Bear JYH-B40Q1 Medicine Cooker User Guide

: June 17, 2024
: BEAR

Table of Contents

Medicine Cooker
Product Introduction
Control Panel
User’s Guide
Basic Operation Procedure
Function operation
Basic Parameter Table
Function Reference Table
Cleaning and Maintenance
FAQ Analysis
Food Contact Materials Information Sheet
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bear JYH-B40Q1 Medicine Cooker User Guide

Medicine Cooker

Model:JYH-B40Q1/JYH-A30A1

Warning: Please read this instruction manual carefully before using the product! This product is only for use in homes or similar places.
Implementation standards : GB 4706.1-2005 GB4706.19-2008 GB 4706.14-2008GB 4806.1-2016
Note: If the product pictures are slightly different from the actual product, please refer to the actual product.

Product Introduction

Control Panel

Turn on the power, the buzzer will beep, and the display will always light up and show “OFF”

User’s Guide

Safety Precautions

Before use, check whether the rated voltage indicated on the product nameplate is consistent with the voltage you are using.
This product is connected to AC power, and the socket it uses must have a grounding device.
When in use, the product should be placed on a stable platform and kept out of the reach of children.
Do not use excessive force when operating the keys to prevent damage to the keys.
Do not use it on or near heat-resistant surfaces such as carpets or plastics, and do not place objects that may be damaged by steam on top of this product.
if the product reaches high temperature, please unplug the power and wait 10 minutes before adding water to the kettle. Do not touch the heating element at this time to prevent burns.
After use, there is still residual heat on the heating plate and its surroundings, so be careful of burns!
Do not let liquid flow into the product during cleaning to avoid danger!
Before cleaning or when not in use, please turn off the power and unplug the power plug, and wait for the product to cool completely before cleaning.
If the body, base and other parts of the kettle are damaged, please do not use it and send it to a designated maintenance service point for inspection and repair.
If the power cord cord is damaged, it must be replaced by a specialist from the manufacturer, its service department or similar department in order to avoid danger.
Please keep the surface of the heating plate of the machine clean. After using it for a period of time, the dirt on the surface of the heating plate must be cleaned in time.
It is normal for the kettle body to heat up during the use of the product. When pouring water, you can only lift the kettle body by the handle. Do not touch the hot surface of the kettle body with your hands to avoid burns.
The appliance must not be operated with an external timer or independent remote control system.
Ceramic containers cannot be burned in open flames, only use this product!
During use, if any problem occurs, please unplug the power plug from the socket first.
Children and people with disabilities must use it under the supervision of a guardian

Basic Operation Procedure

“Appointment” Button:

Press the “appointment” button, after the buzzer beeps, the “Appointment” indicator light flashes, entering the reservation setting state, and the adjustment time is 30 minutes. After setting, press the function key to select the function, press the “Start/Cancel” button to confirm, the reservation indicator light will always be on, and the reservation time will start counting down. When the countdown is over, the reservation indicator light will not light up. and the preset function will be automatically entered: if set After setting the reservation time, if there is no operation within 10 seconds, the program will automatically enter the standby state and display “OFF”; if no reservation is required, please skip this function,

Function” Keys:

ON Dysk Press the “Function” button to enter the function setting state, followed by Chinese medicine, herbal tea, soup making. and keeping warm. When any function is selected, the corresponding indication flashes. Press the “Start/Cancel” button or wait for 10 seconds. After entering the working state, the indicator lighte of the corresponding function and the display screen are always on.

Add Water” Button

After setting up the function, you can select the program “2 Bowls”-“3 Bowls”-“4 Bowls” according to the capacity of brewing Chinese medicine or herbal tea (the capacity of each bowl is between 200mL and 300mL), and select the instructions corresponding to the different amounts of water added. The indicator light will flash. Press the “Start/Cancel” button or wait for 10 seconds, and the indicator light will remain on Dus Dyse

“Start/Cancel” Button

After the setting is completed, you can press the “Start/Cancel” button to directly enter the working state or wait for 10 seconds to automatically enter the working state. The indicator light of the corresponding function is always on and the countdown begins, when the countdown ends, the corresponding function indicator light does not light up, and enters the keep warm function, the keep warm function indicator light is always on

**** time adjustment key key is the time increasing key; “-” is the time decrementing key. When setting the appointment time, the minimum time sat is 10 minutes and the maximum time is 9 hours and 50 minutes; when short pressing the key. the time will increase or decrease in units of 10 minutes; when long pressing, the time will Continuous and rapid automatic adjustment every 10 minutes. When setting the function time, short press to increment or decrement every 5 minutes. When long pressed, the time will be automatically adjusted continuously and quickly every 5 minutes.

