IGLOO ICF18 Mobile Refrigeration Appliance Instruction Manual

IGLOO ICF18 Mobile Refrigeration Appliance

Product Information

Specifications

• Models: ICF 18, ICF 32, ICF 40, ICF 60, ICF 80DZ
• Power Supply: 12/24 V DC

Product Usage Instructions

Safety Instructions

• DANGER! Safety instruction: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
• WARNING! Safety instruction: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
• CAUTION! Safety instruction: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
• NOTICE! Indicates a situation that, if not avoided, can result in property damage.

Scope of Delivery
The package includes the following items:

• Cooler
• Connection cable for DC connection
• Connection cable for AC connection
• Operating manual

Intended Use
The cooling device is suitable for cooling food. It is designed to be operated from a DC on-board power supply of a vehicle or boat, from a DC auxiliary battery, or from an AC power supply. The cooling device is also suitable for camping use.

Function Description
This product is only suitable for the intended purpose and application in accordance with the provided instructions. Proper installation, operation, and maintenance are necessary for
satisfactory performance and to avoid possible failure. Please note that Igloo reserves the right to change product appearance and specifications.

FAQ

• Q: Can I use this cooler with a regular household power outlet?
  A: Yes, you can use the cooler with an AC power supply by connecting it to a household power outlet using the provided connection cable.

• Q: Can I use this cooler in my car?
  A: Yes, the cooler is designed to be operated from a DC on-board power supply of a vehicle. Simply connect it to the vehicle’s power socket using the provided connection cable.

• Q: Can I use this cooler for storing medications?
  A: The cooler is suitable for cooling food and may not provide the necessary temperature control for storing medications. It is recommended to consult with a healthcare professional for proper storage of medications.

Explanation of symbols

• Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
• By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit documents.dometic.com .

Explanation of symbols

• DANGER!
  Safety instruction: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

• WARNING!
  Safety instruction: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

• CAUTION!
  Safety instruction: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

• NOTICE!
  Indicates a situation that, if not avoided, can result in property damage.

• NOTE
  Supplementary information for operating the product.

Safety instructions

DANGER! Failure to obey these warnings will result in death or serious injury.

Electrocution hazard

• On boats: If the device is powered by the mains, ensure that the power supply has a residual current device (RCD), a residual cur-rent circuit breaker (RCCB), or a ground fault circuit interrupter (GFCI). Installation, especially in potentially damp areas, must be in accordance with all applicable installation regulations.
• Do not touch exposed cables with your bare hands. This applies especially when operating the device from the AC mains.
• Before starting the device, ensure that the power supply line and the plug are dry.

WARNING! Failure to obey these warnings could result in death or serious injury.

Electrocution hazard

• Do not operate the cooling device if it is visibly damaged.
• If the cooling device’s power cable is damaged, it must be replaced with a suitable power cable or assembly available from the manufacturer or its service agent to prevent safety hazard.
• This cooling device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.
• Plug the device to sockets that ensure proper connection especially when the device needs to be earthed.

Fire hazard

• When positioning the device, ensure the supply cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the device.
• Keep the ventilation openings on the device housing or in installations free of obstructions.
• Do not use any mechanical objects or other means to speed up the defrosting process, unless they have been recommended by the manufacturer for this purpose.
• Do not open or damage the refrigerant circuit.
• Do not use electrical devices inside the cooling device unless they are recommended by the manufacturer for that purpose.

Health hazard

• This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given super-vision or instruction concerning use of the device by a person responsible for their safety.
• Children must be supervised to ensure that they do not play with the device.
• Cleaning and user maintenance must not be carried out by unsupervised children.

Explosion hazard

• Do not store any explosive substances such as spray cans with a flammable propellant in the cooling device.
• CAUTION! Failure to obey these cautions could result in minor or moderate injury.

