LG 55UK6750PLD Smart LED TV Owner’s Manual

: June 16, 2024
: LG

Table of Contents

LG 55UK6750PLD Smart LED TV
Specifications
Product Usage Instructions
Product Setup
Using the TV
FAQs
Separate Purchase
Environment condition
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LG 55UK6750PLD Smart LED TV

Specifications

Model: UK65, UK67, UK69*
Product Code: MFL70422202
Sizes: 43/50/55UK65, 43/50/55/65UK67, 43/50/55/65UK69*
Power Requirement: AC 100-240 V ~ 50 / 60 Hz

Product Usage Instructions

Warning! Safety Instructions
CAUTION: RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Do not install the product on a carpet or cushion.
Do not block or cover the product with cloth or other materials.
Avoid twisting, kinking, pinching, closing in a door, or walking upon the power plug.
The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
Pay particular attention to plugs, wall outlets, and the point where the cord exits the product.
Ensure that the product is not located near heat sources such as radiators or stoves.
Do not expose the product to dripping or splashing liquids and do not place any objects filled with liquids, such as vases, on the product.
Ensure that the antenna system is properly grounded to provide protection against voltage surges and static charges.
Follow the guidelines provided in Section 810 of the National Electrical Code (NEC) in the U.S.A.

Product Setup

Place the TV on a stable surface, avoiding carpets or cushions.
Ensure that there is enough space around the TV for proper ventilation.
Connect the power plug to an AC outlet with the specified power requirement (AC 100-240 V ~ 50 / 60 Hz).
Connect external devices such as cable/satellite boxes, DVD players, or gaming consoles using the appropriate cables and ports.
Turn on the TV by pressing the power button on the remote control or on the TV itself.

Using the TV

Once the TV is set up, you can use it to watch your favorite shows, movies, or play games. Here are some basic instructions:

Use the remote control to navigate through the TV’s menu and settings.
Press the “Menu” button to access the main menu and use the arrow keys to navigate through the options.
Use the “OK” or “Enter” button to select an option.
Adjust the volume using the volume buttons on the remote control.
Change channels using the channel up and down buttons or by entering the channel number directly.
Access additional features such as settings, input selection, or smart TV functions using the corresponding buttons on the remote control.

FAQs

Q: How do I connect external devices to the TV?
A: To connect external devices such as cable/satellite boxes, DVD players, or gaming consoles, use the appropriate cables and ports. Connect the audio and video cables to the corresponding input ports on the TV and the output ports on the device. Make sure to select the correct input source on the TV to display the content from the connected device.

Q: How do I adjust the picture settings?
A: To adjust the picture settings, press the “Menu” button on the remote control to access the main menu. Navigate to the “Picture” or “Settings” section and use the arrow keys to select and adjust the desired settings such as brightness, contrast, color, and sharpness. Press the “OK” or “Enter” button to confirm the changes.

Q: How do I access smart TV functions?
A: To access smart TV functions, press the corresponding button on the remote control. This button is usually labeled as “Smart” or has a dedicated icon. Once in the smart TV interface, use the arrow keys and OK button to navigate through apps, streaming services, and other features. Some smart TVs also support voice control or have a built-in voice assistant for easier navigation.

AA

43/50/55UK65 43/50/55/65UK67 43/50/55/65UK69*

a X4
(M5 X L20) 43/50/55UK65 43/50/55UK67 43/50/55UK69*

b X4
(M5 X L25) 65UK67 65UK69

70UK69 70UK67
c X4
(M5 X L12) 70UK69 70UK67

d X4
(M4 X L20)

5

6

7

d

70UK69, 70UK67
1

2
1

1

2

4
ab
8
3

4

5

6

7

c d

8

9

10

: Depending on model / Abhängig vom Modell / Selon le modèle / In base al modello / En función del modelo / Dependendo do modelo / Afhankelijk van het model / / Odvisno od modela / Típusfügg / Zalenie od modelu / Závisí na modelu / V závislosti od modelu / În funcie de model / / Sõltub mudelist / Priklauso nuo modelio / Atkarb no modea / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit / Ovisno o modelu / / Beroende på modell / Avhengig av modell / Afhængigt af modellen / Mallin mukaan /

AUDIO

VIDEO

VIDEO/Y PB PR L/MONO AUDIO R VIDEO/Y PB PR L/MONO AUDIO R

43UK6950PLB 43UK6710PLB 43UK6510PLB 43UK6750PLD 43UK6550PLD
50UK6950PLB 50UK6710PLB 50UK6510PLB 50UK6750PLD 50UK6550PLD
55UK6950PLB 55UK6710PLB 55UK6510PLB 55UK6750PLD 55UK6550PLD
65UK6950PLB 65UK6710PLB 65UK6750PLD
70UK6950PLA 70UK6710PLA

A

B

975

631

1128

715

1237

775

1456

903

1573

968

Power requirement

C
224.6
259.2 259.2 310.9 350.1

D

E

F

F G

571

86.4

10.3

9.1

658

86.4

12.8

11.6

718

63.8

17.3

16.0

841

64.8

27.5

26.0

910

69.0

35.3

32.5

AC 100-240 V ~ 50 / 60 Hz

OWNER’S MANUAL
Safety and Reference
LED TV LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

MFL70319804
(1803-REV02)

www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.

