InFocus WL0308 Intelligent Danoramic Camera User Guide

: June 16, 2024
: InFocus

Table of Contents

Parts Description
Connection Information
Firmware update
Packing List
Statement
Camera Security
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**InFocus WL0308 Intelligent Danoramic Camera User Guide

**

Parts Description

Connection Information

Get camera connected with 12V 3.5V adapter.
Press lens module to start the camera, blue instruction light will blink slowly when camera is ready for work.
Connect PC with camera via USB.
Start video conference platform(QQ, Skype, ZOOM, etc), enter distant conference, instruction light would be steady blue.
Click camera buttons to turn down/up voice, mute microphone, and switch modes.
When conference is dismissed, press lens module to turn off camera.

Note: You may need to select MEETING 360 camera and microphone when using some video conferencing platforms.

Firmware update

Turn on the camera and get it connected with PC, long hold mode button for 3 seconds.
Camera would be restarted and enter USB mode.
Copy firmware to camera USB.
Restart the camera to enter system update, when the update is done, blue light would turn to steady blue.

Link for downloading Firmware:
www.kandaovr.com/download
www.infocus.com/360camera

Packing List

Camera
12V 3.5A Adapter
USB
User Guide
Warranty Card

Statement

Please read these instructions.
Please pay attention to all warnings.
Please follow all instructions.
Never operate the device near heat sources such as radiators, heaters, stoves, or other heat generating equipment
Only use accessories and parts specified and provided by the manufacturer for Kandao.
All maintenance should be conducted by the qualified personnel. Repairs are required in case of any types of damage to the device, for exam ple, power cord or plug damage, liquid or object falling into the device, or getting wet in the rain or dampness, or failure to work or falling.

Camera Security

Warning: If you fail to take the following precautions, you may be seriously injured or killed by the electric shock or fire disaster, or your Intelligent 360 degree panoramic camera may be damaged: Please check before using the camera and accessories to make sure they are intact. For security, only Kandao accessories that are provided with the device or genuine ones purchased can be used. Using any other parts, accessories, or chargers not recommended by Kandao may result in fire, electric shock, or causalities. Damage caused by the use of unauthorized accessories or parts is not covered by the warranty.

Do not place or fix the product on an unstable surface.Failure to follow this precaution may cause the product to loosen or fall off, causing an accident or damage to the camera.
When using external power supply connection, please observe all safety rules of third-party power supply equipment.
The le ns of Intelligent 360 degree panoramic camera is made of glass.If the lens is damaged, be sure to handle it carefully to avoid being scratched by the broken glass and keep out of the reach of children.
The temperature of the camera may rise during operation, which is a normal phenomenon during use.In this case, turn off the camera and leave it to cool before trying to use it.
This product is not a toy and you are solely responsible for complying with all local laws, regulations and restrictions.
Please do not use the Intelligent 360 degree panoramic camera for unauthorized monitoring, candid shooting or in any way that violates personal privacy regulations.Normally, the use of cameras for such purposes is strictly prohibited and can result in significant liability and criminal proceedings against the operator.
Precautions: do not put the camera in extremely cold or hot environment. Extremely cold or hot conditions may cause the camera to temporarily not work properly.
Warning: there is no protection for the two lenses of the Intelligent 360 degree panoramic camera. If you do not pay attention, it is easy to form scratches.Avoid placing the lens on any surface. Lens scratches are not covered by the warranty.

This symbol indicates that your product should be handled separately from household waste according to local laws and regulations. When the product life ends, please take it to the collection site designated by the local authority. The separate collection and recycling of discarded products are helpful to the protection of natural resources. Besides, please make sure that they are recycled in ways that are beneficial to the human health.

FCC ID:2ATPV-KDWL
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Product Name: Intelligent360 degree panoramic camera
Model: WL0308
Manufacturer: Kandao Technology Co.,Ltd.
Address: Unit 5D, Block M7, SinoSteel Building,
Nanshan, Shenzhen, China