Shenzhen Global Development Electronic SW-12A Wireless Game Controller User Manual
- June 6, 2024
- Shenzhen Global Development Electronic
Table of Contents
Shenzhen Global Development Electronic SW-12A Wireless Game Controller
Switch Controller Button Description
Mode and
Connection Instructions
Bluetooth Switch Mode
- Turn on the Switch system, press the System settings menu button on the Main Page interface, after entering the next menu option, press the Airplane Mode option, and then press the Controller Connection (Bluetooth) option to turn ON the Bluetooth function.
- Enter the Switch system Controller Bluetooth pairing mode, press the Controller menu button on the system Main Page interface, after entering the next menu option, press Change Grip/Order option, the system will search for the pairing Controller automatically.
Press and Hold the Pairing Button / Reset Button for 3 seconds, or press the
Controller Y + HOME first for 2 seconds (Note: do not release the Y Button) to
enter the Bluetooth Mode, LED1-LED4 Scrolling Light flashes, when the
connection is successful. The Switch system automatically assigns the
corresponding channel indicator of the Controller to be constantly ON. In the
Synchronization state or pairing with the system connection: LED1-LED4
Scrolling Light flashes.
Note: After the Controller enters Pairing Mode, it will be in sleep mode automatically without synchronization within 3.5 minutes; long press the Pairing Button for 3 seconds to enter the Pairing Mode, short press is the Reset function, when the Controller function is out of order or crashes, short press this Button to reset the Controller.
- Bluetooth Android Mode: Press A + HOME for 2 seconds to enter the Bluetooth Search Mode, LED2+LED3 flash quickly during pairing, and the LED2+LED3 indicators light up when the connection is successful.
- 2.4G D-INPUT Mode: Press “-” Button + HOME for 2 seconds to enter the 2.4G Search Mode, LED2+LED3 flash quickly during pairing, and the LED2+LED3 indicators light up when the connection is successful.
- 2.4G X-INPUT Mode: Press “+” Button + HOME for 2 seconds to enter the 2.4G Search Mode, LED1+LED4 flash quickly during pairing, and the LED1+LED4 indicators light up when the connection is successful.
- 2.4G Android Mode: Press “-” + HOME Button for 2 seconds to enter the 2.4G Search Mode, LED2+LED3 flash quickly during pairing, and the LED2+LED3 are constantly ON when the connection is successful.
- 2.4G PS3 Mode: Press L Button + HOME for 2 seconds to enter the 2.4G Search Mode, 4 LED indicators flash quickly at the same time, and the successful connection is indicated by the system assigned channel indicator.
- Remark: 2.4G Dongle receiver is optional and not a standard accessory!
- Connect-back Mode: Press the HOME Button for 1 second to wake up the Controller, and it will automatically connect to the paired system after waking up. If the connect-back is not successful in 10 seconds, it will sleep automatically. Pressing other Buttons does not have a wake-up function.
- Charging Indication: When the Controller is turned off, the LED1-LED4 mode indicator lights flash slowly while charging, and the LED is OFF when fully charged. Low Battery Voltage Alarm: The current mode indicator flashes (flashing quickly); the current mode indicator flashes (flashing slowly) while charging, the current mode indicator is constantly ON when fully charged; when pairing, reconnecting, charging or low battery, the pairing and reconnection LED indicator has priority.
- Automatic Sleep / Controller On and OFF: The System Screen is OFF, Controller Automatic Sleep; if there is not any button pressing action within 5 minutes, it will sleep automatically (including Sensor action). In Bluetooth Mode, press the HOME Button for 5 seconds to turn off and disconnect from the system; short pressing the Pairing Button can turn off the Controller directly; short press the HOME Button for 1 second to wake up the Controller.
- Low voltage alarm: When the power level of the Controller is low, the current mode indicator flashes to prompt low power. If the Controller is continually used until the voltage of Controller is at a certain value, the Controller will enter the sleep state automatically.
- USB Mode Function
- The Controller plugged into the USB port of the SWITCH system charging stand through the transmission line is automatically recognized as the SWITCH Controller, and the wired Controller connection function of the Switch system needs to be turned on in wired mode.
- The Controller plugged into the USB port on the PC through the transmission line is automatically recognized as X-INPUT Controller mode, and LED1+ LED4 indicator lights up. In the PC X-INPUT mode, press and hold the “-” + “+” simultaneously for 3 seconds to switch to In D-INPUT Controller mode; LED2+LED3 indicator lights up in D-INPUT mode.
- When pressing the L Button and connecting to the PS3 system with a USB cable, it will automatically recognize the PS3 Controller mode.
- When the Controller is plugged into the USB port of an Android Device, it will automatically recognize the Android Controller mode, and LED1+LED4 light up.
- LED Light Indication of all USB Modes: The SWITCH is automatically assigned the corresponding channel indicator by the system; X-INPUT: LED1+LED4 indicators light up; D-INPUT: LED2+ LED3 indicators light up; PS3 mode: channel indicator lights are assigned by the system.
- TURBO Speed Adjustment: 3 gears of repeat speed, 8Hz-12Hz-15Hz; the default is 12HzPress and hold the TURBO Button and then press the corresponding Button to set TURBO; A, B, X, Y, L, ZL, R, ZR can be set; repeat the setting operation to cancel the setting; adjust the TURBO speed; TURBO+UP: Increase the repeat speed by one gear; TURBO+DOWN: Decrease the repeat speed by one gear.
- SWITCH Motor Vibration Intensity Adjustment: Press and hold the L+ZL+R+ZR Buttons simultaneously for 3 seconds to adjust. There are 3 levels of intensity, 25%-50%-100%; the default is 50%, and the corresponding gear light is always ON for 1 second after setting with the motor vibrating for 1 second.
- Six-axis Calibration: In the Controller shutdown state, press and hold “B” + “-” + HOME simultaneously to turn on the Controller, two sets of front and rear indicator lights flash, press the “+” key again to calibrate.
- Reset Function: When the Controller function is abnormal or crashes, the state of the Controller can be reset by short pressing the Pairing Button.
- Controller Reference Current****
Current| Typical Value
---|---
Sleep Current| 30UA
Pairing Current| <30MA
Working Current| <30MA
Motor Vibration Current| ≈60-120MA - Controller Electrical Specifications****
Power Supply Mode| Built-in Lithium Battery| Usage Time| ≈16 Hours
---|---|---|---
Battery Capacity| 500MAH| Charging Time| ≈2 Hours
Charging Mode| USB DC5V| Charging Current| <400MA
Motion Sensor| Six-axis Gyro Sensor| Vibration function| Supports Dual Motors
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>