ENGLISH

Warning! Safety Instructions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of uninsulated”dangerous voltage”within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
· TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
· Do not place the TV and/or remote control in the following environments: – Keep the product away from direct sunlight. – An area with high humidity such as a bathroom – Near any heat source such as stoves and other devices that produce heat. – Near kitchen counters or humidifiers where they can easily be exposed to steam or oil. – An area exposed to rain or wind. – Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit). – Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. – Do not install in excessively dusty places. Otherwise, this may result in fire, electric shock, combustion/ explosion, malfunction or product deformation.

· Ventilation – Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.
– Do not install the product on a carpet or cushion. – Do not block or cover the product with cloth or other materials
while unit is plugged in. · Take care not to touch the ventilation openings. When watching
the TV for a long period, the ventilation openings may become hot. · Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon.
Pay particular attention to plugs, wall outlets, and the point where
the cord exits the device. · Do not move the TV whilst the Power cord is plugged in. · Do not use a damaged or loosely fitting power cord. · Be sure do grasp the plug when unplugging the power cord. Do
not pull on the power cord to unplug the TV. · Do not connect too many devices to the same AC power outlet as
this could result in fire or electric shock. · Disconnecting the Device from the Main Power
– The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.
· Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.
· Outdoor Antenna Grounding (Can differ by country): – If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can come in contact with such power lines or circuits
as death or serious injury can occur.
Be sure the antenna system is grounded to provide some
protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code (NEC) in the U.S.A.
provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electrodes and requirements for the grounding electrode.
Antenna grounding according to the National Electrical Code,

· Grounding (Except for devices which are not grounded.) – TV with a three- prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the
earth ground wire to prevent possible electric shock. · Never touch this apparatus or antenna during a lightning storm.
You may be electrocuted. · Make sure the power cord is connected securely to the TV and wall
socket if not secured damage to the Plug and socket may occur and
in extreme cases a fire may break out. · Do not insert metallic or inflammable objects into the product. If a
foreign object is dropped into the product, unplug the power cord
and contact the customer service. · Do not touch the end of the power cord while it is plugged in. You
may be electrocuted. · If any of the following occur, unplug the product
immediately and contact your local customer service.
– The product has been damaged. – If water or another substance enters the product (like an AC
adapter, power cord, or TV).

– If you smell smoke or other odors coming from the TV – When lightning storms or when unused for long periods of time. Even the TV is turned off by remote control or button, AC power
source is connected to the unit if not unplugged in. · Do not use high voltage electrical equipment near the TV (e.g., a
bug zapper). This may result in product malfunction. · Do not attempt to modify this product in any way without written
authorization from LG Electronics. Accidental fire or electric shock
can occur. Contact your local customer service for service or repair.
Unauthorized modification could void the user’s authority to
operate this product. · Use only an authorized attachments / accessories approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction, or product damage. · Never disassemble the AC adapter or power cord. This may result in
fire or electric shock. · Handle the adapter carefully to avoid dropping or striking it. An
impact could damage the adapter. · To reduce the risk of fire or electrical shock, do not touch the TV
with wet hands. If the power cord prongs are wet or covered with
dust, dry the power plug completely or wipe dust off.

· Batteries – Store the accessories (battery, etc.) in a safe location out of the reach of children.
– Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should
not be exposed to excessive heat. · Moving
– When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people
to carry larger TVs. Do not press or put stress on the front panel
of the TV. Otherwise, this may result in product damage, fire
hazard or injury. · Keep the packing anti-moisture material or vinyl packing out of the
reach of children. · Do not allow an impact shock, any objects to fall into the product,
and do not drop anything onto the screen. · Do not press strongly upon the panel with a hand or a sharp
object such as a nail, pencil, or pen, or make a scratch on it. It may
cause damage to screen. · Cleaning
– When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the
TV. Do not clean your TV with chemicals including glass cleaner,
any type of air freshener, insecticide, lubricants, wax (car,
industrial), abrasive, thinner, benzene, alcohol etc., which can
damage the product and/or its panel. Otherwise, this may result
in electric shock or product damage.

Separate Purchase

· If the TV is turned on for the first time after it was shipped from the

factory, initialization of the TV may take a few minutes.
· Image shown may differ from your TV. · Your TV’s OSD (On Screen Display) may differ slightly from that

shown in this manual. · The available menus and options may differ from the input source

or product model that you are using.
· New features may be added to this TV in the future. · The device must be easily accessed to a location outlet near the

access. Some devices are not made by turning on / off button,

turning off the device and unplugging the power cord. · The items supplied with your product may vary depending on the

model. · Product specifications or contents of this manual may be changed

without prior notice due to upgrade of product functions. · For an optimal connection, HDMI cables and USB devices should

have bezels less than 10 mm thick and 18 mm width. Use an

extension cable that supports

if the USB cable or USB

memory stick does not fit into your TV’s USB port.

Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
Magic Remote Control
(Depending on model)
AN-MR18BA Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.

B

B *A 10 mm

*B 18 mm

A

· Use a certified cable with the HDMI logo attached. · If you do not use a certified HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI Cable Types)
– High-Speed HDMI®/TM cable (3 m or less) – High-Speed HDMI®/TM cable with Ethernet (3 m or less) · How to use the ferrite core (Depending on model)
– Use the ferrite core to reduce the electromagnetic interference in
the power cord. Wind the power cord on the ferrite core once.

