beko RDNE455E40DBN Mount Freezer Stainless User Manual

: June 17, 2024
: Beko

Table of Contents

beko RDNE455E40DBN Mount Freezer Stainless
Product Information
Safety Instructions
Environmental Instructions
Your Refrigerator
Installation
Preparation
Control Panel of the Product
Using The Product
- Storing Food in the Freezer and Cooler Compartment
Product Features
- Dairy Products Cold Storage Area
Maintenance and Cleaning
Troubleshooting
Read User Manual Online (PDF format)
Download This Manual (PDF format)

beko RDNE455E40DBN Mount Freezer Stainless

beko-RDNE455E40DBN-Mount-Freezer-Stainless-PRODUCT

Product Information

Specifications

Model: RDNE455E40DBN D70455NE
Language: EN, BG, T
Energy Label: AA
Date: 22/11/23
Time: 13:20
Manufacturer Part Number: 7297343180

Safety Instructions

The refrigerator is intended for use in staff kitchens of stores, offices, and other working environments.

Safety of Children, Vulnerable Persons and Pets

Ensure that children, vulnerable persons, and pets are supervised and kept away from the refrigerator to prevent accidents or injuries.

Electrical Safety

To ensure electrical safety, follow these guidelines:

Do not connect the refrigerator to a multi-plug or portable power source.
Do not plug the power cord into a loose or damaged power outlet.
If possible, install a mechanism (fuse, switch, main switch) that disconnects all terminals from the mains.
Avoid using the refrigerator with an external switching device or timer.
Avoid touching the power cord or plug with wet hands or bare feet.
When unplugging the refrigerator, pull the plug instead of the power cord.

Handling Safety

Follow these handling safety precautions:

Do not attempt to repair or replace any component of the refrigerator unless specified in the user manual. Avoid modifications to the product.
Use appropriate protective equipment (gloves, etc.) during installation, maintenance, and repair.

Installation Safety

Ensure installation safety with the following guidelines:

Inspect the refrigerator for any damage before installation.
Place the refrigerator on a level and hard surface, balancing it with the adjustable legs.
Install the refrigerator in a dry and ventilated environment, avoiding carpets or similar covers underneath.
Ensure proper ventilation by maintaining sufficient space around the refrigerator and not blocking any ventilation holes.
Check the supply cable for any damage or pinching.
Avoid connecting the refrigerator to supply systems or power sources that may cause sudden voltage changes.
Keep the refrigerator away from heat sources such as stoves, ovens, and heating units.

FAQ

Q: Can I repair the refrigerator myself?

A: No, unless it is specified in the user manual, it is recommended to have installation and repair operations performed by the manufacturer, authorized service, or a person described by the importer company.

Q: Can I use a multi-plug or portable power source?

A: No, it is not recommended to connect the refrigerator to a multi-plug or portable power source. Use a dedicated power outlet instead.

Q: Can I use the refrigerator in an outdoor environment?

A: It is not recommended to expose the refrigerator to rain, snow, sunlight, or wind. Avoid using it in open or enclosed external environments such as vessels, camper vans, balconies, or terraces.

Please read this manual first!

Dear Customer

Please read this manual before using the product.
Thank you for choosing this Beko product. We would like you to achieve optimal efficiency from this high-quality product which has been manufactured with state-of-the-art technology.
To do this, carefully read this manual and any other documentation
provided before using the product and keep it as a reference.
Heed all information and warnings in the user manual. This way, you will protect yourself and your product against the dangers that may occur.
Keep the user manual. Include this manual with the unit if you hand it over to someone else.

The following symbols are used in the user manual:

Hazard that may result in death or injury.
Important information or useful tips on operation.
Read the user manual.
Combustible material, warning against fire hazards.
NOTICE A hazard that may cause material damage to the product or its surroundings
The model information as stored in the product database can be reached by entering the following website and searching for your model identifier (*) found on the energy label.
https://eprel.ec.europa.eu/ .

Safety Instructions

This section includes the safety instructions necessary to prevent the risk of personal injury or material damage.
Our company shall not be held responsible for damages that may occur if these instructions are not observed.
Always have installation and repair operations performed by the manufacturer, authorized service, or a person who will be described by the importer company.
Use original spare parts and accessories only.
Do not repair or replace any component of the product unless it is specified in the user manual.
Do not perform any modifications on the product.

Intention of Use

This product is not suitable for commercial use and should not be used for a purpose other than its intended use.
This product is intended for operating interiors, such as households or similar.

For example;

In the staff kitchens of the stores, offices, and other working environments,
In farmhouses,
In the units of hotels, motels, or other resting facilities that are used by the customers,
In hostels, or similar environments,
In catering services and similar non-retail applications.
This product shall not be used in open or enclosed external environments such as vessels, camper vans, balconies, or terraces. Exposing the product to rain, snow, sunlight, and wind may cause a risk of fire.

Safety of Children, Vulnerable Persons and Pets

This product may be used by children aged 8 years and older and persons with under-developed physical, sensory, or mental capabilities or lack of experience and knowledge if they are being supervised or have been given instruction concerning the use of the appli-ance in a safe way and the hazards involved.
Children between 3 and 8 years are allowed to put and take out food into/from the cooler product.
Children and pets must not play with, climb on, or get inside the product.
Children and pets must be kept away from the cabin area (compressor) where electrical parts are located.
Cleaning and user maintenance must not be performed by children unless someone is overseeing them.
Keep the packaging materials away from children. Risk of injury and suffocation.

