INNLED TA54N-B HARIZ Lamp User Manual
- June 16, 2024
- INNLED
Table of Contents
TA54N-B HARIZ Lamp
User Manual
TA54N-B HARIZ Lamp
Thankyou for purchasing an INNLED product.
« Commited to supporting the french industry, this product was developed and
assembled within our Montpellier workshop. We attach particular importance to
our clients’ feedback so feel free to contact us in case of any comment or
suggestion.
So we can continue ’’ lighting up your ideas ’’ in the most efficient way… »
The Innled team
Terms of use and Warranty terms, read page 10.
INNLED products are designed to light up your greatest moments, however
organised or totally improvised they are ! Whether you are indoors or
outdoors, whether you have access to power or not, we will continue lighting
up your ideas at all times.
DIMENSIONS AND PMMA EXAMPLES
INSTALLATION
Setting up your Hariz Lamp requires only one action, placing the PMMA into the
slot.
Make sure you are sliding the PMMA in the right direction !
There are four holes in the slot where the LEDs are placed, which should be
aligned with the four metallic balls you can see at the base of the PMMA.
Slide in the PMMA, it locks once the balls are secured in the corresponding
holes.
INNLED delivers all the PMMA profiles in protective covers, designed to
protect them from dust and scratches, polycarbonate is a sensitive material.
We recommend that you manipulate these profiles with care, the cover can be
used as a glove.
Make sure that the metallic balls are facing the «Velcro ®», this will make
the manipulating easier.
The profiles are delivered with a textile cover.
Remove the cover only once Hariz is set up and ready to be used.
DMX : USE AND SETTINGS
To use Hariz’ full potential, to explore colours and effects, Hariz needs to
be connected to a DMX transmitter.
INNLED has a range of transmitters, with different characteristics. Please
find them below.
-
WIRELESS DMX TRANSMITTER + WIFI – TA51W2 • 2,4 GHz
• wifi
• XLR5 in/out
• 512 channels
• Diversity 21 frequencies
• Power supply on USB connector (transformer and cable provided).
• Distance : 100m maximum between transmitter and receivers
• Delivered with antenna, USB cable and external power supply -
WIRELESS DMX TRANSMITTER – TA51 • 2,4GHz
• no wifi
• XLR3 in/out
• 512 channels
• Diversity 21 frequencies
• Power supply on USB connector (transformer and cable provided).
• Distance : 100m maximum between transmitter and receivers
• Delivered with antenna, USB cable and external power supply
The TA51/TA51W2 transmitters set the parameters of the Hariz lamps’ DMX
adresses.
You can’t assign the DMX address on the Hariz base, it can only be done with
the transmitters.
Hariz have 6 DMX channels.
The transmitters have 512 DMX channels which allow you to drive 85 Hariz with
the same transmitter.
The transmitter has 31 DMX universes, and 21 frequencies.
For instructions concerning the TA51 an T151W2, please read the TA51/TA51W2
user manuals.
DMX APRESSING
Number| Channel| Value
1| Dimmer| Linear
0 to full
2| Strobe| 0 to 20% = Open
21% to 40% = Speed 1
41% to 60% = Speed 2
61% to 80% = Speed 3
81% to 100% = Speed 4
3| Red| Linear
0 to full
4| Green| Linear
0 to full
5| Blue| Linear
0 to full
c)| White| Linear
0 to full
& 8| NC, for LAPPS compatibilty
The TA51 requires a DMX lighting desk to drive the lamps, the TA51W2 can also
be directly driven with INNLED’s application : LAPPS. Connected to the TA51W2,
LAPPS allows you to drive one or several lamps form a distance. Navigate
through a panel of colours, set your intensity and chose your effects.
APPLICATION : LAPPS Control from a distance, one or several lamps of the
INNLED range.
- Simple and intuitive use handling
- 2 Modes : Basic or Expert
- Range of colours to chose from
- Light intensity setting
- 6 effects to chose from within the Expert Mode
- Requires a wifi / wireless DMX interface
LAPPS WILL ONLY WORK WITH THE TA51W2 TRANSMITTER.
