Grizzly Industrial G9962Z Wide Belt Sander Instruction Manual

Grizzly Industrial G9962Z Wide Belt Sander

Product Information

The product models covered in this user manual are G0445, G0582, G9962Z, and G9962ZX. These models have undergone some changes since the manual was printed in June 2006. The updated parts list for the electrical components is provided below. It is important to keep this update with the owner’s manual for future reference.

Electrical Parts List

P9962ZX8109 (G0445/G9962ZX/G0582)
8110V2| P9962ZX8110V2 (G0445/G9962ZX/G0582)
8111V2| P9962Z8111V2 (G9962Z)
8111| P9962ZX8111 (G0445/G9962ZX/G0582)
8112| P9962ZX8112 (G0445/G9962ZX/G0582)
8113V2| P9962Z8113V2
8113V2-1| P9962Z8113V2-1
8114| P9962Z8114 (G9962Z)
8135| P9962ZX8135 (G0445/G9962ZX/G0582)
8136| P9962ZX8136 (G0445/G9962ZX/G0582)

Main Electrical Panel and Controls Diagram

The diagram below shows the main electrical panel and controls for the G9962ZX model. Please refer to this diagram for understanding the layout and location of various components.

Product Usage Instructions

Safety Precautions

Before using the product, it is essential to read and understand the owner’s manual for your own safety. Familiarize yourself with all the safety precautions mentioned in the manual.

Installation

Follow the installation instructions provided in the owner’s manual to set up the product correctly. Ensure that all electrical connections are made according to the wiring diagram and comply with local electrical codes.

Operation

To operate the product:

1. Make sure the power supply is connected and turned on.
2. Check that all necessary switches and controls are in the correct position.
3. Follow the specific instructions for your desired operation, such as adjusting settings, selecting modes, or engaging the machine.
4. Monitor the product during operation and be aware of any abnormal sounds or indications.

Maintenance

Regular maintenance is crucial to keep the product in optimal condition. Refer to the maintenance section in the owner’s manual for detailed instructions on cleaning, lubricating, and inspecting various components. Follow the recommended maintenance schedule to ensure longevity and performance.

Troubleshooting

If you encounter any issues while using the product, refer to the troubleshooting guide in the owner’s manual. It provides step-by-step instructions to identify and resolve common problems. If you cannot resolve the issue, contact our Technical Support at 570-546-9663 or [email protected] for assistance.

Specifications

• Models: G0445, G0582, G9962Z, G9962ZX
• Power Supply: 220V (G9962Z), 440V (G0445/G9962ZX/G0582)
• Control Panel: P9962Z8107
• Amp Sensor: P9962Z8109 (G9962Z), P9962ZX8109 (G0445/G9962ZX/G0582)
• Transformer: P9962ZX8110V2 (G0445/G9962ZX/G0582)
• Contactors: P9962Z8111V2 (G9962Z), P9962ZX8111 (G0445/G9962ZX/G0582)
• Relays: P9962ZX8112 (G0445/G9962ZX/G0582), P9962Z8114 (G9962Z), P9962ZX8135 (G0445/G9962ZX/G0582), P9962ZX8136 (G0445/G9962ZX/G0582)

The following changes were recently made to this machine since the owner’s manual was printed:

• Obtained CSA certification meeting CSA C22.2 #105-1953 and UL 987-7th standards.
• Changed electrical system, including a new transformer, overload relay, terminal blocks, and wiring.
• Changed circuit requirements.
• Replaced oscillation diaphragm assembly with an air cylinder.

Note: At the top of each page is a note that indicates which page it replaces in the original manual. On the parts list, the new parts are designated with a “V2”.
Aside from this information, all other content in the owner’s manual applies and MUST be read and under-stood for your own safety. IMPORTANT: Keep this update with the owner’s manual for future refer-ence. For questions or help, contact our Tech Support at 570-546-9663 or [email protected].

Electrical Parts List

(Replaces Page 67)

Main Electrical Panel and Controls Diagram

Replaces Page 66

Upper Roller System Diagram

Replaces Page 62

Upper Roller System Parts List

Replaces Page 63

Belt Oscillation System Diagram

Replaces Page 68

Tool Box and Accessories Parts List

Tool Box and Accessories Parts List

Sanding Motor System Diagram

Sanding Motor System Parts List

Table Lift System Diagram

Table Lift System Parts List

Conveyor System Diagram

Conveyor System Parts List

Feed, Drum, and Pressure Roller Diagram

Feed, Drum, and Pressure Roller Parts List

Sanding Drum and Platen System Diagram

Sanding Drum, and Platen System Parts List

Upper Roller System Diagram

Upper Roller System Parts List

Cabinet Assembly Diagram

Cabinet Assembly Parts List

Main Electrical Panel and Controls Diagram

Main Electrical Panel and Controls Parts List

Belt Oscillation System Diagram

Belt Oscillation System Parts List

Label Diagram

WARNING

Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Grizzly at 800-523-4777 or www.grizzly.com to order new labels.

Labels List

Hardware Recognition Chart

WARRANTY & RETURNS

Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special, or consequential damages arising from the use of our products.
To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then issue you a “Return Number,” which must be clearly posted on the outside as well as the inside of the carton. We will not accept any item back without this number. Proof of purchase must accompany the merchandise.
The manufacturers reserve the right to change specifications at any time because they constantly strive to achieve better quality equipment. We make every effort to ensure that our products meet high quality and durability standards and we hope you never need to use this warranty.

Please feel free to write or call us if you have any questions about the machine or the manual. Thank you again for your business and continued support. We hope to serve you again soon.

FAQ

Q: Where can I find the wiring diagram for the product?

A: The wiring diagram is included in the owner’s manual. Please refer to the electrical section of the manual to locate the wiring diagram.

Q: How do I contact Technical Support?

A: You can reach our Technical Support team at 570-546-9663 or by sending an email to [email protected]. They will be happy to assist you with any product- related questions or issues.

References

• Shop Tools and Machinery at Grizzly.com - Grizzly Industrial
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>