[Wall side] [TV side]

10 cm (+ / -2 cm)

4

ENGLISH

Wall Mounting Bracket
(Depending on model) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.
A B

Lifting and moving the TV
Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
· It is recommended to move the TV in the box or packing material that the TV originally came in.
· Before moving or lifting the TV, disconnect the power cord and all cables.
· When holding the TV, the screen should face away from you to avoid damage.

Model

49SK85 49SK81 49SK80 49UK75 43/50UK65 43/50UK69 43/50UK67 43/50UK64 43/50UK63 32/43/49LK61 32/43/49LK62 43LK59 43LK60 43UK62

VESA (A x B) (mm) 200 x 200

Standard screw M6

Number of screws 4

Wall mount bracket

LSW240B MSW240

Model

55/65SK95 55/65SK85 65SK81 65SK80 65UK75 65UK65 65UK69 65UK67 65UK64 65UK63 60UK62*

VESA (A x B) (mm) 300 x 300

Standard screw M6

Number of screws 4

Wall mount bracket OLW480B

55SK81 55SK80 55UK75 55UK65 55UK69 55UK67 49/55UK64 49/55UK63 49LK59 49LK60 49/55UK62
300 x 300 M6 4 OLW480B MSW240
75SK81 70/75/86UK65 70/75/86UK67 75UK62 70UK69
600 x 400 M8 4 LSW640B

· Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.
· When transporting a large TV, there should be at least 2 people. · When transporting the TV by hand, hold the TV as shown in the
following illustration.
· When transporting the TV, do not expose the TV to jolts or excessive vibration.
· When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right.
· Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.
· When handling the TV, be careful not to damage the protruding buttons.

5

ENGLISH

· Avoid touching the screen at all times, as this may result in damage to the screen.
· Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the
TV may occur. · When attaching the stand to the TV set, place the screen
facing down on a cushioned table or flat surface to protect
the screen from scratches.

Securing TV to the Wall

Mounting on the Table

(Depending on model)

1 Lift and tilt the TV into its upright position on a table. · Leave a 10 cm (minimum) space from the wall for proper
ventilation.

10 cm

(Depending on model)

1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. · If there are bolts inserted at the eye-bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface.
· Use a platform or cabinet that is strong and large enough to support the TV securely.
· Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

2 Connect the power cord to a wall outlet. · Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.) · If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury. · Do not use any unapproved items to ensure the safety and product life span. · Any damage or injuries caused by using unapproved items are not covered by the warranty. · Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.

6

ENGLISH

Mounting to the Wall

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. It is advised to connect all the cables before installing fixed wall mounts.

10 cm

· Do not use a sharp object when you detached the cable cover. This could damage the cable or the cabinet. It may also cause personal harm. (Depending on model)
· When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending on model)

(Depending on model)
· Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
· For more information of screws and wall mount bracket, refer to the Separate purchase.
· If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.
· When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
· Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

Stand hole

7

ENGLISH

Connections
Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 ). · Use a signal splitter to use more than 2 TVs. · If the image quality is poor, install a signal amplifier properly to improve the image quality. · If the image quality is poor with an antenna connected, try to realign the antenna in the correct direction. · An antenna cable and converter are not supplied. · For a location that is not supported with ULTRA HD broadcasting, this TV cannot receive ULTRA HD broadcasts directly. (Depending on model)
Satellite dish
Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 ). (Depending on model)
CI module
View the encrypted (pay) services in digital TV mode. (Depending on model)
· Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
· If the TV does not display any video and audio when CI+ CAM is connected, please contact to the Terrestrial/Cable/Satellite Service Operator.

Other connections
Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided.
HDMI
· Supported HDMI Audio format : (Depending on model) DTS (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz), DTS HD (44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz / 176.4 kHz / 192 kHz), True HD (48 kHz), Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
(Only UHD models) · ( ) Picture Additional Settings – On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) – Off : Support 4K @ 50/60 Hz 8 bit (4:2:0) If the device connected to Input Port also supports ULTRA HD Deep Colour, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s setting to off.

USB
Some USB Hubs may not work. If a USB device connected using a USB Hub is not detected, connect it to the USB port on the TV directly.

External Devices
Available external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
· The external device connection may differ from the model. · Connect external devices to the TV regardless of the order of the
TV port. · If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information of recording, refer to the manual provided with the connected device. · Refer to the external equipment’s manual for operating instructions.

8

ENGLISH

· If you connect a gaming device to the TV, use the cable supplied
with the gaming device. · In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the PICTURE
menu until the picture is clear. · In PC mode, some resolution settings may not work properly
depending on the graphics card. · If ULTRA HD content is played on your PC, video or audio may
become disrupted intermittently depending on your PC’s
performance. (Depending on model) · When connecting via a wired LAN, it is recommended to use a CAT
7 cable. (Only when port is provided.) · For LK series, HDR (High Dynamic Range) pictures can be viewed
over the Internet or via USB and HDMI 1.4 compatible devices.

Using Button
You can simply operate the TV functions, using the button.

Remote RS-232C setup

Basic functions

To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the manual. (Depending on model)
· Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.
· When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

Power On (Press) Power Off 1 (Press and Hold) Menu Control (Press 2) Menu Selection (Press and Hold 3)
1 All running apps will close, and any recording in progress will stop. (Depending on country)
2 You can access and adjust the menu by pressing the button when TV is on.
3 You can use the function when you access menu control.

Adjusting the menu
When the TV is turned on, press the button one time. You can adjust the Menu items using the button.

