ISAKE XTY01 Star Projection Lamp Instruction Manual
- June 15, 2024
- ISAKE
Table of Contents
Star projection lamp
Instruction Manual
XTY01 Star Projection Lamp
Thank you very much for choosing our product among thousands of products, this
product can let you experience smart light + Bluetoothspeaker + Galaxy
projector bring enjoyable experience; Before using the product, Please read
this Manual Carefully Keep It in a Safe Place.
button descriptions Plug (TYPE-C power cord)
Short press to turn the ambient light on/off; Long press to turn off the
ambient light and projector light.
Short press to change the RGBW light mode; Long press to turn off the ambient
light.
short press turns on the projector lamp; long press to stop or start the
projection rotation.
| | |
---|---|---|---
Film trays (for projection)Each film tray has a different scene| TYPE-C power
cord x1 5V 2A adapter| Instruction Manualx1| Remote control unit x1
- Tear off the dust sticker, Adjust the sharpness of the focus by rotating this part
- Pull open the film bin
- Remove/replace the film tray
- Push the film bin into the film tray
(Note the front and back of the film, the film has a pattern up side is the correct side)
Remote Control Description
This product adopts 433 wireless remote control scheme, It can be adjusted at
any angle
Product Parameters
Model: XTY01
Power supply: DC/SV 2A
Speaker: 42 3W
RGBW Power: 3 W
Projector lamps Power: 3 W
Material: ABS+PC
Light modes: 256
Transmission distance: 2-6M
Size: 122x110x125mm /4.8×4.33×4.92in
Net weight:
Precautions
-
Avoid squeezing the product with heavy objects
-
Clean the surface of the product with a soft cotton cloth, do not use corrosive solutions to clean it.
Avoid placing the product near the heat sources, such as air-conditioner vents, heating vents, etc. Avoid near humidifiers and other locations where humidity changes dramatically. Avoid placing in the location of direct sunlight. -
The light source in this lamp should be repiaced by the manufacturer or its service agent or other qualified person.
-
This lamp can only be used indoors.
-
The complimentary USB cable is only for this product, do not use it for other products.
FCC warning statements:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, usesr and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement.
HappyLighting
User Manual
http://download.appglobalmarket.com/happylightingdownload.html
- Scan the QR-Code to download the App
- Access to the Google Play and Apple Store. Search for the “Happy lighting” APP to download and install
Bluetooth Connection
For the first time you use, please following the below steps:
A. First, please enter your phone settings, open the Bluetooth. Note: For
Android phone, also need the Location Services.
B. Second, open the ‘Happy Lighting app’ , the app will automatically scan and
connect the device.
C. Play Bluetooth music: search for the Bluetooth model”AC6923″, select the
connection, and “Bluetooth connection’ will be prompted after the connection
is successful.
Main User Interface
Adjust. Change the RGB colors and brightness.
Tape:
Phone Mic: Change RGB colors by phone microphone input voice rhythm.
Device Mic: Change RGB colors by device microphone input voice rhythm.
There are four modes for users to choose. Style: Change RGB colors by
fixed model. Timing: Set timers, can auto On/Off the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>