hp 3390 LaserJet MFP Black Printer User Guide

hp 3390 LaserJet MFP Black Printer

Product Information

The HP LaserJet 3390/3392 is an all-in-one printer that combines printing, scanning, copying, and faxing capabilities. It is designed to provide high- quality prints and efficient performance for small office or home office use.

Specifications

• Printing Technology: Laser
• Print Resolution: Up to 1200 x 1200 dpi
• Print Speed: Up to 22 ppm
• Scan Resolution: Up to 1200 dpi
• Copying Speed: Up to 22 cpm
• Fax Speed: 33.6 Kbps
• Paper Capacity: 250 sheets
• Connectivity: USB, Ethernet

Product Usage Instructions

Setting up the all-in-one

Step 1: Prepare the location
Place the all-in-one on a sturdy, level surface in a well-ventilated area. Make sure that the air vents are not blocked and all doors can open freely.

Step 2: Regulate the environment
Ensure that the surrounding environment meets the recommended specifications. Maintain a distance of at least 635mm (25.0 inches) from other objects on all sides of the all-in-one.

Step 3: Verify the package contents
Check the package contents to ensure that you have received all the necessary items. The package should include:

• Automatic document feeder (ADF) input tray
• HP LaserJet 3390/3392 all-in-one
• Power cord
• Fax cord
• Print cartridge
• Start Guide and support flyer
• CD-ROMs containing software and online User Guide
• 250-sheet media input tray (HP LaserJet 3392 all-in-one only)
• Control-panel faceplate (if not already installed)

Step 4: Remove all packing tape

Thoroughly inspect the all-in-one and remove any packing tape that may be attached to it.

Step 5: Locate the all-in-one parts

Familiarize yourself with the different parts of the all-in-one.

These include:

• Tray 2
• Single-sheet priority input slot
• Print-cartridge door
• Output bin
• Control panel
• Automatic document feeder (ADF) input tray
• Convenience stapler (HP LaserJet 3392 all-in-one only)
• Power switch
• Tray 3 (optional for HP LaserJet 3390 all-in-one)
• Power connector
• Straight-through output door
• DIMM door
• Interface ports

Step 6: Install the control-panel faceplate (if not already installed)
If the control-panel faceplate is not already installed, follow the instructions provided in the manual to install it properly.

FAQ

Q: Are USB and network cables included with the all-in-one?
A: No, USB and network cables are not included in the package. You will need to purchase them separately.

Q: How can I obtain more regulatory information?
A: For more regulatory information, refer to the electronic User Guide provided with the all-in-one.

Copyright Information
© 2006 Copyright Hewlett-Packard
Development Company, L.P.
Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws.
The information contained in this document is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Edition 1, 4/2006
Q6500–90902

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. Increase separation between equipment and receiver.
• Connect equipment to an outlet on a circuit different from that to which the receiver is located.
• Consult your dealer or an experienced radio/TV technician.

Any changes or modifications to the printer that are not expressly approved by HP could void the user’s authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
This equipment complies with FCC rules, Part 68. On the back of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.
The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all, areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.
This equipment uses the following USOC jacks: RJ11C.
An FCC-compliant telephone cord and modular plug is provided with this equipment.

This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. This equipment cannot be used on telephone company-provided coin service. Connection to Party Line Service is subject to state tariffs. If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. If advance notice is not practical, the telephone company will notify the customer as soon as possible.

Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service. If trouble is experienced with this equipment, please see the numbers in the front of this manual for repair and (or) warranty information. If the trouble is causing harm to the telephone network, the telephone company may request you remove the equipment from the network until the problem is resolved. The following repairs can be done by the customer: Replace any original equipment that came with the device. This includes the print cartridge, the supports for trays and bins, the power cord, and the telephone cord.
It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. This is to avoid damage to the equipment caused by local lightning strikes and other electrical surges.

See the electronic User Guide for more regulatory information.

