dahua TiOC Camera User Guide
- June 4, 2024
- Dahua
Table of Contents
dahua TiOC Camera
How to trigger an e-mail when an event has occurred
For a Camera-only System
The following guide enables you to trigger an e-mail when an event has
occurred on (Series 3) and (Series 5 & 7) camera-only systems.
Series
- DH-IPC-HF/HFW/HDW/HDBW3X4X Series
- DH-IPC-HF/HFW/HDW/HDBW5X4X Series
- DH-IPC-HF/HFW/HDW/HDBW7X4X Series
Examples
- HFW3549T1-AS-PV
- HDW5241TM-ASE
- HFW5242H-ZE
- HDBW7442H-Z
System Version: V2.800.00AD000.0.R Build
NB: The firmware version is based on the latest version when this
document was created and may slightly differ from future versions, however
this will not affect any of the functionality.
Instructions
Step 1: Connect to your email.
Log in to the camera, go to Setting > Network > SMTP (Email) . Then complete
the settings based on your email service and click Test until it shows it has
successfully connected.
Then, click Save to save your settings.
Note: Details for Email settings.
- Firstly, you need to prepare two email addresses – one for sending alarms and one for receiving alarms.
- Secondly, you need to search and find the name and port of the email address for sending email.
Examples
- send@dahua.com
- receive@dahua.com
- Gmail SMTP server: smtp.gmail.com
- Gmail Port:
- Port for SSL: 465
- Port for TLS: 587
Here is a summary:
For details and reference: https://support.google.com/mail/answer/7126229?hl
=en-GB
Note: You may need to adjust your settings to avoid emails ending up in
your spam folder.
Step 2:
Activate corresponding functions in each interface.
Here is an example for IVS function: Go to Setting > Event > IVS , check at
least one rule has been activated like this on the top right corner.
Click Draw rule on the left side, and use the mouse to draw a line or shape
for the target on the scene, and set the parameter accordingly.
Then, click Save to save your settings.
Step 3: Check the email.
If an alarm has been activated you will receive an email with the event
snapshot attached – when it started and when it ended. The following logs are
an example.
- Alarm Event: Tripwire
- Alarm Event: Tripwire end
- Alarm Input Channel: 1
- Alarm Input Channel: 1
- Alarm Start Time (D/M/Y H:M:S): 17/12/2020 09:51:40
- Alarm StopTime (D/M/Y H:M:S): 17/12/2020 09:55:00
- Alarm Device Name: 6F05 Alarm Device Name: 6F05
- Alarm Name: IVS-1 Alarm Name: IVS-1
- IP Address: 192.168.5.65 IP Address: 192.168.5.65
If you still encounter problems operating your Dahua device, please call +44 (0)1628 613 500 Design and specifications are subject to change without notice.
DAHUA UK & IRELAND
Quantum, 60 Norden Road, Maidenhead, Berkshire SL6 4AY
Tel: +44 (0) 1628 613 500
sales.UK@dahuatech.com
support.UK@dahuatech.com
If you still encounter problems operating your Dahua device, please call +44
(0)1628 613 500
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>