SANUS F61 Fixed Position Wall Mounts Instruction Manual
- June 17, 2024
- SANUS
Table of Contents
F61 Fixed Position Wall Mounts
F 61 Instr
uction Manual
W e’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-888-333-9952 W e’re ready to help!
Thank you for choosing Sanus V uePoint! Please take a moment to let us know
how we did:
**** Call us: 1-888-333-9952
Email us: info@sanus.com
Leave a review: vuepoint.sanus.com
Find us on Facebook: SANUS
Follow us on Twitter @sanussystems
Milestone A V T echnologies and its affi liated corporations and subsidiaries
(collectively, “Milestone”), intend to make this manual accurate and complete.
However , Milestone makes no claim that the information contained herein
covers all details, conditions, or variations. Nor does it provide for every
possible contingency in connection with the installation or use of this
product. The information contained in this document is subject to change
without notice or obligation of any kind. Milestone makes no representation of
warranty, expressed or implied, regarding the information contained herein.
Milestone assumes no responsibility for accuracy, completeness or suffi ciency
of the information contained in this document.
IMPORTANT SAFETY INSTRUCTIONS
– SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’ s make sure this mount is perf ect for
you!
Does your TV (including accessor ies) w eigh more than 135 lbs. (61 k g)?| No
— Perfect!
Ye s — This mount is NOT compatible. V isit MountFinder .Sanus.com or call
1-888-333-9952 t o fi n d a compatible
mount.
---|---
2 What is your wall made of ?| 
3. Do you have all of the tools needed ?| 
4. Ready to begin?| Please read through these instructions completely to be
sure you’re comfortable with this easy install process.
Also check your TV owner’ s manual to see if there are any special
requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of
the installation, assembly or use of this product, contact Customer Service at
1 -888-333-9952.
CAUTION: A void potential personal injuries and property damage!
●This product includes directions and hardware for use with wood studs – D O
NOT install into drywall alone.
●The wall must be capable of supporting fi ve times the weight of the TV and
mount combined.
●Do not use this product for any purpose not explicitly specifi ed by
manufacturer .
●Manufacturer is not responsible for damage or injury caused by incorrect
assembly or use.
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item
to your dealer; contact Customer Service. Never use damaged parts!
NOTE : Not all hardware included will be used.
Parts and Hardware for STEP 1 Parts and Hardware for STEP 2 Parts
for STEP 3 (OPTIONAL)
Part for Adjustments
WARNING:** This product contains a magnet. If an implanted medical device such as a pacemaker or implantable cardioverter defi brillator (ICD) is in use, magnetic fi elds may aff ect the operation of those devices, resulting in serious injury or death. If you have an implanted medical device, keep at least 13 cm (5 in.) between your device and the magnet. Please consult with your physician or medical professional prior to using this product.
Attach TV Bracket to TV
1. 1 Select Y our TV Screws
CAUTION: Verify
thread engagement of the screw or spacer/screw combination in STEP 1.2.
— Too short will not hold the TV
— Too long will damage the TV
1.2 Attach the TV
Bracket
Center TV bracket 01 on your TV’s hole pattern and securely attach using
hardware confi guration A or B,depending on your TV needs.
Attach Wall Plate to Wall
WOOD STUD OPTION 2A
2.1 A Verify Your Wall
CAUTION: A void potential personal injuries and property damage!
- Drywall covering the wall must not exceed 5/8 in. (16 mm).
- Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm).
- Minimum horizontal space between fasteners: 16 in. (406 mm).
- Stud centers must be verified – not all walls have conventional 16 in. (406 mm).
2.2 A Find the Stud Centers Locate the studs using a stud finder . Probe
the wall with an awl or drill bit to verify the stud edges. Mark the center of
both studs.
2. 3 A Attach the Wall Plate Position wall plate 10 at your desired
height. Level, then mark the two hole locations.
Drill two pilot holes using a 1/8 in. (3.2 mm) drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (63 mm).
Install wall plate 10 with two washers 12 and screws 13 , using
bit 11.
Adjust leveling, if needed, then securely tighten both screws 13.
CAUTION: Improper use could reduce the holding power of screws 13 . DO
NOT over-tighten the screws.
CONCRETE OPTION 2A
2.1 B Verify Your Wall
CAUTION: A void potential personal injuries and
property damage!
- Minimum solid concrete thickness: 8 in. (203 mm).
- Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm).
- Minimum horizontal space between fasteners: 16 in. (406 mm).
- Mount wall plate 10 directly onto the concrete surface.
2.2 B Attach the Wall Plate
Position wall plate 10 at your desired height. Level,
then mark the two hole locations.
Drill two pilot holes using a 5/16 in. (8 mm) masonry
drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.75 in. (70 mm).
Never drill into the mortar between blocks.
Insert two anchors C1 (Fischer UX8x50R included in Concrete Anchor Kit*).
CAUTION: Be sure the anchors are seated flush with the concrete
surface.
Install wall plate 10 with two washers 12 and screws 13, using bit
11. Securely tighten both screws 13.
CAUTION: Improper use could reduce the holding power of screws 13. DO NOT
over-tighten the screws.
Attach TV to Wall Plate
3.1 Unlock the Wall Plate
Press the button on wall plate 10 to release the safety latch.
NOTE : “L” pin 16 is provided to release or engage the safety latch when
your TV is installed.
3. 2 Hang Y our TV
HEAVY! Use assistance with this step.
Use two people to hang the TV , to visually ensure TV bracket 01 is hung
correctly onto wall plate 10 (see side view).
IMPORTANT: DO NOT lower TV straight
down onto wall plate 10 — this will engage the lock. Safety latch must be
released for proper installation (See STEP 3.1).
3.3 Lock the Wall Plate
Press down on the safety latch until the button pops up AND you hear a
“click”.
NOTE : If needed, use “L” pin 16 to engage the safety latch.
3.4
NoT ilt Feature ( OPTIONAL )
Place magnetic leveling feet 14 in the lower corners of the TV.
If you used spacers 09 in STEP 1. 2,stack both magnetic leveling feet 14
together and place in the lower center of the TV.
Adjustments
Lateral Shift Slide the TV side to side. Make sure your TV is locked to wall plate 10 (STEP 3 . 3).
Level
Remove the TV .
Loosen both screws 13, adjust level, then retighten the screws (STEP 2 .
3).
Remove the TV
Disconnect your cables.
Unlock wall plate 10 (STEP 3 .1). Lift the TV up and away.
Dimensions (in.[mm] )
6902-002149 00
©2015 Milestone A V T echnologies. All rights reserved.
Sanus is a division of Milestone.
All other brand names or marks are used for identification
purposes and are trademarks of their respective owners.
SANUS • 6436 City W est Parkway
Eden Prairie, MN 55344 USA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>