Trademark Credits
Microsoft®, Windows®, is a U.S. registered trademark of Microsoft Corporation. All other devices mentioned herein may be trademarks of their respective companies.

Setting up the all-in-one

Step 1: Prepare the location
Place the all-in-one on a sturdy, level surface in a well-ventilated area. Make sure that the air vents are not blocked and all doors can open freely.

Step 2: Regulate the environment
Do not place the all-in-one in direct sunlight or in an area that has abrupt temperature and humidity changes. The recommended ranges are 15 to 32.5°C (59 to 90.5°F) and 10 to 80% relative humidity.

Step 3: Verify the package contents

NOTE The USB and network cables are not included.

Step 4: Remove all packing tape
Check the all-in-one thoroughly and remove all the packing tape.

Step 5: Locate the all-in-one parts

1. tray 2
2. single-sheet priority input slot
3. print-cartridge door
4. output bin
5. control panel
6. automatic document feeder (ADF) input tray
7. convenience stapler (HP LaserJet 3392 all-in-one only)
8. power switch
9. tray 3 (optional for HP LaserJet 3390 all-in-one)
10. power connector
11. straight-through output door
12. DIMM door
13. interface ports

Step 6: Install the control-panel faceplate (if not already installed)

1. Align control-panel faceplate with the all-in-one. 2) Beginning in the center of the faceplate and working outward, press the faceplate until it snaps into place.

NOTE Make sure that the faceplate is aligned correctly and is not pressing any buttons.

The control panel includes the following areas:

1. fax controls
2. alphanumeric buttons
3. display and menu controls
4. copy controls
5. scan controls

Step 7: Install the automatic document feeder (ADF) input tray

1. Open the ADF cover.
2. Align the two tabs on the input tray with the two grooves in the ADF lid.
3. Slide the tray into the grooves until the tray snaps into place.
4. Close the ADF cover.

Step 8: Load tray 2

1. Pull out tray 2.
2. Adjust the media guides to the size of the media.
3. Place media in the tray.

NOTE Do not fan the media before placing it in the tray.

Step 9: Install tray 3 (HP LaserJet 3392 all-in-one only)

1. Place tray 3 on a sturdy, level surface.
2. Use the alignment pins at the corners of the tray as a guide, and place the all-in-one on top of tray 3. Make sure the connector that is at the rear of the right side connects with the all-in-one.

Step 10: Install the print cartridge

1. Open the print-cartridge door.
2. Remove the print cartridge from its packaging, and then rock the cartridge gently five or six times.
3. Bend the plastic tab at the end of the cartridge.
4. Pull the tab until all the sealing tape is removed from the cartridge.
5. Hold the print cartridge by the handle and insert it into the all-in-one.
6. Close the print-cartridge door.
   CAUTION If toner gets on your clothing, wipe the toner off with a clean cloth, wash the items in cold water, and air dry. Hot water or heat from a dryer sets the toner in the fabric.
   NOTE Hewlett-Packard Company cannot recommend using non-HP print cartridges, whether they are new, refilled, or remanufactured. Because they are not HP products, HP cannot influence their design or control their quality.

Step 11: Connect the power cord

1. Connect the power cord to the power connector on the back of the all-in-one.
2. Connect the other end of the power cord to a grounded alternating current (AC) outlet.
   NOTE Use only the power cord that came with the all-in-one.

Step 12: Connect a printer cable to the all-in-one

NOTE If you are using the all-in-one as a standalone fax machine, go to step 13. If you are using it as a standalone copier, go to step 14.
Connect the USB cable (A/B) or the network cable to the correct port.

CAUTION Do not connect the cable to a computer or a network at this time.

Step 13: Connect to a telephone line

1. Connect the included fax cord to the port on the all-in-one that is marked with an “L”.
2. Connect the cord to a telephone jack.

NOTE Use only the fax cord that came with the all-in-one. For more information about faxing, see the online User Guide.