Electrical Safety

The product shall not be plugged into the outlet during installation, maintenance, cleaning, repair, and transportation operations.
If the power cable is damaged, it shall only be replaced by an authorized service to avoid any risks that may occur.
Do not tuck the power cable under the product or to the rear of the product. Do not put heavy items on the power cable.
The power cable should not be bent, crushed, or come into contact with any heat source.
Do not use an extension cord, multi-plug, or adaptor to operate your product.
Portable multi-plugs or portable power supplies may overheat and cause fire. Thus, do not have a multi-plug, portable power source behind or in the vicinity of the product.
Do not plug the product’s power cord into a loose or damaged power outlet. These types of connections may overheat and cause fire.
The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation.
The product must not be operated with an external switching device such as a timer, or a remote-controlled system.
Do not use the product when your feet are bare or your body is wet.
Do not touch the plug with wet hands.
When unplugging the appli-ance, don’t hold the power cord, but the plug.

Handling Safety

Make sure to unplug the appli-ance before carrying the product.
This product is heavy, do not handle it by yourself. Injuries may occur if the product falls on you. Do not bump into places or drop the product while transporting it.
Always close the doors and do not hold the product by its doors while transporting it.
Be careful not to damage the cooling system and the pipes while handling the product. Do not operate the product if the pipes are damaged, and contact an authorized service.

Installation Safety

Contact the Authorized Service for the product’s installation. To prepare the product for use, see the information in the user manual and make sure the electric and water utilities are as required. If not, call a qualified electrician and plumber to arrange the utilities as necessary. Failure to do so may result in electric shock, fire, prob-lems with the product, or injury.
This product is designed for use at a maximum altitude of 2000 meters above sea level.
Keep children away from the installation area.
Check for any damage to the product before installing it. Do not have the product installed if it is damaged.
Always use personal protective equipment (gloves, etc.) during product installation, maintenance, and repair. Risk of Injury!
Place the product on a clean, level, and hard surface and balance it with the adjustable legs (by rotating the front feet to the right or left). Otherwise, the refrigerator may tip over and cause injuries.
The product shall be installed in a dry and ventilated environment. Do not keep carpets, rugs, or similar covers under the product. This may cause a risk of fire as a result of inadequate ventilation!
Do not block or cover ventilation holes. Otherwise, power consumption increases, and your product may be damaged.
When placing the product, make sure that the supply cable is not damaged or pinched.
The product must not be connected to supply systems and power sources which may cause sudden voltage changes (i.e. a portable solar-energy power source).
Otherwise, damage to your product may occur as a result of the abrupt voltage fluctuations!
The more refrigerant a refrigerator contains, the bigger its installation room shall be. In very small rooms, a flammable gas-air mixture may occur in case of a gas leak in the cooling system. At least 1 m³ of volume is required for each 8 grams of refrigerant.
The amount of refrigerant available in your product is specified in the Type Label.
The product must never be placed in such a way that power cables, the metal hose of the gas stove, metal gas, or water pipes come into contact with the product’s rear wall (or the condenser).
The installation place of the product must not be exposed to direct sunlight and it shall not be in the vicinity of a heat source such as stoves, radiators, etc. If you cannot prevent installation of the product in the vicinity of a heat source, use a suitable insulation plate and make sure the minimum distance to the heat source is as specified below:
At least 30 cm away from heat sources such as stoves, ovens, heating units, heaters, etc.,
And at least 5 cm away from electrical ovens.
Your product has the protection class of I.
Plug the product in a grounded socket that conforms with the Voltage, Current, and Frequency values specified in the type label. The socket must have a 10A – 16A fuse. Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with local and national regulations.
The product’s power cable must be unplugged during installation. Otherwise, the risk of electric shock and injury may occur!
Do not plug the product’s power cord in loose, dislo-cated, broken, dirty, or oily power outlets which have a risk of water contact. These types of connections may cause overheating and fire.
Place the power cable and hoses (if any) of the product so that they do not cause a risk of tripping over.
Penetration of humidity and li-quid to live parts or to the power cord may cause a short circuit. Thus, do not use the product in humid environments or in areas where water may splash (e.g. garage, laundry room, etc.) If the refrigerator is wet by water, unplug it and contact an authorized service.
Do not ever connect your refrigerator to power-saving devices. These systems are harmful to the product.
There is a risk of contact with electrical parts when removing the electronic board cover and the compressor rear cover (if fitted). Do not remove the electronics board cover and the compressor rear cover (if fitted). There is a risk of electrocution!

Operational Safety

Do not ever use chemical solvents on the product. These materials contain an explosion risk.
In case of a failure of the product, unplug it and do not operate until it is repaired by the authorized service. There is a risk of electric shock!
Do not touch the inner walls, metal parts of the freezer, or food kept inside the freezer with wet hands. Risk of frost-bite!
Do not place soda cans or cans and bottles that contain fluids that may be frozen in the freezer compartment. Cans or bottles may explode. Risk of injury and material damage!
Do not use or place materials sensitive to temperature such as flammable sprays, flammable objects, dry ice, or other chemical agents in the vicinity of the refrigerator. Risk of fire and explosion!
Do not store explosive materials such as aerosol cans with flammable materials inside the product.
Do not place cans containing fluids over the product in an open state. The splashing of water on an electrical part may cause an electric shock or a fire.
Due to the risk of breaking, do not store glass containers with liquid inside in the freezer compartment.
This product is not intended for the storage and cooling of medicines, blood plasma, laboratory preparations, or similar materials and products that are subject to the Medical Products Directive.
If the product is used against its intended purpose, it may cause damage to or deterioration of the products stored inside.
If your refrigerator is equipped with blue light, do not look at this light with optical devices. Do not stare directly at UV LED light for a long time. Ultraviolet rays may cause eye strain.
Do not fill the product with more content than its capacity. Injuries or damages may occur if the contents of the refrigerator fall when the door is opened. Similar problems may also occur when an object is placed over the product.
Ensure that you have removed any ice or water that may have fallen to the floor to prevent injuries.
Change the locations of the racks/bottle racks on the door of your refrigerator only when the racks are empty. The danger of injury!
Do not place objects that may fall/tip over on the product. These objects may fall while opening or closing the door and cause injuries and/or material damage.
Do not hit or exert excessive pressure on glass surfaces. Broken glass may cause injuries and/or material damage.
The cooling system in your product contains R600a refrigerant. The refrigerant type used in the product is specified in the type label. This gas is flammable.
Therefore, be careful not to damage the cooling system and the pipes while operating the product.

