Godox QTII Series Amazing Fast Speed and Multi Freeze Flash Instruction Manual

Godox QTII Series Amazing Fast Speed and Multi Freeze Flash

Product Information

Specifications

• Model: QT400IIM, QT600IIM
• Series: QTII Series
• Power: 400WS, 600WS
• Color Temperature: 5400K~9500K (QT600IIM), 4600K~5000K (QT400IIM)
• Flash Duration: 1/190 – 1/28984 (220V), 1/192 – 1/22988 (110V)
• Power Range: 0.05-0.9 (QT600IIM), 0.05-0.7 (QT400IIM)
• Sync Mode: M/Multi/Hss
• Wireless Control: 2.4G Radio Transmission
• Modeling Lamp Power: 150W

Product Usage Instructions

Flash Preparation
To prepare the flash for use, follow these steps:

1. Ensure the camera and camera flash’s power switches are turned on.
2. Connect the sync cord to the sync cord jack on the flash and the camera.
3. Insert the power cord into the AC power socket and connect it to a power source.
4. Attach the desired accessory, such as the standard reflector or glass protection cover, to the flash.

M: Manual Flash
To use the flash in manual mode, follow these steps:

1. Set the desired flash power using the select dial.
2. Adjust the light brightness of the modeling lamp using the MOD/OFF button.
3. Press the test button to trigger the flash and check the output.

High-Speed Sync
To use the flash in high-speed sync mode, follow these steps:

1. Select the HSS mode on the LCD panel.
2. Set the desired flash power and adjust the light brightness of the modeling lamp.
3. Ensure your camera is set to high-speed sync mode.
4. Take photos with a shutter speed faster than the camera’s sync speed.

Multi: Stroboscopic Flash
To use the flash in stroboscopic flash mode, follow these steps:

1. Select the Multi mode on the LCD panel.
2. Set the desired flash power and adjust the light brightness of the modeling lamp.
3. Set the number of flashes and frequency using the settings on the LCD panel.
4. Trigger the flash to capture multiple images in succession.

Wireless Flash Shooting: Radio (2.4G) Transmission
To use the flash wirelessly using radio transmission, follow these steps:

1. Set the flash to wireless mode on the LCD panel.
2. Set the communication channel and group using the GR/CH and MODE buttons.
3. Ensure your camera is set to wireless flash mode.
4. Trigger the flash wirelessly to capture photos.

FAQ

1. Q: Where can I find the product manual?
   A: The product manual can be found on the official website at <https ://manual-hub.com/>.

2. Q: What accessories are included with the product?
   A: The product includes the following accessories:

   • Sync Cord
   • Power Cord
   • Standard Reflector
   • Lamp Cover
   • Glass Protection Cover
   • Modeling Lamp
   • Instruction Manual

3. Q: How do I replace the tube?
   A: To replace the tube, please refer to the “Tube Replacement” section in the product manual.

| QT600IIM| QT400IIM
---|---|---
| M/Multi/Hss
1/1 (m ISO 100，| 76| 65
(t0.1)|  (speed)| 1/316 － 1/28984 (220V);| 1/416 － 1/35086 (220V);
1/190 － 1/19606 (110V);| 1/192 － 1/22988 (110V);
| 1/316 － 1/4246 (220V);| 1/416 － 1/4938 (220V);
1/190－ 1/3766(110V);| 1/192－ 1/3702 (110V);
| | 5600±200K| 5600±200K
 (speed)| 5400K~9500K| 5400K~9500K
| 4600K~5000K| 4600K~5000K
POWER| 600WS| 400WS
| 0.05-0.9| 0.05-0.7
| M| 1/128~1/1
Hss| 1/16~1/1
Multi| 1/128~1/8
| 30
| 1/8000
| 0.01~30
(MASK)| √
| √
| √
Model ****| 150W
| S1/S2
| √
| LCD
| ON/OFF
| 16 :0~9,A,B,C,D,E,F
| 50m
| 32 :1~32
| 6.35mm
| Φ14CM,23CM, 41CM
| 2.96KG

Foreword

Thank you for purchasing a GODOX product.
Thanks for choosing QTII series high-speed flash. It has wide-range applicability, not only perfect for all kinds of studio and workshop photography, but also good at capturing fast-changing actions in a chain of pictures in high-speed continuous shooting e.g. action photography, stage photography, sports photography, scientific photography, etc. In addition, in fashion or portrait photography, photographers can capture a series of fast- changing facial expressions and amazing moves, and clearly freeze each fleetingly perfect instant into eternal beauty.