Function operation

When using, place the machine on a level surface.

actuality actual needs, add materials and of water. sokan appropriate According

Cover the port

Put the medicine pot on the heating tray.

Note: The ceramic cup with this product is not allowed to be heated on the heating plate.

Plug it in.

Set the boiling time according to actual needs. For details, please refer to the “Function Reference Table”.

After the set work is completed, the machine automatically enters the keep warm state, the original function indicator light goes out, the keep warm indicator light turns on, and the keep warm time is 2 hours.

n the case of dry burning, the display will flash “EO”, and after the buzzer beeps for a few seconds, it will automatically enter the standby state and display “OFF” continuously.

Basic Parameter Table

Product name:	Medicine Cooker
Product model	JYH-B40Q1
Rated voltage	220V-
Rated frequency	50Hz
Rated power	500W
Rated capacity	3.5L
Overall dimensions (LxWxH)	270×254×282 (mm)

Function Reference Table

Function| Added Water
(200-300m1/bowl)| Reference time (hours:minutes)| Applicable amount of medicinal /soup material| Fire control mode
---|---|---|---|---
Traditional Chinese medicine| 2| 0: 45| Add water and herbs as directed| Microcomputer automaticconversion
3| 1:            20
4| 1:            50
Herbal tea| 2| 0: 35| 50-100g
3| 0: 40| 100-150g
4| 0: 45| 150-200g
Cook soup| 3-5| 2:            30| 200-300g

Warm Tips:

. The data shows that the capacity of a bowl of water is about 200-300mL;
The preset is for reference only, because the amount of water absorbed by different herbs is different, the amount of water decocted is subject to the actual. In addition, the decocting time can be adjusted manually according to the actual situation.
The above data is tested at 25°C room temperature for reference only

Cleaning and Maintenance

After use, you must unplug the power plug, and then wait for the body to cool before cleaning.
Ceramic POTS can be cleaned with dish soap and sponge.
Dyso Heating plate surface dirt renoval method: do not immerse the base in water or wash with water, the outer surface of the product can only be wiped with a wet towel (wring out the water) to avoid leakage and failure.
Handle the ceramic pot gently when using or moving it. sokan
If the product can not be used normally, please check whether the plug of the power cord is plugged in, whether there is a power failure, otherwise, please send to the company’s maintenance station for repair, or entrust professionals to repair, do not disassemble and repair by yourself.
If the product is not used for a long time, please clean it, put it into the packing box, and put it in a ventilated and dry place to avoid moisture and affect the useit
After each use, the residue should be removed, add a small amount of water and detergent to the ground pot, scrub the inside of the pot with a soft cloth or sponge, and then drain the water inside the pot. When wiping, do not plug in the power plug.

Attention:

After use, you must unplug the power plug, and then wait for the body to cool before cleaning;
Do not immerse the base in water, do not use corrosive detergent, use neutral detergent;
Do not use banana water, gasoline, decontaminating powder, hard drama or stainless steel wire ball to wipe, so as not to damage the surface;
If the product is not used for a long time, please clean it, put it into the packing box, and put it in a ventilated and dry place to avoid moisture and affect the use.

FAQ Analysis

No display on digital screen
Is there a power outage?
Is the power cord plug inserted into the outlet?
Is the power outlet turned off?

• Food is not cooked
Is the time set correctly? Is the time set down?
Too little water in the pot?

Can ceramic pots be heated open flame?

Ceramic pots are fired at around 1300°C during the production process, and can meet the requirements of open flame heating. However, in order to avoid improper use by users, such as excessive firepower, or open flame burning without water, or accidental bumps that cause micro cracks and then open flame heating, all ceramic pots are fired. The ceramic pot may be damaged and cause personal injury, so it must be used only on the machine of this product according to the instructions!

Note: If the fault cannot be eliminated after analyzing the above phenomena, please contact our company’s maintenance point or dealer. Non-professionals are strictly prohibited from disassembling and assembling the machine by themselves.