OPTIONS AND ACCESSORIES
Profiles and customization
-
STANDARD SHAPES You have a choice of 4 “standard” profiles :
• “XL lamp” profile (L 320mm x H 400mm x thick 8mm)
• “Classical lamp” profile (L 300mm x H 270mm x thick 8mm)
• “Picto” profile (L 230mm x H 230mm x thick 8mm)
• “Totem” profile (L 120mm x H 380mm x thick 8mm) -
CUSTOM PROFILES Custom profile can be made on demand.
• This option requires a vectorized logo or text (.pdf or .ai). -
FROSTED CUSTOM STICKER This frosted adhesive is cut and positioned on one side of the profile.
It allows you to highlight a personalized brand or logo… or just share a message.
• This option requires a vectorized logo or text (.pdf or .ai). -
PROTECTIVE COVER This anti-static cover allows you to protect the profiles against dust and scratches
Power -
12V DC POWER SUPPLY • 1 Output on 60cm cable with Power Jack 2mm connector
• Power supply : 90-240V AC
• Charge voltage : 12,6V
• Light indicator : “on charge” (red), charging” (orange) and “charged” (green)
• Charging time : 7-8H
• Dimensions :L 80 mm x l 30mm x H 60mm
• Weight : 0,2kg
Packaging -
CARRYING CASE FOR 10 • Shockproof case IP67 with telescopic handle and wheels
• 1 fast charger 10 outputs ( option )
• Machined foam for 10 Hariz : 10 compartments for lamp bases, 2 large compartments for PMMA profiles, 1 compartment for storage, 1 large compartment for 2 multiplug and 10 chargers
• Dimensions : 687 x 528 x 366mm
• Weight : 9kg -
FLIGHTCASE 10 HARIZ • Shockproof case IP67
• Machined foam 2 Hariz : 2 compartments for lamp bases, 2 Plug charger, 1 Wireless DMX transmitter, 1 Mini console 6 circuits
• Dimensions : 594 x 473 x 215mm
• Weight : 6kg
TECHNICAL SPECIFICITIES
PROFILE
- Transparent plastic plate, glass beaded in the mass
BASE
- Powder coated steel 15/10
- Finish : black RAL 9005 or white RAL 9010
LED POWER
- 9W in total.
- 4,5W in warm white
- 4,5W in RGB
LIGHTING SOURCE
- 480 lm in white, 260 in RGB COLOUR TEMPERATURE
- Warm white calibrated at 3200K
- White + RGB from 2300K to 10000k
DMX HF
- Integrated receiver
- Addressing through the transmitter
- Frequency 2,4GHz
- 6 channels per lamp : Dimmer, strobe,red, green, blue, warm white
- 12h warm white at 100%
- 2 batteries LI-ION 2800MA/H
CHARGING TIME
- 3h with the pro charger 10 lamps
- 8h with the charger 1 lamp
VOLTAGE
- 12,6V DC
CLASS
- III NORM
- CE, EN60598-1
IP CLASS
- IP 20
- IK06
BASE DIMENSIONS
- L 226 x l 70 x H 27mm PROFILE DIMENSIONS
- Max 300 x 300 x Thick. 8mm
WEIGHT
- +/- 1,7kg
TEMPERATURE RANGE
- 0° to +40°C
WARRANTY
- 2 years
Warranty Terms
Please refer to INNLED’s general warranty terms
Furthermore, INNLED products are designed for professional use only, they are
not to be used in a domestic environment.
Committed to an approach based on quality, INNLED reserves the right to adapt
or modify the technical characteristics of its products at any given moment
and without any given notice, the adaptations or modifications then apply to
all the orders placed after the date upon which those adaptations or
modifications were made.
INNLED – 360, Avenue des Compagnons, 34170 Castelnau-le-Lez – FRANCE
Tel : +33 (0) 9 500 508 78 // Fax : +33 (0) 9 550 508 78 // mail :
contact@innled.fr
https://manual-hub.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>