Among the benefits you’ll enjoy:

• Ultra-speedy charging, 0.05-0.9s recycling time
• Multi-freeze shots, flash duration(t0.1) in high-speed (speed) mode can up to:
  • 220V 600W: 1/ 28984S
  • 220V 400W: 1/ 35086S
  • 110V 600W: 1/ 19606S
  • 110V 400W: 1/ 22988S
• Achieving 1/8000s high-speed sync (with high-speed trigger e.g. X1)
• Up to 10 shots in one second under high-speed continuous shooting
• Exact output control on LED display from 1/128 to 1/1
• High qualified modeling lamp, 150W output adjustable for 20 steps
• Outstanding output stability, less than 2% shifts when under the same output
• High color stability, ranging within ±200k (stable mode) between flashes over the entire power range
• Built-in X1 system (2.4G transmission)
• S1/S2 Optical slave triggering
• Delay function
• Mask function
• High qualified LCD panel

Warning
To prevent damage to the product or injury to you or to others, read the following warnings in their entirety before using this product. Keep these Warning where users can read them for ready reference.

• Do not disassemble or modify. Should the product break down, send the defective back to the authorized service center for inspection and maintenance.
• Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.
• Keep out of reach of children.
• Please put the device in a ventilation environment and keep the parts of lighting and heat dissipation holes are unobstructed. Do not use in flammable environment.
• As this product adopts make and break device, please keep it easy to be used.
• No touching the heating parts of this product.
• Please turn off the power and wear insulated gloves before installing and connecting accessories. When replacing the tube or modeling lamp, please make sure that the tube is cool and wear insulated gloves to prevent burns.
• Do not flash directly towards naked eyes (especially those of babies), otherwise it may lead to visual impairment.
• Disconnect from the power supply when it will not be used for an extended period.

Caution

• After 30 continuous flashes at full power, the flash should be cooled down for about 3 minutes. Overheating will occur if it is used continuously without cooling down.
• Do not keep using the modeling lamp for a long time; otherwise flammable accessories attaching to flash head, e.g. soft box will get burnt. A 10-minute time is recommended in this case. After 10 minutes, cool it down for 1 minute.
• When using a snoot, do not keep the modeling lamp on for a long time or fire too frequently (not over six times for one minute). Overheating will result in damages for strobe housing and/or studio light.
• Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.

Conventions used in this Manual

• This manual is based on the assumption that both the camera and camera flash’s power switches are powered on.
• Reference page numbers are indicated by “p.**”.
• The following alert symbols are used in this manual:
  • The Caution symbol indicates a warning to prevent shooting problem.
  • The Note symbol gives supplemental information.

Name of Parts

Body:

LCD Panel:

Accessories

1. Sync Cord ,Power Cord
2. Standard Reflector
3. Lamp Cover
4. Glass Protection Cover
5. Modeling Lamp
6. Instruction Manual

Separately Sold Accessories
The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects:
X1 TTL Flash Trigger, Power Inverter, Soft box, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.

Operations

Flash Preparation

1. Take down the lamp cover. Install the modeling lamp and put on the glass protection cover and the standard reflector. (To uninstall the standard reflector, press the orange release button on the flash head and turn the standard reflector counter-clockwise to take it out, as illustrated in the picture.)
2. Attach the flash unit on an appropriate light stand. Adjust the mounting bracket for a good angle and make sure it’s tightened and fixed. Use the direction adjusting handle to adjust the flash on a desired direction. Umbrella input is for different photo umbrellas to put in.

M: Manual Flash

The flash output is adjustable from 1/1 full power to 1/128th power in 0.1 stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output.

