UMI UM19054AU 15M Retractable Air Hose Reel User Manual

UMI UM19054AU 15M Retractable Air Hose Reel

Thank you for buying a UMI product. Your air hose reel has been engineered and manufactured to UM l’s high standard for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
A WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE

ABOUT COMPANY

• Distributed by:
• Hangzhou GreatStar Industrial Co., Ltd.
• No.35 Jiuhuan Road, Jiubao Town, Hangzhou 310019,
• China
• www.greatstartools.com

IMPORTANT SAFETY INSTRUCTIONS

Safety general safety instructions

To reduce the risks of electric shock, fire, and injury to persons, read all the instruc­tions before using the tool.
WARNING! When using tools, basic precautions should always be followed, including the following:

1. Work area safety

   • Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons.
   • Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool.

2. Personal safety

   • Stay alert. Watch what you are doing and use common sense when operating the tool.
     Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons.

   • Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts.

   • Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

   • Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions.

   • Always wear eye protection. Wear safety goggles.g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

3. Tool use and care

   • Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed.
   • Disconnect the tool from the air source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally.
   •  Store the tool when it is idle out of reach of children and other untrained persons. A tool is dangerous in the hands of untrained users.
   • Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool is damaged.
   • Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons.

4. Service

   • Tool service must be performed only by qualified repair personnel.
   • When servicing a tool, use only identical replacement parts. Use only authorized parts.
   •  Use only the lubricants supplied with the tool or specified by the manufacturer.

5. Air source

   • Never connect to an air source that is capable of exceeding 200 psi. Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury to persons. Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool. Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range.
   • When servicing a tool, use only identical replacement parts. Use only authorized parts.
   • Use only the lubricants supplied with the tool or specified by the manufacturer.

COMPONENTS

Package contents/ parts

1. Air inlet valve
2. Mounting plate
3. Carrying handle
4. Hose box
5. Guide roller bracket
6. Hose stopper
7. Air hose
8. Outlet to tool
9. Bolt & Anchor & Expanding sleeve 2x
10. Female and male quick couplers
11. Ptfe seal tape

TECHNICAL DATA

MOUNTING HOSE REEL

Choosing a Location

• A Do not mount hose reel outdoors or on vehicle. This hose reel is not designed to resist constant exposure to  weather or continuous vibration. Mount under cover in an area not directly exposed to weather.
• Reel can be mounted on the ceiling, or wall, wherever it is convenient. When choosing a location, remember that you can only mount reel to a load-bearing structural member capable of supporting combined weight of reel, hose, and forces caused by pulling or manuevering hose. Mounting reel near air compressor may be desirable since you can connect the two with a shorter, less expensive length of hose. Also, air compressor controls will be conveniently nearby.

OPERATING INSTRUCTIONS

NOTICE: To improve hose longevity, pressurize hose to operating pressure before extending or retracting.

1. Check the reel operation by slowly pulling the hose out.
2. To lock the hose, as this reel is fitted with track lock wheel and detent design, When pull out the hose, you can latch the hose at any length.
3. To unlock the hose, just need to pull out about 3-5cm more and release, it will retract automatically, let it retract until the hose stopper hits the hose guide.
4. Attach the coupler to your air compressor hose and apply thread seal tape to the Inlet fitting on the reel. Connect the coupler to the inlet fitting.
5. Connect your air tool to the other end of the hose using another coupler and thread seal tape.
6. Follow all instructions from the air tool and compressor for set up and use.
7.  When finished using the hose, disconnect the air tool and retract the hose. Wipe the hose reel clean with a dry cloth.

NOTICE: Hold on to the hose while it is rewinding, to avoid the personal injury and damage to the hose reel.

CLEAN AND MAINTENANCE

WARNING! TO PREVENT SERIOUS INJURY:
Detach air supply from this product before performing any inspection, maintenance, or cleaning procedures.

1. BEFORE EACH USE, inspect the general condition of the tool. Check for:
   • Loose hardware or housing,
   • Misalignment or binding of moving parts,
   • Cracked or broken parts, and
   • Any other condition that may affect its safe operation.
2. AFTER EACH USE, re-wind the hose onto the reel and wipe the Hose Reel clean with a dry cloth.
   WARNING! Internal spring is not userserviceable or user-replaceable.

EC DECLARATION OF CONFORMITY

Herewith we,

• Yongkang Naiboen Industrial & Trading Co.,Ltd.

• No.2 Xingan Road, Xialixi Industrial Area, Yongkang City, Zhejiang, P.R.China

• Declare that the following Appliance complies with the appropriate basic safety and health require­ments of the EC Directives(see item 4) based on its design and type, as brought into circulation by us.

• This declaration relates exclusively to the machinery in the state in which it was placed on the market, and excludes components which are added and/or operations carried out subsequently by the final user.

  1. Product: Air hose reel

  2. Model No.: NWA-D15 I UM19054AU

  3. Serialnumber: N/A

  4. Applicable EC Directives: Machinery Directive 2006/42/EC
     Used Harmonized Standards: EN ISO 12100: 2010

  5. Responsible for documentation: (C&E Connection E-Commerce (DE) GmbH Zurn Linnegraben 20, 65933, Frankfurt am Main, Germany info@ce-connection.de)

  6. Additional used EC Directives: N/A

  7. Date/place/Name/Authorized signature 2021-3-14/Yongkang/Zheng Shi

  8. Title of Signatory: Engineer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>