FOCAL ON WALL 300 Wall Mounted Speakers User Manual

June 17, 2024
FOCAL

FOCAL Logo ON WALL 300
User Manual

ON WALL 300 Wall Mounted Speakers

FOCAL ON WALL 300 Wall Mounted Speakers

FOCAL ON WALL 300 Wall Mounted Speakers - ON WALLFOCAL ON WALL 300 Wall Mounted Speakers - ON WALL
1FOCAL ON WALL 300 Wall Mounted Speakers - ON
WALL 2![FOCAL ON WALL 300 Wall Mounted Speakers

Specifications

| ON WALL 301| ON WALL 302
---|---|---
Type| 2-way loudspeaker| 2.5-way loudspeaker
Drivers| 2×4″ (100mm) Flax MidBass 1×1″ (25mm) Tweeter TNF| 4×4″ (100mm) Flax MidBass 1×1″ (25mm) Tweeter TNF
Sensitivity (2,83V/1m)| 87dB| 91dB
Frequency response (±3dB)| 53Hz – 28kHz| 50Hz – 28kHz
Low frequency point (-6dB)| 44Hz| 40Hz
Nominal impedance| 8Ω| 8Ω
Minimum impedance| 5.5Ω| 5Ω
Recommanded amplifier power| 25 – 130W| 40 – 180W
Crossover frequency| 2,500Hz| 1,100Hz – 2,500Hz
Dimensions (HxWxD)| 31 1/2 x6 1/8 x3 9/16 ” (80×15.5x9cm)| 49 3/16x 6 1/8 x3 9/16 ” (125×15.5x9cm)
Net weight (unit with grille)| 13lbs (5.9kg)| 20.72lbs (9.4kg)
Packaging dimensions (HxWxD)| 35 13/16 x11 13/16 x9 1/16 ” (91x30x23cm)| 54 5/16x 11 13/16 x8 1/4 ” (138x30x21cm)
Net weight (with packaging)| 16.97lbs (7.7kg)| 26.45lbs (12kg)

READ FIRST!

IMPORTANT SAFETY INSTRUCTIONS!
An exclamation mark in an equilateral triangle warns the user that the manual contains important instructions on how to use and look after the device.

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all the instructions.
  5. Do not use this device near water.
  6. Only clean with a dry cloth.
  7. Do not obstruct ventilation openings. Follow the manufacturer’s instructions for installing the device.
  8. Do not install the device close to a heat source such as a radiator, cooker, heat vents or any other appliance (including amplifiers) that gives out heat.
  9. Only use accessories recommendedby the manufacturer.
  10. Only use trolleys, stands, tripods, mounts or tables recommended by the manufacturer or sold with the device. If using a trolley, take extra care when moving the trolley and device together, to prevent the device from falling off and causing injury .
  11. All maintenance tasks should be performed by a qualified professional. Maintenance is required in case of any kind of damage to the device (damaged cable or plug, spillages or objects inserted into the device, exposure to rain or humidity, if the device malfunctions or overturns, etc.).
  12. To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at high volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposure to excessive volumes (over 85 dB) for more than one hour can cause irreparable damage to your hearing .

Please validate your Focal-JMlab warranty, it is now possible to register your product online: www.focal.com/warranty