Electrocution hazard

• Before starting the cooling device, ensure that the power supply line and the plug are dry.
• Disconnect the cooling device from the power supply
  • Before each cleaning and maintenance
  • After every use

Health hazard
To avoid contamination of food, observe the following instructions:

• Check if the cooling capacity of the device is suitable for storing the food to be cooled.
• Food may only be stored in its original packaging or in suitable containers.
• Opening the cooling device for long periods of time can cause significant increase of the temperature in the compartments of the device.
• Clean regularly surfaces that can come in contact with food and accessible drainage systems.
• If the device is left empty for long periods:
  • Switch off the device.
  • Defrost the device.
  • Clean and dry the device.
  • Leave the lid open to prevent mold developing within the device.

NOTICE! Damage hazard

• Check that the voltage specification on the data plate corresponds to that of the energy supply.
• Only connect the cooling device as follows:
  • With the DC connection cable to a DC power supply in the vehicle
  • Or with the AC connection cable to an AC power supply
• Never pull the plug out of the socket by the cable.
• If the cooling device is connected to a DC outlet, disconnect the cooling device and other power consuming devices from the battery before connecting a quick charging device.
• If the cooling device is connected to a DC outlet, disconnect the cooling device or switch it off when turning off the engine. Otherwise the battery may be discharged.
• The cooling device is not suitable for transporting caustic materials or materials containing solvents.
• The insulation of the cooling device contains flammable cyclo-pentane and requires special disposal procedures. Deliver the cooling device at the end of its life-cycle to an appropriate recycling center.
• Do not place the cooling device near naked flames or other heat sources (heaters, direct sunlight, gas ovens, etc.).

Risk of overheating!

• Ensure at all times that there is a minimum of 50 mm (1.97 in) ventilation on all sides of the cooling device. Keep the ventilation area free of any objects that could obstruct the air flow to the cooling components.
• Do not use or store the cooling device in closed compartments or areas with none or minimal air flow.
• Do not fill the inner container with ice or fluids.
• Never immerse the cooling device in water.
• Protect the cooling device and cables against heat and moisture.
• The device shall not to be exposed to rain.

Scope of delivery

Intended use

• The cooling device is suitable for cooling food. The cooling device is designed to be operated from a DC on-board power supply of a vehicle or boat, from a DC auxiliary battery or from an AC power supply.
• The cooling device is suitable for camping use.
• The cooling device is intended to be used in household and similar applications such as
  • Staff kitchen areas in shops, offices and other working environments
  • Farm houses
  • Clients in hotels, motels and other residential type environments
  • Bed and breakfast type environments

Catering and similar non-retail applications

• This product is only suitable for the intended purpose and application in accordance with these instructions.
• This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.
• The manufacturer accepts no liability for any injury or damage to the product resulting from:
  • Incorrect assembly or connection, including excess voltage
  • Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
  • Alterations to the product without express permission from the manufacturer
  • Use for purposes other than those described in this manual
• Igloo reserves the right to change product appearance and product specifications.

Function description

• A low maintenance refrigerant circuit with compressor provides the cooling. The generous insulation and powerful compressor ensure efficient and fast cooling.
• The cooler is portable.
• The cooler can withstand a short-term inclination of 30°, for example on boats.

Scope of functions

• Power supply with priority circuit for connecting to the AC power supply
• Three-level battery monitor to protect the vehicle battery switches off automatically at low battery voltage
• Display with temperature gauge in °C and °F
• Temperature setting: With two buttons in steps of 1 °C (2 °F)
• Display dimming function with 3 brightness levels
• Removable divider

Operating and display elements
Lid latches (fig. 2, page 4)

Operating panel (fig. 3, page 5)

Display switched off automatically due to low battery voltage
3| ERROR| LED flashes red:
Device is switched on but not ready for operation
4| –| Display, shows the information
5| SET| Selects the input mode

• Temperature setting
• Celsius or Fahrenheit display
• Set battery monitor
• Set brightness of display

6| DOWN –| Press once to decrease the value
7| UP +| Press once to increase the value

Connection sockets (fig. 4, page 5)

Item Description

1. Connection socket AC voltage supply
2. AC fuse holder
3. DC fuse cover
4. Connection socket DC voltage supply

Operation

To avoid food waste, note the following:

• Keep temperature fluctuation as low as possible. Only open the cooling device as often and for as long as necessary. Store the foodstuff in such a way that the air can still circulate well.
• Adjust the temperature to the quantity and type of the foodstuff.
• Foodstuff can easily absorb or release odor or taste. Always store food-stuff covered or in closed containers/bottles.