Step 14: Turn on the all-in-one
Press the power button on the right side of the all-in-one.

Hint If the all-in-one has no power and no lights are lit on the control panel, make sure that the power cord is attached securely to both the all-in- one and a power outlet. Also, if the power cord is connected to a power strip, make sure that the power strip is switched on, or connect the allinone directly to a wall outlet to test the power strip.

Step 15: Set the control-panel-display language and location (if necessary)
If prompted by the control panel, select your language and location. Follow the instructions on the control panel.

NOTE The all-in-one automatically restarts after you select the location.

Step 16: Test the hardware setup by printing a configuration report

1. Press Menu.
2. Use the < or the > button to select Reports, and then press .
3. Use the < or the > button to select Config report, and then press .

Hint If the page that prints is totally blank, remove the print cartridge, make sure that the sealing tape is removed (see step 10), reinstall the print cartridge, and then try printing the page again.

Step 17: Test the copier by using the automatic document feeder (ADF)

1. Load the configuration report that you just printed print-side up into the ADF input tray.
2. Adjust the media guides to sit against the page.
3. Press Start Copy.
   Hint If the copy job produces a blank page, make sure that the original is loaded print-side up and that no jams exist in the ADF and paper path. For information about removing jams and other troubleshooting tips, see the online User Guide.

Step 18: Test the copier by using the flatbed scanner

1. Open the scanner lid, place the configuration report print-side down on the flatbed scanner, and then close the scanner lid.
2. Press Start Copy.

Hint If the copy job produces a blank page, make sure that the original is loaded print-side down on the flatbed scanner and that no jams exist in the paper path. For information about removing jams and other troubleshooting tips, see the online User Guide.

Step 19: Test the convenience stapler

1. Insert two sheets of paper into the convenience stapler.
2. If the stapler does not work, open the stapler door, remove the staple cassette, reinsert it, and try again.

NOTE Make sure the stapler door is closed.

Step 20: Complete the hardware setup
If you are using the all-in-one as a standalone copier, the setup is complete. If you are using the all-inone as a standalone fax, go to step 23 to complete the setup. To install the software, go to step 21 for Windows or step 22 for Macintosh.

Step 21: Connect to a Windows computer (Windows only)
The all-in-one software supports a full-featured installation for Windows 2000 and XP. Only print and scan functions are supported for Windows 98, Me, and Server 2003.

NOTE To connect to a Macintosh computer, go to step 22.

1. Close all programs that are running on the computer.

2. Insert the software CD-ROM into the CD drive. If the installation program does not begin automatically, click Start, click Run, click Browse, select the HPSetup.exe file on the CD, and then click OK.
   NOTE You must have administrative privileges to install the software for Windows XP or Windows 2000.

3. Select Install HP LaserJet software.

4. In the Printer Connection Wizard, select a connection type.

5. For USB connections, the software prompts you to connect the all-in-one to a computer.
   -or-
   For network connections, connect the network cable to the network before proceeding.

6. Follow the onscreen instructions to install the software. When prompted, select the Typical installation type.

Step 22: Connect to a Macintosh computer (Mac OS X V10.3 and V10.4 only)

1. Connect the USB cable (A/B) to the Macintosh, or connect the network cable to the all-in-one.
2. Close all of the programs that are running on the computer.
3. Insert the software CD-ROM into the CD drive.
4. In the CD folder, double-click the HP All-in-One Installer icon.
5. Follow the onscreen instructions, and then click Install.
6. When prompted, restart the computer.
7. When the HP All-in-One Setup Assistant starts, follow the instructions.

Step 23: Fax setup
If you installed the all-in-one software, the HP LaserJet Fax Setup Utility (Windows) or Setup Assistant (Mac) automatically runs. The software prompts you to set the time, date and fax header. In many countries/regions, this is a legal requirement.
Hint If the utility does not run automatically, access it in the program group.

