SUMMERSET CART-TRL32 32 Inch TRL Grills Instruction Manual

: July 23, 2024
: SUMMERSET

Table of Contents

SUMMERSET CART-TRL32 32 Inch TRL Grills
ProductSpecifications
Product Usage Instructions
TRL Cart Assembly Instructions
Description
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUMMERSET CART-TRL32 32 Inch TRL Grills

ProductSpecifications

Model: CART-TRL32 / CART-TRL38
Dimensions: Varies based on model
Material: Steel
Color: Black
Weight Capacity: Varies based on the model

Product Usage Instructions

Step 1: Unboxing and Preparation

Remove all parts from the carton and peel off any protective film before assembly. It’s recommended to have two people for this process.

Step 2: Attaching Casters

Position the Bottom Panel (#2) upside down on a protective surface. Attach 2 Locking Casters (#1A) and 2 Casters (#1B) using 4 screws (H-1) and 4 Lock Washers (H-2) per caster.

Step 3: Tank Bracket Assembly

Attach the Tank Bracket Assembly (#10 -11) to the underside of the Bottom Panel (#2) using 2 screws (H-1).

Step 13: Final Touches

Once assembly is complete, make sure the barbecue is securely installed into the cart. Secure the barbecue head with screws (H-1) through the designated holes.

Note: Some adjustments may be necessary for proper placement or leveling. Tighten all screws with a screwdriver once the cart is level.

Safety Warning

If applicable, ensure that the grill transformer is mounted on the outside of the cart for safety reasons.

TRL Cart Assembly Instructions

Model # CART-TRL32 / CART-TRL38

Step 1: Remove parts from the carton and remove all protective film prior to assembly. (2 people recommended for assembly)
Step 2: With the Bottom Panel (#2) positioned upside down on a protective surface, attach the 2 pcs Locking Casters (#1) and 2 pcs Casters (#1B) using 4 pcs of 10×24 screws (H-1) and 4 pcs of Locking Washers (H-2) per caster.
Step 3: Attach the Tank Bracket Assembly (#10 -11) to the underside of the Bottom Panel (#2) using 2 pcs of 10×24 screws (H-1).
Step 4: Turn the Bottom Panel (#2) upright and then attach the inference Bracket (#12) to the Bottom Panel (#2) with 4 pcs of 10×24 screws (H-1).
Step 5: Attach the Right and Left Side Panels (#3A & #3B) by using 6 pcs of the 10×24 screws (H-1).
Step 6: Attach the Lower Back Panel (#5A) to the Left & Right Side Panels using 6 pcs of 10×24 screws (H-1).
Step 7: Attach Upper Back Panel (5B) to the Left & Right Side Panels using 6 pcs of 10×24 screws (H-1).
Step 8: Lay the Front Doors on a flat surface and attach the Front Door Handle (#8) to each Front Door (#6) using 2 pcs of 10×24 screws (H-1), for each handle.
Step 9: (Best done with an assistant) Attach the Front Strut Assembly (#4) between the front of each Side Panel and secure with 6 pcs of 10×24 screws (H-1).
Step 10: Place the Front Doors (#6) into the cart assembly, by first inserting the Bottom Pin of the door into the hole located on the Bottom Panel. Then insert the Upper Pin of the door into the hole located on the underside of the Front Strut (#4). Follow
same procedure for both doors.
Step 11: Attach the Side Shelf (#7) to each Side Panel by using 4 pcs 10×24 screws (H-1).
Step 12: Attach the Lower Magnetic Catch (#9) by using 2 pcs of 10×24 screws (H-1) to the center of the Bottom Panel (#2). You may have to adjust both magnets to make sure they have good contact with both doors.
Step 13: Finally, the barbecue is ready to be installed into the cart. Once installed, secure the barbecue head with 2 pcs 10×24 screws (H-1) through the holes that are on each side (underneath the grates inside bbq on right and left side toward front).

Note: Some adjustments may be needed to obtain proper placement or level positioning in the cart. Make sure to tighten all the screws with a screwdriver once the cart is level.

Note: The Propane tank is held in position by the Tank Bracket Screw (#11).

SAFETY WARNING: If applicable, the grill transformer should be mounted on the OUTSIDE of the Cart.
14520 DELTA LANE. STE. 105. HUNTINGTON BEACH, CA 92647 800.966.8126 SUMMERSETGRILLS.COM