IMFRCHCS B6 Smart Watch Instruction Manual

IMFRCHCS B6 Smart Watch

WHAT’S INCLUDE

Watch client download and connect

1. Download “JYouPro” APP
   It can be downloaded and installed on the mobile phone by scanning the QR code on the manual, scanning the built-in QR code of the watch, or directly searching “JYouPro” in the APP store.

2. Connect the Watch

3. Scan code connection: After Bluetooth is enabled on the mobile phone, enter the APP (Note: If the APP cannot be opened, please open the positioning and then open the APP) and click Device -> Add Device -> click Scan code binding (scan the QR code on the watch).

4. Manual connection: After Bluetooth is enabled on the mobile phone, enter the APP (Note: If the APP cannot be opened, Click Device -> Add Device -> Click Search Device (Find the device with the corresponding Bluetooth name and MAC address in “Settings” -> “System” -> “System Information” in the sliding control centre of the watch) -> Click Connect.

Charging and Activation

• The magnetic charger and the magnetic suction hole on the back of the watch aligned fit, until the watch screen appears charging prompt.
• When the watch prompts low power, please charge in time.
• The device is an all-in-one machine, the back shell and battery can not be removed.

Watch operation instructions

1. Menu page
   Slide up on the home screen to enter the menu page. Scroll up to the last page and select the menu style icon. Here you can choose the menu style. Press the right button on the menu style page to return to the home screen.

2. Function page
   Click on the application icon on the menu page to enter the corresponding function. Swipe to the right to go back, or simply press the right key to return to the main interface.

Buttons and touch controls

Watch Function Introduction

• Alarm
  After the watch is connected to the APP, you can set a single alarm clock, a cycle alarm clock, and up to 5 alarm clocks in the APP terminal.

• Stopwatch

  • Click the Start button to start the timing.
  • Click the Pause button to stop the timing.
  • Click the Reset button to return the timing to zero.

• Breath training

  • Users click on the corresponding time to perform breathing training.
  • Click Start and follow the ICONS in the breathing exercises to zoom in and zoom out.

• Blood pressure
  When entering the blood pressure measurement interface, the green light at the bottom will start the test and there will be a vibration reminder when the measurement is completed within 30 to 60 seconds.The measurement is based on PPG technology.

• Heart rate
  When you enter the heart rate measurement interface, the green light at the bottom will start to measure. When the measurement is completed in about 40 seconds, there will be a vibration reminder. If the message “Please wear the watch correctly” is displayed, you need to wear the watch again.

• Blood oxygen
  When entering the interface of blood oxygen measurement, the green light at the bottom will start the test for 30~60 seconds and there will be a vibration reminder when the measurement is completed.The measurement is based on PPG technology.

• Movement
  Sports mode options: walking, running, cycling, basketball, football, badminton, skipping rope, etc. Click the icon to start sports.

• Weather
  When the watch is connected to the APP, the weather interface will display real-time weather temperature and weather type.

• Messages
  After the watch is connected to the APP, you can open the push of relevant information on the APP terminal. The watch terminal can receive the corresponding push message and save up to 7 latest messages.

• Set up
  The Settings function includes screen display (switching dial, on-screen duration, brightness adjustment, wrister on-screen duration, and touchscreen clock), language, menu style, battery, and system.

• Music
  When the watch is connected to the APP, you can control the pause and start of the mobile music player and switch songs.

• Timer
  In the timing function, the system presets the common timing duration. You can click the corresponding duration to time quickly.

  • Click the Start button to start the timing
  • Click the Pause button to pause the timing
  • Click the Reset button to reset the timing to zero.

• Sleep
  The watch displays the total sleep duration as well as light and deep sleep duration last night.

• Movement data
  Display the number of steps, distance and calorie data recorded on that day. You can set the target number of steps, distance and calorie in the APP.

• Looking for a mobile phone
  After the watch is connected to the APP, click to find the phone, the phone will ring and the watch will show that the search is successful.lf the watch and the APP is not connected, watch side will prompt show bluetooth disconnect

• The control center
  Function description: screen brightness adjustment, Do not disturb mode, flashlight, Settings, system information, phone search, music playback.

Q&A

• The watch isn’t starting. What to do?
  Ans: Press the Power button for more than 6 seconds. Or, the battery may be low. Charge it in time.

• Bluetooth is not connected or cannot be connected. How to deal with that?
  Ans: You can try the following ways:

1. Please try to restart the watch and re-link.
2. Please try to restart Bluetooth and connect again.
3. Don’t connect your phone to other Bluetooth devices at the same time.

• The watch is measuring the heart rate, blood pressure, and blood oxygen data abnormally. Possible reasons?
  Ans: There could be several reasons for that. Here are a few of them:

1. Generally for measurement, the watch sensor and the human body might be in poor contact. Please check and work on that.
2. Please pay attention to full contact between the sensor and the wrist during measurement.

• Abnormal sleep data is showing. Possible reasons?

1. Sleep monitoring simulates people’s self-perceived state of falling asleep and waking up, which needs to be worn correctly.
2. If you wear it too late or when you fall asleep, errors may occur.
3. Sleep data is not monitored during the day, and the default sleep monitoring is from 9:00 PM to 11:00 noon the next day.  

For more frequently asked questions, please check the App[My >FAQ]

Bluetooth data transmission

When connected to a mobile phone, the watch synchronizes some data, including weather, notifications, sports and health data, with the phone via Bluetooth. When the connection is disconnected or Bluetooth is turned off, the data will not be synchronized.

Note:

1. Do not charge in a humid environment.
2. Please regularly use a clean flannelette to clean the magnetic suction charging hole on the back of the watch, to ensure that the magnetic suction charging hole and magnetic charger fit, to ensure normal charging.
3. This product is not equipped with a power adapter, to ensure the safety of the family and property, when charging, you can use the computer USB interface or choose a power adapter whose output is not more than 5V1A Please buy the power adapter through the regular channel, and avoid using the bottom quality and fake power adapter to avoid bursting or firing.

Matters needing attention

1. The measurement results of this product are only for industrial examination and are not used as any medical use or basis. Please follow the doctor’s guidance and do not use the measurement results for self-diagnosis and treatment.
2. this product’s waterproof grade is IP68, can not be used for deep diving and a long time in the water. In addition, this product does not put hot water, because the steam will affect the watch.
3. The Company reserves the right to modify the contents of this manual without prior notice. Some functions are different in the corresponding software version. This is normal.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>