FUNFOR S01T Wireless Charger Night Light Instruction Manual

S01T WIRELESS CHARGER NIGHT LIGHT
INSTRUCTION MANUAL

S01T Wireless Charger Night Light

Thank you for choosing our products please read this manual carefully before using the products.

FEATURES

• Simple and exquisite.
• Night light.
• Wireless speaker
• Alarm clock
• Wireless fast charger.
• Charging distances<6mm.

PRODUCT DESCRIPTION

1. Charging area
2. Touch switch
3. Lampshade
4. Clock display area
5. Type-C interface
6. Function button
7. Silicone feet nails

HOW TO USE

1. Connect the USB port of the USB data cable to the power adapter and the Type-C end.Wireless charger.
2. After the product is powered on, the product indicator light is always blue.
3. Place the device that needs to be charged in the charging indication area of this product.The white light is always on and it enters the charging state.
4. Touch Control Dimmable Lamp

• Short touch turns on the light in sequence from 30% of the white light to 70% of the white light.
  Brightness-Colorful lights-turn on the lights in sequence.

• Long touch to turn off the light.

FEATURES

HOW TO SET THE CLOCK

In normal clock display mode:

• Short press [ ] inthe clock display area, the clock starts to flash, and enter the clockSet status.Short press [ ] to increase the number, short press [ ] to decrease the number.

• Short press[ ] again to switch minutes, the minutes will start to flash and enter the minutes.Set status.
  Short press[ ] toincrease the number, short press[ ] to decrease the number.

• Long press[ ]|tosave the current settings and return to the time display.

HOW TO SET THE ALARM

In normal clock display mode: alarm setting method 1

• Long press[ ] inthe clock display area, the alarm1[ ] icon and the clock start Flashes and enters the alarm 1 clock setting state.Short press [ ] to increase the number, short press [ ] to decrease the number.
• Short press [ ] again to switch minutes, the minutes will start to flash and enter the minute setting state.Short press [ ] to increase the number, short press [ ] to decrease the number. Long press [ ] tosave the current settings.
• The setting method of Alarm 2 is the same as Alarm 1.
• Clock display area alarm icon which icon is displayed for which alarm is effective

In normal clock display mode: alarm setting method 2

• Short press [ ] 4 times, the clock display area, the alarm icon [ ] and the clock are at the same time Flashing, enter the alarm clock setting state. Short press[ ]toincrease the number.Short press [ ] to decrease the number.
• Short press [ ] again to switch to the minutes, the alarm icon [ ] and the minutes will flash at the same time, entering the minute setting state.Short press [ ] to increase the number, short press [ ] to decrease the number.
• Short press [ ] again. The alarmicon [ ] and the clock will flash at the same time to enter Alarm 2.Setting, the setting method of Alarm 2 is the same as Alarm 1.

Turn alarm on/off

• Short press [ ] toturn on or off Alarm 1.
• Short press [ ] to turn onor off Alarm 2.

Adjust alarm volume

• When the alarm sounds, short press [ ] toincrease the volume, and short press [ ] to decrease the volume.

snooze

• When the alarm rings, briefly touch the night light switch to snooze. The snooze duration is 5 minutes.Can snooze 4 times.
• The alarm clock enters the snooze state, the alarm icon inThe screen display area flashes.
• The snooze is not over yet, long touch the night light switch to cancel the snooze state.

Alarm sound source and lighting settings

• Short press [ ] to select the sound source, short press [ ] to select the lighting.
• Long press the function button Alarm 1 or Alarm clock display area, If the alarm icon flashes 3 times and goes out, the sound source and light are set successfully.
• Remarks:
  There are 7 sound sources (birds-ocean-rain-stream-tree- wind-drops of natural sounds).
  8 lighting modes (colorful gradient light—purple light—warm yellow light — cool white light —Yellow/red rolling light — green/blue rolling light — blue/purple rolling light — colorful gradient rolling light.)

HOW TO SWITCH 12/24 HOURS

In normal clock display mode:

• Short press[ ] 3times, the clock display area 12/24 starts to flash, and enters the setting state.
• Short press [ / ] toswitch between 12/24 hours.
• Long press[ ]tosavethe current settings and return to the time display.

ADJUST SCREEN BRIGHTNESS

• Short press [ ] to adjust the clock screen brightness.High brightness – medium brightness – low brightness – off to adjust the screen brightness in sequence.

HOW TO TURN ON NATURAL SOUNDS

In normal clock display mode:

• Short press [ ] to turn on natural sound, long press [ ] to turn off natural sound.

When natural sound is on:

• Short press [ ] to increase the volume, Short press [ ] to decrease the volume.
• Short press [ ] to cycle through the natural sounds of birds-ocean-rain-stream-tree-wind-drops.
• Double click [ ] to start flashing in 30 minutes and enter the countdown setting.Short press [ ] to cycle through 60-90-30. After 3 seconds without any operation, the countdown begins.The clock display area displays the remaining time of the  countdown. After the countdown is over, a natural sound automaticallyAutomatically close.

If you want to cancel the countdown before the countdown is over, double-click [ ] to exit the countdown.

HOW TO USE COLORFUL LIGHTS

In normal clock display mode:

• Short press [ ] to cycle through 8 lighting modes (colorful gradient light — purple light — warm yellow light — cool white light —Yellow/red rolling light — green/blue rolling light — blue/purple rolling light — colorful gradient rolling light.)
• Long press [ ] to turn off the light.

APPLICABLE EQUIPMENT

Intelligent identification of charging equipment; compatible with major brands and mobile devices that meet QI standards iPhone: New models after iPhone 8 that support wireless charging can be used.
Samsung: New models after GalaxyS6 that support wireless charging can be used.
Huawei: New models after Mate RS that support wireless charging can be used.
Xiaomi: New models after MIX2S/MIX3 that support wireless charging can be used.
Note:
This product supports fast wireless charging and meets the Qi wireless charging standard; short-distance wireless power tran smission is realized through magnetic induction, and this device supports all wireless charging devices that meet the QI standard. When using a 5V output adapter, the wireless charger supports 5W load.The wireless charger supports 5W/7.5W/10W 15W charging when using QC2.0/3.0 standard adapter.
This product will enter an over-voltage protection state when the input voltage is greater than or equal to 10.5V.

PRECAUTIONS

• Do not use or store the product in a place exposed to direct sunlight or high temperature for along time.
• Do not charge in places that are too close to magnetic cards, magnetic recording media, and precision instruments.
• Do not disassemble or modify this product.
• Do not touch the AC adapter with wet hands.
• Keep this product away from water or other liquids.
• If you want to clean the product, please disconnect the power.
• Product working environment temperature range: -20—45°C.

SPECIFICATIONS.

Product material: Imported ABS +PP
Power input: DC5V/3A 9V/2.1A
Charging efficiency: 75%
Battery capacity: 1800mAh
Charging power: 5W/7.5W/10W/15W
Product size: 220x100x88mm
Product weight: 490g
The power charging port is an internationally accepted Type C port.

PACHAGING CONTENTS

1Instruction
1Packing box
1*USB Power cord

Made in China

Documents / Resources

| FUNFOR S01T Wireless Charger Night Light [pdf] Instruction Manual
S01T Wireless Charger Night Light, S01T, Wireless Charger Night Light, Charger Night Light, Night Light, Light
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>