In case of damage to the pipes;

Do not touch the product or the power cable.
Keep the product away from potential sources of fire that may cause the product to catch fire.
Ventilate the area where the product is placed. Do not use a fan.
Contact Authorized Service. If the product is damaged and you observe a gas leak, please stay away from the gas. Gas may cause frostbite if it contacts your skin.

Before disposing of old products that shall not be used anymore:

Unplug the power cord from the main socket.
Cut the power cable and remove it from the appliance together with the plug.
Do not remove the racks and drawers from the product to prevent children from getting inside the appliance.
Remove the doors.
Store the product so that it shall not be tipped over.
Do not allow children to play with the scrapped product.

Do not dispose of the product by throwing it into fire. Risk of explosion.
If there is a lock available on the product’s door, keep the key out of children’s reach.

For Products with Water Dispensers / Icematic

Use only drinking water. Do not fill the water tank with fruit juice, milk, fizzy beverages, alcoholic beverages, or any other liquids incompatible with use in the water dispenser.
This may cause risk to your health and safety.
Do not allow the children to play with the water dispenser or schematic to prevent accidents and injuries.
Do not insert your hands, fingers, or other objects inside the hole of the water dispenser, ice channel, or inside the container of the schematic. This may cause injuries or material damage.
The hose-sets supplied with the product shall be used. Do not use the old hose-sets. Do not extend the hoses!
Always connect your product to the cold water inlet. Do not install the hot water inlet. The pressure for the cold water inlet shall be 90 PSi (620 kPa – 6.2 bar) maximum.
If your water pressure exceeds 80Pi (550 kPa – 5.5 bar) or has a water impact effect, use a pressure limiting valve on your mains system. Ask help from professional plumbers if you do not know how to control your water pressure.
High pressure may cause damage to the hose connections and pose a risk of flooding.
Take required precautions against the risk of freezing of hoses. The operating water temperature interval shall be 0.6°C (33°F) minimum and 38°C (100°F) maximum.
There is a risk of flooding if the hose is cracked/perforated.

Food Storage Safety

Please pay attention to the following warnings to avoid food spoilage:
Leaving the doors open for a long time may cause the temperature inside the product to rise.
Regularly clean the accessible drainage systems in contact with food.
Clean the water tanks that have not been used for 48 hours and mains-fed water systems that have not been used for more than 5 days.
Store raw meat and fish products in appropriate compartments within the product. Thus, it does not drip on or come into contact with other foods.
Two-star freezer compartments are used for storing pre-filled foods and making and storing ice and ice cream.
One, two, and three-star compartments are not appropriate for freezing fresh food.
If the cooling product has been left empty for a long time, turn off the product, defrost, clean, and dry the product to protect the housing of the product.

Maintenance and Cleaning Safety

Unplug the refrigerator before cleaning it or starting to perform maintenance.
Do not pull by the door handle if you shall move the product for cleaning purposes. Handle may cause injuries if it is pulled too hard.
Do not put your hands etc. under the refrigerator. Jamming may occur or any sharp edge may cause personal injuries.
Do not clean the product by spraying or pouring water on the product and inside the product. Risk of electric shock and fire.
When cleaning the product, do not use sharp and abrasive tools or household cleaning agents, detergent, gas, gasoline, thinner, alcohol, varnish, and similar substances.
Use only cleaning and maintenance agents that are not harmful to food inside the product.
Do not ever use steam or steamed cleaning materials for cleaning the product and thaw-ing the ice inside it. Steam contacts the live areas in your re-frigerator and causes short cir-cuit or electric shock.
Do not use any mechanical tools or any other tools than the recommendations of the manufacturer to speed up the defrost operation.
Take care to keep water away from the ventilation holes, electronic circuits, or lighting of the product.
Use a clean, dry cloth to wipe the dust or foreign material on the tips of the plugs. Do not use a damp piece of cloth to clean the plug. Otherwise, a risk of fire or electric shock may occur.

Disposal of the Old Product

When disposing of your old product follow the instructions below:
To prevent children from accidentally locking themselves into the product, if there is a door lock, disable it.
A splash of coolant is harmful to the eyes. Do not damage any part of the cooling system while disposing of the product.
It may be fatal if the compressor oil is swallowed or if it penetrates the respiratory tract.
The cooling system of your product includes R600a gas as specified in the type label. This gas is flammable. Do not dispose of the product by throwing it into fire. Risk of explosion!
C -Pentane is used as a blowing agent in the insulation foam and it is a flammable substance. Do not dispose of the product by throwing it into fire.

Environmental Instructions

Compliance with the WEEE Directive and Disposal of the Waste Product appliance helps prevent potential negative consequences for the environment and human health.
This product complies with the EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This symbol indicates that this product shall not be disposed of with other household wastes at the end of its service life. Used devices must be returned to an official collection point for the recycling of electrical and electronic devices.
To find these collection systems please contact your local authorities or retailer where the product was purchased. Each household performs an important role in recovering and recycling old appliances. Appropriate disposal of used

Compliance with RoHS Directive

The product you have purchased complies with the EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information

The packaging materials of the product are manufactured from recyclable materials under our National Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.

Your Refrigerator

Freezer compartment door shelf
Water dispenser filling tank
Cooler compartment door shelf
Water dispenser reservoir
Storage container under a door shelf
Movable door shelf
Adjustable legs
Crisper
Zero degree compartment
Lock and Key
Bottle shelf
Cooler compartment glass shelf
Fan
Ice Container
Freezer compartment shelf
Ice making capacity
Fan
Freezer compartment
Cooler compartment

Optional: Figures in this user manual are schematic and may not exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models.