1. Press button so that is displayed.
2. Turn the Select Dial to choose a desired flash output amount.

Display Flash Duration
Flash duration refers to the length of time that from flash’s firing to reach the half peak at maximum. The half peak at maximum is usually expressed as t=0.5. In order to provide the photographer with more concrete data, this product adopts t=0.1. The difference between t=0.5 and t=0.1 is shown in the following picture.

• Flash duration will only be displayed in the M mode.

Stable Color Temperature Mode and High-Speed Flash (speed) Mode

Stable Color Temperature Mode or High-Speed Flash (speed) Mode can be chosen in the C.Fn-F1 setting. These two modes are effective in M/Multi mode and ineffective in high-speed sync mode.
Stable Color Temperature Mode: color temperature ranges within ±200K, which is a good choice for the photographers who pursues stable color temperature.
High-Speed Flash (speed) Mode: the max flash duration is up to t0.1=1/28984, which is perfect for capturing the fast-changing actions. As the color temperature is a little higher in this mode, please set the camera’s white balance parameter to the proportional color temperature amount (see the chart below) or AWB (Auto White Balance).

220V QT600IIM Prototype Test

Test Environment| Darkroom
Color Temperature Test| Equipment| SEKONIC C-700
Testing Method| Trigger beyond 2 meters and average the amount of 3 tests.
Flash Duration (t0.1)| IGBT control the time of turning on the flash
Stable Color Temperature Mode| | High-Speed Flash (speed) Mode
Parameter Level| T Color Temperature CCT(K)| Flash Duration t0.1(S)| Parameter Level| T Color Temperature CCT(K)| Flash Duration t0.1(S)
1/128| 5729| 1/ 4246| 1/128| 9335| 1/ 28984
1/128+0.3| 5718| 1/ 4166| 1/128+0.3| 9108| 1/ 26666
1/128+0.7| 5686| 1/ 3920| 1/128+0.7| 9010| 1/ 24690
1/64| 5619| 1/ 3920| 1/64| 8535| 1/ 22988
1/64+0.3| 5635| 1/ 3920| 1/64+0.3| 8205| 1/ 20832
1/64+0.7| 5657| 1/ 3920| 1/64+0.7| 7698| 1/ 18518
1/32| 5630| 1/ 3920| 1/32| 7367| 1/ 16666
1/32+0.3| 5639| 1/ 3920| 1/32+0.3| 7151| 1/ 15150
1/32+0.7| 5608| 1/ 3702| 1/32+0.7| 6856| 1/ 13332
1/16| 5620| 1/ 3702| 1/16| 6579| 1/ 11904
1/16+0.3| 5647| 1/ 3702| 1/16+0.3| 6440| 1/ 10582
1/16+0.7| 5657| 1/ 3702| 1/16+0.7| 6216| 1/ 8888
1/8| 5677| 1/ 3702| 1/8| 6126| 1/ 7662
1/8+0.3| 5674| 1/ 3508| 1/8+0.3| 6072| 1/ 6666
1/8+0.7| 5610| 1/ 2666| 1/8+0.7| 5954| 1/ 5332
1/4| 5568| 1/ 2298| 1/4| 5907| 1/ 4596
1/4+0.3| 5566| 1/ 1904| 1/4+0.3| 5867| 1/ 3808
1/4+0.7| 5656| 1/ 1626| 1/4+0.7| 5837| 1/ 2898
1/2| 5646| 1/ 1332| 1/2| 5844| 1/ 2222
1/2+0.3| 5681| 1/ 1256| 1/2+0.3| 5738| 1/ 1550
1/2+0.7| 5649| 1/ 832| 1/2+0.7| 5636| 1/ 832
1/1| 5549| 1/ 316| 1/1| 5539| 1/ 316
220V QT400IIM Prototype Test

