MAGNASONIC UC31S Ultrasonic Cleaner Instruction Manual

: June 17, 2024
: MAGNASONIC

Table of Contents

UC31S Ultrasonic Cleaner
SPECIFICATIONS:
IMPORTANT SAFEGUARDS
APPLIED USES
Product Drawing&indication
OPERATION GUIDANCE
USER MAINTENANCE
FCC STATEMENT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

UC31S
Ultrasonic Cleaner
User Instruction
Manual

UC31S Ultrasonic Cleaner

READ ALL INSTRUCTIONS BEFORE USING
SAVE THESE INSTRUCTIONS

The vibrating of washing liquid caused by Ultrasonic wave cleans off dust, smeary bits and dirt on the surface.
Features:
35watts of TRUE ULTRAS ONIC Power 42,000 cycle energy wave quiet,solid state circuitry 3 minutes auto shut off

SPECIFICATIONS:

NAME	Ultrasonic Cleaner	POWER SUPPLY	AC100-120V – 60Hz
ITEM NO.	UC31S	INPUT POWER	35W
DIM.	20X12.5X14cm	TIMER SETTING	3 minutes
TANK SIZE	600ml	WT	780g

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USING
DANGER-To reduce the risk of electrocution:

Always unplug this product immediately after using.
Do not use while bathing.
Do not place or store product where it can fall or be pulled into a tub or sink.
Do not place in or drop into water or other liquid.
Do not reach for a product that has fallen into water. Unplug immediately.
The product may be off or can’t be switched off when it is subjected to electromagnetic interference like Fast Transients or Surge voltage, but it can recover after being re-plugged in the socket, and then just follow the instruction described in this manual to set the function again for normal operation.

WARNING-To reduce the risk of burns, electrocution, fire, or injury to persons.

A product should never be left unattended when plugged in.
Close supervision is necessary when this product is used by, on, or near children or invalids.
Use this product only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
never operate this product if it has a damaged cord or plug. If it is not working properly, if it has been dropped or damaged, or dropped into water. Return the product to a service centre for examination and repair.
Keep the cord away from heated surfaces.
Never use while sleeping or drowsy.
Never drop or insert any object into any opening or hose.
This appliance is not intended for used by persons (including) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliances by a person responsible for their safety.

APPLIED USES

Jewelery Decorations	Opticals	Commodities

Necklaces, Fingers, Earrings, Bracelets, etc.	Glasses, Sun-glasses, Watch
chains, Waterproof watches, etc.	Electric shaver heads, Razor blades,

CAUTION

Do not clean the unit with organical solvents, diluents, abrasives.| Do not add too much water. Never let water overflow.
---|---
Before cleaning, filling with water is a must, otherwise the unit may be damaged.| Do not dissect the unit except the authorized serviceman.
Prohibit washing the complete unit with water, to reduce the risk of electrocution.| Repeat working cycle can enhance the cleaning effect.
While the interval is better longer than 5 minutes.
Unfirmly inlaid studs on decorations may shed off during cleaning.
Unfastened parts may also meet above problem.
Do not merge non—waterproof watch into water.

Product Drawing&indication

OPERATION GUIDANCE

Open the upper cover, put the article into the tank, then fill with water. (The water should merge the article but not exceed the ruling mark.)
Running without water can damage the unit!
Close the cover. Connect the unit with power. The Power Indication Light (Blue) on the inner cover will be on.
Press ON to start cleaning and the Working Indication Light (Red) on the upper cover will be on.
During cleaning, the”ZiZi” noise is normal, which Comes from tank working.
After 3 minutes, the cleaning automatically stops and the Red light turns off. Or press OFF to stop.For another cleaning cycle, just repeat above process.
When cleaning is over, cut off the power. Open the cover, take the cleaned article out and drain the water.

CLEANING METHODS:
Three cleaning methods for this unit (in different situations)
General Cleaning
Use just simple water for general cleaning.(The water should merge the article but not exceed the ruling mark.)
Enhanced Cleaning
In professional places, use special cleaning liquid.
For smeary hardware, adding about 5ml detergent into water to enhance cleaning.
Partly Cleaning For large articles, partly cleaning as shown.

USER MAINTENANCE

Do not leave the cleaned article in the tank after cleaning.
Before drain the water, do cut off the power.
Clean the tank with water after using. (especially after using detergent.)
Wipe the tank with towel.
Prohibit washing the complete unit with water to reduce the risk of electrocution.
Keep cool and dry.
Any repair should be performed by authorized service centers in our Guarantee Book.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.