buddi SB2 Smart Beacon User Manual

buddi SB2 Smart Beacon

Product Information

Specifications

• Product Name: Smart Beacon v2.2
• Version: 1.0
• Date: 28/06/2023

Introduction
This document serves as the user manual for the Smart Beacon v2.2. It provides instructions on the physical features, correct installation, and removal of the product. Please note that electronic configuration and online monitoring portal interaction are not covered in this manual.

Equipment Description
The Smart Beacon v2.2 is a compact device designed for use in domestic settings. It does not require permanent fixing and can be securely placed on tables, work surfaces, or the floor.

Installation
The Smart Beacon v2.2 needs to be connected to a mains power supply for continuous operation. However, it also has battery backup in case of power failure. When connected to mains power, the display will not show a plug symbol. When the power is removed, a plug symbol will appear on the display. It is important not to install the Smart Beacon v2.2 in areas with high temperatures, such as near open flames or heat-emitting equipment.To avoid interference with nearby appliances, do not place the Smart Beacon v2.2 near a TV, microwave oven, or VCR. If the device causes harmful interference to radio or television reception, please take appropriate measures.

Operation
The Smart Beacon v2.2 communicates over 2G/3G/4G networks to a server-based monitoring platform. The platform interprets the data provided by the beacon and populates a web portal user interface. The data sets include various parameters related to the device’s functionality.

Product Usage Instructions

Collection
To collect the Smart Beacon v2.2, follow these steps:

1. Ensure the device is not connected to a power supply.
2. Gently lift the beacon from its current location.

Inspection
To inspect the Smart Beacon v2.2, perform the following:

1. Check the exterior for any physical damage.
2. Ensure all buttons and ports are in proper working condition.
3. If any issues are found, refer to the troubleshooting section of this manual or contact customer support.

Cleaning
To clean the Smart Beacon v2.2, follow these guidelines:

1. Power off and unplug the device.
2. Use a soft, dry cloth to gently wipe the exterior surface.
3. Avoid using any cleaning agents or abrasive materials.

FAQ

Q: Can I install the Smart Beacon v2.2 near heat-emitting equipment?
A: No, it is not recommended to install the Smart Beacon v2.2 in places with high temperatures, such as near open flames or heat-emitting equipment.

Q: What should I do if the Smart Beacon v2.2 interferes with my TV or other appliances?
A: If the Smart Beacon v2.2 causes harmful interference to radio or television reception, please ensure that it is not placed near a TV, microwave oven, or VCR. If the issue persists, contact customer support for further assistance.

User Manual-Smart Beacon User Manual

• Version : 1.0
• Date : 28/06/2023
• Page : 1 of 7

COMMERCIAL IN CONFIDENCE
The material contained in this document may not be copied, published, transmitted, reproduced or disclosed, in whole or in part without the prior written permission of buddi Ltd.

DOCUMENT HISTORY

REFERENCED DOCUMENTS

Introduction

This document is intended to be the source reference material for using the Smart Beacon v2.2 product, with the exception of electronic configuration (including set-up and interaction with the online monitoring portal). The emphasis here is upon
describing the physical features, correct installation and removal etc.

Equipment Description

The Smart Beacon v2.2 is a multi-function RF Beacon to be used in conjunction with the Smart Tag device as an optional accessory. In addition to providing an intelligent link to the Smart Tag, the unit also provides a method of direct communication with the subject via text messages to the display, or two-way voice communication which can be initiated in either direction. The call function can be configured to allow the subject to call one or more pre- defined numbers, such as the monitoring centre, or an SOS number such as ‘999’

Smart Beacon v2.2 Installation

The Smart Beacon v2.2 is designed to sit discreetly in any domestic setting, with no permanent fixing necessary it should sit securely on any table, work surface or floor. The Smart Beacon v2.2 will require a permanent connection to a mains power supply, however battery back-up is provided in the event of mains power failure. When the unit is plugged into a mains power supply the display will not show a symbol of a plug. When the power is removed a symbol of a plug will appear on the display. The Smart Beacon V2.2 should not be installed this equipment in a place where it will be exposed to high temperatures, such as near an open flame or heat-emitting equipment.To avoid interference to nearby appliances, do not place the Smart Beacon V2.2 on or
near a TV, microwave oven, or VCR. If this Smart Beacon V2.2 does cause harmful interference to radio or television reception.

Smart Beacon v2.2 Operation

The Smart Beacon v2.2 communicates over 2G/3G/4G to a server-based monitoring platform, which interprets the data provided to populate a web portal user interface. The data sets include the following: surface marking which may be indicative of the unit being exposed to high impacts or tampering. Areas that require special attention are;

FCC warning statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

ISED Statement

This device complies with ISED’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment for portable use. End users must follow the specific operating instructions for satisfying RF exposure compliance. No changes shall be made to the equipment without the manufacturer’s permission as this may void the user’s authority to operate the equipment.

buddi Ltd 2023 Talbot House, 17 Church Street, Rickmansworth, Hertfordshire WD3 1DE. COMMERCIAL IN CONFIDENCE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>