Yihong YH6183 Wireless Controller User Manual
- June 16, 2024
- YIHONG
Table of Contents
Yihong YH6183 Wireless Controller User Manual
Software Overview
Overview
Lotus Lantern is a mobile APP to control LED strip by both IOS and Android phones.
The traditional control ways like infrared, 433MHz, 2.4GHz and others old wired ways will be replaced by mobile phone control way with convenient, powerful and scalable features.
Through this mobile APP, you can not only control the color, brightness and color temperature of the LED strips but also set up all kinds of fancy flash mode; Also this APP can change the light of the LED strip according to the rhythm of the music. This APP can set and control several LED strips through Bluetooth and the operation is very simple, easy to learn and easy to use.
Features
- Adjust color LED strips with 60,000 colors to change color and brightness and adjust monochrome LED strips to change brightness and color temperature.
- Play music or turn on a sound playback device, you can let the light change the color and brightness with the rhythm of music, the music rhythm beautiful.
- Inside multiple setting mode for color change and control LED strips without mobile.
- Long distance control with omni-directional antenna, and many-to-many group control mode.
- Once the connection is successful, connect automatically next time
Performance
Lotus Lantern APP is easy for use as well as great compatible with all
kinds of smart phones; After the actual test of hundreds of mobile phones
verification, the compatibility is above 95% of mobile phones in the market.
APP is small and convenient, it consumes less system resources, so the
requirements of the mobile configuration are low. Control delay is small, the
operation feels good, light control is smooth with people’s visual sense.
Operating Environment
This APP program requires phones of system above Android 4.3 and iOS 8.0. Mobile phone configuration is not limited.
Instructions
Note: Android version and iOS version download and use the same method, here
in the Android version as an example
APP Download Scan the QR code iOS and Android systems can download the
“Lotus Lantern” APP by scanning the QR code. Open the browser or other tools
with “Scan QR code” function, scan the “Lotus Lantern” QR code as below:
App Operation
switch to the music rhythm interface :
Switch to the online music interface:
Switch to the microphone rhythm interface:
After entering the APP interface, if Bluetooth is not enabled, “an application
wants to enable the Bluetooth function of this device.” Click [Allow]
switch to color and brightness interface:
Switch to the schedule interface:
Switch to the modify pin sequence interface
click to show the lamp list, view lamp list :
Click to RGB manual adjustment view:
switch to the mode interface:
LED2021-24KEY
Rhythm 1-2: Single click to switch to 1-2 rhythm mode
Rhythm 3-4: Click to cycle through the 3-4 rhythm mode
Remote control lock: After pressing, the remote control is locked,
pressing the switch is available, other keys are invalid. After pressing once,
the unlock button can be used. After the remote control is locked, press the
switch to unlock the remote control. FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
ISED Statement English:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’ s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). French: Cet appareil contient des émetteurs/r é cepteurs exempts de licence qui sont conformes aux RSS exempt és de licence d’Innovation, Sciences et Développement économique Canada. L’exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d’interf é rences. (2) Cet appareil doit accepter toute interf é rence, y compris les interf é rences susceptibles de provoquer un fonctionnement indé sirable de l’appareil. l’appareil num é rique du ciem conforme canadien peut-3 (b)/nmb – 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l’exemption des limites d’ é valuation courante dans la section 2.5 du cnr – 102 et conformité avec rss 102 de l’exposition aux rf, les utilisateurs peuvent obtenir des donn é es canadiennes sur l’exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d’exposition aux rayonnements du Canada é tablies pour un environnement non contrôlé.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.