Installation

Read the “Safety Instructions” section first!

Right Place For Installation

Contact the Authorized Service for the product’s installation. To prepare the product for installation, see the information in the user manual and make sure the electrical and water utilities are as required.
If not, call an electrician and plumber to arrange the utilities as necessary.

WARNING:

The manufacturer assumes no responsibility for any damages caused by the work carried out by unauthorized persons.

WARNING:

The product’s power cable must be unplugged during installation. Failure to do so may result in death or serious injuries!

WARNING:

If the door span is too narrow for the product to pass, remove the door and turn the product sideways; if this does not work, contact the authorized service.
Place the product on a flat surface to avoid vibration.
Place the product at least 30 cm away from the heater, stove, and similar sources of heat and at least 5 cm away from electric ovens.
Do not expose the product to direct sunlight or keep it in damp environments.
Your product requires adequate air circu-lation to function efficiently. If the product will be placed in an alcove, remember to leave at least 5 cm clearance between the product and the ceiling, rear wall, and side walls.
Check if the rear wall clearance protection component is present at its location (if provided with the product).
If the component is not available, or if it is lost or fallen, position the product so that at least 5 cm clearance shall be left between the rear surface of the product and the wall of the room.
The clearance at the rear is important for the efficient operation of the product.

Electrical Connection

Do not use extension or multi sockets in the power connection.
The damaged power cable must be replaced by Authorized Service.
When placing two coolers in an adjacent position, leave at least a 4 cm distance between the two units.

Adjusting the Legs

If the product is not in a balanced position, adjust the front adjustable legs by rotating them to the right or left.

Hot Surface Warning

The side walls of your product are equipped with cooler pipes to enhance the cooling system. High-pressure fluid may flow through these surfaces, and cause hot sur-faces on the side walls.
This is normal and it does not require servicing. Be careful when you contact these areas.

Preparation

Read the “Safety Instructions” section first!

What To Do For Energy Saving

Connecting the product to electronic energy-saving systems is harmful, as it may damage the product.
This refrigerating appliance is not intended to be used as a built-in appliance.
Do not keep the refrigerator doors open for long periods.
Do not place hot food or beverages in the refrigerator.
Do not overfill the refrigerator; blocking the internal airflow will reduce cooling capacity.
Since hot and humid air will not directly penetrate your product when the doors are not opened, your product will optimize itself in conditions sufficient to protect your food.
Under these circumstances, functions and components such as compressor, fan, heater, defrost, lighting, display, and so on will operate according to the needs by consuming minimum energy.
In case multiple options are present, glass shelves must be placed so that the air outlets at the rear wall are not blocked and preferably, in a way that air outlets remain below the glass shelf.
This combination may help improve air distribution and energy efficiency.
Using the below drawer when storing is strongly recommended.
Food shall be stored using the drawers in the cooler compartment to ensure energy saving and protect food in better conditions.

First Use

Before using your refrigerator, make sure the necessary preparations are made in line with the instructions in the “Safety and Environmental Instructions” and “Installation” sections.
Keep the product running without placing any food inside for 6 hours and do not open the door, unless necessary.
The temperature change caused by opening and closing the door while using the product may normally lead to condensation on the door/body shelves and glassware placed in the product.
A sound will be heard when the compressor is engaged. It is normal for the product to make noise even if the compressor is not running, as fluid and gas may be compressed in the cooling system.
It is normal for the front edges of the refrigerator to be warm. These areas are designed to warm up to prevent condensation.
For some models, the indicator panel turns off automatically 1 minute after the door closes. It will be re-activated when the door is opened or any button is pressed.

Climate Class and Definitions

Please refer to the Climate Class on the rating plate of your device. One of the following information applies to your device according to the Climate Class.
SN: Long-Term Temperate Climate: This cooling device is designed for use at ambient temperatures between 10 °C and 32 °C.
N: Temperate Climate: This cooling device is designed for use at ambient temperatures between 16°C and 32 °C.
ST: Subtropical Climate: This cooling device is designed for use at ambient temperatures between 16°C and 38°C.
T: Tropical Climate: This cooling device is designed for use at ambient temperatures between 16°C and 43°C.

Control Panel of the Product

beko-RDNE455E40DBN-Mount-Freezer-Stainless-FIG-4

Freezer compartment temperature setting key
Energy saving (Display off indicator)
Quick freezing key 4 *Deodoriser Module Key
Cooler compartment temperature setting key
Error Status indicator
Cooler compartment Off (Vacation) function key

Read the “Safety Instructions” section first.
Optional: Shown functions are optional, there may be differences of shape and location in functions found on your appliance’s indicator panel.
Auditory and visual functions on the indicator panel will assist you in using the refrigerator.

Freezer Compartment Temperature
- Setting Key
- This allows temperature setting for the freezer compartment. When you press on the key, the freezer compartment temperature may be set to -18, -20, -22, or -24 Celsius values.
Energy Saving (Display Off) Indicator
- Energy energy-saving function is enabled automatically and the energy-saving symbol lights up when the door of the product is not opened or closed for a while.
- When the energy-saving function is active, all symbols on the screen except the energy-saving symbol will be turned off.
- When the energy-saving function is active, pressing any key or opening the door will deactivate the energy-saving function and the display signals will return to normal.
- The energy saving function is a function activated ex-factory and cannot be canceled.
Quick Freezing Key
- When the quick freezing key is pressed, the LED on the key is illuminated and the quick freezing function will be activated. The freezer compartment temperature is set to -27 Celsius.
- Press the key again to cancel the function. The quick freezing function will be canceled automatically. To freeze a large amount of fresh food, press the quick freezing key before placing the food in the freezer compartment.
Deodoriser Module Key
- Press this key for 3 seconds to activate/deactivate the deodorizer feature. When the deodorizer feature is active, the LED on the respective key is illuminated.
- When the feature is active, the deodorizer module will be operated periodically.
Cooler Compartment Temperature
- Setting Key
- Allows setting of temperature for the cooler compartment. Pressing the key will enable the cooler compartment temperature to be set at 8, 6, 4, and 2 Celcius.
Error Condition Indicator
- This indicator will be active when your refrigerator cannot perform adequate cooling or in case of any sensor error. “E” will be displayed on the freezer compartment temperature indicator and figures such as 1,2,3… will be displayed on the cooler compartment temperature indicator. These figures provide information to the authorized service on the error that has occurred.
- An exclamation mark may be displayed for a while when you load warm food into the freezer compartment or keep the door open for a long time.
- This is not a fault, this warning will be removed when the food is cooled down or when any key is pressed.
Cooler Compartment Off (Vacation)
- Function Key
- Press the key for 3 seconds to activate the vacation function. Vacation mode is activated and the LED on the key is illuminated. “- -” will be displayed on the Cooler Compartment temperature indicator and the cooler compartment does not actively perform cooling. You should not keep your food in the cooler compartment if you activate this function. The other compartments continue to cool according to the temperatures set before. Press the key for 3 seconds again to cancel this function.