Before initial use

NOTE
Before starting your new cooler for the first time, you should clean it inside and outside with a damp cloth for hygienic reasons (please also refer to the chapter “Cleaning and maintenance” on page 24).

Opening or removing the lid (fig. 5, page 6)

• To open the lid, unlatch (A).
• To remove the lid, push the lid beyond the lid stop position (B).

Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as follows:

1. Switch on the cooler.
2. ICF18,ICF32, ICF40, ICF60: Press the “SET” button (fig. 3 5, page 5) twice.
3. ICF80DZ: Press the “SET” button (fig. 3 5, page 5) three times.
4. Use the “UP +” (fig. 3 7, page 5) or “DOWN –” (fig. 3 6, page 5) buttons to select Celsius or Fahrenheit.

The selected temperature unit then appears in the display for a few seconds. The display flashes several times before it returns to the current temperature.

Saving energy

• Choose a well ventilated location which is protected from direct sunlight.
• Allow warm food to cool down first before placing it in the cooling device to keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket according to its position on delivery.
• On a regular basis, make sure the lid seal still fits properly.
• Defrost the cooler once a layer of ice forms.
• Avoid unnecessarily low temperatures.

Connecting the cooler

Connecting to a battery (vehicle or boat)
The cooler can be operated with 12 V or 24 Vg.

NOTICE! Damage hazard

• Disconnect the cooler and other consumer units from the battery before you connect the battery to a quick charging device. Overvoltage can damage the electronics of the device.
• For safety reasons the cooler is equipped with an electronic system to prevent polarity reversal. This protects the cooler against short-circuiting when connecting to a battery.

Using the fused DC plug

NOTICE! Damage hazard

• For protection of the device the DC cable supplied includes a fuse inside the plug. Do not remove the fused DC plug.
• Only use the DC cable supplied.

1. Plug the DC connection cable (fig. 1 2, page 3) into the DC voltage socket of the cooler (fig. 4 4, page 5).
2. Connect the connection cable to a DC power outlet.

Connecting to an AC power supply

DANGER! Electrocution hazard
Failure to obey these warnings will result in death or serious injury.

• Never handle plugs and switches with wet hands or if you are standing on a wet surface.
• If you are operating your cooler on board a boat from a AC power supply, you must install a residual current circuit breaker or ground fault interrupter between the AC power supply and the cooler.

Seek advice from a trained technician.

• The coolers have an integrated multi-voltage power supply with priority circuit for connecting to an AC voltage source. The priority circuit automatically switches the cooler to AC operation if the device is connected to an AC power supply, even if the DC connection cable is still attached.
• When switching between the AC power supply and the battery supply, the red LED may light up briefly.

1. Plug the AC connection cable (fig. 1 3, page 3) into the AC voltage socket of the cooler (fig. 4 1,page 5).
2. Connect the connection cable to an AC power outlet.

Using the battery monitor

• The device is equipped with a multi-level battery monitor that protects your vehicle battery against excessive discharging when the device is connected to the on-board DC supply.
• If the cooler is operated when the vehicle ignition is switched off, the cooler switches off automatically as soon as the supply voltage falls below a set level. The cooler will switch back on once the battery has been recharged to the restart voltage level.

NOTICE! Damage hazard

• When switched off by the battery monitor, the battery will no longer be fully charged. Avoid starting repeatedly or operating current consumers without longer charging phases. Ensure that the battery is recharged.
• In “HIGH” mode, the battery monitor responds faster than at the levels “LOW” and “MED” (see the following table).

The battery monitor mode can be selected as follows:

1. Switch on the cooler.
2. ICF18,ICF32, ICF40, ICF60: Press the “SET” button (fig. 3 5, page 5) three times.
3. ICF80DZ: Press the “SET” button (fig. 3 5, page 5) four times.
4. Use the “UP +” (fig. 3 7, page 5) or “DOWN –” (fig. 3 6, page 5) buttons to select the battery monitor mode.

