cable/Satellite
  [Data 00][Data 01]: Channel Data
  Data 00 : High Channel data
  Data 01 : Low Channel data
  – 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
  Data 02 : Input Source (Digital)
  – 10 : Antenna TV (DTV)
  – 20 : Antenna Radio (Radio)
  – 40 : Satellite TV (SDTV)
  – 50 : Satellite Radio (S-Radio)
  – 90 : Cable TV (CADTV)
  – a0 : Cable Radio (CA-Radio)

• Tune Command Examples:
  1. Tune to the Analog antenna (PAL) Channel 10.
  Set ID = All = 00
  Data 00 & 01 = Channel Data is 10 = 00 0a
  Data 02 = Analog Antenna TV = 00
  Result = ma 00 00 0a 00
  2. Tune to the digital antenna (DVB-T) Channel 01.
  Set ID = All = 00
  Data 00 & 01 = Channel Data is 1 = 00 01
  Data 02 = Digital Antenna TV = 10
  Result = ma 00 00 01 10
  3. Tune to the satellite (DVB-S) Channel 1000.
  Set ID = All = 00
  Data 00 & 01 = Channel Data is 1000 = 03 E8
  Data 02 = Digital Satellite TV = 40
  Result = ma 00 03 E8 40
  Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x] • For South Korea, North/Latin America except
  Colombia Model
  ► To tune channel to following physical/major/minor number.
  Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital.

• Analog Antenna/Cable
  Data 00 : Physical Channel Number
  – Antenna (ATV) : 02~45 (Decimal: 2 ~ 69)
  – Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
  [Data 01 ~ 04]: Major/Minor Channel Number
  Data 01 & 02: xx (Don’t care)
  Data 03 & 04: xx (Don’t care)
  Data 05: Input Source (Analog)
  – 00 : Antenna TV (ATV)
  – 01 : Cable TV (CATV)

• Digital Antenna/Cable
  Data 00 : xx (Don’t care)
  [Data 01][Data 02]: Major Channel Number
  Data 01 : High byte Channel Data
  Data 02 : Low byte Channel Data
  – 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
  [Data 03][Data 04]: Minor Channel Number
  Data 03 : High byte Channel Data
  Data 04 : Low byte Channel Data
  Data 05 : Input Source (Digital)
  – 02 : Antenna TV (DTV) – Use Physical Channel
  Number
  – 06 : Cable TV (CADTV) – Use Physical Channel
  Number
  – 22 : Antenna TV (DTV) – Don’t Use Physical
  Channel Number
  – 26 : Cable TV (CADTV) – Don’t Use Physical
  Channel Number
  – 46 : Cable TV (CADTV) – Use Physical/Major
  Channel Number Only (One Part Channel)
  – 66 : Cable TV (CADTV) – Use Major Channel
  Number Only (One Part Channel)
  – 0b : Cable DTV Plus – Use Physical Channel
  Number
  – 2b : Cable DTV Plus – Don’t Use Physical
  Channel Number
  – 4b : Cable DTV Plus – Use Physical/Major
  Channel Number Only (One Part Channel)
  – 6b : Cable DTV Plus – Use Major Channel
  Number Only (One Part Channel)
  Two bytes are available for each major and minor
  channel data, but usually the low byte is used alone
  (high byte is 0).

• Tune Command Examples:
  1. Tune to the Analog cable (NTSC) channel 35.
  Set ID = All = 00
  Data 00 = Channel Data is 35 = 23
  Data 01 & 02 = No Major = 00 00
  Data 03 & 04 = No Minor = 00 00
  Data 05 = Analog Cable TV = 01
  Total = ma 00 23 00 00 00 00 01
  2. Tune to the digital antenna (ATSC) channel 30-3.
  Set ID = All = 00
  Data 00 = Don’t know Physical = 00
  Data 01 & 02 = Major is 30 = 00 1E
  Data 03 & 04 = Minor is 3 = 00 03
  Data 05 = Digital Antenna TV = 22
  Total = ma 00 00 00 1E 00 03 22
  Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] • For Japan Model
  ► To tune channel to following physical/major/minor
  number.
  Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] * Digital Antenna/Satellite
  Data 00: xx (Don’t care)
  [Data 01][Data 02]: Major Channel Number
  Data 01: High byte Channel Data
  Data 02: Low byte Channel Data
  – 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
  [Data 03][Data 04]: Minor/Branch Channel Number
  (Don’t care in Satellite)
  Data 03: High byte Channel Data
  Data 04: Low byte Channel Data
  Data 05 : Input Source (Digital/Satellite for Japan)
  – 02 : Antenna TV (DTV)
  – 42 : Antenna TV (DTV) – Use Physical/Major
  Channel Number Only (One Part Channel)
  – 62 : Antenna TV (DTV) – Use Major Channel
  Number Only (One Part Channel)
  – 07 : BS (Broadcasting Satellite)
  – 08 : CS1 (Communication Satellite 1)
  – 09 : CS2 (Communication Satellite 2)

