IC-TKIC7B-01 Indoor Cycling IC7 Tomahawk Instruction Manual

IC-TKIC7B-01 Indoor Cycling IC7 Tomahawk

Product Information

The IC7 Indoor Cycle is a high-quality indoor cycling bike designed for intense workouts. It is available in two models: IC7 Tomahawk powered by ICG and IC7 Matrix powered by ICG. The bike features a two-stage drivetrain and comes with various article numbers and serial numbers depending on the model.

Specifications

• Release Date: 11.11.2014
• Version: [version number]
• Applicable Products:
  • IC7 Tomahawk powered by ICG – THK: IC-TKIC7B-01
  • IC7 Matrix powered by ICG – MX: IC-MXIC7B-01

Product Usage Instructions

Identify the Product
Before performing any repair job, make sure to identify the product using the article number and serial number found on the tag plate label positioned on the lateral frame tube.

Required Tools
Ensure you have the following tools:

• Phillips screwdriver – Quantity: 1
• PC USB cable (Type-A male to Type-A male) – Quantity: 1

Preparation
Ensure the bike is in a stable position and properly secured before starting any repair work. Keep it aside to prevent accidental use.

Installation of ICG IC7 Updater
To update the IC7 software, follow these steps:

1. Download the application setup file from our service portal http://www.icg-internal.com.
2. The application is compatible with Microsoft Windows 7, Microsoft Windows 8, and MAC OS X Version 10.7 Lion. If you encounter any problems during installation, we recommend updating your operating system to the latest version.
3. For Windows operating systems, follow the installation steps. For MAC OS devices, simply unpack the application.

Remove Service Cap
To access the USB interface, remove the service cap located on the left side of the shroud.

Start ICG IC7 Software Updater
To start the software update process:

1. Press “Next” to begin the update.
2. The application will automatically search and download the latest software updates from the ICG server.
3. If there is no internet connection available, the application will skip the download and only offer previous updates.

Select Software Version and Connect IC7
Follow these steps to select the software version and connect the IC7 to your computer:

1. Select the desired software version from the dropdown menu and press “Next” to proceed.
2. Ensure that the console on the IC7 is powered on by turning the crank at least 2 rounds.
3. Connect the IC7 to your computer using a USB cable (Type-A male to Type-A male).
4. Once connected, the console will turn off automatically, and the “Next” button will be activated. Press “Next” to start the update.

Disconnect IC7 and Computer
After a successful update, disconnect the IC7 and your computer within 10 seconds.

Attention: Ensure that the IC7 and computer are disconnected within the specified time frame.

FAQ

• Q: Where can I find the article number and serial number of the product?
  A: The article number and serial number can be found on the tag plate label positioned on the lateral frame tube of the bike.

• Q: What tools do I need for the repair work?
  A: You will need a Phillips screwdriver and a PC USB cable(Type-A male to Type-A male).

• Q: How do I download the ICG IC7 Updater application?
  A: You can download the application setup file from our service portal at http://www.icg-internal.com.

• Q: Which operating systems are compatible with the ICG IC7 Updater application?
  A: The application is compatible with Microsoft Windows 7, Microsoft Windows 8, and MAC OS X Version 10.7 Lion.

• Q: How do I select the software version for the IC7?
  A: During the update process, you need to select the desired software version from the dropdown menu in the application.

• Q: What should I do if there is no internet connection available during the software update?
  A: If there is no internet connection, the application will skip the download and only offer previous updates.

TASK DESCRIPTION

Software Update IC7 using ICG Update application

Applicable for Product:| -IC7 Tomahawk powered by ICG

-IC7 Matrix powered by ICG

|
Applicable for Product Version:| -IC7 two-stage drivetrain|
Applicable for Product Art. No.: For both SKU´s THK IC7 powered by ICG and Matrix IC7 powered by ICG| – THK: IC-TKIC7B-01

– MX: IC-MXIC7B-01

|
Applicable for Product Serial No.:| – THK IC7: TARB0000001-14B > ……

– MX IC7: LARB0000001-14B > ……

|

The product article number and product serial number informatin can be found on the tag plate label positioned on the lateral frame tube as shown below. Please make sure to identify the product prior to performing any repair job .

AFFECTED PARTS: IC7 Indoor Cycle

REQUIRED TOOLS:

INSTALLATION

Warning! Please ensure that the bike is in a stable position and properly secured while repair work is being performed. Put it aside to prevent it from being used.

1. Installation of ICG IC7 Updater

   • a) Please download the application setup file from our service portal http://www.icg-internal.com
   • b) The application is available for Microsoft Windows 7, Microsoft Windows 8 and MAC OS X Version 10.7 Lion.
     *** We recommend performing the latest OS Software version update in case you
     experience some problems during application installation. Please follow the installation steps for Windows operating systems or just unpack the application for MAC OS devices.

2. Remove service cap

   • a) Remove the service cap located on the left side of the shroud to access the USB interface.

3. Start ICG IC7 Software Updater

   • a) Press “Next” to start the update.

   • b) The application will automatically search and download the latest software updates from the ICG server and proceed to the next step. In case there is no internet connection available the application will proceed to the next step without downloading and only the former updates will be available.

   • c) You need to select the software version from the dropdown you want to upload to theIC7 and press “Next” to proceed.
     Important: Make sure that the console on the IC7 is powered on.
     To power it on, turn the crank at least 2 rounds.

   • d) Please connect now the IC7 with your computer using an USB cable Type-A male to USB Type-A male.

   • e) Once the IC7 is connected the console will turn off automatically and the “Next” button gets activated. Press “Next” to start the update.

   • f) Once the update was successful you must disconnect the IC7 and your computer within 10 seconds.
     Attention! If you don´t disconnect the IC7 and the computer within the 10 sec., the console will turn off again and you need to repeat the operation starting from step 3 e).

   •   g) In case of an unsuccessful Update please repeat the operation starting from step 3e).

   • h) Once the update was applied and the console started up to the normal mode of operation please double check the firmware on the settings.

4. Reassemble the service cap

   • a) Reassemble the service cap located on the left side of the shroud.

5. End of the operation
   Simulate a brief session, checking if the bike is in good working order.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>