EMERSON IS-WEBRT3 Liebert Card Instruction Manual
- June 17, 2024
- Emerson
Table of Contents
EMERSON IS-WEBRT3 Liebert Card
Product Information
Specifications
- Product Name: Liebert IS-WEBRT3 Card
- Web Support: Yes
- Liebert MultiLinkTM Support: Yes
- SNMP Support: Yes
- Liebert Nform Support: Yes
- Technical Support/Service: Available
Product Usage Instructions
Installation
- Connect the Liebert IS-WEBRT3 Card to the corresponding port on your Liebert equipment using the provided cable.
Set Liebert IS-WEBRT3 Card Password
To set a password for the Liebert IS-WEBRT3 Card:
- Access the Web management interface of the card by entering its IP address in a web browser.
- Locate the password settings section and enter a desired password.
- Save the password and remember to keep it in a safe place.
Control Functions
The Liebert IS-WEBRT3 Card provides various control functions:
- Status Information: All users on your network can view status information of the connected Liebert equipment.
- Control and Configuration: Access to control and configuration capabilities is protected by a username and password combination.
- Password Change: You can change the password from the Web management interface or using the DeskPro-Net Utility.
Liebert MultiLinkTM Support
To download the Liebert MultiLink software:
- Visit multilink.liebert.com.
- Download the software from the website.
SNMP Support
The Liebert IS-WEBRT3 Card enables SNMP management of Liebert PSI equipment.
To integrate the card into your SNMP implementation:
- Compile the UPS MIB (Management Information Base) on your network management station (NMS).
- The UPS MIB is included in this package on CD-ROM and supports both Windows and Unix file formats.
Liebert Nform Support
Liebert Nform can centrally manage alarm notifications and provide an easy
interface to access critical system information. To download the Liebert Nform
software:
- Visit nform.liebert.com.
- Download the software from the website.
Technical Support/Service
If you require technical support or service:
- Web Site: www.liebert.com
- Monitoring: 800-222-5877 (US), 614-841-6755 (Outside US)
- Email: monitoring@emersonnetworkpower.com
Locations
- United States: 1050 Dearborn Drive, P.O. Box 29186, Columbus, OH 43229
- Europe: Via Leonardo Da Vinci 8, Zona Industriale Tognana, 35028 Piove Di Sacco (PD), Italy
- Asia: 7/F, Dah Sing Financial Centre, 108 Gloucester Road, Wanchai, Hong Kong
FAQ
Q: Where can I find the full user manual for the Liebert IS-WEBRT3 Card?
A: The full user manual (SL-52665) is available online at
www.liebert.com. We recommend consulting the user
manual for detailed instructions.
INSTALL
- Locate the Liebert IntelliSlot bay on your Liebert equipment. You might need to remove a plastic cover.
- Insert the Liebert IS-WEBRT3 Card into the bay.
- Secure the card with the supplied screws.
- Connect the card to your network with a CAT5 Ethernet cable.
SET LIEBERT IS-WEBRT 3 CARD PASSWORD
- Insert the Liebert PSI-RT3 Software CD and install Liebert DeskPro-Net Utility on your computer.
- Start Liebert DeskPro-Net Utility by clicking on Start>Programs>NetAgent>DeskPro-Net Utility. The software will automatically find and list available Liebert IS-WEBRT3 cards.
- Double-click on a card in the list to launch it.
- Enter an Account (login name) and Password—Record the login and password and save them in a safe place.
CONFIGURE LIEBERT IS-WEBRT3 CARD
- Highlight the card in the list and click Configure to change the card’s IP address, subnet mask, and gateway settings (see your network administrator for the settings). TheLiebert IS-WEBRT3 card can be used with DHCP or BOOTP, where the system assigns an address, but this makes troubleshooting difficult.
- Liebert MultiLink™ will communicate with the Liebert IS-WEBRT3 card. The software can be configured to shut down a computer system in response to utility power failure and the UPS’ battery backup time.
User Manual
This Quick Start Guide is designed to give you the information you need to install and configure the Liebert ISWEBRT3 Card. A full user manual, SL-52665, is available online at www.liebert.com. Liebert recommends that new users consult the user manual.
Web Support
The IS-WEBRT3 Card delivers Web management and control to Liebert equipment. All users on your network will be able to view status information. Control and configuration capabilities are protected by a username and password combination. You can change the password from the Web or from DeskPro-Net Utility.
Liebert MultiLink™ Support
Liebert MultiLink software, can be downloaded at multilink.liebert.com.
SNMP Support
The Liebert IS-WEBRT3 Card enables SNMP management of Liebert PSI equipment.
To integrate the card into your SNMP implementation, you will need to compile
the UPS MIB on your network management station (NMS). The UPS MIB is included
in this package on CD-ROM and supports both Windows and Unix file formats.
Liebert Nform Support
Utilizing the SNMP and Web technologies built into each of the Intellislot Web
cards, Liebert Nform will centrally manage alarm notifications to provide you
with an easy interface to access critical system information.
A downloadable edition is available online at
nform.liebert.com.
Technical Support/Service
Web Site
www.liebert.com
Monitoring
800-222-5877
monitoring@emersonnetworkpower.com
Outside the US: 614-841-6755
Locations
United States
1050 Dearborn Drive
P.O. Box 29186
Columbus, OH 43229
Locations
-
Europe
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD) Italy
+39 049 9719 111
Fax: +39 049 5841 257 -
Asia
7/F, Dah Sing Financial Centre
108 Gloucester Road, Wanchai -
Hong Kong
852 25722201
Fax: 852 28029250
References
- Monitoring Software | Vertiv Critical Infrastructure Solutions
- Liebert® Nform | Centralized Monitoring Software
- Liebert Thermal and Power Systems | Vertiv Brands
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>