Using The Product

Read the “Safety Instructions” section first!

Storing Food in the Freezer and Cooler Compartment

Storing food in the freezer compartment

You can activate the Quick Freezing function 4-6 hours before the freezing function and perform faster cooling.
Bring hot meals to room temperature before placing them in the freezer compartment.
Foods to be frozen must be divided into portions according to the size to be consumed, and frozen in separate packages.
It is recommended to pack the foods before placing them in the freezer.
To prevent the expiration of storage time, write the freezing date, time, and name of the product on the package according to the storage times of different foods.
Consume the foods you have defrosted quickly. Defrosted foods cannot be frozen again unless they are cooked. It is not safe to consume refrozen fresh foods without cooking them after they are defrosted.
As you freeze fresh foods, do not bring them in contact with already frozen foods. Otherwise, frozen foods will be defrosted.

Storing the foods, which are sold frozen

Always follow the instructions of the producer concerning the time during which you are required to store your food. Do not exceed the time specified in these instructions!
To protect the quality of the food, keep the time interval between purchasing transactions and storing as short as possible.
Buy frozen food which are stored at –18 °C or lower temperatures.
Avoid buying foods whose packages are covered with ice etc. This means that the product could be partially defrosted and refrozen.
Temperature impacts the quality of the food.
Do not exceed the storing time recommended by the food producer. Remove only the food as much as you need from the freezer.
Except in the cases where extreme circumstances are available in the environment if your product (on the recommended set values table) is set to the specified set values, the food keeps its freshness for a longer time both in the fresh product compartment and freezer compartment.
If the fresh food compartment is set to a lower temperature, fresh fruits and vegetables may be partially frozen.

Recommended set values table Quick freezing

Activate the quick freezing function 24 hours before placing your fresh foods.
24 hours after pressing the button, place the food that you want to freeze on the first shelf with higher freezing capacity.
The quick freezing function will be automatically deactivated after 48 hours.

Freezer details

As per the IEC 62552 standards, the freezer must have the capacity to freeze 4,5 kg of food items at -18°C or lower temperatures at 25°C room temperature in 24 hours for every 100 liters of freezer compartment volume.
Food products can only be preserved for extended periods at or below temperature of -18 °C.
You can keep the foods fresh for months (in a freezer at or below temperatures of -18 °C).
The food products to be frozen must not contact the already-frozen food inside to avoid partial defrosting.
Boil the vegetables and filter the water to extend the frozen storage time. Place the food in air-tight packages after filtering and place in the freezer. Bananas, tomatoes, lettuce, celery, boiled eggs, potatoes, and similar food items should not be frozen.
In case these foods are frozen, only Nutritional values and eating qualities will be negatively affected. A rotting that would threaten human health is not in question.

Placing the food

Freezer compartment shelves: Different frozen foods like meat, fish, ice cream, vegetables, etc.
Cooler compartment shelves: Food items inside pots, capped plates,s and capped cases, eggs (in closed case)
Cooler compartment door shelves: Small and packaged food or beverages
Crisper: Vegetables and fruits
Fresh food compartment: Delicatessen (breakfast food, meat products to be consumed in a short time)

Storing food in the cooler compartment

Compartment temperatures rise prominently if the compartment door is opened and closed frequently and kept open for a long time, this can reduce the life span of the food and cause the food to spoil.
In order not to cause odor and taste changes, the food should be stored in closed containers.
Do not store too much food in your refrigerator.
To achieve better and homogeneous cooling, place the food separately in a way that cold air can wander through them.
Provide airflow by leaving a space between the food and the internal wall. If you lean the food against the rear wall, the food may freeze.
Bring cooked hot meals to room temperature before placing them in the refrigerator.
Then, you can place the tepid meal on the lower shelves of your refrigerator.
Do not place the tepid meals close to the foods that may easily spoil.
Defrost your frozen food in the fresh food compartment. Thereby, you can cool fresh food compartments by using frozen food and save energy.
Storing unripe tropical fruits (mango, melon varieties, papaya, banana, pineapple) in the refrigerator may speed up the ripening process. This is not recommended because it will cause shorter storage time.
You should store onions, garlic, gingers, and other root vegetables in dark and cold room conditions, not in the refrigerator.
If you notice that food has spoiled in the refrigerator, throw away that food and clean the accessories that have come into contact with it.
To cool meals like soups and stews, which are cooked in large pots, quickly, you can put them in the refrigerator by separating them into shallow containers.
Do not place unpackaged food close to eggs.
Keep the fruits and vegetables separately and store each variety together (for example; apples with apples, carrots with carrots).
Take green vegetables out of the plastic bag and place them in the refrigerator after wrapping them in a paper towel or drying cloth. If you wash this type of food before placing it in the refrigerator, remember to dry it.
You can both create a damp environment and provide an airflow by keeping fruits and vegetables, which are prone to drying, in perforated or unsealed plastic bags.
Except in the cases where extreme circumstances are available in the environment if your product (on the recommended set values table) is set to the specified set values, the food keeps its freshness for a longer time both in the fresh product compartment and freezer compartment.
Store different food in different places according to their properties.