Test Environment| Darkroom
Color Temperature Test| Equipment| SEKONIC C-700
Testing Method| Trigger beyond 2 meters and average the amount of 3 tests.
Flash Duration (t0.1)| IGBT control the time of turning on the flash
Stable Color Temperature Mode| | High-Speed Flash (speed) Mode
Parameter Level| T Color Temperature CCT(K)| Flash Duration t0.1(S)| Parameter Level| T Color Temperature CCT(K)| Flash Duration t0.1(S)
1/128| 5744| 1/ 4938| 1/128| 9323| 1/ 35086
1/128+0.3| 5759| 1/ 4694| 1/128+0.3| 9277| 1/ 33332
1/128+0.7| 5747| 1/ 4444| 1/128+0.7| 9130| 1/ 30302
1/64| 5761| 1/ 4444| 1/64| 8919| 1/ 27776
1/64+0.3| 5775| 1/ 4444| 1/64+0.3| 8926| 1/ 25640
1/64+0.7| 5780| 1/ 4444| 1/64+0.7| 8836| 1/ 22222
1/32| 5753| 1/ 4444| 1/32| 8432| 1/ 20202
1/32+0.3| 5771| 1/ 4444| 1/32+0.3| 8183| 1/ 18518
1/32+0.7| 5754| 1/ 4444| 1/32+0.7| 7784| 1/ 16666
1/16| 5764| 1/ 4444| 1/16| 7368| 1/ 15150
1/16+0.3| 5752| 1/ 4444| 1/16+0.3| 6983| 1/ 13332
1/16+0.7| 5755| 1/ 4444| 1/16+0.7| 6763| 1/ 11494
1/8| 5777| 1/ 4444| 1/8| 6533| 1/ 10100
1/8+0.3| 5734| 1/ 3920| 1/8+0.3| 6377| 1/ 8546
1/8+0.7| 5665| 1/ 3030| 1/8+0.7| 6192| 1/ 6872
1/4| 5604| 1/ 2468| 1/4| 6061| 1/ 5648
1/4+0.3| 5621| 1/ 2468| 1/4+0.3| 5957| 1/ 4566
1/4+0.7| 5626| 1/ 2222| 1/4+0.7| 5840| 1/ 3508
1/2| 5654| 1/ 2082| 1/2| 5962| 1/ 2656
1/2+0.3| 5672| 1/ 1514| 1/2+0.3| 5807| 1/ 2014
1/2+0.7| 5695| 1/ 1148| 1/2+0.7| 5711| 1/ 1148
1/1| 5595| 1/ 416| 1/1| 5579| 1/ 416

High-Speed Sync

In this mode, you can set the flash output from 1/1 full power to 1/16th power in 0.3 stop increments. High Speed Sync enables the flash to synchronize with all camera shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits.

1. Press the Button so that < > is displayed.
2. Turn the Select Dial to set the flash output power.
3. Please use the transmitter of X1 series.
   • With high-speed sync, the faster the shutter speed, the shorter the effective flash range.
   • Multi flash mode cannot be set in high-speed sync mode.
   • With high-speed sync, the color temperature is lower (decrease around 700K) because of tube’s characteristics. Please set the camera to AWB (Auto White Balance).

Multi: Stroboscopic Flash

In this mode, you can set the flash output from 1/128th power to 1/8th power in 0.3 stop increments. With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output.

1. Press button so that is displayed.
2. Turn the Select Dial to choose a desired flash output.
3. Set the flash frequency and flash times.
   • Press Button to select the flash times. Turn the Select Dial to set the number.
   • Press Button to select the flash frequency. Turn the Select Dial to set the number.

Calculating the Shutter Speed
During stroboscopic flash, the shutter remains open until the firing stops. Use the formula below to calculate the shutter speed and set it with the camera.
Number of Flashes / Flash Frequency = Shutter Speed
For example, if the number of flashes is 10 and the firing frequency is 5 Hz, the shutter speed should be at least 2 seconds.

• Stroboscopic flash is most effective with a highly reflective subject against a dark background.
• Using a tripod and a remote control is recommended.
• A flash output of 1/1 and 1/2 cannot be set for stroboscopic flash.
• If the number of flashes is displayed as “–”, the firing will continue until the shutter closes or the battery is exhausted. The number of flashes will be limited as shown by the following table.

