saiyo SY-BT1632 Wireless Headphones Instruction Manual

saiyo SY-BT1632 Wireless Headphones

Product Information

Specifications:

• Model: SY-BT1632
• Wireless Headphones

Product Usage Instructions

Charging:
To ensure optimal performance, it is recommended to fully charge the wireless headphones before first use.

1. Connect the provided charging cable to the headphones.
2. Plug the other end of the charging cable into a power source.
3. The LED indicator will turn red to indicate charging.
4. Once fully charged, the LED indicator will turn green.

Pairing:
Before using the wireless headphones with a device, they need to be paired via Bluetooth.

1. Turn on the Bluetooth function on your device.
2. Press and hold the power button on the headphones until the LED indicator starts flashing blue and red.
3. Select “SY-BT1632” from the list of available Bluetooth devices on your device.
4. Once paired, the LED indicator will turn solid blue.

Controlling Playback:
The wireless headphones offer various controls for playback.

• To play or pause music, press the play/pause button once.
• To skip to the next track, press the next track button.
• To go back to the previous track, press the previous track button.
• To adjust the volume, use the volume up and volume down buttons.

Answering Calls:
The wireless headphones allow you to answer calls hands-free.

1. When a call comes in, press the answer/hang up button to answer the call.
2. To end the call, press the answer/hang up button again.

Power Off:
To conserve battery life, it is recommended to power off the wireless headphones when not in use.

1. Press and hold the power button until the LED indicator turns off.

Frequently Asked Questions (FAQ)

• Q: How long does it take to fully charge the headphones?
  A: The charging time may vary, but it typically takes around 2 hours to fully charge the headphones.

• Q: Can I use the headphones while they are charging?
  A: Yes, you can use the headphones while they are charging. However, please note that the charging time may be longer.

• Q: Can I connect the headphones to multiple devices simultaneously?
  A: No, the headphones can only be connected to one device at a time. To connect to a different device, you need to disconnect from the current device first.

• Q: How do I reset the headphones?
  A: To reset the headphones, press and hold the power button for 10 seconds until the LED indicator flashes red and blue.

We are very glad that you purchase our wireless headphones! We Hope it brings you fun and enjoy

Headphones Overview

1. LED indicator
2. Audio port
3. Type-C charging port
4. Microphone
5. TF card interface
6. Play/Pause/Off/On
7. Next song/volume up
8. Previous song/volume down
9. Mode switch button

FEATURED

• Wireless version: BT V5.3
• Supported protocols: A2DP, AVRCP, HSP, HFP
• Transmission range: 10 meters
• Frequency response: 20Hz~20000Hz
• Charging voltage: DC 5V
• Charging time: about 2 hours
• Talk/music time: about 40 hours
• Standby time: more than 200 hours
• Product net weight: 193g

How to use

1. Press and hold the power button for 3 seconds until the red and blue LED lights flash alternately.
2. Activate the BT function of the mobile device.
3. Search for ” SY-BT1632″.

Headphones Controls

Warning

1. Do not expose the product to high temperatures, and corrosive or high-pressure environments.
2. Do not attempt to disassemble the headphones, or to replace any electronic components in it.
3. If the internal devices have fluid leakage, please stop use.
4. Do not expose the battery (battery or combined battery) to excessive heat such as sunlight, fire or similar.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>