Display will be as follows:

• Lo (LOW), Πd (MED), Hi (HIGH)
• The selected mode then appears in the display for a few seconds. The display flashes several times before it returns to the current temperature.

NOTE
When the cooler is supplied by a starter battery, select the battery monitor mode “HIGH”. If the cooler is connected to a supply battery, the battery monitor mode “LOW” will suffice.

Using the cooler

• NOTICE! Overheating hazard
• Ensure at all times that there is sufficient ventilation so that the heat that generated during operation can dissipate. Ensure that the ventilation slots are not covered. Make sure that the device is sufficiently far away from walls and other objects so that the air can circulate.

1. Place the cooler on a firm foundation.
2. Make sure that the ventilation slots are not covered and that the heated air can dissipate. We recommend keeping a gap of at least 50 mm around ventilation holes.
3. NOTICE! Damage hazard
4. Place the cooler as shown (fig. 1, page 3). If you operate the cooler in a different orientation it can be damaged.
5. Connect the cooler (see chapter “Connecting the cooler” on page 16).
6. NOTICE! Excessively low temperature hazard
7. Ensure that the only those objects are placed in the cooler that are intended to be cooled at the selected temperature.
8. Press the “ON/OFF” button (fig. 3 1, page 5) for between one and two seconds.
9. The LED “ ” lights up (fig. 3 2, page 5).
10. The display (fig. 3 4, page 5) switches on and shows the current temperature.
11. The cooler starts cooling the interior.

NOTE
When operating from a battery, the display switches off automatically if the battery voltage is low. The LED “P” flashes orange.

Setting the temperature

ICF18,ICF32, ICF40, ICF60:

1. Press the “SET” button (fig. 3 5, page 5) once.
2. Use the “UP +” (fig. 3 7, page 5) and “DOWN –” (fig. 3 6, page 5) but-tons to select the cooling temperature.
   The cooling temperature appears in the display for a few seconds. The dis-play flashes several times and then the current temperature is displayed again.

ICF80DZ:

1. Press the “SET” button (fig. 3 5, page 5):
2. once for the large compartment
3. twice for the small compartment
4. The chosen compartment display blinks.
5. Use the “UP +” (fig. 3 7, page 5) and “DOWN –” (fig. 3 6, page 5) buttons to select the cooling temperature. Each compartment can be set to work as a refrigerator or a freezer.
   The cooling temperature appears in the chosen compartment display for a few seconds. The display flashes several times and then the current temperature is displayed again.

Switching a compartment off or on (ICF80DZ)
If only one compartment is required, the other compartment can be switched off to save energy.

Switching off a compartment
If the display of the compartment shows a temperature, you can switch off the compartment as follows:

1. Press the “SET” button (fig. 3 5, page 5):
2. Once for the large compartment
3. Twice for the small compartment
4. The display of the respective compartment blinks.
5. Press the “ON/OFF” button (fig. 3 1, page 5).
   “OFF” flashes for five seconds on the display of the respective cooling compartment, then “OFF” is displayed.

Switching on a compartment
If the display of the compartment shows “OFF”, you can switch on the compartment as follows:

1. Press the “SET” button (fig. 3 5, page 5):
2. Once for the large compartment
3. Twice for the small compartment
4. The display of the respective compartment blinks.
5. Press the “ON/OFF” button (fig. 3 1, page 5).
   The cooling temperature appears in the display for a few seconds. The dis-play flashes several times and then the current temperature is displayed.

Setting the display brightness
The display brightness can be dimmed for low ambient light conditions. To set the dimming level of the display proceed as follows:

1. Switch on the cooler.
2. ICF18,ICF32, ICF40, ICF60: Press the “SET” button (fig. 3 5, page 5) four times.
3. ICF80DZ: Press the “SET” button (fig. 3 5, page 5) five times.
4. Use the “UP +” (fig. 3 7, page 5) or “DOWN –” (fig. 3 6, page 5) buttons to set the brightness of the display.

• Display will be as follows: d0 (default), d1 (medium), d2 (dark)
• The display shows the set mode for several seconds. The display flashes twice before it returns to the current temperature.