If you are using the all-in-one as a standalone fax, complete the following steps:

1. Press Menu.
2. Use the < or the > button to select System Setup, and then press .
3. Use the < or the > button to select Time/Date. Press .
4. Use the < or the > button to select the 12-hour clock or 24-hour clock, and then press .
5. Use the alphanumeric buttons to enter the current time.
6. Complete one of the following:
   • For the 12-hour clock, use the < or the > button to move past the fourth character. Select 1 for a.m. or 2 for p.m. Press .
   • For the 24-hour clock, press .
7. Use the alphanumeric buttons to enter the current date. Use two digits to specify the month, day, and year. Press .
8. Use the < or the > button to select Fax setup, then press .
9. Use the < or the > button to select Fax Header, then press .
10. Use the alphanumeric buttons to enter your fax number and your company name or header, and then press .
    NOTE The maximum number of characters for the fax number is 20; use up to 40 characters for the company name.

NOTE For complete information about using the fax features, including how to set up fax features to work with telephone services such as voice mail, see the online User Guide.

Step 24: Test the software installation
Print a page from any program to make sure that the software is correctly installed. If the installation failed, reinstall the software. If the reinstallation fails, go to step 28.

Step 25: Register the all-in-one
Register at http://www.register.hp.com to receive free all-in-one updates and information that is relevant to you, including driver or software update notifications, all-in-one support alerts, and tips for using your HP all-in- one.

Step 26: Program the Scan To button (Windows only)

1. Click Start, click All Programs or Programs, and then click HP. Click HP LaserJet 3050/3052/3055/3090 all-in-one, and then click Scan.
2. Click Setup.
3. Select Change the destinations that show up on the all-in-one control panel when I press the Scan To button, and click Next.
4. Select Allow me to scan by pressing the Scan To button on the all-in-one….
5. Move the destinations from the PC window to the All-in-one window.
6. Click Update. See the online User Guide for complete information.

Step 27: Use the HP ToolboxFX software to set device settings (Windows only)

1. Click Start, click All Programs or Programs, and then click HP. Click HP LaserJet 3050/3052/3055/3090 all-in-one, and then click HP LaserJet ToolboxFX.
2. Use the software to set the device settings. See the online User Guide for complete information.
   NOTE The HP ToolboxFX software does not support Macintosh operating systems.

Step 28: Support information
For customer support, see http://www.hp.com/support/lj3390 or http://www.hp.com/support/lj3392, or see the support flyer for more information.

Congratulations!
The all-in-one is ready to use. See the online User Guide, or use the HP ToolboxFX software (Windows 2000 or XP only) to solve problems.
The following sections provide tips for using the all-in-one.

Using the single-sheet priority input slot

1. Feed only one sheet of media at a time into the single-sheet priority input slot.
2. The all-in-one pulls in the media partially.
3. You must wait for the all-in-one to stop before feeding another sheet of media. See the online User Guide for complete information.

Clearing print jams

1. Unplug the all-in-one.
2. Remove the print cartridge.
3. Open the rear output door and rotate the green pressure-release levers downward.
4. Remove all visible media. See the online User Guide for complete information.

Clearing ADF jams

1. Open the ADF door.
2. Lift up the pickup roller.
3. Carefully remove the jammed media without damaging the all-in-one.
4. Return the pickup roller to its original position and close the ADF door. See the online User Guide for complete information.

Preventing spots and streaks on scans and copies

1. Unplug the all-in-one.
2. Open the scanner lid.
3. Clean the scanner glass and the scanner strip with a soft sponge or cloth that has been moistened with a nonabrasive cleaner.
4. Dry the glass with a chamois or cellulose sponge. See the online User Guide for complete information.

© 2005 Hewlett-Packard Development Company, L.P.
www.hp.com

References

• Laptop Computers, Desktops, Printers, Ink & Toner | HP® Official Site
• hp.com/support/lj3390
• hp.com/support/lj3392
• HP® | Official Site
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>