Leica TL2 Digital Photography Instructions

: June 16, 2024
: Leica

Table of Contents

TL2 Digital Photography
Product Information
Specifications
- Product Usage Instructions
1. Inserting the Battery
2. Attaching the Lens
3. Inserting a Memory Card
4. Powering On/Off the Camera
5. Capturing Photos
6. Recording Videos
- FAQ
Q: Where can I find more information about Leica TL2
Q: How can I check the scope of included accessories for
Q: What are the available spare parts for the Leica TL2?
Q: Is the Leica TL2 compliant with FCC rules?

TL2 Digital Photography

Product Information

The Leica TL2 is a high-quality digital camera designed for
professional photographers and enthusiasts. It features a sleek and
compact design, making it easy to carry and use in various shooting
conditions. The camera comes with a range of advanced features and
accessories to enhance your photography experience.

Specifications

Memory card slot: Allows you to insert a memory card for
storing your photos and videos.
HDMI socket: Provides a connection for viewing your photos and
videos on a larger screen.
USB socket: Enables you to transfer files and connect the
camera to other devices.
Lens release button: Allows you to easily detach and replace
the lens.
Self-timer LED/AF assist light: Provides assistance for
focusing and capturing self-portraits.
Microphones: Capture high-quality audio while recording
videos.
Main switch: Power on/off the camera.
Shutter button: Press to capture photos or start/stop recording
videos.
Brightness sensor: Automatically adjusts the screen brightness
for optimal visibility.
Monitor: High-resolution display for previewing and reviewing
your photos and videos.
Status LED: Indicates the camera’s operational status.
Charge status LED: Indicates the battery charging status.

Product Usage Instructions

1. Inserting the Battery

Open the battery compartment located at the bottom of the
camera.
Insert the Leica BP-DC13 battery into the compartment, making
sure it is properly aligned.
Close the battery compartment securely.

2. Attaching the Lens

Press the lens release button located on the camera body.
Align the lens with the bayonet on the camera body and rotate
it clockwise until it clicks into place.
Make sure the lens is securely attached before using the
camera.

3. Inserting a Memory Card

Locate the memory card slot on the side of the camera.
Open the memory card slot cover.
Insert a compatible memory card into the slot, making sure it
is properly aligned.
Close the memory card slot cover.

4. Powering On/Off the Camera

To power on the camera, slide the main switch to the “On”
position. To power off the camera, slide the main switch to the
“Off” position.

5. Capturing Photos

Compose your shot using the monitor or viewfinder.
Press the shutter button halfway to focus on your subject.
Once the focus is achieved, press the shutter button fully to
capture the photo.

6. Recording Videos

Switch the camera to video mode by selecting the appropriate
setting on the function dial.
Press the shutter button to start recording.
Press the shutter button again to stop recording.

FAQ

Q: Where can I find more information about Leica TL2

accessories?

A: You can visit the Leica Camera AG website at
www.leica-camera.com for detailed information on the extensive
range of Leica TL2 accessories.

Q: How can I check the scope of included accessories for

completeness?

A: Before using your Leica TL2 for the first time, please check
the scope of included accessories. The included accessories should
be:

Leica BP-DC13 battery
Battery charger BC-DC13 (including interchangeable mains
connector)
USB type C cord
Dummy plug (inserted when delivered)
Carrying strap
Carrying strap plug release key
Body bayonet cap
Accessory shoe cover
Registration card

Q: What are the available spare parts for the Leica TL2?

A: The available spare parts for the Leica TL2 include:

Body bayonet cap – Order no. 16 060

Q: Is the Leica TL2 compliant with FCC rules?

A: Yes, the Leica TL2 complies with Part 15 of the FCC Rules for
Interference from Information Technology Equipment.

EN
LEICA TL2
Instructions

Designation of parts

4
1 5 6

787

9 10 11

19
20 21

108

13 12

14 15

26c 16
17

25
25a 26a 26b 27
28 29 30a 31

DESIGNATION OF PARTS

View from right (Door opened)

CAMERA

19 Memory card slot 20 HDMI socket

Front view

21 USB socket

Designation of parts

1 Dummy plugs 2 Lens release button 3 Contact strip 4 Self-timer LED/AF assist light 5 Speaker 6 Bayonet

Bottom view
22 Battery 23 Locking lever 24 Tripod thread

Top view
7 Microphones 8 Accessory shoe 9 Main switch 10 Shutter button 11 Function button 12 Setting dial 13 Setting dial
Rear view
14 Brightness sensor 15 Monitor 16 Door over sockets 17 Status LED 18 Charge status LED

LENS
25 Lens hood a. Index points
26 Front mount a. External bayonet for lens hood b. Index point for lens hood c. Internal thread for filters
27 Distance setting ring 28 Focal length setting ring 29 Index for focal length 30 Fixed Ring
a. Red alignment button 31 Contact strip

109

EN FOREWORD

ACCESSORIES

Dear Customer, we wish you a great deal of pleasure and success using your new Leica TL2. Please read these instructions in their entirety so that you can make the most of your Leica TL2. Use the Quick Start Guide for a fast introduction to your new Leica.

Please visit the Leica Camera AG website for information on the extensive range of Leica TL2 accessories:
www.leica-camera.com

SPARE PARTS
Body bayonet cap

Order no. 16 060

SCOPE OF DELIVERY
Please check the scope of included accessories for completeness before using your Leica TL2 for the first time. a. Leica BP-DC13 battery b. Battery charger BC-DC13 (including interchangeable mains
connector) c. USB type C cord d. Dummy plug (inserted when delivered) e. Carrying strap f. Carrying strap plug release key g. Body bayonet cap h. Accessory shoe cover i. Registration card
Attention: Always store small parts (e.g. carrying strap plug release key) as follows: out of reach of children in a location where they will not get lost, e.g. in the designated
positions in the camera case

Accessory shoe cover Dummy plug Carrying strap plug release key Silicon carrying strap Lithium ion battery BP-DC 13, silver Lithium ion battery BP-DC 13, black Battery charger Leica BC-DC 13 Mains plug set USB type C cord
For United Arab Emirates only: TRA REGISTERED No: ER54783/17 DEALER No: DA0112968/13

470-701.801-007 470-701.001-020 470-701.001-029 439-612.100-000
18 772 18 773 470-701.022-000 470-701.801-005 470-701.001-035

110

Subject to changes in design and production.

This is a Class B product based on the standard of the Voluntary Control Council This device complies with Part 15 of the FCC Rules. Operation is subject to

for Interference from Information Technology Equipment (VCCI). If this is used

the following two conditions: (1) This device may not cause harmful interfer-

near a radio or television receiver in a domestic environment, it may cause radio ence, and (2) this device must accept any interference received, including

interference. Install and use the equipment according to the instruction manual. interference that may cause undesired operation.

FCC Note:

Type No.: 5370

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

Tested To Comply With FCC Standards

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

FOR HOME OR OFFICE USE

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to

Contains FCC ID: N5A5370 This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.

For Canada only: CAN ICES-3 (B)/NMB-3(B)

FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with RSS-210 of the IC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation of the device. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This

Trade Name: Type No.

LEICA 5370

equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

Responsible party/ Leica Camera Inc.

For Singapore only

Complies with

Support contact: 1 Pearl Count, Unit A, Allendale, New Jersey 07401

Tel.: +1 201 995 0051/ Fax: +1 201 995 1684

IDA Standards

technicalinfo@leicacamerausa.com

DA104328

111

Attention:

the camera was in the first place, e.g. after being inside a vehicle

· Modern electronic components react sensitively to electrostatic or after being subjected to bright sunlight.

Legal information

discharge. As people can easily pick up charges of tens of

Please take these circumstances into account when planning your

thousands of volts by walking on synthetic carpets for example, shots.

a discharge can occur when you touch your camera, particularly

if it is placed on a conductive surface. If only the camera housing is affected, this discharge is harmless to the electronics. However, despite built-in safety circuits, outer contacts such as those in the flash shoe should not be touched if at all possible for safety reasons. · For any cleaning of the contacts, do not use an optical microfiber cloth (synthetic); use a cotton or linen cloth instead! Before touching the contacts, you can make sure you discharge any electrostatic charge by deliberately touching a heating or water pipe (conductive, grounded material). Please also avoid dirt deposits and oxidation on the contacts by storing your camera in a dry location with the lens cap and flash shoe/viewfinder cap on. · Use only the recommended accessories to prevent faults, short circuits, or electric shock. · Do not attempt to remove parts of the housing (covers); repairs must be done at authorized service centers only.

Legal information: · Please ensure that you observe copyright laws. The recording
and publication of pre-recorded media such as tapes, CDs, or other published or broadcast material may contravene copyright laws. · This also applies to all of the software supplied. · With regard to videos created using this camera: This product is licensed under the AVC Patent Portfolio license for the personal use of a consumer or other uses in which the consumer does not receive remuneration to (i) encode video in compliance with the AVC standard (“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC video. No license is granted or shall be implied for any other use. For more information please visit the MPEG LA, L.L.C. website at http://www.mpgegla.com. Any other use, including but not limited to providing AVC video in exchange for remunera-

tion, may require a separate license agreement with MPEG LA,

Important:

L.L.C. For more information please visit the MPEG LA, L.L.C.

The camera gets warm during use. This is not a malfunction, but

website at http://www.mpgegla.com.

rather due to electronic components such as sensor, processor,

· The SD and USB logos are registered trademarks.

and monitor generating heat when operating. This happens faster · Other names, company and product names referred to in these

when serial exposures are executed in quick succession or repeat-

instructions are trademarks or registered trademarks of the

edly for a longer stretch of time, and especially in the case of video

respective companies.

recording (4K!). In extreme cases, a protection circuit will shut

down the camera. Naturally this will happen the earlier the warmer

112

Disposal of electrical and electronic equipment

EN Meaning of the different categories of information in

Legal information

(Applies within the EU, and other European countries

this manual

with segregated waste collection systems)

Note:

This device contains electrical and/or electronic components and

Additional information

must therefore not be disposed of in general household waste! Instead, it should be disposed of at a recycling collection point provided by the local authority. This costs you nothing. If the device contains standard or rechargeable batteries, these must be

Important: Failure to observe the instructions may cause damage to the camera, accessories or the photos

removed first and also be disposed of in line with relevant regulations. Further information on the subject is available from your local administration, your local waste collection company, or in the

Attention: Failure to observe the instructions may cause personal injury

store where you purchased this device.

The CE identification of our products documents compliance with the fundamental requirements of the applicable EU directives.

The production date of your camera can be found on the stickers in the warranty card and/or on the packaging. The format is: Year/ Month/Day

The specific approvals for this device can be found in the camera menu.

In the main menu, select
Select Select Regulatory information in the submenu.

113

EN TABLE OF CONTENTS

Customizing the MY CAMERA menu ……………………………………………… 136 Setting dial menu…………………………………………………………………………138

Designation of parts ……………………………………………………………………… 109

Locking the setting dial functions……………………………………………………138

Table of Contents

Foreword ……………………………………………………………………………………… 110

Assigning the desired function to the left setting dial………………………….139

Scope of Delivery ………………………………………………………………………….. 110

Accessories ………………………………………………………………………………….. 110 Basic camera settings

Spare parts…………………………………………………………………………………… 110

Menu language …………………………………………………………………………….. 140

Date/time……………………………………………………………………………………. 140

Preparations

Automatic Camera Shutdown………………………………………………………… 141

Attaching the carrying strap………………………………………………………….. 116

Acoustic signals …………………………………………………………………………… 142

Changing the battery ……………………………………………………………………. 117

Monitor/viewfinder settings …………………………………………………………. 142

Charging the battery …………………………………………………………………….. 118

Automatic Monitor Shutdown………………………………………………………… 143

Changing the memory card …………………………………………………………… 122

Attaching/detaching the lens………………………………………………………… 124 Basic picture settings

Compatible lenses………………………………………………………………………… 124

File format/compression rate ……………………………………………………….. 144

White balance………………………………………………………………………………. 145

Camera operation

ISO Sensitivity ……………………………………………………………………………… 146

Main switch …………………………………………………………………………………. 126

JPEG image properties ………………………………………………………………….. 146

Setting dials…………………………………………………………………………………. 126

Shutter button ……………………………………………………………………………… 127 Additional picture settings

Function button……………………………………………………………………………. 127

Image stabilization ……………………………………………………………………….. 148

Gesture control ……………………………………………………………………………. 128

Self-Timer…………………………………………………………………………………….. 148

Locking/unlocking the right toolbar ………………………………………………..129

Recording the location with GPS……………………………………………………. 149

INFO displays………………………………………………………………………………130

Opening the exposure mode/scene mode menu……………………………….131 Picture mode

Opening the MY CAMERA menu …………………………………………………..131

Serial exposures…………………………………………………………………………… 150

Opening the main menu………………………………………………………………..131

Focusing ……………………………………………………………………………………… 150

Main menu structure…………………………………………………………………….131

Autofocus ………………………………………………………………………………….. 150

Opening a menu item in one of the main menu function groups……………131

AF Auxiliary Light ………………………………………………………………………151

Navigation in the main and MY CAMERA menus ………………………………132

Autofocus metering methods/Operating modes……………………………..152

Menu tiles ………………………………………………………………………………….133

Spot/single point metering…………………………………………………………152

Direct setting of function options ……………………………………………………133

Touch AF/Touch AF + Shutter release ………………………………………….154

Selecting a menu item and setting function options in submenus …………134

Multi-zone metering…………………………………………………………………..155

Settings in submenus with setting dials and gesture control ……………….135

Face detection …………………………………………………………………………155

Manual focusing ………………………………………………………………………….156

Auxiliary function for manual focusing …………………………………………..156

114

Exposure metering and control

Review menu …………………………………………………………………………………178

Exposure Metering Methods ………………………………………………………….158

Slide show………………………………………………………………………………….178

Exposure control………………………………………………………………………….158

Marking pictures as favorites/canceling markings……………………………..179

Table of Contents

Program mode – P……………………………………………………………………..159

Protecting pictures/clearing delete protection ………………………………….179

Aperture priority – A …………………………………………………………………..160

Deleting images ………………………………………………………………………… 180

Shutter speed priority – S……………………………………………………………161

Selecting the playback source ……………………………………………………. 182

Manual setting – M…………………………………………………………………….162

Copying picture data between the internal memory and the inserted

Histogram ……………………………………………………………………………….163

memory card …………………………………………………………………………….. 182

Clipping ………………………………………………………………………………….. 164

Video review ………………………………………………………………………………… 184

Scene modes …………………………………………………………………………..165

Cutting and combining video recordings ………………………………………… 186

Metering memory lock……………………………………………………………….166

Exposure compensation……………………………………………………………..166 Miscellaneous

Automatic exposure bracketing……………………………………………………167

User profiles ………………………………………………………………………………… 188

Resetting all custom settings ………………………………………………………… 190

Flash Photography

Resetting the image file numbering ……………………………………………….. 191

Compatible flash units ………………………………………………………………….. 168

Setting up and using the WiFi function …………………………………………… 192

Attaching a flash unit ……………………………………………………………………. 168

Transferring data to a computer ……………………………………………………. 196

Flash modes ………………………………………………………………………………… 169

Formatting …………………………………………………………………………………… 197

Flash range ………………………………………………………………………………….. 170

Using raw data (DNG) …………………………………………………………………… 198

Synchronization time point……………………………………………………………. 171

Installing firmware updates…………………………………………………………… 198

Flash exposure compensation……………………………………………………….. 171

Safety and care instructions……………………………………………………………199

Video recording ………………………………………………………………………………..172

Stabilization…………………………………………………………………………………..173 Appendix

Starting/ending the recording…………………………………………………………..173

Charger adapter plugs ………………………………………………………………….. 203

Sound recording …………………………………………………………………………….173

Main menu…………………………………………………………………………………… 204

Exposure mode menu …………………………………………………………………… 207

Review mode

Continuous review mode ………………………………………………………………. 174 Index ……………………………………………………………………………………………..208

Automatic review …………………………………………………………………………. 174

Viewing Pictures in Portrait Format ……………………………………………….. 175 Technical data………………………………………………………………………………..210

Selecting pictures ………………………………………………………………………… 175

Enlarging/reducing pictures………………………………………………………….. 176 Leica service addresses ………………………………………………………………….212

Simultaneous display of 9 pictures ………………………………………………….176

Selecting a cropped section……………………………………………………………..177

115

Preparations

EN
Fig. 1 a

Fig. 1 b

116

Fig. 1 c

ATTACHING THE CARRYING STRAP

CHANGING THE BATTERY

Preparations

Turning off the camera Fig. 2 a
Inserting the battery Fig. 2 b
Removing the battery Fig. 2 c
Notes: · The battery is supplied pre-charged, which means that you can
start using the camera immediately. · The lock has a retaining mechanism to prevent the battery from
falling out when the camera is held upright.
Important: Removing the battery with the camera turned on can result in your settings being deleted, a loss of picture data, and damage to the memory card.

Fig. 2 a Fig. 2 b

Fig. 2 c

117

EN CHARGING THE BATTERY

· A battery must be removed from the camera or charger immedi-

Preparations

Your Leica TL2 is powered by a Lithium-ion battery. It can be charged while inserted in the camera using the USB cord supplied or outside the camera using the charger supplied.

ately and replaced if it develops noise, becomes discolored, deformed, or overheated or if it shows any sign of leakage. Continued use of a damaged battery may cause overheating and a risk of fire and/or explosion.

· If liquid leaks out or you smell burning, keep the batteries away

Attention: · Only the battery types specified and described in this manual
and/or specified and described by Leica Camera AG may be used in this camera. · This battery may only be used in the units for which it is designed and may only be charged exactly as described. · Using the battery contrary to these instructions and using battery types not specified in these instructions may result in an explosion. · The batteries must not be exposed to sunlight, heat, humidity or condensation for extended periods. Batteries must not be placed in a microwave oven or in a high-pressure vessel, as this may cause an explosion. · Never throw batteries into a fire, as this may cause an explosion! · Damp or wet batteries must not be charged or used in the

from heat sources. Leaked fluid can catch fire. · Only the charger specified and described in this manual, or
chargers specified and described by Leica Camera AG, may be used. The use of other chargers that are not approved by Leica Camera AG can cause damage to the batteries and, in extreme cases, serious or life-threatening injuries. · The charger supplied should be used exclusively for charging this battery type. Do not attempt to use it for other purposes. · Ensure that the power socket used is freely accessible. · Heat is generated during charging. Therefore batteries must not be charged in small, enclosed or unventilated spaces. · The battery and charger must not be opened. Repairs may only be carried out by authorized service centers. · Keep batteries out of the reach of children. Swallowing batteries can cause suffocation.

camera under any circumstances.

· Always ensure that the battery contacts are clean and freely

Dispose of used batteries in line with the information pro-

accessible.

vided in these instructions.

· Whilst lithium ion batteries are secured against short circuits,

they should still be protected against contact with metal objects

like paper clips or jewelry. A short-circuited battery can get very

hot and cause severe burns.

· If a battery is dropped, check the casing and the contacts

immediately for any damage. Using a damaged battery can

damage the camera.

118

First Aid:

· Rechargeable lithium-ion batteries generate power through

· Battery fluid coming into contact with the eyes may cause

internal chemical reactions. This reaction is influenced by ambi-

Preparations

blindness. Immediately rinse the eyes thoroughly with clean

ent temperature and humidity. To maximize the life of the bat-

water. Do not rub the eyes. Seek medical attention immediately.

tery, it should not be exposed to extremely high or low tempera-

· If leaked fluid gets onto the skin or clothing, there is a risk of

tures for long periods (e.g. in a parked car in summer or winter).

injury. Rinse the affected areas with clean water.

· Even with optimum conditions of use, every battery has a limited

service life. After several hundred charging cycles, this becomes

Notes: · The battery is supplied partially charged, but it should be
charged before long periods of use. · In order to charge the battery, it must have a temperature of
between 0°C and 35°C/32°F and 95°F (otherwise the charger may not turn on or off again). · Lithium-ion batteries can be charged at any time, regardless of their current charge level. If a battery is only partly discharged when charging starts, it is charged to full capacity faster. · Lithium ion batteries should only be stored partly charged, i.e. not when fully discharged or fully charged. For very long storage periods, batteries should be charged for around 15 minutes twice a year to prevent total discharge. · The batteries warm up during the charging process. This is normal and not a malfunction. · A new battery only reaches its full capacity after it has been fully charged and by use in the camera discharged 2 or 3 times. This discharge procedure should be repeated roughly every 25

noticeable as the operating times get significantly shorter. · In line with the applicable regulations (see p. 113), defective
batteries should be disposed of at an appropriate collection point for proper recycling. · The replaceable battery supplies another back-up battery that is built into the camera. This back-up battery ensures that the date and time data entered is retained for up to 2 days. If this backup battery runs out it must be recharged by inserting a charged main battery. Once the replaceable battery has been inserted, the full capacity of the back-up battery is recovered after about 60 hours. This process does not require the camera to be turned on. However, the date and time will have to be set again. · Remove the battery if you will not be using the camera for a long period of time. Turn the camera off using the main switch before removing the battery. Otherwise, after several weeks the battery could become totally discharged, i.e. the voltage is sharply reduced as the camera still consumes a small amount of current (for saving your settings) even when it is turned off.

cycles.

119

Preparations

Fig. 3

Fig. 4 a

“click”

120

Fig. 5 a

2. “click”
Fig. 4 b
2.

CHARGING THE BATTERY (CONT.)
WITH USB CABLE Fig. 3 Notes: · The camera should only be connected to a computer or a stan-
dard USB charger (with a maximum charging current of 500 mA or 1 A) and not to a monitor, keyboard, printer, or USB hub. · The USB charging process is only started when the camera is turned off. · If the computer goes into standby mode during charging, this may cancel the charging process.
Important: · Use only the USB cable supplied.
WITH THE CHARGER Changing the mains connector on the charger
Inserting Fig. 4 a/b
Removing Fig. 5 a/b

Fig. 5 b

Inserting the battery in the charger Fig. 6

Removing the battery from the charger Fig. 7
Notes: · The charger must be fitted with the appropriate plug for the local
sockets. · The charger automatically adjusts to the relevant mains voltage.
Charge status displays The charging process is indicated by LEDs. With USB cable (LED on camera) Fig. 8 continuously red: Charging continuous green: Battery fully charged. With charger (LED on charger Fig. 9) flashing red: Fault, no charging continuously red: Charging continuous green: Battery fully charged.
Charge level display Fig. 10 The charge level of the battery inserted is indicated in the monitor. The display flashes if the battery only has capacity for a few more pictures. At this point, the battery should be replaced or recharged.

“click”
Fig. 6
Fig. 8

Fig. 10

EN 2.

Fig. 7
Fig. 9
121

Preparations

Fig. 11 a
2. 1.
Fig. 11 c

Fig. 11 b

CHANGING THE MEMORY CARD SD, SDHC or SDXC memory cards can be used in the Leica TL2. However, thanks to an internal 32 GB memory you can also take photos without a memory card.
Turning off the camera Fig. 11a
Inserting the memory card Fig. 11b
Removing the memory card Fig. 11c

122

Notes:

· The range of SD/SDHC/SDXC cards is too large for Leica

· Do not open the compartment and do not remove the memory

Camera AG to be able to completely test all available types for

Preparations

card or the battery while the LED is lit to indicate that the cam-

compatibility and quality. Although no damage to the camera or

era is accessing the memory. Otherwise, the data on the card

the card is generally expected, because some “no name” cards

may be destroyed and malfunctions can occur in the camera.

may not fully comply with the SD/SDHC/SDXC standards Leica

· SD, SDHC, and SDXC memory cards have a write protection

Camera AG cannot provide any guarantee of function.

switch, which can be used to prevent unintentional storage and · As electromagnetic fields, electrostatic charge, and defects on

deletion of pictures. This switch takes the form of a slider on the

the camera or the card can lead to damage or loss of the data

non-beveled side of the card; in the lower position, marked

on the memory card, we recommend that you also transfer the

LOCK, the data is protected.

data to a computer and save it there.

· If the memory card cannot be inserted, check that it is aligned

correctly.

· If a memory card is inserted, pictures are only saved on the

card. If no card is inserted, the camera stores image data in the

internal memory.

· For 4K video recording (see p. 172), memory cards with fast

read/write speeds should be used, preferrably with at least

Class U3 and/or V30 standard. Using slower cards may result in

the recording being aborted immediately after reaching the

internal buffer capacity limit.

123

Preparations

Fig. 12

3. 2.

124

3. 1.
Fig. 13

ATTACHING THE LENS Fig. 12
DETACHING THE LENS Fig. 13
Notes: · To protect against dust getting into the interior of the camera, it
is important always to have a lens or a cover attached to the camera body. · For the same reason, when changing lenses work quickly and in an environment that is as dust-free as possible. · Camera or lens rear covers should not be stored in your pants pocket as they attract dust that can get into the camera when they are fitted.
COMPATIBLE LENSES All Leica TL lenses essentially have the same external design: they have an external bayonet on the front mount for the lens hood and an internal thread for filters, a setting ring for the distance, a fixed ring with a red index button for changing lens, and a contact strip for transferring information and control signals. Leica TL zoom lenses also have an additional focal length setting ring with its own index. Apart from Leica TL lenses, Leica SL lenses can be attached with their L bayonet to the Leica TL2, making full use of all their functions.

Depth of field

Lens hood

As Leica TL lenses do not have an aperture ring, there is no depth

of field scale. For the corresponding values, refer to the tables on

the Leica Camera AG website.

Preparations

Exposure metering and control with zoom lenses for the Leica TL2
Zoom lenses for the Leica TL2 have a variable maximum aperture opening depending on the focal length set. To prevent incorrect exposures, the desired focal length must be determined before storing the measured value or changing the speed/aperture combination. For further details, refer to the sections under “Exposure metering and control” starting on p. 158. When using non- system compatible flash units, the aperture setting on the flash unit must correspond to the actual aperture.

Picture setting

Transport setting

Leica TL lenses are supplied with optimized lens hoods. Thanks to their symmetrical bayonet, they can be attached quickly and easily including in reverse for space-saving storage. Lens hoods reduce stray light and reflections, as well as preventing damage and dirt on the front lens.

FILTERS
Screw-on filters can be used on lenses for Leica TL2. For the appropriate diameter, refer to the technical data in the relevant lens instructions.

125

Camera operation

EN CAMERA OPERATION
Fig. 14 Fig. 15
126

MAIN SWITCH Fig. 14 The Leica TL2 is turned on and off with the main switch: Red dot visible = Turned off Red dot not visible = Turned on
· The monitor image appears when the camera is turned on. Note: The first time you turn on, or when you turn on after resetting all settings, PLAY appears in the top right of the monitor. Pressing this display starts a welcome video. Playback can be stopped at any time by touching SKIP . The LANGUAGE submenu then appears, and when you have made the settings the DATE/TIME submenu, and finally, once you have made the settings here, the monitor screen.
SETTING DIALS Fig. 15 The two setting dials on the Leica TL2 are allocated different functions in picture, review and menu control modes.

Camera operation

SHUTTER BUTTON Fig. 16

The shutter button works in two stages. Lightly pressing activates both automatic distance setting and exposure metering and control, and stores the relevant settings/values. If the camera was previously in standby mode, this reactivates it and the monitor image appears again. Pressing the shutter button all the way down takes a picture.

FUNCTION BUTTON Fig. 17 You can assign different functions to this button.
Video button (default setting)

Fig. 16

Switching from picture to review mode

Turn on viewfinder permanently Assignment and function are described in the respective sections.

Fig. 17

127

Camera operation

EN
Tap briefly

Tap twice

Long touch, drag and release

GESTURE CONTROL The Leica TL2 is predominantly operated using the gestures listed on the left on the touch-sensitive monitor.
Note: A light touch is enough, do not press.

Swipe

Push together

Pull apart

128

Right toolbar Fig. 18 a/b The symbols at the right edge of the monitor are the entry point for operating the Leica TL2. To prevent unintentional operation, you can disable these symbols.
Disabling Fig. 19 a/b

Picture mode
F2.8 1/8000 ISO 12500 EV
-3 2 1 0 1 2 3+
Fig. 18 a

12MP

8234

INFO

Releasing Fig. 20 a/b

F2.8 1/8000 ISO 12500 EV A

Review mode
F2.8 1/8000 ISO 12500 EV

999-9000

22:45PM 22.02.2012
Fig. 18 b

12MP 8234/9999

INFO

F2.8 1/8000 ISO 12500 EV A

-3 2 1 0 1 2 3+
Fig. 19 a
F2.8 1/8000 ISO 12500 EV

12MP

8234

INFO

-3 2 1 0 1 2 3+
Fig. 19 b
F2.8 1/8000 ISO 12500 EV

12MP

8234

INFO

-3 2 1 0 1 2 3+
Fig. 20 a

12MP

8234

INFO

-3 2 1 0 1 2 3+
Fig. 20 b

12MP

8234

INFO

Camera operation

129

F2.8 1/8000 ISO 12500 EV

F2.8 1/60 A

AWB A

Camera operation

-3 2 1 0 1 2 3+
Fig. 21 a
F2.8 1/60

12MP

8234

INFO

AWB A

Fig. 21 b
F2.8 1/60

16MP

SD 8234

INFO

AWB A

Fig. 21 d

16MP

SD 8234

INFO

Fig. 21 c

16MP

SD 8234

INFO

F2.8 1/8000 ISO 12500 EV

999-9000

F2.8 1/60

ISO 100

AWB 999-9000

22:45PM 22.02.2012
Fig. 22 a
F2.8 1/60 ISO 100

12MP 8234/9999

INFO

AWB 999-9000

Fig. 22 b

F2.8 1/60

ISO 100

16MP

SD 8234

INFO

AWB 999-9000

Fig. 22 d

16MP

SD 8234

INFO

Fig. 22 c

16MP

SD 8234

INFO

INFO displays Repeatedly touching INFO allows you to select the monitor display according to your desired information set.
In picture mode Fig. 21 a-d
1x = Status displays in header and footer 2x = Grid 3x = Histogram 4x = No additional information (default setting)
In review mode Fig. 22 a-d
1x = Status displays in header and footer 2x = Histogram 3x = Clipping and histogram 4x = No additional information (default setting) Notes: · In addition, a distance scale appears when focusing manually. · Details on the histogram and clipping displays, see p.
163/164.

130

Opening the exposure mode/scene mode menu Fig. 23 a/b

F2.8 1/8000 ISO 12500 EV

touch symbol in the toolbar on top

Opening the MY CAMERA menu Fig. 24 a/b

Touch

symbol

This menu can be individually configured with functions from the

main menu. This gives you faster access to the functions you use

most frequently.

-3 2 1 0 1 2 3+
Fig. 23 a
F2.8 1/8000 ISO 12500 EV

12MP

8234

INFO

Opening the main menu Fig. 25 a-c touch symbol in the MY CAMERA menu The main menu provides access to all menu items on the camera.
Main menu structure The 9 tiles of the main menu are the access point to the respective function groups. Each of these groups contain different numbers of menu items.
Accessing the menu items in a main menu function group Fig. 26 a/b Touch the respective tile to call up its menu items.

-3 2 1 0 1 2 3+
Fig. 24 a
F2.8 1/8000 ISO 12500 EV
-3 2 1 0 1 2 3+
Fig. 25 a

12MP

8234

INFO

12MP

8234

INFO

= Back to the previous menu level/setting, or close menu altogether

Fig. 23 b Fig. 24 b Fig. 25 b Fig. 25 c

Camera operation

Fig. 26 a

Fig. 26 b

131

Camera operation

EN
Fig. 27 a

Fig. 27 b

Fig. 28 a Fig. 28 d

Fig. 28 b Fig. 28 c

Navigation in the main and MY CAMERA menus
The camera provides two different options for navigating in the menus, the submenus, and the menu items. With gesture control and setting dials Fig. 27 a/b Using the setting dials (both have the same function in this case)
and gesture control Fig. 28 a-d · Main menu function groups containing more than nine menu
items list these on two pages. This can also be the case in the MY CAMERA menu. If so, a scrollbar appears on the left, indicating the current position within that menu.
Note: Menu items that are not available, e.g. because of other settings, are indicated by a gray display – instead of white – and are skipped.

132

Menu tiles The main menu function groups as well as menu items are displayed in the form of tiles.
Information in the menu item tiles Fig. 29 a Display for a tile without submenu; function options
(max. 5) are set directly Fig. 29 a-d Changing the order of menu items Fig. 29 a-d Name of the menu item and/or the set menu function.
Depending on the scope of the menu item, the tile provides: Direct setting of the function options, or Access to a submenu
Direct setting of function options For menu tiles that can be set directly, the next function option is accessed simply by touching it Fig. 30 a-c.

Fig. 29 a

a b
c Fig. 29 b

b c

Fig. 29 c

Fig. 29 d

a Display for directly selectable function options, number of dots = available options
b Symbol/abbreviation for selected option or value setting c Name of function/tile, or selected option

EN
b c
b c

Camera operation

Fig. 30 a

Fig. 30 b Fig. 30 c

133

Camera operation

EN
Fig. 31 a Fig. 31 b Fig. 31 d
134

Fig. 31 c Fig. 31 e Fig. 31 f

Selecting a menu item and setting function options in submenus Menu items that only have the displays b and c are set using submenus. Their structure differs depending on the function. With gesture control Fig. 31 a-f Swiping scrolls through the submenu list a line at a time. Notes: · Marked submenu items can also be set at any time by touching
SET in the toolbar on the right. · A submenu can include two pages. In such a case, a progress
bar on the left indicates on which page you are at any time.

Settings in submenus with setting dials and gesture control Fig. 32 a-e Using the setting dials (both have the same function in this case) function – can be used to select individual options in submenus.
If you continue turning beyond the first or last submenu option on a page, the submenu list ‘jumps’ by a page, i.e. the next or previous lines appear. This also applies to the start and end of the submenu list (=> “endless loop”).

Fig. 32 a

General comments on menu control · Settings for options that differ from the above explanations or
include additional steps are described in the sections dealing with the relevant options. · Some menu items may not be available, e.g. because the relevant functions have fixed settings in the scene modes, or because the external viewfinder (available as an accessory) they are related to is not attached. These options are then indicated by a gray function icon (instead of white) and cannot be selected. · The menu is normally opened at the position of the last option set.

Fig. 32 b Fig. 32 e

EN
Fig. 32 c Fig. 32 d

Camera operation

135

Camera operation

EN
Fig. 33 a Fig. 33 d

Fig. 33 b Fig. 33 c

Customizing the MY CAMERA menu A number of functions are preset as default in the MY CAMERA menu. Every MY CAMERA menu item’s position in it can be changed, and every menu item in the main menu function groups can be added or deleted. This free menu design allows you to individually configure the camera to match your own needs and provides faster access to the functions you use most frequently.
Adding menu options Fig. 33 a-d Menu items can be added using the gesture .

136

Changing the order of menu items Fig. 34 a-d The menu items are initially displayed in the order of selection. However, this order can be changed at any time.
Deleting menu items Fig. 35 a-c All menu items can be removed from the MY CAMERA menu by dragging them to .

Fig. 34 a

Fig. 34 d

Fig. 35 a Fig. 35 a

EN
Fig. 34 b Fig. 34 c
Fig. 35 b Fig. 35 c
137

Camera operation

EN
F2.8 1/8000 ISO 12500 EV
A

-3 2 1 0 1 2 3+
Fig. 36 a

12MP

8234

INFO

F2.8 1/8000 ISO 12500 EV

ISO P

-3 2 1 0 1 2 3+
Fig. 37 a

12MP

8234

INFO

F2.8 1/8000 ISO 12500 EV

ISO P

-3 2 1 0 1 2 3+
Fig. 36 b

12MP

8234

INFO

F2.8 1/8000 ISO 12500 EV

ISO P

-3 2 1 0 1 2 3+
Fig. 36 c
F2.8 1/16/08000 ISO 12500 EV

12MP

8234

INFO

AWB

-3 2 1 0 1 2 3+
Fig. 37 b

162MP

SD 8234

INFO

Setting dial menu In aperture priority, shutter speed priority and automatic program modes, the right setting dial is assigned the aperture, shutter speed and program shift functions respectively. In these modes, the functions represented by the six tiles shown in Fig. 36 c can be assigned to the left setting dial. The factory default is ISO .
Opening the main menu Fig. 36 a-c The setting dial function displays appear when one of the dials is turned by one detent position. Touching the left function display brings up the available function tiles.
Locking/unlocking the setting dials Fig. 37 a/b The setting dial functions can be locked/unlocked by touching the respective function displays for a long time. This is possible with both setting dials.

138

Assigning the desired function to the left setting dial
With gesture control Fig. 38 a/b
With a setting dial and gesture control Fig. 39 a-f Note: Regardless of which of the function tiles is active in the menu list (outlined in red) any of them can be selected at any time by touching it.

F2.8 1/8000 ISO 12500 EV

ISO P

-3 2 1 0 1 2 3+
Fig. 38 a

12MP

8234

INFO

F2.8 1/8000 ISO 12500 EV

ISO P

F2.8 1/8000 ISO 12500 EV

WB P

-3 2 1 0 1 2 3+
Fig. 38 b

12MP

8234

INFO

F2.8 1/8000 ISO 12500 EV

ISO P

SAET

-3 2 1 0 1 2 3+
Fig. 39 a

12MP

8234

INFO

-3 2 1 0 1 2 3+
Fig. 39 b

12MP

8234

INFO

F2.8 1/8000 ISO 12500 EV

ISO P

SAET

F2.8 1/8000 ISO 12500 EV

ISO P

SAET

-3 2 1 0 1 2 3+
Fig. 39 d
F2.8 1/8000 ISO 12500 EV

12MP

8234

INFO

WB P

-3 2 1 0 1 2 3+
Fig. 39 c
F2.8 1/8000 ISO 12500 EV

12MP

8234

INFO

ISO P

-3 2 1 0 1 2 3+
Fig. 39 f

12MP

8234

INFO

-3 2 1 0 1 2 3+
Fig. 39 e

12MP

8234

INFO

Camera operation

139

Basic camera settings

EN BASIC CAMERA SETTINGS
MENU LANGUAGE
In the main menu, select Select Select the desired language in the submenu
DATE/TIME
In the main menu, select Select Setting the date/time Fig. 40 These settings are made in the same way in all five ‘columns’.

Selecting the time zone Fig. 41 a-c Each touch or drag advances the setting by one time zone.

Fig. 42a Fig. 41 a

Fig. 41 b

Press SET to confirm

Fig. 41 c

Selecting the time format Fig. 42

Fig. 40
Press SET to confirm
140

Fig. 42
Press SET to confirm

Activating/deactivating daylight saving time Fig. 43 a/b

Automatic Camera Shutdown

If this function is activated, the camera switches to energy-saving standby mode after the selected time (1/2/5/10/20 min).

Basic camera settings

Fig. 43 a

Fig. 43 b

· = off, = on

Touch SET to confirm

Note: Even if no battery is inserted or if the battery is flat, the date and time settings are retained for around 2 days thanks to the built-in back-up battery. However, after this time they have to be reset.

In the main menu, select
Select
Notes: · When the camera is in standby mode, it can be turned on at any
time by pressing the shutter button or by turning it off and on with the main switch.

141

Acoustic signals

Monitor/viewfinder settings

Basic camera settings

On the Leica TL2 you can set whether you want particular operations or a full memory card to be indicated by tones, or whether you prefer operation of the camera and photography itself to be largely quiet.
In the main menu, select
Select Select the required settings in the Volume, Click , SD card full,
AF Confirmation submenus (OFF, LOW, HIGH)

For optimum visibility and to adapt to different lighting conditions, the brightness and color reproduction can be adjusted.
Notes: · The operations described below using the example of the moni-
tor settings also apply to the viewfinder settings, i.e. for the EVF BRIGHTNESS and EVF COLOR ADJUSTMENT menu items. If the Leica Visoflex external electronic viewfinder available as an accessory is not attached, these menu options cannot be selected and the relevant function icons are grayed out. · The viewfinder is turned on automatically – and the camera monitor is turned off – as soon as the sensor in the eyepiece detects that you are looking through the viewfinder. However, if menu control is active, this does not happen until you tap the shutter release. You can also switch on the viewfinder with the function button, provided the latter is set accordingly (see next page).

Brightness settings

In the main menu, select

Select

Select AUTO in the submenu (for automatic setting controlled by

the external brightness)

Make the desired setting on the scale in the submenu using or one of the setting dials

142

Color settings Fig. 44

Setting the function button to switch the viewfinder on

permanently

Basic camera settings

In the main menu, select

Select

2. Fig. 44

2. 3.

1. Cursor for current setting 2. Color directions (Y = yellow, G = green,
B = blue, M = magenta)
3. Symbol for resetting to neutral-position
(center)

Use

or the setting dials – vertical with the left, horizontal

with the right – to move the cursor from its initial position in the

center to the position that results in the desired color reproduc-

tion in the monitor/viewfinder image, i.e. towards the corre-

sponding colors displayed at the edges

· The color reproduction in the monitor/viewfinder image

changes according to your setting.

In the main menu, select

, select

Note: With this function active, pressing the function button results in the monitor image never appearing, i.e. regardless of whether or not you are looking through the viewfinder. Pressing the function button again reactivates automatic switching between viewfinder and monitor.

Automatic monitor shutdown This function enables you to select the time after which the monitor is shut down or whether you want it to remain turned on. Shutting down saves power and also ensures that the camera is ready to use more quickly when reactivated.

In the main menu, select Select the required setting in

143

Basic picture settings

BASIC PICTURE SETTINGS

JPEG resolution

When the JPG format is selected, pictures can be taken with 3

File format/compression rate
The JPEG format JPG and the standardized raw data format DNG (= digital negative) are available. They can be utilized both separately and simultaneously.

different resolutions (numbers of pixels). The settings available are 6M, 12M and 24M (M = megapixels). This allows you to adjust the setting precisely to the intended use or to the available memory card capacity.

In the main menu, select
Select the required setting in
DNG compression With the DNG format, you can select either uncompressed, or, in order to reduce file sizes, totally lossless compressed recording.

In the main menu, select
Select the required setting in Note: The DNG format is always stored at the maximum resolution regardless of the JPG settings.

In the main menu, select
Select the required setting in Note: The indicated remaining number of pictures or recording time are an approximation, as the file size for compressed images can vary considerably depending on the subject of the photograph.

144

White balance

Manual setting by metering

Basic picture settings

In digital photography, white balance ensures neutral, i.e. natural, reproduction of color in any light. It is based on the camera being preset to reproduce a particular color as white. You can choose between automatic white balance, various presets, two fixed settings based on selective measurements, and direct setting of the color temperature. 1. Automatic (automatic settings) 2. Daylight (for outdoor pictures in sunshine) 3. Cloudy (for outdoor pictures in cloudy conditions) 4. Shadow (for outdoor pictures with the main subject in shadow) 5. Tungsten (for incandescent bulb lighting) 6. Flash (for illumination with electronic flash) 7. Grey card 1 (memory slot for your own measured results) 8. Grey card 2 (memory slot for your own measured results) 9. Color temp. (memory slot for fixed setting)

In the main menu, select
Select In the 1st submenu, select next to Greycard 1 or Greycard 2
· A yellow frame appears in the center of the monitor with an instruction below it.
Aim the frame at a uniform white or gray object that completely fills the frame
Touch SET to confirm
The camera releases the shutter and carries out metering and storage.
The settings can subsequently be retrieved using Grey card1 or Grey card2.

Fixed presets

In the main menu, select

Direct color temperature setting

Select Select the required setting in the 1st submenu

In the main menu, select
Select In the 1st submenu, select next to Color temp. Select the required value in the 2nd submenu

Selecting white balance functions with the left adjusting dial. If the WB function is assigned to the left adjusting dial, it can be
used to directly select the required option.

145

ISO sensitivity

JPEG image properties (Film Mode)

Basic picture settings

The ISO setting specifies the possible shutter speed and aperture combinations at a particular brightness. Higher sensitivities allow faster shutter speeds and/or smaller apertures (for “freezing” rapid movements or to increase the depth of field), although this can also result in greater noise.
In the main menu, select
Select Select the desired setting in the submenu (i.e. AUTO ISO for the
automatic setting, or one of the eight fixed settings)

One of the many advantages of digital photography is that it is very easy to change critical properties of a picture. On the Leica TL2, you can influence color reproduction, contrast, sharpness and color saturation before taking the picture.
Note: The functions and settings described in the next two sections relate exclusively to pictures in the JPG format. If the DNG file format is specified, these settings have no effect as in this case the image data is always saved in its original format.

If the ISO function is assigned to the left setting dial, it can be used to directly select the required option.
Within the AUTO ISO option it is possible to limit the sensitivity range to be used (e.g. to control noise), and the slowest shutter speed to be used can also be specified (e.g. to prevent blurred pictures of moving subjects):
In the main menu, select
Select Select the Max. exposure time and/or Maximum ISO submenu Select the required settings in the Max. exposure time and/or
Maximum ISO submenus

Color Rendering For the color reproduction, you can select between Standard, Vivid for highly saturated colors and Natural for slightly less saturated colors and a somewhat softer contrast. There are also two black and white settings B&W Natural (natural) and B&W High Contrast (high contrast).
In the main menu, select
Select Select the required setting in the submenu

146

Contrast, sharpness, saturation

For each color reproduction setting, these 3 image properties can also be changed.

In the main menu, select

Basic picture settings

The contrast, i.e. the difference between light and dark sections Select

of the image, determines whether it has a more “flat” or “brilliant” effect. As a consequence, the contrast can be influenced by increasing or reducing this difference, i.e. by lighter reproduction of light sections of the image and darker reproduction of

In the 1st submenu, press for the required color reproduction
In the 2nd submenu Fig. 45, use to adjust the relevant image property, or make the desired setting using the right setting dial

dark sections.

Focus display at least of the main subject using the correct

focusing is a prerequisite for a successful picture. In addition,

the impression of sharpness of a picture is determined by the

edge sharpness, i.e. how small the transition area between light

and dark is at edges in the picture. The impression of being in

Fig. 45

focus can thus be changed by expanding or reducing these

areas.

Touch SET to confirm

When shooting in color, saturation determines whether the colors in the picture tend to appear as “pale” and pastel-like or “bright” and colorful.

· Whenever such a setting has been performed, the relevant color reproduction option is marked in the 1st submenu by an additional asterisk, e.g. Standard*.

147

Basic picture settings

ADDITIONAL PICTURE SETTINGS

Image stabilization
When using Leica SL lenses featuring OIS, your Leica TL2 lets you take advantage of these lenses’ built-in stabilization function. By doing so, you can often achieve sharp pictures at shutter speeds that would otherwise be too slow.

In the main menu, select
Select the required setting in
If the function is assigned to the left setting dial, it can be used to directly select the desired option (see p. 138). · If the self-timer is turned on , , , or is displayed.

In the main menu, select
Select the required setting in Notes: · When using Leica TL lenses, this function is not available, the
respective tile is therefore not accessible, i.e. `grayed out’. · For further information about OIS, see the respective lens’
instructions.
Self-Timer You can use the self-timer to take a picture with a delay of either 2 or 12 s. This is particularly useful for group photographs, where you want to appear in the picture yourself or if you want to avoid the picture being out of focus due to camera shake when releasing the shutter. We recommend that the camera is placed on a tripod. Additionally, you can select whether the self-timer operates only once or for several pictures (Permanent options).

Operation: Press the shutter release all the way down to take the picture · The progress is indicated by the flashing self-timer LED:
12 s delay time: slowly at first, faster for the last 2 s 2 s delay time: As described above for the last 2 s · The remaining time is counted down in the monitor.
Notes: · A delay time in progress can be restarted at any time by press-
ing the shutter button again. The only way to cancel a delay time in progress though is to turn off the camera. · When one of the Permanent options is selected, the function will remain active even after switching the camera off and back on. · It is only ever possible to take single pictures when the self- timer is active, i.e. picture series and automatic bracketing cannot be combined with self-timer mode. · In self-timer mode, the focus and exposure are not set when the shutter button reaches its pressure point, but immediately before the picture is taken.

148

Recording the location with GPS

· It may not be possible to receive good signals from GPS satel-

Basic picture settings

The external LEICA Visoflex (Typ 020) available as an accessory contains a GPS (Global Positioning System) receiver. If the viewfinder is attached, this enables the camera to add the location coordinates to the picture data.

lites at the following locations or in the following situations. In such cases, positioning may not be possible at all, or may be incorrect: in closed rooms underground

Setting the function

under trees in a moving vehicle

In the main menu, select

close to high buildings or in steep valleys close to high voltage cables

Select the required setting in · The “satellite” symbol in the monitor indicates the relevant

in tunnels close to 1.5 GHz mobile telephones

status:

Information for safe use:

GPS off: No display

Make sure the GPS function is deactivated on board an aircraft

GPS on, no reception:

before takeoff or landing, in hospitals or in other locations where

GPS on, reception:

there are restrictions on wireless transmissions.

Notes on the function: · GPS positioning requires as clear a path as possible to at least 3
of the GPS satellites (up to 9 are available from any point on earth). · Make sure that the viewfinder is not covered with your hand or any other item, particularly metal objects.

Important (legal restrictions on use): In certain countries or regions, the use of GPS and associated technologies may be restricted. Therefore, before traveling in other countries you should consult the relevant country’s embassy or your travel agent.

149

EN PICTURE MODE

Focusing

Picture mode

Picture series
The Leica TL2 can be used to take single pictures and series of pictures.

Your Leica TL2 allows automatic as well as manual focusing. There are two automatic modes – AFs (single autofocus) or AFc (continuous autofocus). In both, you can choose between options covering either the complete distance setting range, or only short distances, e.g. to speed up focusing for close- ups.

In the main menu, select Select the required setting in

Automatic focusing (AF/Automatic distance setting)

Notes: · Picture series are taken at a frequency of 7 fps, provided shutter
speeds of 1/60 s and faster are used. · Picture series are not possible when using the flash. If a flash
function is activated, only one picture is taken. · If picture series mode is set and the self-timer is used at the
same time, only a single picture is taken. · After a series of a maximum of 29pictures, the shooting fre-
quency slows down slightly. This is due to the time required to transfer the data from the buffer memory to the card/internal memory. · Regardless of how many pictures are taken in a series, the last picture is always shown first when they are reviewed.

In the main menu, select
Select the desired setting in
If the AF function is assigned to the left setting dial, it can be used to directly select the required option – AFs / AFc or MF . · The set function is displayed in the monitor.
The AFs mode should be used if you want to take photos of subjects that do not, or hardly, move at all. Focus on the area that is to be in focus by applying light pressure to the shutter button (first pressure point). If the subject moves between first tapping the shutter button and the exposure, the desired part of the picture may no longer be in focus. By contrast, the AFc mode should be used if you want to photograph moving subjects. Here, you also focus on the desired area using the first pressure point of the shutter button. While it is being held down to the first pressure point, the camera permanently focuses on the previously focussed area.

150

· A successful AF setting is displayed as follows: The color of the rectangle changes to green with multi-zone metering up to 9 green rectangles appear an acoustic signal can be heard (if activated).

AF auxiliary light

The built-in AF auxiliary light extends the operating range of the AF system in poor lighting conditions. If the function is active, this light comes on as soon as the shutter button is pressed.

Picture mode

Notes: · With the shutter button pressed halfway, it is also possible to
manually change the automatically set distance in autofocus

In the main menu, select

mode with the lens’ distance setting ring. · The setting is stored along with the exposure setting.

Select the required setting in

· In certain situations the AF system is unable to set the distance correctly, e.g. when: The distance to the subject you are aiming at is outside the setting range of the attached lens, and/or

Note: The AF auxiliary light illuminates a range of approximately 4 m. AF mode is therefore not available at distances beyond this limit.

The subject is not sufficiently illuminated (see next section).

These situations and subjects are indicated by:

Color of rectangle changes to red,

With multi-zone metering the display changes to a single red

rectangle

· When using Leica M or R lenses with the Leica M or R Adapter L

available as an accessory, only manual focusing is possible.

· Depending on the Leica TL lens attached, the FOCUS MODE

point is supplemented by the measuring methods AFs Macro

and AFc Macro.

Important: The shutter release button is not locked, regardless of whether or not the focusing is correct for the relevant subject.

151

Autofocus metering methods/Operating modes

Direct operation Fig. 46 a-c

F2.8 1/8000 ISO 12500 EV

For optimum adjustment of the AF system to different subjects,

SET

situations and your compositional ideas, you can choose between

five AF metering methods on the Leica TL2.

Picture mode

In the main menu, select
Select
Select the required setting in the submenu
Spot/single point measurement Both metering methods detect only those parts of the subject within the relevant AF frame. · The metering zones are indicated by a small AF frame. The very small metering zone for spot measurement allows focusing on tiny details of the subject. The slightly longer single point metering zone is less critical when focusing, and therefore easier to handle while still allowing selective measuring. The AF function can also be used for picture series in which the part of the subject you want to be in focus is always at the same off-center point in the image. With both metering methods, you can do this by moving the AF frame, which is otherwise positioned in the center of the monitor screen, to another point. This can be done using menu control or directly.

-3 2 1 0 1 2 3+
Fig. 46 a

12MP

8234

-3 2 1 0 1 2 3+
Fig. 46 b
F2.8 1/8000 ISO 12500 EV

12MP

8234

SET

-3 2 1 0 1 2 3+
Fig. 46 c

12MP

8234

Operation after selecting function from menu
Fig. 47 a-c, d/e

In the main menu, select

In the 1st submenu, press method

for the required metering

The metering zone can then be shifted or moved in two ways.

152

F2.8 1/8000 ISO 12500 EV

SET

-3 2 1 0 1 2 3+
Fig. 47 a

12MP

8234

-3 2 1 0 1 2 3+
Fig. 47 b
F2.8 1/8000 ISO 12500 EV

12MP

8234

SET

F2.8 1/8000 ISO 12500 EV

-3 2 1 0 1 2 3+
Fig. 47 c

12MP

8234

F2.8 1/8000 ISO 12500 EV

SET

-3 2 1 0 1 2 3+
Fig. 47 d

12MP

8234

-3 2 1 0 1 2 3+
Fig. 47 e

12MP

8234

The frame can be reset directly to the center position before confirming Fig. 48 a/b.

F2.8 1/8000 ISO 12500 EV

SET

Note:

In both cases, the metering zones remain at the last positions set

even if the metering method is changed or the camera is turned

off.

Picture mode

Taking photographs 1. Aim the AF frame at the desired subject or move it there
accordingly 2. Press the shutter button to the first pressure point
· The metering system locks on to the registered subject. 3. Keep the shutter button half-pressed until you take the picture
· The AF frame `follows’ the locked subject. 4. Push the shutter button all the way down to take the picture
Notes: · Tracking works regardless of which AF mode (AFs/AFc) is
selected. · Tracking stops when you let the shutter button go. In this case
the metering zone will remain at the last position reached.

-3 2 1 0 1 2 3+
Fig. 48 a

12MP

8234

-3 2 1 0 1 2 3+
Fig. 48 b

12MP

8234

153

Touch AF/Touch AF + Shutter release

Pictures

Picture mode

In this mode, the AF frame can be moved for every picture, without additional settings in the menu. The metering characteristics and metering zone size correspond to single point metering.

In this case, the focusing process does not start when the shutter button is pressed to the 1st pressure point but immediately when you touch the monitor. In addition, the Touch AF + Release function can be used to focus and automatically take a picture with just

In the main menu, select

one touch. Note:

Select Select Touch AF or Touch AF + Release in the submenu

The metering zone remains at the last point determined, even after turning off the camera.

Moving the metering zone Fig. 49 a/b Touch the monitor at the required position in the image field

F2.8 1/8000 ISO 12500 EV

-3 2 1 0 1 2 3+
Fig. 49 a

12MP

8234

INFO

-3 2 1 0 1 2 3+
Fig. 49 b

12MP

8234

INFO

· The AF frame ‘jumps’ to the selected position.

154

Picture mode

Multi-zone metering

Face detection

This metering method detects the subject using a total of 49 zones. Focusing is carried out automatically on the parts of the subject at the shortest distance, thus providing maximum reliability for snapshots. The zones used are indicated with AF frames.

In this mode, your Leica TL2 automatically detects faces in the picture and focuses on the one at the shortest distance. If no faces are detected, multi- zone metering is used.

In the main menu, select
Select Select Multi Point in the submenu

In the main menu, select
Select Select Face Detection in the submenu

155

Manual focusing

· Marking of clearly focused subjects (focus peaking): Edges of

Picture mode

For certain subjects and situations, it can be beneficial to set the focus yourself, rather than using autofocus. For example, if you are using the same setting for several pictures and it would be more work to use metering memory lock, or if you want to keep the setting at infinity for landscape pictures, or if you want to allow no or only a slower AF mode in poor, i.e. very dark, lighting conditions.

sharply rendered subject parts are marked red, making it easy to identify the best setting. · Enlarged display of a central section: Reason: The larger details of the subject appear in the monitor, the more accurately you can assess their sharpness and the more precisely you can focus. The default setting is focus peaking on, but you can select the

In the main menu, select

enlargement function instead, or choose to utilize both simultaneously.

Select MF in

Selecting the function

Manual focusing is carried out using the corresponding ring on the lens. The optimum setting is reached when the monitor screen shows the key part(s) of your subject as you want them to appear.

In the main menu, select

Note: Manual focusing is – with the shutter button pressed down half-way – possible in autofocus mode as well.
Auxiliary function for manual distance setting To make it easier to make the setting and to increase accuracy, the Leica TL2 provides you with two useful tools.

Select the desired setting in

Focusing Fig. 50 a/b Determine your trimming

F0.0 1/100

ISOAUTO

AWB

ISO

Fig. 50 a

16MP

SD 8234

INFO

156

Rotate the lens’ focusing ring

Notes:

· All sharply rendered subject detail edges are marked in red.

· Focus peaking is based on subject contrast, i.e. differences

Picture mode

This happens according to the principle maximum contrast =

between bright and dark.

sharp. Alternatively or additionally (see previous page), the

· If you are using the Leica M- or R-Adapter L, the left setting dial

monitor image switches to a 3x magnification mode. Also, a

assignment changes to FOCUS AID x3, x6 or Off!

display appears indicating both the present (marked in white) · In autofocus mode, too, the automatically set distance can be

and the second available magnification factor.

altered manually with the distance setting ring when the shutter

Touching the unmarked factor leads to a 6x magnification, or

release is pressed halfway.

switches between the two.

The enlargement level that appears first is always the last one

used. Approx. 5 s after the focusing ring was turned the last

time, the camera automatically switches back to the original

monitor image. This can also be initialized at any time by

pressing the shutter button to the 1st pressure point.

Set the correct focus for the desired subject parts

F2.8 1/8000 ISO 12500 EV A
x3
1 x6

0,3 -3 2 1 1 0

1 2 3+

Fig. 50 b

2 m

INFO

12MP6

82f3t4

1 x3-/x6 displays for changing enlargement
2 Distance scale, the bar indicates the current setting (only appears in conjunction with the status displays, see ‘INFO displays’)

157

EXPOSURE METERING AND CONTROL

Spot metering –

This metering method is concentrated exclusively on a small area

Picture mode

Exposure Metering Methods

in the center of the image. It allows exact measurement of small or

Your Leica TL2 offers three exposure metering methods to adapt to tiny details for precise exposure – preferably in conjunction with

prevalent lighting and other conditions like your working methods

manual setting.

or compositional ideas:

For backlit pictures, for example, you normally need to prevent the brighter surroundings causing underexposure of the main subject.

In the main menu, select

The much smaller metering field with spot metering enables these subject details to be selectively evaluated.

Select the required setting in
Multiple field metering With this metering method, the camera automatically analyses the brightness differences in the subject and, by comparing them with programmed brightness distribution patterns, arrives at the likely position of the main subject and the corresponding best exposure. As a result, this method is particularly suitable for spontaneous, uncomplicated, and yet reliable photography, even under difficult conditions and therefore for the cameras automatic program mode.
Center-weighted metering This metering method allocates the highest weighting to the center of the image field, but also records all other areas. Particularly when used in conjunction with metering memory lock, it allows the exposure to be selectively adjusted to specific sections of the subject, while simultaneously taking into account the entire image field.

Exposure control
Your Leica TL2 offers four exposure modes for optimized adjustment to the relevant subject or your preferred working method.
Notes: · Depending on the prevailing light conditions, the brightness of
the monitor image can differ from that of the actual pictures taken. Particularly for long exposures on dark subjects, the monitor image appears considerably darker than the – correctly exposed – picture. · When using Leica M or R lenses with the Leica M Adapter L or the Leica R Adapter L (available as accessories), only aperture priority and manual setting are available, i.e. the automatic program (P), shutter speed priority (S) and the scene modes are not available. If one of these modes is selected, the camera automatically switches to aperture priority mode when the adapter is attached. The mode displayed in the monitor also changes to A. The aperture value displayed is F0.0.

158

Program mode – P

Changing the specified shutter speed/aperture combina-

For fast, fully automatic photography. The exposure is controlled by tions (Shift)

Picture mode

an automatic shutter speed and aperture setting.

Changing the preset values using the Shift function combines the

reliability and speed of fully automatic exposure control with the

Setting the mode

opportunity to vary the speed/aperture combination selected by the camera at any time to fit in with your own ideas and intentions.

Open the exposure mode/scene mode menu

This is done using the right setting dial. If you prefer to use faster

Select

speeds, e.g. for sports shots, turn it to the left. On the other hand, if you prefer a larger depth of field, for landscape shots for

Taking a picture Press the shutter button to the 1st pressure point

example, and are prepared to accept the resulting shower shutter speeds, turn it to the right.

· Both the shutter speed and aperture value are displayed in white. If even a completely open or closed aperture combined with the fastest or slowest shutter speed will result in under- or overexposure, both values are displayed in red.

The overall exposure, i.e. the brightness of the image, remains unchanged. The adjustment range is limited to guarantee correct exposure. · Shifted pairs of values are indicated by a + next to the shutter
speed.

If the automatically calculated pair of values appears to be appropriate for the intended composition:

To prevent accidental use, the values revert to the default settings after each picture, and also when exposure metering is automatically deactivated after 12 s.

Press the shutter button all the way down to take the picture

159

Aperture priority – A

If the automatically calculated shutter speed appears appropriate

Aperture priority mode sets the exposure automatically according for the intended composition:

Picture mode

to the manually selected aperture. It is particularly suitable for pictures where the depth of field is a critical compositional ele-

Press the shutter button all the way down to take the picture

ment.

By selecting an appropriately low aperture value, you can reduce

the depth of field range, for example in a portrait to “isolate” the

face which is in focus from an unimportant or distracting back-

ground, or conversely you can use a higher aperture value to

increase the depth of field range, so that everything from the

foreground to the background will be sharp in a landscape shot.

Setting the mode Open the exposure mode/scene mode menu

Select
Taking a picture Select the required aperture value with the right setting dial, Press the shutter button to the 1st pressure point
· Both the set aperture value and the automatically calculated shutter speed are displayed in white. If even the fastest or slowest shutter speed combined with the set aperture will result in under- or overexposure, both values are displayed in red.

160

Shutter speed priority – S

If the automatically calculated aperture value appears to be appro-

Shutter speed priority mode sets the exposure automatically

priate for the intended composition:

Picture mode

according to the manually selected shutter speed. It is therefore particularly suitable for pictures of moving subjects, where the

Press the shutter button all the way down to take the picture

sharpness of the movement depicted is a critical compositional

element.

An appropriately fast shutter speed will avoid undesirable blurring

of the movement, i.e. “freeze” your subject or you can use a slower

shutter speed to express the dynamic nature of the movement with

a deliberate “blur effect”.

Setting the mode Open the exposure mode/scene mode menu

Select

Taking a picture Select the required shutter speed with the right setting dial, Press the shutter button to the 1st pressure point
· Both the set shutter speed and the automatically calculated aperture value are displayed in white. If even the lowest or highest aperture value combined with the set shutter speed will result in under- or overexposure, both values are displayed in red.

161

Manual setting – M

If the set values and/or the exposure appears to be appropriate for

If, for example, you want to achieve a particular effect that is only

the intended composition:

Picture mode

possible with a very specific exposure, or if you want to ensure that several pictures with different trimming have an absolutely identical Press the shutter button all the way down to take the picture

exposure, then you can set the shutter speed and aperture manu- Note:

ally.

The monitor image displays an exposure simulation for manual

setting.

Setting the mode

Open the exposure mode/scene mode menu

Select
Taking a picture Select the required aperture value with the left setting dial, Select the required shutter speed with the right setting dial Press the shutter button to the 1st pressure point
· Both the shutter speed and aperture value are displayed in white. The light balance scale also appears. It covers a range of ± 3EV (exposure value) in 1/3EV increments. Settings within ± 3EV are indicated by white lines on the scale, settings outside this range by red lines.
Adjust the settings for correct exposure so that the central mark is displayed in white.

162

Picture mode

Histogram and clipping displays

The histogram can also be moved to the bottom right corner of the

The Leica TL2 provides you with two displays that make it easy to

monitor screen Fig.51 a/b.

determine not only a correct exposure, but also to create a picture

with the desired rendition. Together, they allow quick and easy

F2.8 1/60

assessment of the exposure setting.

AWB A

F2.8 1/60

AWB A

Histogram The histogram depicts the brightness distribution in the picture. The horizontal axis shows the brightness values from black (left) through gray to white (right). The vertical axis corresponds to the number of pixels at each brightness level. This form of representation in conjunction with the impression of the picture itself provides an additional quick and easy assessment of the exposure setting. The histogram is available in both picture and review mode.
For picture mode see p. 24 Fig. 21d
INFO 3x
For review mode see p. 24 Fig. 22 b/c
INFO 2x

Fig. 51 a

16MP

SD 8234

INFO

Fig. 51 b

16MP

SD 8234

INFO

In addition to the black&white histogram, in review mode you also have the option of an RGB histogram, in which the brightness values for the three colors red, green, and blue are represented separately:

In the main menu, select

Select

the required setting in

163

Clipping

Notes on the histogram and clipping displays:

Picture mode

In review mode, the flashing red clipping display indicates `blown out’, i.e. overexposed parts of a picture. Thus, it serves as a very simple and precise instrument for selecting and adjusting the exposure setting.

· For a picture with flash, the picture histogram cannot represent the final exposure as the flash is fired after the display.
· In picture mode, the histogram should be regarded as a “trend indicator” and not as a depiction of the exact numbers of pixels.
· The histograms when reviewing and taking a picture may differ

INFO 3x

slightly from one another.

see p. 130 Fig. 22 d

· The histogram and clipping displays always refer to the currently

shown picture section.

· The review histogram and the clipping display are available when

showing the complete picture as well as just a section, but not in

the case of simultaneous display of 9 reduced pictures.

· The clipping display is not available for videos.

164

Ssene modes

Picture mode

The Leica TL2 provides nine “advanced” automatic program options for exceptionally easy and reliable photography. The tenth option – is an automatic snapshot setting for general use. The other nine are designed for the specific requirements of frequently occurring subject types. In all cases, a range of additional functions are automatically controlled in addition to the shutter speed and aperture.

Setting the mode Open the exposure mode/scene mode menu

Select

Select the required scene mode

Taking a picture As in automatic program mode
Notes: · The Program Shift function is not available. · The two setting dials have no function.

165

Metering memory lock

Picture mode

For composition reasons, it can be beneficial not to have the main subject in the center of the picture. In these cases, metering memory lock – in exposure modes P, S and A, and single zone and spot metering AF modes and focusing by touch – allows you to first take a reading for the main subject and then retain the relevant settings until you have selected your final trimming and are ready to take the picture.

In the main menu, select
Select In the submenu, make the desired setting on the scale using
or one of the setting dials Press SET to confirm

Taking a picture with this function: Aim the relevant AF frame at the part of your subject you want to
adjust the sharpness and exposure to. Press the shutter button to the first pressure point to set and
store the sharpness and exposure. Keep the shutter button half-pressed and move the camera to
set your final trimming. Press the shutter button all the way down to take the picture
Exposure compensation Some subjects consist predominantly of areas of above or below average brightness, for example extensive areas of snow or, conversely, a full-format black steam locomotive. In P, S, and A exposure modes, it may be more useful in such cases to set an appropriate exposure compensation instead of using metering memory lock for each picture. The same applies if you want to ensure an identical exposure for several pictures. Values of + 3 to – 3EV are available in 1/3 EV increments.

If the EV function is assigned to the left setting dial, it can be used to directly select the compensation value.
· If a compensation value is set, it is displayed in the monitor, e.g. EV+3. During setting, you can observe the effect on the monitor image, which gets darker or lighter.
Notes: · When setting the exposure manually, exposure compensation is
only possible using the menu. · A set exposure compensation remains active even after any
number of pictures and even after turning off the camera, until it is reset to ± 0 (= center of scale).

166

Picture mode

Automatic exposure bracketing

Notes:

High contrast subjects that have both very bright and very dark areas can have very different effects depending on exposure. The automatic bracketing function enables you to take a series of three pictures with graduated exposure. You can then select the best picture for further use.

· Depending on the exposure mode, the graduations are produced by changing the shutter speed (P /A/M) or the aperture (S).
· The sequence of the pictures is: correct exposure/underexposure/overexposure.
· Depending on the available shutter speed/aperture combination, the working range for automatic bracketing may be limited.

In the main menu, select

· Once set, bracketing remains active even after any number of releases and even after turning off the camera, i.e. until it is

Select

reset to ±0 (= center of scale).

In the submenu, make the desired setting on the scale using

or one of the setting dials

Press SET to confirm · If bracketing is set, this is indicated by in the monitor. While
the three pictures are being taken, you can observe the effect as the monitor screen becomes darker or lighter accordingly.

167

EN FLASH PHOTOGRAPHY

The flash unit should be set to TTL mode to allow automatic con-

Picture mode

COMPATIBLE FLASH UNITS
The following flash units enable TTL flash metering and, depending on their feature set, a varying number of the functions described in these instructions. · The Leica system flash units SF 40, SF 64, and SF 58. · Other Leica system flash units, except the Leica SF 20.

trol by the camera. When set to A, above- or below-average brightness subjects may not be exposed correctly. When set to M, the flash exposure must be controlled by manually setting a flash output level appropriate for the aperture and shutter speed settings determined by the camera. · The display for the set flash mode appears in white (see next
pages). The flash mode will blink red if the flash unit is not fully

Other commercially available flash attachments with standard flash

charged and therefore not ready.

foot and positive center contact, and fired by thecenter contact (X contact) can also be used. We recommend the use of modern thyristor-controlled electronic flash units.

The camera determines the correct flash output by firing one or more pre- flashes fractions of a second before the actual exposure. Immediately afterwards, i.e. during the exposure, the main flash is

fired. All parameters that influence the exposure (e.g. filters,

ATTACHING A FLASH UNIT

changed aperture settings) are automatically taken into account.

Turn off the camera and the flash unit. Slide back the cover that protects the accessory shoe on the
camera when not in use. When attaching, make sure that the flash unit’s foot is fully
inserted into the accessory shoe and, if available, secured against falling out with the clamping nut. This is important because changes of position in the accessory shoe can break the required contacts, causing malfunctions.

Notes: · The flash unit must be ready to flash, otherwise faulty exposures
may result and the camera may generate an error message. · Serial exposures and automatic bracketing with flash are not
available. In these cases, even if a flash unit is attached and switched on, a flash mode display will not appear and no flash will be fired. · Simultaneous use of a flash unit and the Leica Visoflex electronic viewfinder is not possible.

168

1However, if flash units not specially designed for the camera are used that do not automatically set the white balance on the camera, the Flash setting should be used (see p. 145).

FLASH MODES

Automatic flash and pre-flash activation

Picture mode

Selecting the mode:
In the main menu, select
Select Select the required setting in the submenu
· The flash mode display changes accordingly.

To reduce the “red eye” effect in photographs of people with flash. If possible, the people should not look directly at the camera. As the effect is exacerbated when the pupils are wide open in low light conditions, you should turn on as much room lighting as possible when taking photographs indoors, for example. The pre-flash, which is fired shortly before the main flash when you press the shutter button, narrows the pupils of people looking at the camera thereby reducing the effect.

If the function is assigned to the left setting dial, it can be used to directly select the required option. · The set mode is displayed in the monitor.
Note: If no system compatible flash unit is attached, this setting is not available and the function therefore grayed out.
Automatic flash activation This is the default mode. An attached and switched on flash unit is fired automatically whenever slower shutter speeds could lead to blurred pictures in poor lighting conditions.

Manual flash activation
For backlit pictures, in which your main subject does not fill the entire frame and is in shadow, or in situations where you want to moderate high contrasts (e.g. in direct sunlight) (fill in flash). As long as this mode is activated, an attached and switched on flash unit will fire each time you take a shot, whatever the prevailing lighting conditions. The flash power depends on the metered ambient brightness: in poor light it is the same as in automatic mode, with a reduced power as the brightness increases. The flash then works as a fill-in light, e.g. to light up dark shadows in the foreground or backlit subjects and in order to create more balanced overall lighting.

Manual flash and pre-flash activation For a combination of the situations and functions described above.

169

Automatic flash activation with slower shutter speeds

Automatic flash and pre-flash activation with slower shutter

speeds

For simultaneous and more appropriate, i.e. brighter, rendition of

dark backgrounds and for fill-in flash for the foreground.

For a combination of the situations and functions described above.

Picture mode

Explanation: To minimize the risk of blurring, the shutter speed is

Note:

not extended beyond 1/30 s in the other flash modes. This is why in To prevent blurred pictures with the slower shutter speeds in ,

flash shots, objects in the background not illuminated by the flash and

modes, you should hold the camera steady, i.e. rest it

are often badly underexposed.

on something or use a tripod. Alternatively, you can select a higher

To take adequate account of the available ambient light, the slower sensitivity.

shutter speeds required in such situations (up to 30 s) are allowed

in this mode.

Flash range

Notes:

The usable flash range depends on the aperture and sensitivity

· Depending on the AUTO ISO SETTINGS (see p. 146) , it is

values set manually or calculated by the camera. To ensure that the

possible that the camera will not support slower shutter speeds flash light provides sufficient illumination, it is essential that the

as in such cases increasing the ISO sensitivity takes priority.

main subject is within the relevant flash range.

· The desired slowest shutter speed can be set in the Slowest

Speed (see p. 146) item.

170

Synchronization time point

Flash exposure compensation

Picture mode

Flash photographs are always illuminated by two light sources, the available light and the light from the flash. The time at which the flash is fired normally determines where the parts of the subject illuminated exclusively or predominantly by the flash are shown in the frame. The conventional flash firing point at the beginning of the exposure can lead to apparent contradictions, e.g. a vehicle being “overtaken” by the light trail from its own tail lights. Your Leica TL2 allows you to choose between this conventional flash firing point and the end of the exposure:
In the main menu, select

This function can be used to selectively reduce or strengthen the flash exposure regardless of the exposure from available light, e.g. in a picture taken in the evening, to lighten the face of a person in the foreground while retaining the lighting atmosphere.
In the main menu, select
Select In the submenu, make the desired setting on the scale using
or one of the setting dials Touch SET to confirm
· If a compensation is set, this is indicated by in the monitor.

Select the required setting in
In the example cited, the light trail from the tail lights then follows the vehicle as expected. This flash technique gives a more natural impression of movement and dynamics.
Note: When using the flash with faster shutter speeds, in terms of the image there is no difference, or only a difference for rapid movements between the two flash firing points.

Notes: · Flash exposure compensation changes the range of the flash
unit. · Once set, compensation remains active even after any number
of pictures and even after turning off the camera, until it is reset to ± 0 (= center of scale). · Compensation values set in the camera’s menu system are not effective as soon as one is set on an attached and accordingly featured flash unit such as the Leica SF64.

171

Picture mode

EN VIDEO RECORDING

Note:

You can also use the Leica TL2 to make video recordings. Switching between picture and video preview modesis possible via gesture control Fig. 52 a/b.

For 4K video recording, memory cards with fast read/write speeds should be used, preferrably with at least Class U3 and/or V30 standard. Using slower cards may result in the recording being aborted immediately after reaching the internal buffer capacity

Picture mode

Video preview mode

limit.

F2.8 1/8000 ISO 12500 EV

F2.8 1/8000 ISO 12500 EV A

ISO sensitivity

All settings available in the menu.

-3 2 1 0 1 2 3+
Fig. 52 a

12MP

8234

INFO

-3 2 1 0 1 2 3+
Fig. 52 b

12MP

8234

Notes: · As only part of the sensor surface is used, the effective focal
length is increased in each case, i.e. the field of view becomes correspondingly smaller. · Uninterrupted video recordings are possible up to a maximum length of 7/29 minutes (4K/all other resolutions). The maximum file size is 4 GB. If a recording exceeds this limit, the respective part is automatically stored in another file (a.s.o.).

For video recordings, the following functions are available:

Resolution

In the main menu, select

Select the desired setting in

, i.e. either 4K, or 1080p for

full-HD’ recording, or 720p forHD’ recording, or SLOMO for

slow motion recording

Distance setting: All options described on pages 150-156.
Exposure Metering Methods All options described on page 158
Exposure control This is totally independent of the exposure mode and the shutter speed and aperture settings made for photos. Shutter speed: Depending on the selected resolution Aperture: Automatic (automatic settings) If correct exposure is not possible even with the maximum
aperture, the ISO sensitivity is automatically increased – regardless of any manual setting.
Note: The automatic exposure control takes all brightness fluctuations into consideration. If you do not want this, e.g. for landscape pictures and pan shots, you should set the shutter speed manually.

172

Film presets, contrast, sharpness, color saturation:

Starting:

Picture mode

All options described on pages 146 but in this case only the white balance, contrast, saturation, and sharpness settings are changed.
Stabilization

Press the function/shutter button · A video recording in progress is indicated by a flashing red dot. The remaining recording time is also displayed.
Ending:

In the main menu, select

Press the function/shutter button again

Select the required setting in
Note: When using video stabilization, the trimming is slightly reduced compared to operation without stabilization.

Sound recording Sound is recorded in stereo with the built-in microphones.
To reduce any noise caused by wind during sound recording, a damping function is available:

Starting/ending the recording
In the default setting, the function button serves as video release. If, on the other hand, one of the other optional functions is assigned to this button, two possible procedures are available: To utilize the function button as video release, it must be reset accordingly.

In the main menu, select

, select

In the main menu, select
Select the required setting in
Note: Both autofocus and changing the focal length on zoom lenses produce noises that may be picked up in the recording. To prevent this, you should not use either of these functions while recording is in progress – only adjust the focus manually and do not change the focal length.

If you prefer not to change the existing function button setting, you can utilize the shutter button as an alternative after calling up the video screen with gesture control.

173

Review mode

EN REVIEW MODE
Continuous review mode Switching between picture and continuous review modes can be performed in two ways.

With gesture control Fig. 53 a/b
Picture mode
F2.8 1/8000 ISO 12500 EV A

Review mode

· If the memory card or internal memory does not contain any image files, No valid image to play appears.
· If you have used the picture series function or automatic bracketing, the last or last saved picture in the series is displayed first – if not all pictures in the series have been overwritten by the camera’s internal back-up memory yet.
· It may not be possible to view files that were not created on this camera.
· In some cases, the monitor image may not have the usual quality or the monitor will remain blank and only display the file name.

-3 2 1 0 1 2 3+
Fig. 53 a

12MP

8234

INFO

Fig. 53 b

Using the function button In the default setting, the function button serves as video release. To use it to switch between picture and review modes, it must be reset accordingly.

In the main menu, select

, select

Notes: · You can switch back from review mode to picture mode at any
time by tapping the shutter button. · From the menu, you must select picture mode first before you
can switch to review mode. · In review mode you can select whether you want to view the
pictures on the card or pictures saved in the internal memory.

Automatic review You can automatically review every picture immediately after taking it with the AUTO REVIEW function.
In the main menu, select
Select Select the required function or duration in the DURATION
submenu Select the desired setting in the HISTOGRAM submenu Note: Portrait format pictures displayed using AUTO REVIEW are initially shown with no rotation even if the AUTO ROTATE function is active. You can use to rotate the picture.

174

Review mode

VIEWING PICTURES IN PORTRAIT FORMAT

If the camera was held horizontally when taking the picture, the picture is also displayed this way. For portrait pictures, i.e. taken with the camera held vertically, this may not be practical when viewing with the camera held horizontally, if the monitor screen is not displayed as an upright picture.

Fig. 54 c

Fig. 54 d

In the main menu, select
Select Select the desired setting in the submenu
If On is selected, pictures in portrait format are automatically displayed upright. Notes: · Portrait format pictures displayed upright are necessarily signifi-
cantly smaller. · This function is not available with AUTO REVIEW.
SELECTING PICTURES With gesture control Fig. 54 a/b-c/d

With left setting dial Fig. 55 a/b

Fig. 55 a

Fig. 55 b

Swiping to the right or turning the setting dial to the right selects the pictures with higher numbers, swiping to the left or turning the setting dial to the left selects those with lower numbers. In each case, the pictures are displayed in an endless loop. When the last picture is reached, the first is displayed again.

Fig. 54 a

Fig. 54 b

175

ENLARGING/REDUCING PICTURES

Note:

Being able to enlarge a picture being reviewed makes it possible to get a better idea of how in focus it is. Pictures can be enlarged and

Touching the corresponding point on the monitor determines which part of the picture is enlarged.

Review mode

reduced using the / gestures Fig. 56 a/b or the right setting

dial Fig. 57 a/b. The gesture gives you the maximum enlargement Simultaneous display of 9 pictures

in two stages Fig. 58 a-c.

Viewing 9 reduced pictures enables you to get an overview or to

find the picture you are looking for more quickly Fig. 59 a/b /Fig. 60

a/b.

Fig. 56 a Fig. 57 a Fig. 58 a

INFO
Fig. 56 b
INFO
Fig. 57 b
INFO
Fig. 58 b

176

Fig. 58 c

Fig. 59 a

INFO
Fig. 59 b

INFO

Fig. 60 a

Fig. 60 b

Notes: · Enlarging cannot be performed on videos. · In the enlarged/9 picture display, additional information cannot
be called up. · The more the picture is enlarged, the more the reproduction
quality deteriorates due to the proportionately lower resolution. · It may not be possible to enlarge pictures taken using other camera types.

Selecting a picture in the 9 picture view Fig. 61 a/b

SELECTING THE TRIMMING Fig. 64 a/b

In an enlarged picture, you can move the enlarged trimming away from the center, e.g. to check reproduction of subject details outside the center.

Review mode

Fig. 61 a

Fig. 61 b

Exiting the 9 picture view Fig. 62 a/b / Fig. 63 a/b

Fig. 62 a

Fig. 62 b
F2.8 1/8000 ISO 12500 EV

Fig. 64 a

Fig. 64 b

· The approximate position of the detail in the picture is indicated.

INFO

Fig. 63 a

-3 2 1 0 1 2 3+
Fig. 63 b

12MP

8234

IINNFFOO

177

REVIEW MENU

Slide show

Review mode

The review menu contains a range of functions, which can be set using submenus.
Opening the review menu Fig. 65 a/b

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

On the Leica TL2 you can make a setting so that pictures will automatically be shown in a sequence. Within this function, you can specify whether all the pictures are to be displayed, or only those marked as favorites. Or only photos, or only videos. In addition, you can select the time for which pictures will be displayed, and whether the slide show will be repeated until you cancel it. The slide show submenu appears when you open the review menu.

Fig. 65 a

INFO

DURATION

FAVORITE ONLY

REPEAT

Fig. 65 b

The subsequent operations are carried out in the relevant submenus:

Settings in and DURATION

REPEAT

As an alternative to the pure gesture control shown here and on the following pages, individual operations can also be carried out using the setting dials Fig. 66 a/b /Fig. 67 a/b.

Start with,

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

FAVORITE ONLY

Note: Your settings in DURATION and REPEAT are retained even when you turn the camera off and back on.

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

DURATION

FAVORITE ONLY

REPEAT

Fig. 66 a

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

DURATION

FAVORITE ONLY

REPEAT

Fig. 66 b

Exiting the slide show Fig. 68 a/b

178

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

DURATION

FAVORITE ONLY

REPEAT

Fig. 67 a

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

DURATION

FAVORITE ONLY

REPEAT

Fig. 67 b

Fig. 68 a

INFO
Fig. 68 b

Marking recordings as favorites/canceling markings

Marking individually Fig. 69 a-c

You can mark any recording as favorite, e.g. so you can find it more quickly.

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

SINGLE

MULTI

Review mode

Protecting recordings/clearing delete protection Recordings that you want to protect from accidentally being deleted can be marked.
The operations used to mark and protect are the same, the only difference is the way you enter the relevant submenus: for favorites, for protection. The operations are described here for favorites as an example.

DURATION

FAVORITE ONLY

REPEAT

Fig. 69 a

Fig. 69 b
FAVORITE SET

Fig. 69 c
At the 3rd step, as an alternative to touching also be carried out by touching SET.

, marking can

179

Marking multiple Fig. 70 a-c

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

SINGLE

MULTI

Deleting Images
Pictures on the memory card and in the internal memory can be deleted at any time, either individually, several at a time, or all at once.

Review mode

DURATION

FAVORITE ONLY

REPEAT

Fig. 70 a

Fig. 70 b
FAVORITE

Fig. 70 c
Deleting marking(s) At the 3rd step, markings can be cleared by touching or again.
Notes: · If you attempt to delete protected pictures, warning messages
appear. If you still want to delete these pictures, clear the protection as described above. · Even protected pictures are deleted when you format the memory card.

Opening the delete menu Fig. 71 a/b

Fig. 71 a

INFO

Delete Single Multi
All

Fig. 71 b

Deleting single pictures Fig. 72 a/b

Delete Single Multi
All

F2.8 1/8000 ISO 12500 EV

Fig. 72 a

-3 2 1 0 1 2 3+
Fig. 72 b

12MP

8234

INFO

180

Deleting multiple pictures Fig. 73 a-e
Delete Single Multi

Notes:

· For SINGLE only:

After deleting, the next picture appears. If the picture is pro-

tected, it continues to be displayed, and the message This image

Review mode

All

is protected appears briefly.

· For MULTI only:

Fig. 73 a

Fig. 73 b

Pictures already marked as protected cannot be marked for deleting. If you attempt to do this, a corresponding message

SET Do you really want
to delete all marked images?
NO
YES

SET

appears briefly.

· For ALL only:

When deleting is complete, the message No valid image to play

appears. If deleting cannot be carried out, the original picture is

Fig. 73 d

Fig. 73 c

displayed again. · When deleting multiple or all pictures, a corresponding informa-

tion screen may appear due to the time required to process the

data.

· If the pictures included some with delete protection, Protected

images were not deleted appears briefly. The first of these

protected pictures is then displayed.

Fig. 73 e

For protected pictures, the delete protection must first be cleared before they can be deleted.

· The delete and protection functions always relate exclusively to

Deleting all pictures Fig. 74 a/b

pictures from the source (memory card/internal memory) you have selected in the review menu.

Delete

Do you really want to

Single

delete all images?

Important:

Multi

Pictures cannot be retrieved once they have been deleted.

YES

All

Fig. 74 a

Fig. 74 b

181

Selecting the review source Fig. 75 a-c

Note: This function is only available if a memory card is inserted.

Review mode

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

DURATION

FAVORITE ONLY

REPEAT

Fig. 75 a

SD CARD
Fig. 75 b
INTERNAL MEMORY

Copying picture data between the internal memory and the inserted memory card
If a card is inserted, the Leica TL2 saves the picture data to the card, and if no card is inserted, the internal memory is used. You can copy the picture data at any time from its original location to the other – provided the destination has sufficient capacity available. The copy direction is determined by the selected review source: If the internal memory is selected, data is copied from there onto the memory card, and vice versa.
Copying all pictures/pictures marked as favorites Fig. 76 a/b The procedure is the same for both functions. The only difference is whether you select FAVORITES ONLY, as in the example, or ALL.

Fig. 75 c
The selected source determines not only which pictures are displayed, but also which pictures the , , and functions apply to.

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

MULTI

ALL

FAVORITES ONLY

DURATION

FAVORITE ONLY

REPEAT

Fig. 76 a

Fig. 76 b

Processing of the data begins after around 3 s. · Because of the time required, a corresponding information
screen appears. When the copy operation is complete, a confirmation message appears.

182

Review mode

Copying multiple pictures Fig. 77 a-e

PLAY ALL

PICTURES ONLY

VIDEOS ONLY

DURATION

FAVORITE ONLY

REPEAT

MULTI

ALL

FAVORITES ONLY

From Fig. 77 c onwards, you can select the desired pictures using

the setting dials, as an alternative to gesture control.

· The SET display is replaced with .

Approx.: 2 s after your last marking, the display returns and you can continue with Fig. 77 e.

Fig. 77 a
COPY MULTI INTERNAL SD CARD SET

Fig. 77 b
COPY MULTI INTERNAL SD CARD SET

Fig. 77 d
COPY MULTI INTERNAL SD CARD SET

Fig. 77 c

Fig. 77 e
Processing of the data begins after around 3 s. · Because of the time required, a corresponding information
screen appears. When the copy operation is complete, a confirmation message appears.

183

Review mode

Video review

If a video recording is selected, PLAY > appears on the monitor. Starting playback Fig. 78

INFO
Fig. 78

Calling up the video and audio control symbols Fig. 79 a/b

16:12
Fig. 79 a

16:12

Fig. 79 b

1 Elapsed time 2 Scroll bar with contact area 3 Break 4 Volume 5 Shorten video 6 Combine two videos 7 Back to beginning of video
Note: The control symbols disappear after 3 s.

184

Continuing playback from a particular point Fig. 80 a/b

Adjusting the volume Fig. 83 a/b

Review mode

16:12
Fig. 80 a
Pausing playback Fig. 81 a/b

18:26
Fig. 80 b

16:12
Fig. 81 a
Stopping playback Fig. 82 a/b

16:12
Fig. 81 b

16:12
Fig. 82 a

Fig. 82 b

16:12
Fig. 83 a

16:12
Fig. 83 b

Note: The sound is muted at the lowest position of the bar and the volume symbol will switch to .

INFO

185

Review mode

Cutting and combining video clips

The Leica TL2 provides two different options for cutting a video

recording.

Cutting starting and/or end sections Fig. 84 a-e

SAVE

16:12
Fig. 84 a
SAVE

16:12
Fig. 84 b
SAVE

2
16:12
1

3 Fig. 84 d

11:30
Fig. 84 c

SAVE AS NEW OVERWRITE REVIEW CLIP
12:36
Fig. 84 e
Operation continued on next page, right-hand column.

Cutting out a particular scene Fig. 85 a-f
SAVE

16:12
Fig. 85 a

SAVE

Fig. 85 b

Fig. 85 d

Fig. 85 c

SAVE

SAVE AS NEW OVERWRITE REVIEW CLIP

12:36
Fig. 85 f

Fig. 85 e

· During the operation, both the time (1) and a still shot of the selected start and end points (2/3) are displayed

Operation continued on next page, right-hand column.
Note: You can cut in 1 s increments, therefore the initial video must have a length of at least 3s.

186

Combining two video recordings Fig. 86 a-d

16:12
Fig. 86 a

Fig. 86 b

Review mode

When cutting and when combining videos, the operation continues

by selecting one of the three options in the submenu Fig. 84 e, 85 f, 86 d

and the process is the same.
SET

Select SAVE AS NEW The new video is also saved and the original is retained.

Select OVERWRITE The new video is saved and the original is deleted.

SAVE AS1 NEW OVERWRITE REVIEW CLIP
Fig. 86 d

SET

Fig. 86 c

Operation continued in right-hand column.
Note: Two videos can be selected for each combination operation. The order is indicated by 1 and 2.

Select REVIEW CLIP The new video is shown. It is not saved and the original is not deleted.
· In all three cases, a corresponding information screen initially appears due to the time required to process the data, followed by the initial scene of the new video.

187

EN MISCELLANEOUS

Applying profiles

Miscellaneous

USER PROFILES On the Leica TL2, any combination of menu settings can be permanently stored, e.g. so that they can be retrieved quickly and easily at any time for recurring situations/subjects. A total of three memory slots are available for these combinations. Of course, you can reset all menu options to the factory default settings (Default Profile).
Creating profiles Set the desired functions in the menu
In the main menu, select
Select In the submenu, select Save as Profile In the Save as Profile submenu, select the desired profile slot

In the main menu, select
Select Select Load Profile in the submenu In the Load Profile submenu, select the desired profile slot, or
Default Profile
Notes: · By selecting Default Profile you can access the factory settings
at any time even if other menu settings have been saved in one or more of the three profile slots. · Unlike the function explained in the section “Resetting all custom settings”, your settings for time, date and language are not reset with Default Profile.

188

Renaming profiles In the main menu, select

Transferring profiles from/to a card

You can either copy the profile slots to the memory card, or, vice-

versa, from a memory card to the camera. Both procedures are

performed in principally the same way.

