Kevi TS5 Digital Alarm Clock User Manual

: June 17, 2024
: Kevi

Kevi TS5 Digital Alarm Clock User Manual

Tips:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
The clock works and lasts a few hours if it is powered by battery ONLY, please keep it plugged in always!

Thank you for purchasing from HOUSBAY! Please read these instructions carefully and keep the user manual in safe place for future reference.

Instructional Video

Please scan the QR code here to access the instructional video of this product.

https://www.youtube.com/@housbay_offical2808

Features

5 Alarm Sounds & 9 Minutes Snooze
Bluetooth for Streaming Music and Synchronizing Time from phone
12 Colourful Night Light
0-100% Brightness Control For Display
0-30 Level Adjustable Volume
True Battery Backup
12/24H Mode

Package Include

1 * 1.Sm DC Adapter
1 *User Manual

Power Specifications

AC 100-240V, 50/60Hz.
DC SV/2A

Front View

Top View

Back View

Getting Started

Plug the adapter into a standard household outlet, you will see 7:00 on the display and the clock is ready to be set.

Notice:
If the display is “blank” after plugging in, please check whether the DISPLAY DIMMER on the back is at the HIGH position.

Time Setting

Alarm Setting

Wake-Up Light

When the preset alarm time comes, the wake-up light will light up with the alarm sound. Please note the following:

The wake-up light is preset and cannot be adjusted.
The wake-up light will turn on/off when the alarm is turned on/off.

Alarm Pause & Snooze

Notice:
The alarm will automatically turn off after 60 minutes if no action is taken.

Alarm On/Off

Display Brightness Setting

Scroll the DISPLAY DIMMER dial at the back of the machine to adjust the display brightness. (It can be adjusted from O to 100%)

Night Light Setting

Bluetooth Connection Setting

2.When the clock is connected to the phone via Bluetooth, it will auto-sync the phone time to the alarm clock. It may fail to auto-sync the time due to incompatible situations on different phone version.
3.When the Bluetooth is on, the volume adjustment is only used for the Bluetooth speaker, the volume of the alarm will not be affected.
4. Please turn up the paired device for the desired volume, then adjust the volume of the Bluetooth speaker as they cannot sync the same volume level automatically.

Battery Operated Setting

The device has a built-in 2400 mAh lithium battery.
Under the battery power, all functions can be used normally.
The clock works and lasts a few hours if it is powered by battery only, please keep it plugged in always!

Power ON/OFF

Press and hold the ▭ button on the back for 2 seconds to turn ON/OFF the machine.

Reset

Press and hold the ◀ and ▶ buttons for 2 seconds at the same time, and all settings of the machine will be reset.

Support

The Bluetooth Alarm Clock with Night Light comes with one year warranty. If you have any issue with this machine, please contact us at Support@keviec.com. We will address your issue within 24 hours.

FCC Requirement
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>