http://www.focal.com/warranty/

Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product, we recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future.
Handling (fig. A)
We strongly advise having two people lift the products during unpacking and installation onto the wall.
Grilles (fig. B)
The On Wall loudspeakers are supplied with grilles to protect the speaker drivers. They are easy to fit or remove thanks to their magnetic attachment system.
Our policy of continual product improvement means that Focal-JMlab reserves the right to modify the technical specifications of its products without notice. Product may vary from images.
Connections (fig. C & D)
The connectors for the On Wall loudspeakers ensure reliable and versatile contacts for stripped cables. The cable diameter should not exceed 0 3/16 ” (4mm).
It is imperative that you respect the polarity of the loudspeakers. The connector marked ‘+’ must be connected to the positive output on the amplifier, and the connector marked ‘-’ must be connected to the negative terminal. Stereo image and bass perception will be seriously compromised if these conditions are not respected. Choose good quality cables with a crosssection appropriate for their length: your dealer will be able to advise you.
Installing the loudspeakers (fig. E & F)
The On Wall loudspeakers must be centred in relation to your screen. The tweeter (treble speaker driver) must be aligned with the middle of your screen horizontally for the left and right loudspeakers, and vertically for the central loudspeaker (fig. F).
For optimal sound effects, the loudspeakers must be placed as close as possible to your loudspeaker. We recommend that you place your central loudspeaker horizontally, below your screen. In the horizontal position, you can turn the logo the right way up by rotating it. Position the logo vertically by turning it (fig. E).
Fixing to the wall (fig. G, H & I)

  • Stick the feet onto the back of the loudspeaker in the spaces provided in the four corners (fig. G).

  • Use the template to position the holes in the wall correctly. The template shows you where to drill the holes, in the vertical or horizontal position (front/back). Before drilling, ensure that you hold the template at the correct level so that the loudspeaker is in the correct vertical or horizontal position. Screws and wall plugs are not supplied. Only use wall plugs suitable for the composition of your partition.

  • As with any wall or ceiling mounting, installing the loudspeakers can involve risks and the methods of drilling and mounting to walls, ceilings and other surface depend on the conditions and standards of construction, refurbishment, safety and cabling in force and applicable to the brackets involved. For this reason, the relevant drilling, mounting and installation operations must be performed by a qualified professional who is familiar with the installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the  customer’s sole responsibility.
    Focal is therefore not liable in any capacity whatsoever in the event of unhooking, fall, accident and/or any other result or damage of any kind related to the installation of loudspeakers.

  • Connect the cables to the loudspeaker, respecting the polarity (+/-), before hanging it on the wall.

  • Position the loudspeaker in front of the wall attachments. Attach the loudspeaker firmly to the brackets by applying pressure to the top of them (fig. H & I). Ensure that both brackets are well attached.

Running-in period
The speaker drivers used in the On Wall loudspeakers are complex mechanical assemblies which need a break-in period to operate at their best and to become acclimatised to the temperature and humidity of your environment. This break- in period varies depending on the conditions in question and may take several weeks. To reduce this time, we recommend operating your loudspeakers for about twenty consecutive hours. Once the loudspeaker’s characteristics have totally stabilised, you will be able to enjoy the full potential of your On Wall loudspeakers.
Special precautions
To look after the On Wall loudspeakers, simply dust using a dry cloth. If the loudspeaker is marked, we recommend that you use just a damp cloth. Never use solvents, detergents, alcohol or corrosive products, scrapers or scouring utensils to clean the surface of the loudspeaker. Avoid positioning the loudspeakers near to any heat sources.
Choosing an amplifier
It is not an excess of amplifier power that can damage your loudspeakers and drivers, but rather a lack of power. In fact, if the volume is too high, the amplifier saturates and generates parasite signals that may destroy the tweeter. The dynamic capacity and definition of On Wall loudspeakers are high enough to reveal the strengths and weaknesses of whatever amplifier is connected to them. Your dealer will be able to assist you in your choice according to your tastes and budget.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by the official Focal distributor in your country. Your distributor can provide all details concerning the conditions of warranty. Warranty cover extends at least to that granted by the legal warranty in force in the country where the original purchase invoice was issued.
Correct elimination of this product.
This marking indicates that within the EU this product should not be disposed of with other household wastes. To prevent any risk to the environment or human health, please recycle them responsibly to encourage the reuse of material resources. To return your used device, please use the return and collection systems available, or contact the retailer where you purchased the product. They can recycle this product safely.

https://www.focal.com/regulatory-product-information
Scan QR code for information on packaging disposal
Focal-JMlab ®
– BP 374 – 108, rue de l’Avenir – 42353 La Talaudière cedex – France – www.focal.com
Tel. (+33) 04 77 43 57 00 – SCCG – 20/12/2022 – v5 – CODO1648

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals