KYOCERA ECOSYS Monochrome Multifunctional Laser Printer User Guide
- June 16, 2024
- Kyocera
Table of Contents
KYOCERA ECOSYS Monochrome Multifunctional Laser Printer
Product Information
Specifications
- Model: ECOSYS M2135dn/ECOSYS M2635dn/ECOSYS M2635dw ECOSYS M2040dn/ECOSYS M2540dn/ECOSYS M2540dw ECOSYS M2735dw/ECOSYS M2640idw
- Power Source: 120 V 60 Hz 8.7 A (for some models) or 220 – 240 V 50/60 Hz 4.4 A (for some models)
- Relative Humidity: 10 to 80%
FAQ
- Q: What are the power source options for this product?
- A: The power source can be either 120 V 60 Hz 8.7 A or 220 – 240 V 50/60 Hz 4.4 A, depending on the model.
- Q: What is the recommended relative humidity for operating this product?
- A: The recommended relative humidity is between 10 to 80%.
- Q: How should I ensure the safety of using this product?
- A: Please be cautious of the hot surface and avoid touching parts in the high-temperature area to prevent burns.
Product Usage Instructions
Safety Guide
CAUTION: Hot surface! High temperature inside. Do not touch parts in this area, because there is a danger of getting burned.
Environment CAUTION
- To keep the machine cool and facilitate changing of parts and maintenance, allow access space as shown below.
- Leave adequate space, especially around the side cover, to allow air to be properly ventilated from the machine.
Model Power Source Operating Environment
For the specified models, the power source can be 120 V 60 Hz 8.7 A or 220 – 240 V 50/60 Hz 4.4 A. The relative humidity should be maintained between 10 to 80%.
Cautionary Labels
The machine bears any of the following labels.
NOTE: Do not remove these labels.
Installation Instructions
CAUTION: Hot surface
- High temperature inside. Do not touch parts in this area, because there is a danger of getting burned.
Warning
- Do not attempt to incinerate parts that contain toner.
- Dangerous sparks may cause burns.
Environment
CAUTION: To keep the machine cool and facilitate changing of parts and maintenance, allow access space as shown below. Leave adequate space, especially around the side cover, to allow air to be properly ventilated from the machine.
Dimensions
Specifications
Model
| ECOSYS M2135dn/ECOSYS M2635dn ECOSYS M2635dw/ECOSYS M2040dn ECOSYS
M2540dn/ECOSYS M2540dw| ECOSYS M2735dw ECOSYS M2640idw
---|---|---
Power Source| 120 V Specification Model: 230 V Specification Model:| 120 V
60 Hz 8.7 A
220 – 240 V 50/60 Hz 4.4 A
| 120 V 60 Hz 8.7 A
220 – 240 V 50/60 Hz 4.4 A
Operating Environment| Temperature: 10 to 32.5 °C (50 to 90.5 °F) Relative Humidity: 10 to 80 %