HoverCam 695 Pillar Mobile Convertible Stand Instruction Manual
- June 17, 2024
- hovercam
Table of Contents
HoverCam 695 Pillar Mobile Convertible Stand
Product Information
Specifications
- Product Name: Mobile Convertible Stand
- Model: Pillar 695
- Support Email: support@thehovercam.com
- Support Phone Number: 866-201-2056
- Website: https://manual-hub.com/
Stand Assembly
- Place the base plate on a flat, level surface. Lock the wheels to prevent movement.
- Connect power from the base plate to the motorized height adjustable pillars as shown below.
- Align and dock the motorized height-adjustable pillars and the base plate.
- Securely bolt the two back plate assemblies to each side of the adjustable pillars using six screws on each side as shown below.
Assembly Instructions
- 2 PERSON ASSEMBLY
- TOOLS AND HARDWARE REQUIRED
- REMOTE CONTROL OPERATION
- BASE PLATE WITH CASTERS
- MOTORIZED PILLAR ASSEMBLIES
- BACK PLATE ASSEMBLY
- POWER CABLES
Stand Assembly
- Place the base plate on a flat, level surface. Lock the wheels to prevent movement.
- Connect power from the base plate to the motorized height adjustable pillars as shown below.
- Align and dock the motorized height adjustable pillars and the base plate.
- Use 8 M 5 screws to securely bolt the two assemblies together
- Use 12 M5 screws to securely attach the back plate assembly to the height adjustable pillars. Six screws on each side as shown below.
Back Plate Installation - Connect power to the back plate tilt mechanism by making the connections as shown below.
RANGE OF MOTION
Stand Operation
- Elevator motor
- Elevator motor
- Tilt motor
- AC Outlet (AC100-240V)
- AC In (AC100-240V)
- Down button
- Up button
- Tilt up button
- Tilt down button
SUPPORTS LARGE-SIZE PANELS
Supports panel sizes from 65″ to 86″
Service & Support
- For service and support, please submit a service ticket at the HoverCam Support center: https://thehovercam.desk.com/customer/portal/emails/new
- For support, please contact HoverCam at: 866-201-2056 or visit their website: https://www.thehovercam.com/
FAQ’s
How do I lock the wheels of the HoverCam 695 Pillar Mobile Convertible Stand?
Refer to the user manual for specific instructions on locking and unlocking the wheels. Usually, there will be locks or levers on the wheels that need to be engaged.
What is the range of motion for the stand?
Check the product specifications in the user manual or on the official website for details on height adjustments, tilting angles, and swivel capabilities.
What panel sizes are supported by the HoverCam 695 Pillar Mobile Convertible Stand?
Look for information in the product specifications to determine the supported panel sizes or devices that can be used with the stand.
Where can I get service and support for the HoverCam 695 Pillar Mobile Convertible Stand?
Visit the HoverCam website or contact their customer support for assistance. They may provide contact information, including helpline numbers or email addresses.
Are there any troubleshooting tips for common issues with the stand?
Check the user manual or FAQ section on the HoverCam website for troubleshooting tips for issues such as connectivity problems or stability concerns.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>