Maximum Stroboscopic Flashes:

Flash Output        Hz| 1| 2| 3| 4| 5| 6-7| 8-9| 10| 11| 12-14| 15-19| 20-30
---|---|---|---|---|---|---|---|---|---|---|---|---
1/8| 7| 6| 5| 4| 4| 3| 3| 2| 2| 2| 2| 2
1/16(+0.3.+0.7)| 14| 14| 12| 10| 8| 6| 5| 4| 4| 4| 4| 4
1/32(+0.3.+0.7)| 30| 30| 30| 20| 20| 20| 10| 8| 8| 8| 8| 8
1/64(+0.3.+0.7)| 60| 60| 60| 50| 50| 40| 30| 20| 20| 20| 18| 16
1/128(+0.3.+0.7)| 99| 99| 90| 80| 80| 70| 60| 50| 40| 40| 35| 30

Wireless Flash Shooting: Radio (2.4G) Transmission

QTII adopts built-in 2.4G wireless X system, which is perfectly compatible with other products of our company. Nikon cameras (using X1T-N, TT685N, etc.) and Canon cameras (using X1T-C, TT685C, etc.) can enjoy one or more QTII together.

• As a slave unit, QTII can be controlled by the master unit e.g. AD360II-C, AD360II-N, TT685C, TT685N, X1T-C, X1T-N, TT600, etc.

Wireless Settings
Press < > Wireless Button so that < > is displayed, entering the 2.4G wireless status now.

Setting the Communication Channel
If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The channel IDs of the master unit and the slave unit(s) must be set to the same.

1. Long press the <GR/CH> Button for 2 seconds until the channel IDs is blinking.
2. Turn the Select Dial to choose the channel from 1 to 32.
3. Press the Button to confirm.

Setting the Communication Group

1. Short press the <GR/CH> Button for 2 seconds until the group IDs is blinking.
2. Turn the Select Dial to choose the group from 0 to F.
3. Press the Button to confirm.

Slave Trigger Model

Optical S1 Secondary Unit Setting
In M manual flash mode, press <S1/S2> button so that this flash can function as an Optical S1 secondary flash with Optical sensor. With this function, the flash will fire synchronously when the main flash fires, the same effect as that by the use of radio triggers. This helps create multiple lighting effects.

Optical S2 Secondary Unit Setting
Press < S1/S2> button so that this flash can also function as an Optical S2 secondary flash with Optical sensor in M manual flash mode. This is useful when cameras have pre-flash function. With this function, the flash will ignore a single “pre flash” from the main flash and will only fire in response to the second, actual flash from the main unit.

Modeling Lamp

QTII has a 150W modeling lamp which offers 5% to 100% light adjustment and 2 long lighting modes.

Modeling Lamp’s ON/OFF and Settings:

1. When the modeling lamp is OFF, short press the Modeling Lamp Button to turn it on;
2. When the modeling lamp is ON, short press the Modeling Lamp Button to setting the light brightness. As the lighting amount is blinking, turn the Select Dial to choose.

Turn off the Modeling Lamp
Long press the Modeling Lamp Button for 2 seconds to turn it off.

Choose the Modeling Lamp’s Modes

1. Long press the C.Fn Custom Button for 2 seconds until Fn menu is displayed.
2. Press the SET Button to choose F4.
3. Turn the Select Dial to choose the Modes:
   ON: the modeling lamp will keep this status when triggering; OFF: the modeling lamp will turn off when triggering;

Buzz Function
The Buzz Button is used to decide whether there is sound reminder for ready flash after recharging. When the buzz indicator is displayed on the LCD panel, it means the sound reminder is turned on; if not dislayed, the sound reminder is turned off.

1. A “BI” sound will be heard when it’s fully charged.
2. A “BI” sound will be heard when the button and the select dial echo each other.

C.Fn Setting Custom Function

1. Long press the C.Fn Custom Button for 2 seconds until menu is displayed.
2. Press the Button to choose Fn function signs.
3. Turn the Select Dial to change the settings. Short press the C.Fn Custom Button to exit.

Custom Function Signs| Function| Setting No.| Settings & Description| Restrictions
---|---|---|---|---
F1| Choose high- speed flash| ON| High-Speed Flash (speed) Mode| M/Multi mode
OFF| Stable Color Temperature
F2| Delay flash| OFF, 0.01~30S| Trigger as second curtain| M/Multi mode
F3| Mask function| OFF| Mask function is off| M mode
N1| Mask function is on: when setting 2 times’ triggering as a period, the first triggering will fire a flash.
N2| Mask function is on: when setting 2 times’ triggering as a period, the second triggering will fire a flash.
F4| Modeling lamp mode| ON| The modeling lamp will not change its status when triggering.| No
OFF| The modeling lamp will turn off when triggering.

