AS200 Airspark Air Purifiers for Home Large Room User Manual

June 17, 2024
Airspark

Airspark - logo

H13 True HEPA Air Purifier
User Manual
Model: AS200

AS200 Airspark Air Purifiers for Home Large Room-

Welcome to clean air with Airspark. Enjoy your health and wellness journey with Airspark air purifier.

Package Contents

1 x Airspark AS200 Air Purifier
1 x 4-Stage HEPA Filter (Pre-Installed)
1 x User Manual

Specifications

Rated Power 36W
CADR 110+CFM / 187+ m³/h
Noise Level 23-52dB
Power Supply AC 120V, 60Hz
Air Purifier Weight 6.6lb / 3kg
Air Purifier Dimensions 7.9×7.9×16.9 in 20x20x43 cm
Operating Conditions Temperature: 14°F–104°F / -10°C–40°C Humidity: < 85% RH

Getting Started

  1. Remove the plastic bag from the filter
    1.1. Flip the air purifier over. Twist the filter cover counterclockwise and open it.
    (Figure 1.1)
    1.2. Remove the filter from its plastic packaging. (Figure 1.2)

  2. Re-attach the filter
    2.1. Secure the filter on the filter cover. (Figure 2.1)
    2.2. Place the filter back into the purifier. Twist clockwise to lock. (Figure 2.2)

AS200 Airspark Air Purifiers for Home Large Room- Getting
Started

General Safety Information

  • Only use your air purifier as described in this manual.
  • Do not touch the plug with wet hands.
  • Do not use without removing the plastic wrap from the filter. The purifier will not filter air, and may overheat, causing a fire hazard.
  • Do not wash or use filter repeatedly.
  • Do not place anything into any opening on the air purifier.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge.
  • Children should be supervised to ensure that they do not play with the appliance.
  • If the supply cord is damaged, it must be replaced by the manufacturer.
  • Do not place it close or on the top of a heating object (such as a fireplace, a heater, or places with possible inflammable glass)
  • Do not expose the purifier to extremes of temperature, humid areas or outdoors.
  • Do not sit or place heavy objects on the air purifier.
  • Do not use your air purifier if it is damaged or not working correctly, or if the cord or plug is damaged, or wall socket is loose. Do not try to repair it yourself.
  • Never place the cord near any heat source.
  • Please unplug the purifier in case of cleaning or storage. Or low insulation may cause electric shock or fire due to short circuit.
  • Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners.

Getting to Know Your Air Purifier

AS200 Airspark Air Purifiers for Home Large Room- Power
On

  1. Power On/Off Button
  2.  Fan Speed Indicators
  3. Fan Speed Adjust
  4.  Sleep/LED Light Button
  5. Timer Indicators.
  6. Timer Button
  7. Check Filter Indicator
  8.  Air Outlet
  9. LED Light
  10. Housing
  11.  360° Air Inlet

Operation of Buttons

On/Off Button
Tap to turn the air purifier on/off.
Fan Speed Button
Tap to Cyclely change fan speeds: 1 (low) to 4 (high).
Sleep Mode/Led Light Button
Tap once to turn off LED Light.
Tap a second time to Sleep Mode.
Sleep Mode Note:
• All lights will be turned off except at half brightness.
• Sleep Mode operates quietly by using the lowest fan speed.
• Tapping any button will exit Sleep Mode.
Timer Button
Tap Cyclely change timer options: 2/4/8/12 hours.
Check Filter Indicator
Glow red when the filter should be checked.
Press and hold for 3 seconds to reset.

About the Filter

AS200 Airspark Air Purifiers for Home Large Room- About the
Filter

  1. Activated Carbon Filter
    Physically absorbs various odors, such as pet odors, VOCs, smoke, cooking smell, and fumes.

  2.  H13 True HEPA Filter
    Captures 99.97% of 0.3-micron particles, such as smoke,, pollen, pet dander and other airborne particles.

  3. Enhanced Pollen & Pet Filter
    Helps to relieve coughing, sneezing, chronic symptoms caused by pet hair, pet dander and pollens.

  4. Pre-Filter
    Captures large particles such as dust, fibers, hair, and pet fur.

Clean the Air Purifier and Filter

  • Before cleaning, the appliance must be disconnected from the supply mains.
  • The outer pre-filter should be cleaned every 2–4 weeks to increase the efficiency and extend the life of your filter.
  • Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles (Figure 3.1).
  • Do not clean the filter with water or other liquids.
  • Clean the air inlet and outlet with a soft brush (every 1-2 months)
  • Clean the product body with dry, soft cloth (every 2~4 weeks) (Figure 3.2)
  • If your Air Purifier will not be used for more than 30 days, we recommend that you: wrap the air purifier and the filter in packaging and storing in a dry place.

AS200 Airspark Air Purifiers for Home Large Room-
filter

When Should I Replace the Air Purifier Filter?

  • The filter should be replaced every 4–6 months. You will need to replace your filter which depends on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution will need to replace the filter more often, even if is off.
  • will glow red as a reminder to check or replace the air filter. The indicator should turn on within 3–6 months
  • You may also need to replace your filter if you notice:
  • Increased noise when the air purifier is on.
  • Decreased airflow.
  • Unusual odors.
  •  A visibly clogged filter.
    Note: Remember to reset after changing the filter.

Replacing the Air Purifier Filter

  1. Unplug the air purifier. Flip the air purifier over and remove the filter cover (see Getting Started).
  2. Remove the old filter.
  3. Clean out any remaining dust or hair inside the purifier using a vacuum hose. Do not use water or liquids to clean the purifier or filter (Figure 3.2).
  4. Unwrap the new filter and place it into the housing. (see Getting Started).
  5.  Replace the cover. Plug in the air purifier.
  6.  Press and hold the button for 3 seconds, lights will turn off when successfully reset.

Resetting the Check Filter Indicator
A. Reset the Check Filter Indicator when glow red.

  1. Replace the air purifier filter.
  2. Turn on the air purifier.
  3. Press and hold for 3 seconds will turn off when successfully reset.

B. Reset before lights up.

  1.  Press and hold for 3 seconds, lights will glow red.
  2. Press and hold again for 3 seconds, lights will turn off when successfully reset.

Warranty Information

Product Name: Airspark H13 True HEPA Air Purifier
Model: AS200
Terms & Policy

  • Airspark Corporation warrants all products to be of the highest quality, service and warranty for 2 years, effective from the date of purchase to the end of the warranty period. Warranty lengths may vary between different product categories.
  • If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.

Airspark - logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals