PUQU Q1 Label Printer User Guide

PUQU Q1 Label Printer

PACKING LIST

SAFETY INSTRUCTIONS

THIS PRODUCT IS NOT EQUIPPED WITH A STANDARD POWER ADAPTER. PLEASE BE SURE TO USE 3C CERTIFICATION AND MEET THE STANDARD REQUIREMENTS.

DIMENSION STANDARD

FRONT SIDE

REVERSE SIDE

EQUIPMENT PARAMETERS

• PRINT METHOD
  Thermal printing

• PRINT SPEED
  20-50mm/s

• DOT EACH ROW
  84 dot/line

• PRINT WIDTH
  48mm

• PRINT INTERFACE
  Bluetooth + USB

• CONNECTION MODE
  Android & iOS & PC

• POWER ACCESS
  DC 5V/1A

• PAPER ROLL DIAMETER
  38mm

• PAPER THICKNESS
  0.06~0.08mm

• BARCODE TYPE
  Barcode/QRcode

COMPONENT DESCRIPTION

1. Cover opening handle
2. Right baffle
3. Circular button
4. USB interface
5. Left baffle
6. Paper storage

Maintenance Tips

• We recommend you to charge regularly to prevent battery aging if the machine is not used for a long time.
• It is recommended to clean and maintain the print head regularly.
• Use a cotton swab dipped in alcohol to wipe the print head and prolong its service life.

PAPER ROLL INSTALLATION

1. Step 1
   Please gently pull the cover opening handle to open the paper storage

2. Step 2
   Please put the paper roll to the right, slide the right baffle to align with the edge (the baffle buckle unlocks upwards)

3. Step 3
   Please push down the baffle buckle to lock the position of the baffle

4. Step 4
   Please fasten the cover down and press the paper head.

Press on the button feeding test

MENU SETTING

The only button (circular button) for this series of models is located on the bottom half-centered

1. Power Off State
   Press the button, the indicator light comes on, enter the initial state, and the printer is ready to print.

2. Power On State
   Click once to automatically feed one paper

3. Power On State
   Long press (hold for about 3 seconds or more) to enter the Power Off state, the indicator light off

4. Power On State
   When opening the paper storage, it will sound once and the indicator light will change, when closing the paper storage, it will automatically feed one paper

APP CONNECTION

PRECONDITIONS

STEPS OF CONNECTION
Click on the connection button from the setting interface or click the print icon in the upper right corner of the home page.

APP PRINTING

Note : There may be slight changes following firmware upgrades

PUQULABEL.COM

NOTE:

• Thank you very much for ordering our PUQU products. In order to better serve our customers, we have a dedicated customer service team to coordinate any issues. If you cannot receive a verification code when registering for QU PRINTING, please contact our customer service representative to register.
• The email address is: service.int@puqulabel.com Or puqu1773@hotmail.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>