little tikes 664526M8 Turtle Sandbox Instruction Manual

June 17, 2024
Little Tikes

little tikes 664526M8 Turtle Sandbox Instruction Manual
little tikes 664526M8 Turtle Sandbox

Thank you for choosing the Little Tikes© Turtle Sandbox. We strive to provide a durable, easy-to-assemble toy that’s made to last, giving your child years of imaginative, engaging fun!

Really important information you should know!

  • Read through all the instructions first.
  • Clear a flat surface to lay out all the materials so everything is close at hand.
  • You will need a Phillips head screwdriver (not included) to assemble the Turtle Sandbox.
    • When installing screws, be sure screws are tightened snugly, but do NOT OVER-TIGHTEN.
  • The parts are listed below – each part is identified with a letter in RED for easy reference.
  • Illustrations are for reference only. Styles may vary from actual contents.
  • If you have any questions, we’re here to help. Give our customer service team a call at 1-800- 321-0183.

WARNINGS!

  • Adult Assembly Required
  • Keep these instructions for future reference.
  • Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain sharp edges and sharp points. Keep away from children until assembled.
  • Adult supervision required. Do not leave children unattended.
  • Use this product on a firm, level surface and avoid using near swimming pools, on or near steps, hills or inclines.
  • Do not allow children to sit, stand, play or climb on the top surface. Failure to do so may cause the product to become unstable.
  • This product is intended for use by children ages 1-6 years.
  • Intended for use with the supplied accessories only.
  • Use only clean play sand and keep sand covered with lid when not in use.
  • Do not allow children to play inside with lid closed. Sufficient air may not be available for breathing. .
  • When temperatures fall below 0°F/-18°C, outdoor use of this product is not recommended. In extreme cold, plastic materials lose resilience and may become brittle and crack upon impact. Store product in a warmer, protected place.
  • Turtle sandbox holds over 100 lbs. (45 kg) play sand (not included.).

DISPOSAL

Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not limited to, small parts and sharp edges exist at the time equipment is discarded.

A Few Things Before You Start!

Tools Required (not included)
Tools Required

BEFORE you begin assembly, make sure you have all the parts listed below.

Some packages of hardware may have extras pieces.
Questions? We’re here to help. Little Tikes customer service team at 1-800-321-0183.

Shown actual size

A Turtle base (4 pieces)
Instruction
B Turtle lid (4 pieces)
Instruction
C Lid cap (1)

D Turtle head – top (1)
Instruction
E Turtle head – bottom (1)
Instruction
F Eye base (2)

G Eye center (2)

H Tether (1)
Instruction

Let’s get started!

Align 2 turtle bases (part A) the screw notch and clip and snap together.
Let’s get started

Let’s get started! – cont.

Align and attach a 3rd base (part A) onto the turtle base.
Be sure the pieces are snapped.
Let’s get started

Align and attach a 4th base (part A) onto the turtle base. Be sure the pieces are snapped.
Let’s get started

Secure using (4) 3/4″ (1.9cm) screws.
Let’s get started

Flip the assembled turtle base over and press together the interlocking seam.
Let’s get started

Time for a smile!

  1. Place the turtle head – BOTTOM (part   E) onto the turtle head – TOP (part D).
    Time for a smile

  2. Secure using (5) 3/4″ (1.9cm) screws.
    Time for a smile

  3. Insert eye center (G)  into an eye base (F).
    Time for a smile

  4. Press assembled eye into turtle head.
    Time for a smile

I need to see!

  1. Fit bottom of the turtle head onto the bottom of the base.
  2. SNAP the top of the turtle head onto the base.
    I need to see

4 1…2…3…now a lid!

Align and press together 1 turtle lid (part B) onto a 2nd turtle lid.
Time for a smile

Align and press together 3rd turtle lid (B) onto the assembled turtle lid.
Time for a smile

Align and press together the last turtle lid (part   B) onto the assembled turtle lid.
Time for a smile

Secure using (4) 3/4″ (1.9cm) screws.
Time for a smile

Press together the interlocking seam.
Time for a smile

Secure using (4) 3/4″ (1.9cm) screws.
Time for a smile

Align to the center and press the lid cap (part C) onto the assembled.
Time for a smile

Secure using (4) 3/4″ (1.9cm) screws.
Time for a smile

Last step…

Choose 1 of the 4 locations shown and assemble the tether (part H) to the lid.
Last step

Secure using (1) 3/4″ (1.9cm) screw.
Last step

To secure, loop around knob at the side of the head.
Last step

little tikes Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals