MAGNASONIC CD2800 Jewelry Cleaners Compared Instructions
- June 17, 2024
- MAGNASONIC
Table of Contents
MAGNASONIC CD2800 Jewelry Cleaners Compared
Features
- 35watts of TRUE
- ULTRASONIC Power
- 42,000 cycle energy wave
- quiet, solid state circuitry
- 3 minutes auto shut off
SPECIFICATIONS:
- NAME Ultrasonic Cleaner POWER SUPPLY
- ITEM NO. CD2800
- POWER SUPPLY AC100-120V ~ 60Hz
- DIM 20X12.5X14cm
- TANK SIZE 600ml
- TIMER SETTING 3 minutes
- WT 780 g
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USING
DANGER-To reduce the risk of electrocution:
- Always unplug this product immediately after using.
- Do not use while bathing.
- Do not place or store product where it can fall or be pulled into a tub or sink.
- Do not place in or drop into water or other liquid.
- Do not reach for a product that has fallen into water. Unplug immediately.
- The product may be off or can’t be switched off when it is subjected to electromagnetic interference like Fast Transients or Surge voltage, but it can recover after being re-plugged in the socket, and then just follow the instruction described in this manual to set the function again for normal operation.
WARNING-To reduce the risk of burns, electrocution, fire, or injury to persons.
- A product should never be left unattended when plugged in.
- Close supervision is necessary when this product is used by, on, or near children or invalids.
- Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- never operate this product if it has a damaged cord or plug. If it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service centre for examination and repair.
- Keep the cord away from heated surfaces.
- Never use while sleeping or drowsy.
- Never drop or insert any object into any opening or hose.
- This appliance is not intended for used by persons (including) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.
APPLIED USES
-
Jewelery Decorations
- Necklaces,
- Fingers,
- Earrings,
- Bracelets,
- etc.
-
Opticals
- Glasses,
- Sun-glasses,
- Watch chains,
- Waterproof watches,
- etc.
-
Commodities
- Electric shaver heads,
- Razor blades,
- Dentures,
- Combs,
- Toothbrushes,etc.
-
Stationery
- Pen-heads,
- Printer-heads,
- Signature chops,
- etc.
-
Metal Articles
- Watch Parts,
- Ancient coins,
- Badges,
- Valves,
- Machine nozzles,etc.
-
Dining Appliances
- Slots and lines of dishware
- handles,etc.
CAUTION
- Do not clean the unit with organical solvents, diluents, abrasives.
- Do not add too much water. Never let water overflow.
- Before cleaning, filling with water is a must, otherwise the unit may be damaged.
- Do not dissect the unit except the authorized serviceman.
- Prohibit washing the complete unit with water, to reduce the risk of electrocution
- Repeat working cycle can enhance the cleaning effect. While the interval is better longer than 5 minutes.
- Unfirmly inlaid studs on decorations may shed off during cleaning.
- Unfastened parts may also meet above problem.
- Do not merge non-waterproof watch into water.
Product Drawing & Indication
OPERATION GUIDANCE
-
Open the upper cover, put the article into the tank, then fill with water. (The water should merge the article but not exceed the ruling mark.)
Running without water can damage the unit! -
Close the cover. Connect the unit with power. The Power Indication Light (Blue) on the inner cover will be on.
-
Press ON to start cleaning and the Working Indication Light (Red) on the upper cover will be on.
During cleaning, the “ZiZi” noise is normal, which comes from tank working.
- After 3 minutes, the cleaning automatically stops and the Red light turns off. Or press OFF to stop. For another cleaning cycle, just repeat above process.
- When cleaning is over, cut off the power. Open the cover, take the cleaned article out and drain the water.
CLEANING METHODS:
Three cleaning methods for this unit (in different situations)
General Cleaning
Use just simple water for general cleaning. (The water should merge the
article but not exceed the ruling mark.)
Enhanced Cleaning
- In professional places, use special cleaning liquid.
- For smeary hardware, adding about 5ml detergent into water to enhance cleaning.
Partly Cleaning
For large articles, partly cleaning as shown.
USER MAINTENANCE
-
Do not leave the cleaned article in the tank after cleaning.
-
Before drain the water, do cut off the power.
-
Clean the tank with water after using. (especially after using detergent.)
-
Wipe the tank with towel.
Prohibit washing the complete unit with water to reduce the risk of electrocution. -
Keep cool and dry.
-
Any repair should be performed by authorized service centers in our Guarantee Book.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>