Food| Location| |
---|---|---|---
Egg| Door Shelf|
|
Dairy products (butter, cheese)| If available, zero degree (for breakfast food) compartment|
**** Fruits, vegetables, and greenery| Fruit-vegetable compartment, crisper or EverFresh+ compartment (if available)|
Fresh meat, poultry, fish, sausage, etc. Cooked foods| If available, zero degree (for breakfast food) compartment|
Ready-to-serve foods, packaged products, canned foods, and pickles| Top shelves or door shelf|
Beverages, bottles, spices and snacks| Door Shelf|

Replacing the Illumination Lamp

Call the Authorized Service when the Bulb/ LED used for lighting in your refrigerator will be replaced.
The lamp (s) used in this appliance cannot be used for house lighting. The intended use of this lamp is to help the user place food into the refrigerator/freezer safely and comfortably.

Door Open Alert

The door open alert system of your refrigerator may differ depending on the model.

Version 1;

If the door of the product remains open for a certain time (between 60 s and 120 s), an audio warning signal sounds; depending on the product model, a visual warning signal (light flash) can also be displayed. If you close the door of the device or press a button on the screen of the device, if any, the warning sound will stop.

Version 2;

If the door of the device remains open for a certain time (between 60 s and 120 s), the door open alert is sounded. The door open alert is sounded gradually. First, an audible warning starts to sound.
After 4 minutes, if the door is still not closed, a visual warning (lighting flash) is activated.
The door open alert will be delayed for a certain time (between 60 s and 120 s) when any key on the product screen, if any, is pressed. Then the process will start again. When the device door is closed, the door open alert will be canceled.

Reversing the Door Opening the Side

The door opening side of your refrigerator can be reversed according to the place you put it. When you need this, you should call the nearest Authorized Service.

Product Features

Crisper Technologies Blue Light

Fruits and vegetables stored in the crispers that are illuminated with a blue light continue their photosynthesis through the wavelength effect of blue light and thus preserve their vitamin content.

HarvestFresh

Fruits and vegetables stored in crispers illuminated with the HarvestFresh technology preserve their vitamins for a longer time thanks to the blue, green, and red lights and dark cycles, which simulate a day cycle.
When the door of your refrigerator is opened during the dark period of the HarvestFresh technology, your refrigerator shall sense this automatically and illuminate the crisper with one of the blue, green or red lights respectively for your convenience.
After you have closed the door of the refrigerator, the dark period will continue, representing the nighttime in a day cycle.

The ice storage area Ice Container

Ice bucket allows you to take ice easily from the refrigerator.

Using the ice bucket

Take the ice bucket out of the freezer compartment.
Fill the ice bucket with water.
Place the ice bucket into the freezer compartment. The ice will be ready after approximately two hours.
Take the ice bucket from the freezer compartment and bend it slightly over the holder that you are going to serve Ice will easily pour into the serving holder.

Egg holder

You can place the egg holder on the door or body shelf you wish.
If the egg holder is to be placed on the body shelf, we recommend you to choose colder lower shelves.
Never place the egg holder on the freezer compartment

Using the Water Dispenser

The first few glasses of water taken from the fountain will normally be warm.
If you have not used the water dispenser for a long time, dispose of the first few glasses of water to get clean water.

Press on the arm of the water dispenser with your glass. It would be easier to press on the arm with your hand if you are using a soft plastic glass.
Release the arm after filling your glass with water as you desire.

The amount of water flowing from the fountain depends on the pressure you apply on the arm. Release the pressure on the arm slightly as the water level in your glass/container is increased to prevent overflow.
Water shall drip if you press the arm slightly; this is normal and it is not a malfunction.

Filling the water tank of the water dispenser

Open the lid of the water tank as shown in the figure. Fill in pure and clean drinking water. Close the lid.

The water reservoir capacity is 3 liters, do not overfill.

Cleaning the water tank

Remove the water-filling reservoir inside the door shelf.
Detach by holding both sides of the door shelf.
Hold both sides of the water tank and remove at a 45° angle.
Remove and clean the water tank lid.

Do not fill the water tank with fruit juice, fizzy beverages, alcoholic beverages, or any other liquids incompatible with use in the water dispenser.
Using such liquids will cause malfunction and irreparable damage to the water dispenser. Using the fountain in this way is not within the scope of warranty.
Certain chemicals and additives in such beverages/liquids may cause material damage to the water tank.
Use clean drinking water only.

NOTICE

Do not wash the components of the water tank and water dispenser in the dishwasher.
Before using the water dispenser in the product, check whether the
Child Lock is active or not. Look at the information in the figures about the Child lock ON/OFF positions to check.
Make sure that the Child lock exactly closes as in the figure when it is turned OFF.

The child lock is on like this.

The child lock is off like this.

Crisper

The refrigerator’s crisper is designed to keep vegetables fresh by preserving their humidity.
For this purpose, the overall cold air circulation is intensified in the crisper.
Keep fruits and vegetables in this compartment.
Keep the green-leaved vegetables and fruits separately to prolong their life.

Dairy Products Cold Storage Area

Cold Storage Drawer

The Cold Storage Drawer can reach lower temperatures in the cooler compartment.
Use this drawer for delicatessen products (salami, sausage, etc.) and dairy products that require colder storage conditions, or for meat, chicken or fish to be consumed quickly.
It is not suitable to store fruits and vegetables in this drawer.

Maintenance and Cleaning

WARNING:

Read the “Safety Instructions” section first.