NOTE

• The factory setting of brightness of the display is d0 (default).
• If a fault occurs, the brightness automatically reverts to brightness d0 (default). After troubleshooting the set brightness is reactivated.

Switching off the cooler

1. Empty the cooler.
2. Switch the cooler off.
3. Pull out the connection cable.

If you do not want to use the cooler for a longer period of time:
Leave the lid slightly open. This prevents odor build-up.

Defrosting the cooler
Humidity can form frost in the interior of the cooler or on the evaporator. This reduces the cooling capacity.

NOTICE! Damage hazard
Never use hard or pointed tools to remove ice or to loosen objects which have frozen in place.

To defrost the cooler, proceed as follows:

1. Take out the contents of the cooler.
2. If necessary, place them in another cooling device to keep them cool.
3. Switch off the device.
4. Leave the lid open.
5. Wipe off the defrosted water.

Replacing the AC fuse

DANGER! Electrocution hazard
Failure to obey this warning will result in death or serious injury. Disconnect the power supply and the connection cable before you replace the device fuse.

1. Disconnect the power supply to the device.
2. Remove the connection cable.
3. Pry out the fuse insert (fig. 4 2, page 5) with a screwdriver.
4. Replace the defective glass fuse with a new one that has the same type and rating (4 A, 250 V).
5. Press the fuse insert back into the housing.
6. Reconnect the power supply to the device.

Replacing the device DC fuse

1. Disconnect the power supply to the device.
2. Pry out the fuse cover (fig. 4 3, page 5) to access the fuse.
3. Reverse the fuse cover and use the hook to remove the fuse.
4. Replace the defective fuse with a new fuse of the same type (Automotive Standard blade fuse, 10 A).
5. Re-fit the fuse cover.
6. Reconnect the power supply to the device.

Replacing the DC plug fuse

• Replace the DC plug fuse as shown in fig. 6, page 7.
• Disconnect the power supply to the cooler.
• Pull the adapter sleeve (A2) off the plug.
• Unscrew the screw from the upper part of the housing (A1).
• Remove the upper part of the housing from the lower part of the housing (B1).
• Take out the contact pin (B2).
• Replace the defective fuse (C2) with a new fuse of the same type and rating (8A 32V).
• Reassemble the plug in the reverse order.

Replacing the light PCB

• NOTICE! Damage hazard
• The lamp can only be replaced by the manufacturer, a service agent or similarly qualified person to avoid hazard.

Cleaning and maintenance

WARNING! Electrocution hazard
Failure to obey this warning could result in death or serious injury. Always disconnect the device from the power supply before you clean and service it.

• NOTICE! Damage hazard
  • Never clean the cooling device under running water or in dish water.
  • Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the cooling device.
• Occasionally clean the cooling device interior and exterior with a damp cloth.
• Ensure that the air inlet and outlet vents on the cooling device are free of any dust and dirt, so that heat can be released and the cooling device is not damaged.

Troubleshooting

supplied to the DC power outlet.
| |
| |
| One of the device fuses is defective.| Replace the defective device fuse, see chapter “Replacing the device DC fuse” on page 23.
| |
The device does not cool (plug is inserted, “POWER” LED is lit).| Defective compressor.| This can only be repaired by an authorized repair center.
| |
The device does not cool (plug is inserted,| Battery monitor is set too high| Select a lower battery monitor setting.
| |

Warranty

1. Igloo Products Corp. warrants the ICF to be free from defects in material or workmanship under normal use and service for 1 year from the date of original purchase. This warranty is your exclusive warranty and there are no warranties which extend beyond the description on the face hereof. Igloo®, in its discretion, shall either repair the product free of charge or provide you with a replacement product if the product proves defective under the terms of this warranty. The warranty is valid for the original retail purchaser and is not transferable. Dealers, service centers, or retail stores do not have the right to change the terms and conditions of the warranty. Igloo is not responsible for incidental or consequential damage resulting from any malfunction. The warranty shall not apply to any unit, or component thereof, which is not returned as stated below and/or which has been:
2. damaged through abuse, misuse or neglect,
3. damaged in an accident,
4. used for any purpose not expressly stated in this manual,
5. repaired or altered in any way, including electronic changes from its original configuration.
6. The product is designed for a 12-volt DC vehicle system and household 110/120-volt (U.S. and Canada) or 220/240- volt (Europe) AC Systems. Any implied warranties including the implied warranty of merchantability are also limited to duration of 1 year from the original purchase date.

