Emerson EM-227MX Wireless Headset Owner’s Manual

Emerson EM-227MX Wireless Headset

Product Information

Specifications

• Model: EM-227MX
• Controls: Volume up/down, Power Button, Earbud, Indicator light, Charging Socket, Microphone
• In the Box: Bluetooth Headset, Owner’s Manual, USB Charging Cable, AC Charger, 3 size earbuds (Small, Medium, Large)

Product Usage Instructions

1Charging the Bluetooth headset

1. Connect the USB cable to the charging socket on the headset.
2. Connect the other end of the USB cable to either the AC Charger and plug it into a wall (A/C) outlet or to a computer’s USB port.
3. The RED LED indicator light turns on.
4. The RED LED indicator light shuts off when the headset is 60% charged. To fully charge the headset, 12 hours of charging is required

Pairing the headset with a Bluetooth-enabled phone

1. Ensure that your Bluetooth Headset and mobile phone are within 3 feet of each other during pairing.
2. Make sure the Bluetooth Headset is turned off.
3. Press and hold the [POWER] button until the RED and BLUE lights flash alternately.
4. Set the phone to search for Bluetooth devices.
5. When the phone finds the headset, confirm by selecting “EM227” from the list.
6. Enter passcode 0000 when prompted by the phone.
7. If the pairing was successful, the indicator light flashes a low steady blue. You are now ready to make and receive calls.

Using your Bluetooth headset

• Powering ON/OFF: To turn ON, press and hold the [POWER] button until the BLUE LED indicator light turns on. To turn OFF, press and hold the [POWER] button until the indicator light turns red and shuts off.
• Answering/Ending a Call: To answer a call, press the [POWER] button once. To end a call, press the [POWER] button once.
• Making a call: Dial the number and press the send button from your phone, the call is automatically transferred to the headset.
• Adjusting volume: Press the [VOLUME DOWN] or [VOLUME UP] button to adjust the volume to the desired level.

FAQ

Q: How long should I charge the Bluetooth headset for the first time?
A: It is recommended to charge the headset for 12 hours before using it for the first time.

Q: Can I use the Bluetooth headset while driving?
A: The use of mobile handsets and wireless headsets while driving may be regulated by local laws. Please check your local laws regarding their use. If you choose to use the Bluetooth headset while driving, ensure that your attention and focus remain on your driving.

Drive safe

Driving while talking on your mobile phone is dangerous, and illegal in many states. Although this device enables drivers to conduct hands-free conversations, it is still dangerous to drive and use a mobile phone at the same time. We recommend pulling over before making or answering calls, especially during adverse driving conditions. Please use your mobile phone, and our product responsibly while driving!

Safety information

• Check local laws regarding use of a mobile handset and wireless headset while driving. If you use the Bluetooth Headset while driving, ensure your attention and focus remains on your driving.
• Observe all signs in the designated areas where some electronic devices or RF radio products are required to be switched off. These could include airplanes, hospitals, blasting areas, and potentially explosive atmospheres.

Location of controls

IN THE BOX

Charging the Bluetooth headset

1. Connect the USB cable to the charging socket on the headset.
2. Connect the other end of the USB cable to the:
   • AC Charger, and plug into a wall (A/C) outlet.
   • Computer’s USB port.
3. The RED LED indicator light turns on.
4. The RED LED indicator light shuts off when the headset is 60% charged.(to fully charge the headset 12 hours charging is required)

NOTE : Make sure you charge your headset for 12 hours before using it for the first time.

Pairing the headset with a Bluetooth-enabled phone

1. Keep your Bluetooth Headset and mobile phone within 3 feet of each other during pairing.
2. Make sure the Bluetooth Headset is turned off.
3. Press and hold the [POWER] button until the RED and BLUE lights flash alternately.
4. Set the phone to search for bluetooth devices.
5. When the phone finds the headset, confirm by selecting EM227 from the list.
6. Set the phone to search for bluetooth devices.
7. When the phone finds the headset, confirm by selecting EM227 from the list.

Using your Bluetooth headset

Powering ON/OFF

• To turn ON, press and hold the [POWER] button until the BLUE LED indicator light turns on.
• To turn OFF, press and hold the [POWER] button until the indicator light turns red, and shuts off.

Answering/Ending a call

• To answer a call, press the [POWER] button once.
• To end a call, press the [POWER] button once.

To make a call
Dial the number and press the send button from your phone, the call is automatically transferred to the headset.

Adjusting volume
Press the [VOLUME DOWN] or [VOLUME UP] button to adjust the volume to the desired level.

Redialing the last number called (Dependent on your phone supports this feature)
Press and hold the [VOLUME UP] button.

Voice dial (Dependent on your phone supports this feature)
Press and hold the [POWER] button until you hear the confirmation tone, and then say a name from your phone’s contact list.

• Refer to your mobile phone’s user guide for more information regarding voice dialing

Wearing your Bluetooth headset

Product Maintenance

• Power off this product when not in use.
• DO NOT expose this product to water or other liquids.
• DO NOT use abrasive cleaning solvents to clean the Bluetooth Headset.
• If you will not use the Bluetooth Headset for long periods, be sure to store it in a dry place, free from extreme temperature, humidity and dust.

Warranty information

90-Day Limited Warranty
In the unlikely event that this product is defective, or does not perform properly , you may within ninety (90) days from your original date of purchase return it to the authorized service center for repair or exchange.

TO OBTAIN WARRANTY SERVICE

• Provide proof of the date of purchase within the package (Dated bill of sale).
• Prepay all shipping costs to the authorized service center, and remember to insure your return.
• Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
• Describe the defect or reason you are returning the product.

Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier.

The shipping address of the authorized service center is

• Southern Telecom Inc. ATTN: Returns Department
• 14-C 53rd Street
• Brooklyn, NY 11232
• Should you have any questions or problems concerning this product, please contact our customer service department, toll free at:1-877-768-8483
• Monday – Thursday: 9AM – 5PM (EST) Friday: 9AM – 3PM (EST) or via e-mail at cs@emersonphones.com. To obtain service after the warranty period, please e-mail cs@emersonphones.com with product information, date of purchase and nature of the problem. Customer service will reply to the e-mail with service instructions.

Warranty service not provided
This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, and unauthorized modification. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged.

Limitation of Warranty

• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY SOUTHERN TELECOM INC. IT’S AGENTS, EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. SOUTHERN TELECOM INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY

Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.ON PERIOD SET FORTH ABOVE.

FCC information
FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

www.emersonphones.com
Manufactured by Southern Telecom Inc. Brooklyn NY. 11232 Emerson and G-Clef logo are registered trademarks of Emerson Radio Corp. Parsippany, New Jersey USA. © 2009 AIT Inc. All rights reserved. The Bluetooth® word mark and logos are owned by the Bluetooth SIG. Inc.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>