MAGNASONIC CD2800 Ultrasonic Jewelry Cleaner User Guide
- June 15, 2024
- MAGNASONIC
Table of Contents
MAGNASONIC CD2800 Ultrasonic Jewelry Cleaner
Specifications
- Product Name: Ultrasonic Jewelry Cleaner
- Model: CD2800
- Power Supply: 120VAC, 60Hz
- Power Requirement: A power converter must be used for connecting to a 220~240VAC, 50Hz power supply
Product Usage Instructions
Checking Compatibility
Refer to the chart below to determine what can and cannot be cleaned using the CD2800:
| Items that can be cleaned | Items that cannot be cleaned |
|---|---|
| [List of compatible items] | [List of incompatible items] |
Filling the Tank
- Place the item you wish to clean inside the CD2800.
- Fill the tank with water, ensuring that the liquid covers the object completely.
Starting the Cleaning Process
- Press the ON button to begin the cleaning process. You will hear a buzzing sound indicating that the cleaner is active.
Automatic Stop and Manual Stop
The cleaner will stop automatically after 180 seconds. However, you can press the OFF button at any time to stop the cleaner manually.
Post-Cleaning Steps
- After cleaning is complete, unplug the unit from the power supply.
- Remove any items from the cleaner.
- When emptying the tank, pour out the water from the side to prevent water from coming in contact with the front control panel.
Frequently Asked Questions (FAQ)
Q: Can I use the ultrasonic cleaner on all types of jewelry?
A: Please consult your local jeweler if you are unsure about whether or not you should use the ultrasonic cleaner on your specific type of jewelry.
Q: What should I do if my silver items are tarnished?
A : Follow these steps to clean tarnished silver:
- Use the Ultrasonic Cleaner to remove dirt and grime.
- Mix a small amount of dish soap with warm water in a separate bowl.
- Dip a microfiber cloth into the soapy water.
- Rub the silver with a wet cloth to remove the tarnish.
- Rinse the silver item in cold water.
- Dry the item with a soft cloth.
- After removing the tarnish, buff the silver with another dry soft cloth to restore its shine.
- For a full manual, instructional videos, and other helpful resources, please visit us at: www.magnasonic.com/resources
Contact Information
- If you have any further questions or need assistance, please contact us:
- Website:www.magnasonic.com/support
Ultrasonic Jewelry Cleaner CD2800 Quick Start Guide v1.4
- This product requires a 120VAC, 60Hz power supply.
- A power converter must be used if connecting to a 220~240VAC, 50Hz power supply.
Items that can be cleaned
- Jewelry – necklaces, bracelets, rings, earrings, body jewelry
- Glasses & Watches – eyeglasses, sunglasses, waterproof watches, watchbands
- Hygiene Items – electric shaver heads, toothbrushes, dentures, razor blades
- Stationary – pen-heads, seals, rubber stamps
- Silver items that have dirt accumulation
- Other Items – tools, watch parts, coins, keychains, valves, machine nozzles, badges, instruments, filters, & kitchen utensils
Items that cannot be cleaned
- Glasses/sunglasses with pre-existing scratches or cracks in the coating
- Jewelry containing loose stones or soft/porous stones such as pearls, emeralds, amber, and opal
- NOTE: Please consult your local jeweler if you are unsure about whether or not you should use the ultrasonic cleaner on your specific type of jewelry.
INSTALLATION INSTRUCTION
- Refer to the chart on the left for what can/cannot be cleaned. Place the item inside the CD2800.
- Note: Tarnished metal will require additional cleaning steps. (See below)
- Fill the tank with water. Liquid should cover the object you wish to clean.
- Note: Running without a minimum of 1 cup (250ml) water can cause damage to the unit.
- Press ON to begin cleaning. You will hear a buzzing sound.
- The cleaner will stop automatically after 180 seconds. Press OFF to stop the cleaner at any time.
- After cleaning is done, unplug the unit from power and remove any items. When emptying the tank, make sure to pour out of the side so that water doesn’t come in contact with the front control panel.
Cleaning Silver
When silver items are exposed to air they will oxidize/tarnish. To remove the discoloration and restore shine you can use these steps.
What you’ll need:
- Ultrasonic Cleaner
- Dish Soap
- Warm Water
- A Microfiber Cloth
TIP: If you are unable to remove the tarnish with soapy water you can also use toothpaste and water on the cloth instead.
- Use the Ultrasonic Cleaner to remove dirt and grime
- Mix a small amount of dish soap with the warm water in a separate bowl
- Dip the microfiber cloth into the soapy water
- Rub the silver with the wet cloth to remove the tarnish
- Rinse the silver item in cold water
- Dry the item with a soft cloth
- After removing the tarnish the last step is to buff the silver with another dry soft cloth to restore its shine
- For a full manual, videos, and other helpful resources please visit us at: www.magnasonic.com/resources
- Questions?
- Give us a chance to help, we’re just a click away.
- Magnasonic.com/support
Documents / Resources
|
MAGNASONIC CD2800 Ultrasonic Jewelry
Cleaner
[pdf] User Guide
CD2800, CD2800-QSG, CD2800 Ultrasonic Jewelry Cleaner, CD2800, Ultrasonic
Jewelry Cleaner, Jewelry Cleaner, Cleaner
---|---