BRESSER MeteoTemp Weather Station Instruction Manual

RESSER MeteoTemp Weather Station

Product Information

Specifications

• Product Name : MeteoTemp
• Manufacturer: Bresser GmbH
• Address : Gutenbergstr. 2, 46414 Rhede, Germany
• Website: http://www.bresser.de/P7004200
• Warranty Terms : http://www.bresser.de/warranty_terms

Product Usage Instructions

1. Imprint
   Bresser GmbH Gutenbergstr. 2, 46414 Rhede, Germany Website: http://www.bresser.de

2. Validity Note
   This documentation is valid for the products with the following article numbers: 7004200, 7004200000000

3. Manual version: 1223

4. Manual designation:
   Manual_7004200000000_MeteoTemp_ende_BRESSER_v122023a

5. About this Instruction Manual
   NOTICE: These operating instructions are to be considered a component of the device. Read the safety instructions and the instruction manual carefully before using this device. Keep these instruction manual in a safe place for future reference. If the device is sold or passed on, the instruction manual must be passed on to any subsequent owner/user of the product.

6. General Safety Instructions

   • DANGER: Danger of suffocation!
     Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

   • DANGER: Risk of an electric shock!
     This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.

   • DANGER: Explosion hazard!
     Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.

FAQ

1. Q: Where can I find further information on this product or translations of these instructions?
   A: You can visit our website by scanning the QR code or using the web link provided.

2. Q: What should I do if I have warranty claims or service inquiries?
   A: Please refer to the information on Warranty and Service in this documentation for any warranty claims or service inquiries.

3. Q: Can I return the product without prior contact?
   A: No, unsolicited returns cannot be processed. Please contact us for any warranty claims or service inquiries.

4. Q: Can I reproduce or distribute this documentation?
   A: No, the reproduction and distribution of this documentation without prior written permission from the manufacturer is prohibited.

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions

• www.bresser.de/P7004200
• www.bresser.de/P7004200000000

WARRANTY

www.bresser.de/warranty_terms

RECYCLAGE

Imprint

• Bresser GmbH
• Gutenbergstr. 2
• 46414 Rhede
• Germany
• www.bresser.de
• For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this documentation. We ask for your understanding that unsolicited returns cannot be processed.
• Errors and technical changes excepted.
• © 2023 Bresser GmbH
• All rights reserved.
• The reproduction of this documentation – even in extracts -in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited.
• The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark and/or patent law in Germany, the
• European Union and/or other countries.

Validity note

• This documentation is valid for the products with the follow-ing article numbers:
• 7004200 7004200000000
• Manual version : 1223
• Manual designation :
• Manual_7004200000000_MeteoTemp_en-
• de_BRESSER_v122023a
• Always provide information when requesting service.

About this Instruction Manual

NOTICE

• These operating instructions are to be considered a component of the device.
• Read the safety instructions and the instruction manual carefully before using this device.
• Keep these instruction manual in a safe place for future reference. If the device is sold or passed on, the instruction manual must be passed on to any subsequent owner/user of the product.

General safety instructions

• DANGER
• Danger of suffocation!
  • Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you ob-serve the following safety information.
  • Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
  • This product contains small parts that can be swallowed by children! Choking hazard!
• DANGER
  • Risk of an electric shock!
  • This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can  cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.
  • Never leave children unattended when handling the device! Follow the instructions carefully and do not at-tempt to power this device with anything other than power sources recommended in this instruction manual, otherwise there is a danger of an electric shock!
• DANGER Explosion hazard!
  • Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.
  • Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire! Ex-cessive heat or improper handling could trigger a short-circuit, a fire or an explosion!
• NOTICE
  • Danger of material damage!
• Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.
  • Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for re-pair if necessary.
  • Do not immerse the unit in water!
  • Do not expose the device to impacts, vibrations, dust, constant high temperatures or excessive humidity. This can result in malfunctions, short-circuits or damage to the batteries and components.
  • Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from dif-ferent brands or types or with different capacities. Remove batteries from the device if it is not to be used for a longer period of time!
• NOTICE
  Risk of voltage damage!
  The manufacturer is not liable for damage related to im-properly installed batteries!

Parts overview and scope of delivery

Illustration 1: Parts overview for base station (top) and remote sensor (bottom)

1. Display (Base station)
2. Wall mount figure
3. [DOWN] button (Value setting downwards)
4. [UP] button (Value setting up-wards)
5. [SYNC] button
6. [SET] button (Settings or display change between °C or °F)
7. Battery compartment
8. Battery compartment cover
9. Stand, fold-out
10. Display
11. Function indicator
12. Wall mount fixture
13. Channel selector switch1
14. [°C/°F] button
15. Battery compartment cover
16. Battery compartment

Scope of delivery

• Base unit (A), wireless sensor (B)
• Also required (not included):
• 2 pcs Mignon batteries (1.5V, AAA/LR03 type) (station)
• 2 pcs. Mignon batteries (1.5V, AAA/LR03 type) (sensor)
• 1This weather station is designed for operation with only one sensor! The channel selector switch must therefore al-ways be in the ‘1’ position.