Other Applications

Wireless Control Function
The flash unit is built in with a Wireless Control Port so that you can wirelessly adjust the power level of the flash and the flash triggering. To control the flash wirelessly, you need a FT-16 remote control set (on-camera and on-flash). Insert its receive end into the Wireless Control Port on the flash and insert the transmit end into the camera hot shoe. Settings made on the hot shoe-mounted transmit and receive ends will be wirelessly communicated to the flash. Then you can press the camera shutter release button to trigger the flash. You can also hold the transmit end at hand to control your off- camera flash.

• For full instructions on the use of FT series remote control, see its user manual.

Sync Triggering
The Sync Cord Jack is a Φ6.35mm plug. Insert a trigger plug here and the flash will be fired synchronously with the camera shutter.

Memory Function
The device is equipped with memory function for the panel setting. It will help remember the panel setting 3 second after you set it. When starting up the flash next time, the panel setting will be the same as the status before powering it off.

Tube Replacement
Shut down the power and remove the power cord before replacing the flash tube and wear insulated gloves. Then, loosen the iron wire on the tube, keep a balanced hold on the two feet of the flash tube and pull out the old tube gently. Take down the feet casing from the old tube and put it on the new one. Hold two feet of the new tube, and target directly towards the two copper outlets, then push them slightly in. Twine the iron wire on the stainless steel sheet to fix the flash tube.

Technical Data

(220V)
1/190s － 1/3766s (110V)| 1/192s － 1/3702s (110V)
Color Temperature| Stable Color Temperature Mode| 5600±200K| 5600±200K
High-Speed Flash (speed) Mode| 5400K~9500K| 5400K~9500K
High-Speed Sync Flash (speed) Mode| 4600K~5000K| 4600K~5000K
POWER| 600WS| 400WS
Recycle Time| Approx. 0.05-0.9s| Approx. 0.05-0.7s
Output Level| M| 1/128~1/1
Hss| 1/16~1/1
Multi| 1/128~1/8
Multi Flash| Yes (max. flash time: 99; max. flash frequency: 30)
Sync Mode| High-speed sync (up to 1/8000s), first curtain sync, second curtain sync
Delay Flash| 0.01~30s
MASK Function| ✓
Fan| ✓
Beeper| ✓
Modeling lamp| 150W
Slave Trigger Model| S1/S2
Display Flash Duration| ✓
Display| High qualified LCD panel
•  Radio (2.4G) Transmission (X system)
Wireless Function| Slave unit, ON/OFF
Controllable Slave Units| 16 groups: 0~9，A,B,C,D,E,F
Transmission Range (approx.)| 50m
Channel| 32: 1~32
Sync Triggering Mode| 6.35mm sync cord jack, wireless control port, built-in 2.4G wireless transmission
Dimension| Flash diameter 14CM, height of flash with handle 23CM, length of flash with lamp cover 41CM
Net Weight| Approx. 2.96Kg

Maintenance

• Shut down the device immediately when it works abnormally and find out the reason.
• Avoid sudden impacts and the lamp should be dedusted usually.
• It’s normal for lamp being warm when in use. Avoid continuous flashes when it is not necessary.
• Maintenance of all the flashes is up to our authorized maintenance department which can provide original accessories. Users can replace the flash tube and modeling lamp provided by the manufacturer.
• One year warranty period will be cancelled when any unauthorized maintenance is found.
• If the product had failures or was wetted, it can be continuously used only after it is repaired by professionals.
• Disconnect the power when doing maintenance work or cleaning.
• New changes made to the specifications or designs may not be updated in this manual.

GODOX Photo Equipment Co., Ltd.
Add: 1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com
http://www.godox.com
Made In China
705-QT62M0-03

References

• GODOX Photo Equipment Co.,Ltd.
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>