ISAKE T6 Translator Smart Speech User Manual
- June 17, 2024
- ISAKE
Table of Contents
User Manual
T6 Translator Smart Speech
http://record.szaicy.com/resource/app_download/translator_app.html|
http://record.szaicy.com/resource/app_download/translator_app.html
---|---
Android User
Scan the above qr code on your android phone or search “ATranslator” in the
Google store.
Download the Android application and use it with the translator| Apple iOS
User
An apple phone can scan the qr code or download the app “ATranslator” from the
apple store and use it with a translator
Be Careful
- Translator must be connected to Bluetooth of smartphone.
- The ATranslator application needs to be installed on the mobile phone
- Ensure that the mobile network is in a normal state (recommend mobile 4G network)
- long press the power button of the translator for 2 seconds, and the volume can be adjusted by the buttons of the mobile phone and the translator.
FCC Statement
Note: This equpment has been tested and found to comply wth the lmits for
a Class B digital device, pursuant to part 15 of the FCC Rues. These lmits are
designed to provide reasonabe protection against harmful interference in a
residential instalation. Ths equipment generates, uses and can radate radio
frequency energy and, if not installed and used in accordance wth the
instructions, may cause harmfu interference to rado communications. However,
there is no guarantee that interference w not occur in a particular
instalation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turnng the equpment off and
on, the user is encouraged to try to correct the interference by one or more
of the foowing measures:
- Reorent or relocate the receivng antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circut different from that to which the recever is connected.
- Consult the dealer or an experenced rado/TV technician for help.
This devce complies with part 15 of the FCC Rules. Operation is subect to the
following two conditions:(1) Ths devce may not cause harmful interference, and
(2) ths devce must accept any interference received, includng interference
that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsibe
for compliance coud void the users authorty to operate the equpment.
The device has evaluated to meet general RF exposure requirement. The device
can be used be in portabe exposure wthout restrction.
- Open the ATranslator APP and click on the “Dialogue Translation” option in the middle of the interface to enter the Bluetooth connection page.
Search for the Bluetooth name (AI Translator), click to connect, and press the
back key to return to the main interface after successful connection
(only when the indicator light is green, can it be used normally; If the
indicator light shows white, restart and reconnect the translator and APP to
ensure the normal connection of the phone)
How to set the language
- Click on the language logo at the top of the screen in the main translation interface.
- Select the language you want to translate in the pop-up language list.
Voise Translation
- In the translation interface of APP, the left language corresponds to the “A” key of the translator and the right language corresponds to the “B” key of the translator.
- In order to accurately translate, press the A or B button of the translator and wait for 1 second to start talking (Apple mobile phone needs to press and hold the button for 2 seconds before speaking)
- Release the button after speaking (don’t speak too fast, try to speak clearly and within 60 seconds)
- The translator will translate the speech recognition into text and translate it into the required language for sound playback (if the network is not good, the playback time will be prolonged).
When using the translator, please make sure that the translation interface on
the APP is always open on the IOS phone, otherwise the translation cannot be
performed normally.
ANDROID mobile phone can open or not open the translation interface, can
translate (APP process needs to run in the background, can not close).
Text translation：
At the top of the text translation interface, select the language to be
translated, click the blank space in the upper part to directly enter the
content to be translated, click the “translation” button on the right, and the
translation result will be displayed in the lower part.
Photo translation.
Set the language to be translated in the APP interface and click to take a
photo.
Indicator light specification/product specification
| Red light constantly | Charging |
|---|---|
| Yellow light constantly | Charge Complete |
| Blue light flashing | Bluetooth ready to pair |
| White light constantly | Bluetooth connected |
| Green light constantly | Translator is connected to Wooask application |
| Bluetooth version | BT4.2 |
| Battery | 850mA.h |
| Speaker | 801W |
| Duration | 8m |
Frequently asked questions:
1. The device cannot be turned on
Make sure your device is fully charged or recharged or press the power button for 8 seconds to reset.
2. The application is not connected to the device?
Please make sure that the translator is not connected to other phones. If so, please disconnect and reconnect to the new phone.If no other phone is connected, please unpair or unsave the paired bluetooth device in the bluetooth setting of the phone and reconnect.
3. Why can't I hear any sound?
You may need to turn up the speaker volume or make sure the device is connected to your phone.
4.Unable to find bluetooth or unable to translate after connecting to bluetooth.
Restart your phone and translator and reconnect.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>