WARNING:

Unplug the refrigerator before cleaning it.
Do not use sharp or abrasive tools to clean the product. Do not use materials such as household cleaning agents, soap, detergents, gas, gasoline, thinner, alcohol, wax, etc.
The dust shall be removed from the ventilation grill on the rear of the product at least once a year (without opening the cover). Clean the product with a dry cloth.

For products with a Water Dispenser / Ice Maker

If the water in the water tank has waited for 2-3 weeks, it shall be replaced.
The water tank and the components of the water dispenser shall not be washed in dishwashers.
Melt a teaspoonful of carbonate in the water. Moisten a piece of cloth in the water and wring it out. Wipe the device with this cloth and dry it off thoroughly.
Take care to keep water away from the lamp’s cover and other electrical parts.
Clean the door with a damp cloth. Remove door and body racks, as well as all contents within the refrigerator. Remove the door racks by lifting them upwards.
Clean and dry the racks, then attach back in place by sliding from above.
Do not use chlorinated water or cleaning products on the exterior surface and chrome-coated parts of the product.
Chlorine will cause rust on such metallic surfaces.
Do not use sharp and abrasive tools, soap, house cleaning materials, detergents, gas, gasoline, varnish, and similar substances to prevent the deformation of the plastic part and the removal of prints on the part.
Use warm water and a soft cloth for cleaning, and then dry it.

On the products without a No-Frost feature;

Water droplets and icing up to the thickness of a finger may occur on the rear wall of the freezer compartment. Do not clean, and never apply oils or similar materials.
Use a mildly dampened microfiber cloth to clean the external surface of the product. Sponges and other types of cleaning clothes may cause scratches.
To clean all removable components during the cleaning of the interior surface of the product, wash these components with a mild solution consisting of soap, water, and carbonate. Wash and dry thoroughly.
Prevent contact of water with illumination components and the control panel.
Take care to keep water away from the lamp’s cover and other electrical parts.
Clean the door with a damp cloth. Remove all contents to remove the door and body racks. Remove the door racks by lifting them upwards. Clean and dry the shelves, then attach them back in place by sliding from above.
Do not use chlorinated water or cleaning products on the exterior surface and chrome-coated parts of the product.
Chlorine will cause rust on such metallic surfaces.
Do not use sharp and abrasive tools, soap, house cleaning materials, detergents, gas, gasoline, varnish, and similar substances to prevent the deformation of the plastic part and the removal of prints on the part. Use warm water and a soft cloth for cleaning, and then dry it.
On the products without a No-Frost feature, water droplets and ice up to the thickness of a finger may occur on the rear wall of the freezer compartment. Do not clean, and never apply oils or similar materials.
Use a mildly dampened microfiber cloth to clean the external surface of the product. Sponges and other types of cleaning clothes may cause scratches.
To clean all removable components during the cleaning of the interior surface of the product, wash these components with a mild solution consisting of soap, water, and carbonate. Wash and dry thoroughly.
Prevent contact of water with illumination components and the control panel.

CAUTION:

Do not use vinegar, rubbing alcohol, or other alcohol-based cleaning agents on any interior surface.

Stainless Steel External Surfaces

Use a non-abrasive stainless steel cleaning agent and apply it with a soft lint-free cloth.
To polish, gently wipe the surface with a micro-fiber cloth dampened with water and use dry polishing chamois. Always follow the veins of the stainless steel.

Preventing Odours

The product is manufactured free of any odorous materials. However, keeping the food in inappropriate sections and improper cleaning of internal surfaces may lead to odors.
To avoid this, clean the inside with carbonated water every 15 days.
Keep the foods in sealed holders, as micro-organisms arising from foods kept in unsealed containers will cause bad odor.
Do not keep expired and spoilt foods in the refrigerator.

Protecting Plastic Surfaces

Oil spilled on plastic surfaces may damage the surface and must be cleaned immediately with warm water.

Troubleshooting

Check this list before contacting the service.
Doing so will save you time and money.
This list includes frequent complaints that are not related to faulty workmanship or materials.
Certain features mentioned herein may not apply to your product.

The refrigerator is not working

The power plug is not fully settled.
Plug it in to settle completely into the socket.
The fuse connected to the socket powering the product or the main fuse is blown.
Check the fuse.
Condensation on the side wall of the cooler compartment (MULTI-ZONE,
COOL CONTROL and FLEXI ZONE).
The door is opened too frequently. >>>
Take care not to open the product’s door too frequently.
The environment is too humid. >>> Do not install the product in humid environments.
Foods containing liquids are kept in unsealed holders. >>> Keep the foods containing liquids in sealed holders.
The product’s door is left open. >>> Do not keep the product’s door open for long periods.
The thermostat is set to a very cool temperature.
Set the thermostat to an appropriate temperature.

The compressor is not working

In case of sudden power failure or pulling the power plug off and putting it back on, the gas pressure in the product’s cooling system is not balanced, which triggers the compressor thermic safeguard.
The product will restart after approximately 6 minutes. If the product does not restart after this period, contact the service.
Defrosting is active. >>> This is normal for a fully automatic defrosting product.
The defrosting is carried out periodically.
The product is not plugged in. >>> Make sure the power cord is plugged in.
The temperature setting is incorrect. >>>
Select the appropriate temperature setting.
The power is out. >>> The product will continue to operate normally once the power is restored.
The refrigerator’s operating noise is increasing while in use.
The product’s operating performance may vary depending on the ambient temperature variations.
This is normal and not a malfunction.
The refrigerator runs too often or for too long.
The new product may be larger than the previous one. Larger products will run for longer periods.
The room temperature may be high.
The product will normally run for long periods at higher room temperature.
The product may have been recently plugged in or a new food item is placed inside.
The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside. This is normal.
Large quantities of hot food may have been recently placed into the product. Do not place hot food into the product.
The doors were opened frequently or kept open for long periods. >>> The warm air moving inside will cause the product to run longer. Do not open the doors too frequently.
The freezer or cooler door may be ajar. Check that the doors are fully closed.
The product may be set to a temperature that is too low. >>> Set the temperature to a higher degree and wait for the product to reach the adjusted temperature.
The cooler or freezer door washer may be dirty, worn out, broken, or not properly settled. >>> Clean or replace the gasket.
A damaged/torn door washer will cause the product to run for longer periods to preserve the current temperature.