Miscellaneous

Select Select Rename Profile in the submenu

In the main menu, select

In the Rename Profile submenu, select the desired profile slot
In the corresponding keypad submenu, enter the new name using touch control to select the desired characters

Select
Select Export Profile or Import Profile in the submenu · A confirmation prompt appears
Confirm the ex-/import – YES or reject – NO

Note: When exporting, all profile slots are transferred to the card, i.e. including any empty profiles. As a result, when importing profiles any existing profiles in the camera will be overwritten, i.e. deleted.

189

Miscellaneous

RESETTING ALL CUSTOM SETTINGS

Note:

This function allows you to reset all custom settings previously made in the menu at once and restore the factory default, if so desired with the exception of the WiFi settings and/or those in the profiles:

This reset also applies to the settings in Date/Time and Language. The next time the camera is turned on, the welcome video is played again. For details of what to do next, refer to the “Menu language”, and “Date/Time” sections.

In the main menu, select
Select · A confirmation prompt appears

Confirm the reset – YES or reject – NO · A confirmation screen concerning the WiFi settings appears.
Confirm deleting the WiFi settings – NO or reject – YES · A confirmation screen concerning the profile settings appears.
Confirm deleting the settings – NO or reject – YES

190

RESETTING THE IMAGE FILE NUMBERING

Notes:

Miscellaneous

The Leica TL2 saves picture files with ascending numbers and stores them in automatically created folders. The names of the picture files are therefore made up of eight characters, “L” for the (Leica) camera, three figures for the folder, and four figures for the picture, e.g. ,,L1001234″. You can reset this numbering at any time:

· If a memory card is inserted, the numbering is only reset on the card; if no card is inserted the internal memory numbering.
· If the memory card used already contains a picture file with a higher number than the last number assigned by the camera, the numbers are incremented according to the numbering on the card.

In the main menu, select

· To reset the folder number to 100, format the memory card or the internal memory and then immediately reset the image

Select

number. This also resets the picture number (to 0001).

· A confirmation prompt appears

Confirm – YES or reject – NO

When you reset the numbering, or if the current folder contains the picture file number 9999, a new folder is automatically created and the numbering starts over. Example: Last picture before reset “L1009999”, first picture afterwards “L1010001”. For example, you can use this to sort your picture files more clearly. The next available number is always used as the folder number, and a maximum of 999 folders are possible. If the number capacity is reached at “L9999999”, a corresponding warning message appears in the monitor and the numbering has to be reset.

191

Miscellaneous

EN SETTING UP AND USING THE WIFI FUNCTION
Activating the WiFi function on the camera Fig. 87 a/b
In the main menu, select Select In the WLAN submenu, select ON

DIRECT

Fig. 87 a

Fig. 87 b

There are various ways of communicating with the Leica TL2 via WiFi. DIRECT if no WiFi network is available or Router to incorporate the Leica TL2 in an available WiFi
network. To be able to access the pictures on your Leica TL2, you can choose between the platform-independent connection Web Gallery and APP Connection . With the Web Gallery function, you can very easily access your camera using a web browser. APP Connection enables more comprehensive functions.
Note: The Leica TL app is available in the AppleTM App StoreTM/GoogleTM Play StoreTM.

ROUTER

192

Selecting a network Fig. 88 a/c

Enter access data

Miscellaneous

Select the network you want from the list displayed on the monitor by touching it. If the relevant network does not appear in the list immediately, you can start another search for available networks by toching the SCAN button.

Pressing the IP Settings button takes you to the corresponding submenu. If required, you can enter a fixed IP address and subnet mask for the camera by touching the MANUAL button here. However, these two settings are normally supplied automatically by the WLAN. Enter the corresponding password in the Password field to access the relevant network. If no password is set for the network, you can leave this field blank.

Fig. 88 a

Fig. 88 b

Access with a web browser (Web Gallery) Fig. 90 a-d
In the address line of the web browser enter the (IP) address that is displayed on the monitor. You can then view and download the pictures on the camera.

Fig. 88 c
Touching the ADD button allows you to add “hidden” networks by entering the network name Abb. 89 a/b. Use the keyboard displayed on the monitor to do this.

Fig. 90 a

Fig. 90 b

Fig. 89 a

Fig. 89 b

Fig. 90 d

Fig. 90 c

193

Access with the Leica TL App (APP Connection)

Managing networks Fig. 91 a-c

Miscellaneous

First of all, select the desired connection method in the camera menu. For a direct connection to a smart phone or tablet:
Select DIRECT Then APP Connection The network name – SSID and the Password are displayed on
the camera monitor. Select the desired Leica TL2 from the network list on your
smartphone or tablet. For connection via an available WiFi network:
Select ROUTER Then APP Connection Select the desired WiFi network from the list of available
networks Enter access data (user/password).

The settings for different networks can be deleted using the MANAGE NETWORKS option in the WiFi menu. This is recommended for WLAN networks that you use infrequently or only once. Connected networks are indicated by a symbol ( ).
In the main menu, select
Select Select in the submenu Select MANAGE NETWORKS

Subsequent connections are established automatically. If you want to connect the app to another Leica TL2, select DISCONNECT and continue as described above to establish the new connection.

Fig. 91 a

Fig. 91 b

Fig. 91 c

194

Changing network names on the Leica TL2 Fig. 92 a-d

Notes:

Miscellaneous

You can create a custom network name for your Leica TL2 (factory default setting:Leica TL2Camera Serial Number). To do this, touchthe DEVICE symbol in the WiFi menu on the camera.

· With WiFi access, pictures are only transferred in 2 MP resolution. To access the original data, you should connect the camera with a USB cable or insert the SD card into an SD card reader.
· Always connect the camera only to secure networks in order to

In the main menu, select

prevent unauthorized access to your camera and data. · The WiFi function requires slightly more power. We therefore rec-

Select Select in the submenu

ommend that you deactivate the function when it is no longer required. · If there is an active USB connection between the camera and a

Select Device

computer, the WiFi function is disabled on technical grounds.

Note: The characters “A to Z”, “a to z”, “0 to 9”, and “-” are available for the name. Blanks cannot be used.

· There is no access control for the Web Gallery connection method. Therefore, make sure that you are working in a secure WLAN network.

Fig. 92 a Fig. 92 d

Fig. 92 b Fig. 92 c

195

TRANSFERRING DATA TO A COMPUTER

Important:

· Use only the USB cable supplied.

Miscellaneous

Using a USB cord/Using the camera as an external drive
The Leica TL2 is compatible with the following operating systems: Microsoft®: Vista® 7®/8® Apple® Macintosh®: Mac® OS X (10.6) and later The camera is equipped with a super-speed USB 3.0 interface for transferring data.

· While data is being transferred, the USB cable must not be disconnected as otherwise the computer and/or the camera may crash. and may even cause irreparable damage to the memory card.
· The camera must not be turned off or automatically shut itself down due to a lack of battery power while data is being transferred, as this can cause the computer to crash.

With Windows operating systems:

· For the same reason, the battery must never be removed from the camera while the connection is active. If the battery capacity

The operating system detects the camera as an external drive and

deteriorates while data is being transferred, the INFO screen

assigns it a drive letter. Transfer the picture data to your computer

appears with the battery capacity flashing. In this case cancel

using Windows Explorer and save it.

the data transfer, turn off the camera, and charge the battery.

With Mac operating systems:
The camera appears as a storage medium on the desktop. Transfer the picture data to your computer using Finder and save it.

Using a card reader
Picture data can also be transferred using card readers for SD/ SDHC/SDXC memory cards. Compatible external card readers are available for computers with a USB interface.
Note: Your Leica TL2 is equipped with an integrated sensor to detect the camera directionality horizontal or vertical (both directions) used for each exposure. This information allows the pictures to always be automatically displayed upright when subsequently displayed on a computer running the appropriate programs.

196

FORMATTING

Notes:

Miscellaneous

On the Leica TL2, the picture data in the internal memory and on an inserted memory card can be deleted separately. For memory cards, it is not normally necessary to format cards that have already been inserted. However, if a card that has yet to be formatted is inserted for the first time, it must be formatted. In such cases, the corresponding confirmation prompt appears automatically. Nevertheless, it is recommended that the internal memory and memory cards be reformatted occasionally, as a certain amount of residual data (info accompanying pictures) can take up memory capacity.

· When formating the memory card, the data on it is irretrievably lost.
· You should therefore get into the habit of transferring all your pictures onto a secure bulk storage medium, e.g. the hard drive on your computer, as soon as possible.
· Do not turn off the camera while the operation is in progress. · If the memory card has been formatted in another device, such
as a computer, you should reformat it in the camera. · If the memory card cannot be formatted, you should ask your
dealer or the Leica Product Support for advice. · Files on the card marked with delete protection will notsimilarly

In the main menu, select

be lost in formating.

Select Call up the relevant submenu
· A confirmation prompt appears
Confirm – YES or reject – NO

197

USING RAW DATA (DNG)

INSTALLING FIRMWARE UPDATES

Miscellaneous

You will need the right software if you want to edit data in DNG format, e.g. the professional raw data converter Adobe® Photoshop® Lightroom®. The software allows you to convert stored raw data in excellent quality and also offers quality optimized algorithms for digital color processing which create very low noise results coupled with astonishingly high resolution. During editing, you can adjust parameters like gradation, sharpness etc. to achieve the best possible image quality.

Leica is constantly working on developing and optimizing its products. As digital cameras have many functions that are purely controlled electronically, some of these improvements and enhancements to the functions can be installed on the camera at a later date. For this purpose, Leica offers firmware updates at irregular intervals that are made available to you on our website for download. Once you have registered your camera, Leica will notify you of all new updates. Further information on registration and firmware updates for your camera, as well as any amendments and additions to the details provided in these instructions, can be found in the “Owners’ Login” area at: https://owners.leica-camera.com

To identify which firmware version is installed:

In the main menu, select
Select · The current version number on the camera is displayed in the first line of the submenu.
The second line of the submenu provides access to a display of various country-specific approval symbols and numbers. Select Regulatory information in the submenu.
· The two-page display appears.

198

SAFETY AND CARE INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS

· Ensure that sand and dust cannot get into the camera, e.g. on

the beach. Sand and dust can damage the camera and the

memory card. Take particular care when inserting and removing

Safety and care instructions

Do not use your camera in the immediate vicinity of devices with

the card.

powerful magnetic, electrostatic or electromagnetic fields (e.g.

· Ensure that water cannot get into the camera, e.g. when it is

induction ovens, microwave ovens, television sets or computer

snowing or raining and on the beach.

monitors, video game consoles, cell phones, radio equipment).

Moisture can cause malfunctions and even irreparable damage

· If you place the camera on or very close to a television set, its

to the camera and the memory card.

magnetic field could interfere with picture recordings.

· If salt water spray gets onto the camera, wet a soft cloth with

· The same applies to use in the vicinity of cell phones.

tap water, wring it out thoroughly and wipe the camera with it.

· Strong magnetic fields, e.g. from speakers or large electric

Then wipe down thoroughly with a dry cloth.

motors, can damage the stored data or the pictures. · If the camera malfunctions due to the effects of electromagnetic
fields, remove the battery and then turn the camera on again. Do not use the camera in the immediate vicinity of radio trans-

Important: Use only the accessories specified and described in these instructions or by Leica Camera AG with the camera.

mitters or high-voltage power lines. Their magnetic fields can also interfere with picture recordings. · Protect the camera from contact with insect sprays and other aggressive chemicals. Petroleum spirit, thinner and alcohol may not be used for cleaning. Certain chemicals and liquids can damage the camera’s housing or the surface finish. · As rubber and plastics sometimes emit aggressive chemicals, they should not remain in contact with the camera for a long time.

Monitor
· If the camera is exposed to significant temperature fluctuations, condensation can form on the monitor. Wipe it off carefully with a soft dry cloth.
· If the camera is very cold when turned on, the monitor image will initially be slightly darker than normal. As soon as the monitor warms up, it will reach its normal level of brightness.
The monitor is manufactured using a high-precision process. This ensures that of the total of around 920,000 pixels more than 99.995% work correctly and only 0.005% remain dark or are always

bright. However, this is not a malfunction and it does not impair the

reproduction of the picture.

199

Picture sensor

For lenses

Safety and care instructions

· Cosmic radiation (e.g. during flights) can cause pixel defects.
Condensation If condensation has formed on or in the camera, you should turn it off and leave it to stand at room temperature for around an hour. Once the camera temperature has adjusted to room temperature, the condensation will disappear by itself.
Care instructions · As any soiling also represents a growth medium for microorgan-
isms, you should take care to keep the equipment clean.

· Normally, a soft hair brush is sufficient to remove dust from the outer lens elements. However, in case of more stubborn dirt, they can be carefully cleaned with a very clean, soft cloth that is completely free of foreign matter, using circular motions from the inside to the outside. We recommend micro-fiber cloths (available from photographic and optical specialists) that are stored in a protective container and can be washed at temperatures of up to 40°C/104°F (without fabric softener, never iron!). Cloths for clean

Leica TL2 Digital Photography Instructions

TL2 Digital Photography

Product Information

Specifications

Product Usage Instructions

1. Inserting the Battery

2. Attaching the Lens

3. Inserting a Memory Card

4. Powering On/Off the Camera

5. Capturing Photos

6. Recording Videos

FAQ

Q: Where can I find more information about Leica TL2

Q: How can I check the scope of included accessories for

Q: What are the available spare parts for the Leica TL2?

Q: Is the Leica TL2 compliant with FCC rules?

DURATION

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Leica User Manuals

Related Manuals