• Tune Command Examples:
  1 Tune to the digital antenna (ISDB-T) channel 17-1.
  Set ID = All = 00
  Data 00 = Don’t know Physical = 00
  Data 01 & 02 = Major is 17 = 00 11
  Data 03 & 04 = Minor/Branch is 1 = 00 01
  Data 05 = Digital Antenna TV = 02
  Total = ma 00 00 00 11 00 01 02
  2. Tune to the BS (ISDB-BS) channel 30.
  Set ID = All = 00
  Data 00 = Don’t know Physical = 00
  Data 01 & 02 = Major is 30 = 00 1E
  Data 03 & 04 = Don’t Care = 00 00
  Data 05 = Digital BS TV = 07
  Total = ma 00 00 00 1E 00 00 07

• This feature is varied based on the model.
  Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x]

  21. Channel(Programme) Add/Del(Skip) (Command: m b)
      ► To skip current channel(programme) for next time.
      Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add
      Ack [b][ ][Set ID][ ][OK/NG][Data][x] * Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add.

  22. Key (Command: m c)
      ► To send IR remote key code.
      Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code – p.2.
      Ack [c][ ][Set ID][ ][OK/NG][Data][x]

  23. Control Backlight (Command: m g)
      • For LCD TV / LED TV
      ► To control the backlight.
      Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
      Ack [g][ ][Set ID][ ][OK/NG][Data][x] Control Panel Light (Command: m g)
      • For Plasma TV
      ► To control the panel light.
      Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
      Ack [g][ ][Set ID][ ][OK/NG][Data][x]

  24. Input select (Command: x b)
      (Main Picture Input)
      ► To select input source for main picture.
      Transmission [x][b][ ][Set ID][ ][Data][Cr] Data
      00 : DTV
      02 : Satellite DTV
      ISDB-BS (Japan)
      03 : ISDB-CS1 (Japan)
      04 : ISDB-CS2 (Japan)
      11 : CATV
      01 : CADTV
      10 : ATV
      20 : AV or AV1 21 : AV2
      40 : Component1
      60 : RGB
      41 : Component2
      90 : HDMI1
      92 : HDMI3
      91 : HDMI2
      93 : HDMI4
      Ack [b][ ][Set ID][ ][OK/NG][Data][x] * This function depends on model and signal.

  25. 3D(Command: x t) (only 3D models)
      (Depending on model)
      ► To change 3D mode for TV.
      Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data 03][Cr] (Depending on model)
      Data Structure
      [Data 00] 00 : 3D On
      01 : 3D Off
      02 : 3D to 2D
      03 : 2D to 3D
      [Data 01] 00 : Top and Bottom
      01 : Side by Side
      02 : Check Board
      03 : Frame Sequential
      04 : Column interleaving
      05 : Row interleaving
      [Data 02] 00 : Right to Left
      01 : Left to Right
      [Data 03] 3D Effect(3D Depth): Min : 00 – Max : 14
      (transmit by Hexadecimal code)

• [Data 02], [Data 03] functions depend on model and signal.

• If [Data 00] is 00 (3D On), [Data 03] has no meaning.

• If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning.

• If [Data 00] is 03 (2D to 3D), [Data 01] and [Data 02] have no meaning.

• If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.

• All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal.[Data 00]	[Data 01]	[Data 02]	[Data 03]
  00	O	O	O
  01	X	X	X
  02	X	X	X
  03	X	O	O

X : don’t care
Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] [Data03][x] [t][ ][Set ID][ ][NG][Data00][x]

26. Extended 3D(Command: x v) (only 3D models)
    (Depending on model)
    ► To change 3D option for TV.
    Transmission [x][v][ ][Set ID][ ][Data 00][ ] [Data 01][Cr] [Data 00] 3D option
    00 : 3D Picture Correction
    01 : 3D Depth (3D Mode is Manual Only)
    02 : 3D Viewpoint
    06 : 3D Color Correction
    07 : 3D Sound Zooming
    08 : Normal Image View
    09 : 3D Mode (Genre)
    [Data 01] It has own range for each 3D option
    determined by [Data 00].

1. When [Data 00] is 00
   00 : Right to Left
   01 : Left to Right
2. When [Data 00] is 01, 02
   Data Min: 0 – Max: 14 (*transmit by Hexadecimal code)
   Data value range(0 – 20) converts Viewpoint range
   (-10 – +10) automatically (Depending on model)

• This option works when 3D Mode (Genre) is manual only.

3. When [Data 00] is 06, 07
   00 : Off
   01 : On
4. When [Data 00] is 08
   00 : Revert to 3D video from 3D-to-2D converted 2D video
   01 : Change 3D video to 2D video, except 2D-to-3D video

• If conversion condition doesn’t meet, command is treated as NG.

5. When [Data 00] is 09
   00 : Standard
   02 : Cinema
   04 : Manual
   01 : Sport
   03 : Extreme
   05 : Auto
   Ack [v][ ][Set ID][ ][OK][Data00][Data01][x] [v][ ][Set ID][ ][NG][Data00][x]

27. Auto Configure (Command: j u)
    (Depending on model)
    ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode.
    Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Auto Configure
    Ack [u][ ][Set ID][ ][OK/NG][Data][x]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>