NOTE

• Please carefully review the care instructions for proper use and care of the product.
• Please visit our website at IglooCoolers.com for more information.

How to obtain warranty service:

• Do not return product to the place of purchase. If this product fails due to defects in material or workmanship, you must submit a claim as follows:
  • Visit our website at IglooCoolers.com for instructions on return of product.

NOTE
In order to obtain warranty performance, you must return the product, including any components or accessories, as instructed by consumer service, along with proof of purchase and a brief description of the nature of the defect.

Disposal
Recycling products with non-replaceable batteries, rechargeable batteries, or light sources

• Dispose the product in accordance with all applicable regulations.
• The product can be disposed free of charge.

Recycling packaging material
Place the packaging material in the appropriate recycling waste bins wherever possible.

Technical data

| ICF18| ICF32| ICF40
---|---|---|---
Total volume| 19 l| 32 l| 39 l
Connection volt- age| 12/24 Vg 100 to 240 Vw
Rated current| 12 Vg : 4.5 A

24 Vg : 2.1 A

100 Vw : 1 A

240 Vw : 0.5 A

| 12 Vg : 5.1 A

24 Vg : 2.5 A

100 Vw : 1.1 A

240 Vw : 0.54 A

| 12 Vg : 6 A

24 Vg : 2.6 A

100 Vw : 1.12 A

240 Vw : 0.6 A

Cooling capac- ity| -18 °C to +20 °C (0 °F to +68 °F)
Climate class| N, T
Ambient tem- perature| +16 °C to +43 °C (+60 °F to +110 °F)
Refrigerant| R134a
Refrigerant vol- ume| 20 g| 26 g| 30 g
CO2 equivalent| 0.029 t| 0.037 t| 0.043 t
Global warming potential (GWP)| 1430
Dimensions (W xD x H)(handle up)(W xD x H)(handle down)| 500 x 300 x 523 mm

**** 500 x 329 x 422 mm

| 616 x 374 x 452 mm

**** 616 x 374 x 393 mm

| 616 x 374x 520 mm

**** 616 x 374 x 461 mm

Weight| 10.5 kg| 12.3 kg| 12.6 kg
| ICF60| ICF80DZ
---|---|---
Total volume| 59 l| 78l (44 l/34 l)
Connection voltage| 12/24 Vg 100 to 240 Vw
Rated current| 12 Vg : 6.1 A

24 Vg : 2.9 A

100 Vw : 1.28 A

240 Vw : 0.6 A

| 12 Vg : 7.3 A

24 Vg : 3.4 A

100 Vw : 1.49 A

240 Vw : 0.63 A

Cooling capacity| -18 °C to +20 °C (0 °F to +68 °F)
Climate class| N, T
Ambient temperature| +16 °C to +43 °C (+60 °F to +110 °F)
Refrigerant| R134a
Refrigerant volume| 34 g| 34 g
CO2 equivalent| 0.049 t| 0.049 t
Global warming potential (GWP)| 1430
Dimensions (W x D x H) (handle up) (W x D x H) (handle down)| 721 x 442 x 530 mm

721 x 442 x 471 mm

| 874 x 447 x 556 mm

874 x 447 x 495 mm

Weight:| 15.2 kg| 20.0 kg

NOTE
If the ambient temperature is above +32 °C (+90 °F), the minimum temperature cannot be attained.

• Follow EPA use conditions.
• This product contains fluorinated greenhouse gases.
• The cooling unit is hermetically sealed.

igloocoolers.com
YOUR LOCAL SUPPORT
igloocoolers.com/contact-us

A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of SE-17154 Solna
DOMETIC GROUP AB Hemvarnsgatan 15 SE-17154 Solna Sweden

References

• Igloo® | Making Coolers Since 1947

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>