TROLINK Infrared 24-Key Controller Adopts Advanced Micro-Control Unit Instructions
- June 6, 2024
- TROLINK
Table of Contents
TROLINK Infrared 24-Key Controller Adopts Advanced Micro-Control
Outline
Infrared 24-key controller adopts advanced micro-control unit, used to control all kinds of lamps with LED as light source, such as: LED light bar, LED module, LED light box, luminous characters, etc.; it has low price, convenient wiring and simple use And other advantages; with memory storage function, static brightness adjustment, static color selection, dynamic speed adjustment and other lighting effects can be carried out through the infrared remote control.
Specifications
| Name | Specification | Product Picture |
|---|---|---|
| Work Temperature | -20-60℃ | 
InputVoltage| DC5V-12V-24V
Output Circuit| 3Circuits
Output Current| ≦6A
OutputPower| 72w
Connection Method| Common-Anode
Product Size| L63.5xW23.6xH11.5mm
Remote ControlSize| L51.5xW84.5xH7mm
Package Dimensions| L200xW120mm
Carton Size| L420xW340x350mm
Dimensions
Controller
Remote control
The key functions are as follows:
RGB brightness+/ Dynamic mode speed+| RGB brightness-/ Dynamic mode
speed-| Shut down| Boot up
---|---|---|---
Static red| Static green| Static blue| Static white
Static rose| Static turquoise| Static sapphire| Seven-color strobe
Static orange| Static cyan blue| Static purple gray| Seven-color jump
Static goose yellow| Static sky blue| Static sauce purple| Seven-color Breath
Static yellow| Static cyan| Static purple| Seven-color gradient
Application connection icon
Note:Connect the load line first, then the power line; make sure that there is no short circuit between the connecting lines before powering on.
Precautions
- The power supply voltage of this product is DC5V-12V-24V, and it must not be connected to other voltages
- The lead wires should be wired correctly according to the color and label provided in the wiring diagram;
- This product cannot be overloaded.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your
body.