Screen display

Illustration 2 : Screen display for the base station

1. Time
2. Symbol for active daylight saving time (DST)
3. Weather trend arrow
4. Graphical 12-24 hours weather trend display
5. Signal reception symbol (remote sensor)
6. Temperature range symbol (re-mote sensor)
7. Outdoor temperature value (re-mote sensor)
8. Battery level indicator (remote sensor)
9. Temperature range symbol (base station)
10. Indoor temperature value (base station)
11. Battery level indicator (base station)
12. Time signal transmission symbol
13. Day and Month
14. Ice pre-alert

Setting up power supply

Base unit

1. Remove the battery compartment cover.
2. Insert batteries into the battery compartment. Make sure that the batteries are correctly aligned (+/- poles).
3. Replace the battery compartment cover.

Wireless sensor

1. Remove the battery compartment cover.
2. Insert batteries into the battery compartment. Make sure that the batteries are correctly aligned (+/- poles).
3. Replace the battery compartment cover.
   NOTICE! This weather station is designed for operation with only one sensor! The channel selector switch must therefore always be in the ‘1’ position.

Automatic time setting

• After the power supply was established, the clock will automatically search for the radio signal. This will take approximately 3 to 8 minutes to finish this process.
• If the radio signal is received correctly, the date and time will be set automatically and the radio control signal icon turns on.

If the clock fails to receive the time signal, go ahead with the following steps:

1. Press and hold the UP button for 2 seconds to re-initialize RC signal receiving.
2. Is the device still not receiving the signal, the time must be set manually.

Manual time setting

1. Press the SET button for approx. 3 seconds to enter the time setting mode.
2. Digits to be set are flashing.
3. Press UP or DOWN button to change the value.
4. Press the SET button to confirm and switch to the next setting.
5. Order of settings: Time zone (-12 to +12 hours) > Year > Month > Day > Month (M) and Day (D)/Day (D) and Month (M) > 12/24 hour mode > Hours > Minutes
6. Finally, press the SET button to save the settings and exit setting mode.

Time zone setting
The time zone is set as part of the manual time setting. Further information can also be found in the chapter “Manual Time Adjustment”.

1. Press the SET button for approx. 3 seconds to enter the time setting mode.
2. Possibly press the SET button several times until the display shows the setting for the time zone (the factory setting is ’00’).
3. Press UP or DOWN button to select the desired time deviation in hours (-12 to +12 hours).
4. Finally, press SET button for approx. 3 seconds to con-firm the set time deviation.

Receiving measurements automatically
Once batteries are installed, the base station will display the measurement readings. Readings from the remote sensor will be displayed within 3 minutes after powering it on.
If no signal will be received, then go ahead with the following steps:

1. Press SYNC button for approx. 2 seconds to re-initiate reception of measurements again.
2. If the device is still not receiving the signal: Press and hold the DOWN button for approx. 2 seconds to initiate reception of measurements again.

Weather trend
The weather station will calculate a weather trend for the next 12-24 hours on basis of the measured values.

1. Sunny
2. Partly cloudy
3. Cloudy
4. Rain
5. Snow

Trend arrow indicators

1. Rising
2. Stable
3. Falling

• The temperature trend indicator shows the trends of weather change for the coming minutes. Arrows indicate a rising, stable or falling trend.
• The barometer measures the air pressure every 15 minutes. Based on this measurement, the main unit calculates the air pressure for the current hour (the average air pressure of now / 15 minutes ago / 30 minutes ago / as well as 45 minutes ago) and compares this value with the value of the previous hour. If the measured air pressure has changed by more than 1 hPa, an increasing (UP) or decreasing (DOWN) trend arrow is displayed.

Ice pre-alert

1. When the outdoor temperature hits 3° C (37 ° F), the ice pre-alert symbol will appear on the display, flashing continuously.
2. The ice pre-alert symbol   will disappear as soon as the temperature rises above 3° C.

Disposal

• Dispose of the packaging materials according to its type. Information on proper disposal can be obtained from the municipal waste disposal service provider or environmental agency.

• Do not dispose of electronic devices in the household garbage!
  According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner.

• Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can return them after use either at our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge.

• Batteries and accumulators are marked with a crossed-out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

Technical data

Base unit

• Batteries 2x AAA, 1.5 V
• Radio controlled signal DCF
• Maximum number of sensors 1
• Temperature unit °C/°F
• Temperature measuring range -5°C to 50°C (23°F to 122°F)
• Time display HH:MM
• Time format 12 or 24 hours
• Calendar display DD / MM or MM / DD
• Dimensions 82 x 157 x 20 mm (W x H x D)
• Weight 154 g (without batteries)

Wireless sensor

• Batteries 2x AAA, 1.5 V
• Transmission frequency 433 MHz
• Maximum radio-frequency power below 0.1mW
• Temperature unit °C/°F
• Temperature measuring range -40°C to 70°C
• Dimensions 65x71x23mm (W x H x D)
• Weight 48 g (without batteries)

Warranty

• The regular warranty period is 2 years and starts on the day of purchase. To benefit from an extended voluntary warranty period as indicated on the gift box, registration on our website is required.
• You can consult the full guarantee terms as well as information on extending the guarantee period and details of our services at www.bresser.de.warranty.terms

CE declaration of conformity

Bresser GmbH hereby declares that the radio equipment type with item number 7004200 7004200000000 is in compliance with Directive 2014/53/EU. The full text of the CE Declaration of Conformity is available at the following web address: www.bresser.de.download.7004200.CE.70004200.CE.pdf

References

• disponibles.IT
• konsoleH :: Login
• Bresser | Startseite | Expand Your Horizon mit BRESSER
• index · powered by h5ai 0.26.1 (http://larsjung.de/h5ai/)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>