AKK ALPHA Series 10000mW 80ch Video Transmitter Instruction Manual
- August 5, 2024
- AKK
Table of Contents
AKK ALPHA Series 10000mW 80ch Video Transmitter Instruction Manual
PRODUCT SPECIFICATION
Please mount the VTX on the uppennost layer of the drone frame to maintain enough airflow for heat dissipating.
This VTX supports pit mode, you can enter or exit pit mode via Betaflight, or you can exit pit mode by pressing button for 15 seconds. If you do not exit pit mode, the VTX will still be In pit mode next time It Is powered on.
Channel
Select channels 1/2/3/4/5/617/8 by simple short presses.
Band
Press button for 3 seconds until the English letter flashes in LED, then short
press to select band Nb/E/F/r/P/UU/O/X.
Power
Press button for 6 seconds until the number quick flashes in LEO, then short
press to select power.
The LED will display “band” “channel” “power” successively after setting.
Notice: LED flashes a number 2 times quickly while displaying power. For
example:
For the Alpha 4, “1” flashes 2 times means “1W”.
For the Alpha 10, “5” flashes 2 times means “10W’