The freezer temperature is very low, but the cooler temperature is adequate

The freezer compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again.

The cooler temperature is very low, but the freezer temperature is adequate

The cooler compartment temperature is set to a very low degree. >>> Set the cooler compartment temperature to a higher degree and check again.

The food items kept in cooler compartment drawers are frozen

The cooler compartment temperature is set to a very low degree. >>> Set the cooler compartment temperature to a higher degree and check again.

The temperature in the cooler or the freezer is too high

The cooler compartment temperature is set to a very high degree. >>> The temperature setting of the cooler compartment has an effect on the temperature in the freezer compartment.
Wait until the temperature of relevant parts reaches a sufficient level by changing the temperature of the cooler or freezer compartments.
The doors were opened frequently or kept open for long periods. >>> Do not open the doors too frequently.
The door may be ajar. >>> Fully close the door.
The product may have been recently plugged in or a new food item is placed inside. >>> This is normal.
The product will take longer to reach the set temperature when recently plugged in or a new food item is placed inside.
Large quantities of hot food may have been recently placed into the product.
Do not place hot food into the product.

Shaking or noise

The surface is not flat or durable >>> If the product is shaking when moved slowly, adjust the stands to balance the product. Also, make sure the ground is sufficiently durable to bear the product.
Any items placed on the product may cause noise. >>> Remove any items placed on the product.
The product is making noise of liquid flowing, spraying, etc.
The product’s operating principles involve liquid and gas flows. >>> This is normal and not a malfunction.

There is a sound of wind blowing coming from the product

The product uses a fan for the cooling process. This is normal and not a malfunction.

There is condensation on the product’s internal walls

Hot or humid weather will increase icing and condensation. This is normal and not a malfunction.
The doors were opened frequently or kept open for long periods. >>> Do not open the doors too frequently; if open, close the door.
The door may be ajar. >>> Fully close the door.

There is condensation on the product’s exterior or between the doors

The ambient weather may be humid, this is quite normal in humid weather. >>>
The condensation will dissipate when the humidity is reduced.

The interior smells bad

The product is not cleaned regularly. >>>
Clean the interior regularly using a sponge, warm water, and carbonated water.
Certain holders and packaging materials may cause odor. >>> Use holders and packaging materials without being free of odor.
The foods were placed in unsealed holders.
Keep the foods in sealed holders.
Microorganisms may spread out of unsealed food items and cause bad odour.
Remove any expired or spoiled foods from the product.

The door is not closing

Food packages may be blocking the door. >>> Relocate any items blocking the doors.
The product is not standing in a fully upright position on the ground. >>> Adjust the stands to balance the product.
The surface is not flat or durable >>>
Make sure the surface is flat and sufficiently durable to bear the product.

The crisper is jammed

The food items may be in contact with the upper section of the drawer. >>> Reorganize the food items in the drawer.

Temperature on the product surface

High temperature may be observed between two doors, on the side panels, and the rear grill area while your product is operated.
This is normal and it does not require servicing.

The fan continues to operate when the door is opened

The fan may continue to operate when the freezer door is open
WARNING: If the problem persists after following the instructions in this section, contact your vendor or an Authorized Service. Do not try to repair the product. This is normal.

Packaging sorting information

Please scan the QR code which is placed on the outer packaging of the product to find all the information relating to the packaging and how to manage packaging waste.

DISCLAIMER / WARNING

Some (simple) failures can be adequately handled by the end-user without any safety issue or unsafe use arising, provided that they are carried out within the limits and under the following instructions (see the “Self-Repair” section).
Therefore, unless otherwise authorized in the “Self-Repair” section below, repairs shall be addressed to registered professional repairers to avoid safety issues.
A registered Professional repairer is a professional repairer who has been granted access to the instructions and spare parts list of this product by the manufacturer according to the methods described in legislative acts under Directive 2009/125/ EC.
However, only the service agent (authorized professional repairers) that you can reach through the phone number given in the user manual/warranty card or through your authorized dealer may provide service under the guarantee terms. Therefore, please be advised that repairs by professional repairers (who are not authorized by) Beko shall void the guarantee.

Self-Repair

Self-repair can be done by the end-user about the following spare parts: door handles, door hinges, trays, baskets, and door gaskets (an updated list is also available on support.beko.com as of 1st March 2021).
Moreover, to ensure product safety and to prevent the risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair which are available on support.beko.com. For your safety, unplug the product before attempting any self-repair.
Repair and repair attempts by end-users for parts not included in such list and/or not following the instructions in the user manuals for self-repair or which are available in support.beko.com might give rise to safety issues not attributable to Beko and will void the warranty of the product.
Therefore, it is highly recommended that end-users refrain from attempting to carry out repairs falling outside the mentioned list of spare parts, contacting in such cases authorized professional repairers or registered professional repairers.
On the contrary, such attempts by end-users may cause safety issues to damage the product and subsequently cause fire, flood, electrocution, and serious personal injury to occur.
By way of example, but not limited to, the following repairs must be addressed to authorized professional repairers or registered professional repairers: compressor, cooling circuit, main board, inverter board, display board, etc.
The manufacturer/seller cannot be held liable in any case where end-users do not comply with the above.
The spare part availability of the refrigerator that you purchased is 10 years. During this period, original spare parts will be available to operate the refrigerator properly
The minimum duration of guarantee of the refrigerator that you purchased is 24 months.
This product is equipped with a lighting source of the “G” energy class.
The lighting source in this product shall only be replaced by a Professional repairer.