Turns the power off. Changes the input source.

Scrolls through the saved programmes.

Adjusts the volume level.

9

ENGLISH

Using Remote Control

To use the button, press and hold for more than 3 seconds.

(Depending on model)
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
Make sure to point the remote control toward the remote control sensor on the TV.

1

2

1

(Some buttons and services may not be provided depending on models or regions.)

(POWER) Turns the TV on or off.

Selects Radio, TV and DTV programme.

(INPUT) Changes the input source.

(Q. Settings) Accesses the Quick Settings.

By zooming in on the selected area, you can view it in

full screen.

Recalls your preferred subtitle in digital mode.

Number buttons Enters numbers.

Accesses the saved programmes list.

Shows programme guide.

Returns to the previously viewed programme.

You can access apps or Live TV using the number

buttons corresponding to the features.

Adjusts the volume level.

Views the information of the current programme and

screen.

(SEARCH) Search for content such as TV programmes, movies

and other videos, or perform a web search by entering text in the

search bar.

(MUTE) Mutes all sounds.

(MUTE) Accesses the Accessibility menu.

Scrolls through the saved programmes.

Moves to the previous or next screen.

1 , 2 Streaming Service buttons Connects to the Video

Streaming Service.

(HOME) Accesses Home menu.

(HOME) Shows the previous history.

Shows the list of Programmes and Recommended.

Returns to the previous level.

Clears on-screen displays and returns to TV viewing.

Navigation buttons (up/down/left/right) Scrolls through menus

or options.

Selects menus or options and confirms your input.

Teletext buttons (

) These buttons are used for

teletext.

, Audio descriptions function will be enabled. (Depending

on model)

Starts to record and displays record menu. (Only Time

MachineReady supported model) (Depending on model)

Control buttons (

) Controls media contents.

, , , These access special functions in some

menus.

10

ENGLISH

Using Magic Remote Control * To use the button, press and hold for more than 3 seconds.

(Depending on model)
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.
When the message”Magic Remote battery is low. Please change the battery.”is displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching the and ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.

1

2

1

(Some buttons and services may not be provided depending on models or regions.)

(POWER) Turns the TV on or off. You can turn your set-top box on or off by adding the set-
top box to the universal remote control for your TV. Number buttons Enters numbers.
Accesses the saved programmes list.

(Screen Remote) Displays the Screen Remote.

– Accesses the Universal Control Menu. Audio descriptions function will be enabled. You can access apps or Live TV using the number
buttons corresponding to the features.

Adjusts the volume level. (MUTE) Mutes all sounds. (MUTE) Accesses the Accessibility menu.
Scrolls through the saved programmes. (Voice recognition)

Network connection is required to use the voice recognition function.

Once the voice display bar is activated on the TV screen, press and hold the button and speak your command out loud.
(HOME) Accesses the Home menu.

(HOME) Shows the previous history.

Displays the set-top box Home menu.

– When you are not watching via a set-top box: the display changes to the set- top box screen.

Wheel (OK) Press the center of the Wheel button to select a

menu. You can change programmes by using the wheel button.

(up/down/left/right) Press the up, down, left or right

button to scroll the menu. If you press

buttons while the

pointer is in use, the pointer will disappear from the screen and Magic

Remote will operate like a general remote control. To display the

pointer on the screen again, shake Magic Remote to the left and right.

Returns to the previous level.

Clears on-screen displays and returns to last input viewing.

Shows programme guide.

1 , 2 Streaming Service buttons Connects to the Video

Streaming Service.

(INPUT) Changes the input source.

(INPUT) Displays a list of all the external inputs.

(Q. Settings) Accesses the Quick Settings.

(Q. Settings) Displays the All Settings menu.

, , , These access special functions in some menus.

(Red Button) Runs the record function.

Teletext buttons ( , ) These buttons are used for teletext.

By zooming in on the selected area, you can view it in

full screen.

You can zoom in on the area where the remote control is

pointed.

11

ENGLISH

Registering Magic Remote Control
How to register the Magic Remote Control
To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. 2 Point the Magic Remote at your TV and press the Wheel (OK) on
the remote control. If the TV fails to register the Magic Remote, try again after turning
the TV off and back on. How to deregister the Magic Remote Control
Press the and (HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV. Pressing and holding the button will let you cancel and re-
register Magic Remote at once.
· Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
· Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.
· This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
· Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like.

Troubleshooting
Cannot control the TV with the remote control.
· Check the remote control sensor on the product and try again. · Check if there is any obstacle between the product and the remote
control. · Check if the batteries are still working and properly installed (
to , to ). No image display and no sound is produced.
· Check if the product is turned on. · Check if the power cord is connected to a wall outlet. · Check if there is a problem in the wall outlet by connecting other
products. The TV turns off suddenly.
· Check the power control settings. The power supply may be interrupted.
· Check if the auto-off function is activated on the settings related time.
· If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), no signal is detected.
· Turn the TV off/on using the remote control. · Reconnect the HDMI cable. · Restart the PC with the TV on. Abnormal Display
· If the product feels cold to the touch, there may be a small”flicker” when it is turned on. This is normal, there is nothing wrong with product.
· This panel is an advanced product that contains millions of pixels. You may see tiny black dots and/or brightly coloured dots (red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.
· You may find different brightness and color of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.
· Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time.

12

ENGLISH

Generated Sound · “Cracking”noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. · Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product.
· When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel. (Depending on model)
· Make sure to wring any excess water or cleaner from the cloth.
· Do not spray water or cleaner directly onto the TV screen. · Make sure to spray just enough of water or cleaner onto a
dry cloth to wipe the screen.

13

ENGLISH

Specifications

(Depending on country)
Television system
Channel coverage (Band)
Maximum number of storable programmes
External antenna impedance
CI Module (W x H x D) 1 Depending on country

Broadcasting Specifications
Digital TV
DVB-S/S21 DVB-C DVB-T DVB-T21

DVB-S/S2

DVB-C

DVB-T/T2

950 ~ 2,150 MHz

46 ~ 890 MHz

VHF III : 174 ~ 230 MHz UHF IV : 470 ~ 606 MHz UHF V : 606 ~ 862 MHz
S Band II : 230 ~ 300 MHz S Band III : 300 ~ 470 MHz

6,000

3,000

Analogue TV PAL/SECAM B/G, D/K, I
SECAM L
46 ~ 862 MHz

75 100.0 mm x 55.0 mm x 5.0 mm

(Only LK59, LK60, LK61A, 32LK615)

Frequency Range

Wireless module(LGSWFAC71)Specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Output Power (Max.)

2,400 to 2,483.5 MHz 5,150 to 5,725 MHz 5,725 to 5,850 MHz (Not for EU)

13 dBm 16.5 dBm 10 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. “IEEE 802.11ac”is not available in all countries.

14

ENGLISH

(Except for LK59, LK60, LK61A, 32LK615)

Wireless module (LGSBWAC72) specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency Range

Output Power (Max.)

2,400 to 2,483.5 MHz 5,150 to 5,725 MHz 5,725 to 5,850 MHz (Not for EU)

14 dBm 16.5 dBm 11.5 dBm

Frequency Range

Bluetooth

Output Power (Max.)

2,400 to 2,483.5 MHz

8.5 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. “IEEE 802.11ac”is not available in all countries.

Operating Temperature Operating Humidity Storage Temperature Storage Humidity

Environment condition

0 °C to 40 °C Less than 80 % -20 °C to 60 °C Less than 85 %

15

ENGLISH

Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
Licenses
Supported licenses may differ by model.

16

OWNER’S MANUAL
EXTERNAL CONTROL DEVICE SETUP
Please read this manual carefully before operating the set and retain it for future reference.

www.lg.com

ENEGNLGISH

2 KEY CODES

KEY CODES
· This feature is not available for all models.

Code (Hexa)

Function

00 CH +, PR +

01 CH -, PR –

02 Volume +

03 Volume –

06 > (Arrow Key / Right Key)

07 < (Arrow Key / Left Key)

08 Power

09 Mute

0B Input

0E SLEEP

0F TV, TV/RAD

10 – 19 * Number Key 0 – 9

1A Q.View / Flashback

1E FAV (Favorite Channel)

20 Text (Teletext)

21 T. Opt (Teletext Option)

28 Return (BACK)

30 AV (Audio / Video) Mode

Note
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button

39 Caption/Subtitle

R/C Button

40 (Arrow Key / Cursor Up) R/C Button

41

V (Arrow Key / Cursor Down)

R/C Button

42 My Apps

R/C Button

43 Menu / Settings

R/C Button

44 OK / Enter

R/C Button

45 Q.Menu

R/C Button

4C List, – (ATSC Only)

R/C Button

Code (Hexa)

Function

53 List

5B Exit

60 PIP(AD)

61 Blue

63 Yellow

71 Green

72 Red

79 Ratio / Aspect Ratio

91 AD (Audio Description)

7A User Guide

7C Smart / Home

7E SIMPLINK

8E (Forward)

8F (Rewind)

AA Info

AB Program Guide

B0 (Play)

B1 (Stop / File List)

BA

(Freeze / Slow Play / Pause)

BB Soccer

BD (REC)

DC 3D 99 AutoConfig 9F App / * 9B TV/PC

Note
R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button
R/C Button
R/C Button
R/C Button
R/C Button R/C Button R/C Button R/C Button

Key code 4C (0x4C) is available on ATSC/ISDB models which use major/minor channel. (For South Korea, Japan, North America, Latin America except Colombia models)

ENEGNLGISH

EXTERNAL CONTROL DEVICE SETUP 3

EXTERNAL CONTROL DEVICE SETUP
· Image shown may differ from your TV.
Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
Note: The type of control port on the TV can be different between model series.

Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB to Serial converter with USB Cable
USB Type

(PC)

(TV)

USB IN

· LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG.
· It can be purchased from computer stores that carry accessories for IT support professionals.
RS-232C With RS232C Cable
DE9 (D-Sub 9pin) Type · You need to purchase the RS-232C (DE9, D-Sub 9pin female-to-female type) to RS-232C cable required
for the connection between the PC and the TV, which is specified in the manual.

(PC)

RS-232C IN
(CONTROL & SERVICE)

(TV)

The connection interface may differ from your TV.

ENEGNLGISH

4 EXTERNAL CONTROL DEVICE SETUP

Phone jack Type
· You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual.

For other models, connect to the USB port. * The connection interface may differ from your TV.

SERVICE ONLY

1 3

(PC)

(TV)

2

– or

(PC)

1 3
2

RS-232C IN
(CONTROL & SERVICE)

(TV)

Customer Computer

1

5

RS-232C configurations
3-Wire Configurations(Not standard)

RXD

PC 2

TV 2 TXD

TXD 3 GND 5

1 RXD 3 GND

6

9

RS-232C (Serial port)

RXD TXD GND

OR 3 2 5
D-Sub 9

2 1 3 Phone

TXD RXD GND

Set ID For Set ID number, see “Real Data Mapping” on p.6

1. Press SETTINGS to access the main menus. 2. Press the Navigation buttons to scroll to (*General About this TV or OPTION) and press OK. 3. Press the Navigation buttons to scroll to SET ID and press OK. 4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99. 5. When you are finished, press EXIT.

(Depending on model)

ENEGNLGISH

EXTERNAL CONTROL DEVICE SETUP 5

Communication Parameters

· Baud rate : 9600 bps (UART) · Data length : 8 bits · Parity : None
Command reference list
(Depending on model)

· Stop bit : 1 bit · Communication code : ASCII code · Use a crossed (reverse) cable.

COMMAND1

COMMAND2

DATA (Hexadecimal)

COMMAND1

COMMAND2

DATA (Hexadecimal)

01. Power* k

02. Aspect Ratio

k

03. Screen Mute

k

04. Volume Mute

k

05. Volume Control

k

06. Contrast k

07. Brightness

k

08. Color/ Colour

k

09. Tint

k

10. Sharpness

k

11. OSD Select

k

12. Remote Control Lock k Mode

13. Treble k

a

00 to 01

15. Balance k

t

16. Color

c

(p.7)

(Colour)

x

u

Temperature

17. ISM

d

(p.7)

Method (Only j

p

Plasma TV)

e

00 to 01

18. Equalizer j

v

f

00 to 64

19. Energy Saving

j

q

g

00 to 64

20. Tune Command

m

a

21. Channel m

b

h

00 to 64

(Programme)

Add/Del(Skip)

i

00 to 64

22. Key

m

c

23. Control m

g

j

00 to 64

Backlight, Control Panel

Light

k

00 to 32

24. Input

x

select (Main)

b

l

00 to 01

25. 3D (Only x 3D models)

t

26. Extended x

v

m

00 to 01

3D (Only 3D

models)

27. Auto

j

u

r

00 to 64

Configure

00 to 64 00 to 64
(p.8) (p.8) 00 to 05 (p.9) 00 to 01
Key Codes 00 to 64
(p.11) (p.11) (p.11)
(p.12)

14. Bass

k

s

00 to 64

Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed and treated as NG. With RS232C cable, TV can communicate “ka command” in power-on or power-off status. but with USB-to-Serial converter cable, the command works only if TV is on.

ENEGNLGISH

6 EXTERNAL CONTROL DEVICE SETUP

Transmission / Receiving Protocol

Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x)

[Command 2] : Second command to control the TV. [Set ID]

: You can adjust the [Set ID] to choose desired monitor ID number in option menu.

Adjustment range in TV is 1 to 99. If [Set ID] value is selected to `0′, every connected set

can be controlled.

[Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on

transmission/receiving protocol.

[DATA]

: To transmit command data (hexadecimal). Transmit `FF’ data to read status of command.

[Cr]

: Carriage Return – ASCII code `0x0D’

[ ]

: Space ASCII code `0x20′

OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.
Data 00: Illegal Code

Real data mapping (Hexadecimal b Decimal)

When you enter the [data] in hexadecimal, refer to following conversion table. * Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.

00 : Step 0 01 : Step 1 (Set ID 1) … 0A : Step 10 (Set ID 10) … 0F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) …

32 : Step 50 (Set ID 50) 33 : Step 51 (Set ID 51) … 63 : Step 99 (Set ID 99) … C7 : Step 199 C8 : Step 200 …

FE : Step 254 FF : Step 255 … 01 00 : Step 256 … 27 0E : Step 9998 27 0F : Step 9999 …

ENEGNLGISH

EXTERNAL CONTROL DEVICE SETUP 7

Commands may work differently depending on model and signal.

01. Power (Command: k a) To control Power *On or Off of the set.
Transmission[k][a][ ][Set ID][ ][Data][Cr]

Data 00 : Power Off

01 : *Power On

Ack [a][ ][Set ID][ ][OK/NG][Data][x] To Show TV is Power On or *Off
Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x]

Similarly, if other functions transmit `FF’ data based on this format, Acknowledgement feedback presents status about each function.

Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.
04. Volume Mute (Command: k e) To control volume mute on/off.
You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK/NG][Data][x]

02. Aspect Ratio (Command: k c) (Main Picture Size)
To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01 : Normal screen 07 : 14:9

(4:3)

(Europe, Colombia, Mid-East,

02 : Wide screen Asia except South Korea and

(16:9)

Japan)

04 : Zoom

09 : * Just Scan

05 : Zoom 2

0B : Full Wide

(Latin America

(Europe, Colombia, Mid-

except Colombia East, Asia except South

Only)

Korea and Japan)

06 : Set by Program/ 10 to 1F : Cinema Zoom 1

Original

to 16

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.
In DTV/HDMI/Component mode (high-definition), Just Scan is available.
Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.

03. Screen Mute (Command: k d) To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off
01 : Screen mute on (Picture off) 10 : Video mute on

05. Volume Control (Command: k f) To adjust volume.
You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [f][ ][Set ID][ ][OK/NG][Data][x] 06. Contrast (Command: k g) To adjust screen contrast.
You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] 07. Brightness (Command: k h) To adjust screen brightness.
You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [h][ ][Set ID][ ][OK/NG][Data][x] 08. Color/Colour (Command: k i) To adjust the screen Color(Colour).
You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]

ENEGNLGISH

8 EXTERNAL CONTROL DEVICE SETUP

Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) To adjust the screen tint.
You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64 Ack [j][ ][Set ID][ ][OK/NG][Data][x]

10. Sharpness (Command: k k) To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 32
Ack [k][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l) To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00 : OSD off

01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m) To lock the front panel controls on the monitor and
remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00 : Lock off

01 : Lock on

Ack [m][ ][Set ID][ ][OK/NG][Data][x]

If you are not using the remote control, use this mode. When main power is off & on (plug-off and plug-in, after 20 – 30 seconds), external control lock is released.
In the standby mode (DC off by off timer or ka’,mc’ command), and if key lock is on, TV will not turn on by power on key of IR & Local Key.

13. Treble (Command: k r)
To adjust treble. You can also adjust in the AUDIO menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [r][ ][Set ID][ ][OK/NG][Data][x]

(Depending on model)
14. Bass (Command: k s) To adjust Bass.
You can also adjust in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [s][ ][Set ID][ ][OK/NG][Data][x] * (Depending on model)
15. Balance (Command: k t) To adjust balance.
You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [t][ ][Set ID][ ][OK/NG][Data][x]

16. Color(Colour) Temperature (Command: x u) To adjust colour temperature. You can also adjust
Color(Colour) Temperature in the PICTURE menu. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [u][ ][Set ID][ ][OK/NG][Data][x]

17. ISM Method (Command: j p) (Only Plasma TV) To control the ISM method. You can also adjust
ISM Method in OPTION menu.
Transmission [j][p][ ][Set ID][ ][Data][Cr] Data Min : 02: Orbiter 08: Normal 20: Color(Colour) Wash
Ack [p][ ][Set ID][ ][OK/NG][Data][x]

18. Equalizer (Command : j v)

Adjust EQ of the set.

Transmission [j][v][ ][Set ID][ ][Data][Cr]

MSB

LSB

0000000 0

Frequency

Data

7 6 5 Frequency 4 3 2 1 0

Step

0 0 0 1st Band 0 0 0 0 0 0(decimal)

0 0 1 2nd Band 0 0 0 0 1 1(decimal)

0 1 0 3rd Band … … … … …

…

0 1 1 4th Band 1 0 0 1 1 19(decimal)

ENEGNLGISH

EXTERNAL CONTROL DEVICE SETUP 9

1 0 0 5th Band 1 0 1 0 0 20(decimal) Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] * It depends on model, and can adjust when sound mode is EQ adjustable value.
19. Energy Saving (Command: j q) To reduce the power consumption of the TV. You
can also adjust Energy Saving in PICTURE menu. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Off 01 : Minimum 02 : Medium 03 : Maximum 04 : Auto (For LCD TV / LED TV) / Intelligent sensor (For PDP TV) 05 : Screen off

(Depending on model) Ack [q][ ][Set ID][ ][OK/NG][Data][x] 20. Tune Command (Command: m a)
This command may work differently depending on model and signal.
· For Europe, Mid-East, Colombia, Asia except South Korea and Japan Model
Select channel to following physical number. Transmission [m][a][ ][Set ID][ ][Data 00][ ] [Data 01][ ][Data 02][Cr] * Analog Antenna/Cable
[Data 00][Data 01] Channel Data Data 00 : High byte channel data Data 01 : Low byte channel data
– 00 00 ~ 00 C7 (Decimal : 0 ~ 199)
Data 02 : Input Source (Analog) – 00 : Antenna TV (ATV) – 80 : Cable TV (CATV)
Digital Antenna/Cable/Satellite
[Data 00][Data 01]: Channel Data Data 00 : High Channel data Data 01 : Low Channel data
– 00 00 ~ 27 0F (Decimal: 0 ~ 9999)
Data 02 : Input Source (Digital) – 10 : Antenna TV (DTV) – 20 : Antenna Radio (Radio) – 40 : Satellite TV (SDTV) – 50 : Satellite Radio (S-Radio) – 90 : Cable TV (CADTV) – a0 : Cable Radio (CA-Radio)
Tune Command Examples: 1. Tune to the Analog antenna (PAL) Channel 10.

Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00
2. Tune to the digital antenna (DVB-T) Channel 01. Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Antenna TV = 10 Result = ma 00 00 01 10
3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x] · For South Korea, North/Latin America except Colombia Model
To tune channel to following physical/major/minor number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel from the Major / Minor number, the Physical number is not required when sending a command in Digital. Analog Antenna/Cable
Data 00 : Physical Channel Number – Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) – Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125)
[Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don’t care) Data 03 & 04: xx (Don’t care) Data 05: Input Source (Analog)
– 00 : Antenna TV (ATV) – 01 : Cable TV (CATV) Digital Antenna/Cable
Data 00 : xx (Don’t care)
[Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data
– 00 01 ~ 27 0F (Decimal: 1 ~ 9999) [Data 03][Data 04]: Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data
Data 05 : Input Source (Digital) – 02 : Antenna TV (DTV) Use Physical Channel Number – 06 : Cable TV (CADTV) Use Physical Channel

ENEGNLGISH

10 EXTERNAL CONTROL DEVICE SETUP

Number – 22 : Antenna TV (DTV) Don’t Use Physical
Channel Number – 26 : Cable TV (CADTV) – Don’t Use Physical
Channel Number – 46 : Cable TV (CADTV) Use Major Channel
Number Only (One Part Channel) Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0).

Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35.
Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analog Cable TV = 01 Total = ma 00 23 00 00 00 00 01
2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = Digital Antenna TV = 22 Total = ma 00 00 00 1E 00 03 22
Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] · For Japan Model To tune channel to following physical/major/minor
number.
Transmission [m][a][ ][0][ ][Data00][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr] * Digital Antenna/Satellite Data 00: xx (Don’t care)
[Data 01][Data 02]: Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data
– 00 01 ~ 27 0F (Decimal: 1 ~ 9999)
[Data 03][Data 04]: Minor/Branch Channel Number (Don’t care in Satellite)
Data 03: High byte Channel Data Data 04: Low byte Channel Data
Data 05 : Input Source (Digital/Satellite for Japan) – 02 : Antenna TV (DTV) – 07 : BS (Broadcasting Satellite) – 08 : CS1 (Communication Satellite 1) – 09 : CS2 (Communication Satellite 2)
Tune Command Examples: 1 Tune to the digital antenna (ISDB-T) channel 17-1.
Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01

Data 05 = Digital Antenna TV = 02 Total = ma 00 00 00 11 00 01 02
2. Tune to the BS (ISDB-BS) channel 30. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Don’t Care = 00 00 Data 05 = Digital BS TV = 07 Total = ma 00 00 00 1E 00 00 07

This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b)
To skip current channel(programme) for next time. Transmission [m][b][ ][Set ID][ ][Data][Cr] Data 00 : Del(ATSC,ISDB)/Skip(DVB) 01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x] * Set the saved channel status to del(ATSC, ISDB)/ skip(DVB) or add.
22. Key (Command: m c) To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Key code – p.2.
Ack [c][ ][Set ID][ ][OK/NG][Data][x] 23. Control Backlight (Command: m g) · For LCD TV / LED TV To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x] Control Panel Light (Command: m g)
· For Plasma TV To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]

ENEGNLGISH

EXTERNAL CONTROL DEVICE SETUP 11

24. Input select (Command: x b) (Main Picture Input)
To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]

Data

00 : DTV

01 : CADTV

02 : Satellite DTV

10 : ATV

ISDB-BS (Japan)

03 : ISDB-CS1 (Japan)

04 : ISDB-CS2 (Japan)

11 : CATV

20 : AV or AV1

21 : AV2

40 : Component1 60 : RGB

41 : Component2

90 : HDMI1 92 : HDMI3

91 : HDMI2 93 : HDMI4

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

This function depends on model and signal.

25. 3D(Command: x t) (only 3D models) (Depending on model)
To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data 00][ ][Data 01] [ ][Data 02][ ][Data 03][Cr] (Depending on model) Data Structure [Data 00] 00 : 3D On
01 : 3D Off 02 : 3D to 2D 03 : 2D to 3D [Data 01] 00 : Top and Bottom 01 : Side by Side 02 : Check Board 03 : Frame Sequential 04 : Column interleaving 05 : Row interleaving [Data 02] 00 : Right to Left 01 : Left to Right [Data 03] 3D Effect(3D Depth): Min : 00 – Max : 14 (transmit by Hexadecimal code)

[Data 02], [Data 03] functions depend on model and signal.
If [Data 00] is 00 (3D On), [Data 03] has no meaning.
If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning.
If [Data 00] is 03 (2D to 3D), [Data 01] and [Data 02] have no meaning.
If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal.
[Data 00] [Data 01] [Data 02] [Data 03]

00

O

01

X

02

X

03

X

O

X : don’t care

Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] [Data03][x] [t][ ][Set ID][ ][NG][Data00][x]

26. Extended 3D(Command: x v) (only 3D models) (Depending on model)
To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data 00][ ] [Data 01][Cr] [Data 00] 3D option 00 : 3D Picture Correction 01 : 3D Depth (3D Mode is Manual Only) 02 : 3D Viewpoint 06 : 3D Color Correction 07 : 3D Sound Zooming 08 : Normal Image View 09 : 3D Mode (Genre)

[Data 01] It has own range for each 3D option determined by [Data 00].

When [Data 00] is 00 00 : Right to Left 01 : Left to Right
When [Data 00] is 01, 02 Data Min: 0 – Max: 14 (transmit by Hexadecimal
code) Data value range(0 – 20) converts Viewpoint range (-10 – +10) automatically (Depending on model) This option works when 3D Mode (Genre) is manual
only.
When [Data 00] is 06, 07 00 : Off 01 : On
When [Data 00] is 08 00 : Revert to 3D video from 3D-to-2D converted 2D video 01 : Change 3D video to 2D video, except 2D-to-3D video

If conversion condition doesn’t meet, command is treated as NG.

When [Data 00] is 09
00 : Standard 02 : Cinema 04 : Manual

01 : Sport 03 : Extreme 05 : Auto

Ack [v][ ][Set ID][ ][OK][Data00][Data01][x] [v][ ][Set ID][ ][NG][Data00][x]

ENEGNLGISH

12 EXTERNAL CONTROL DEVICE SETUP
27. Auto Configure (Command: j u) (Depending on model)
To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]