LG 43UW660H LED TV User Guide

LG 43UW660H LED TV

important information

Please read this manual carefully before operating your set and retain it for future reference.

 Safety & Reference

 Image shown may differ from your TV.

MODELS| 43UW660H (43UW660H-UD)| 49UW660H (49UW660H-UD)| 55UW660H (55UW660H-UD)
---|---|---|---
Dimensions (W x H x D)| With stand| 973 x 622 x 303 (mm)

38.3 x 24.4 x 11.9 (inches)

| 1,106 x 694 x 303 (mm)

43.5 x 27.3 x 11.9 (inches)

| 1,240 x 769 x 303 (mm)

48.8 x 30.2 x 11.9 (inches)

Without stand| 973 x 572 x 77.2 (mm)

38.3 x 22.5 x 3.0 (inches)

| 1,106 x 646 x 77.2 (mm)

43.5 x 25.4 x 3.0 (inches)

| 1,240 x 721 x 60.9 (mm)

48.8 x 28.3 x 2.3 (inches)

Weight| With stand| 12.8 kg (28.2 lbs)| 15.3 kg (33.7 lbs)| 19.8 kg (43.6 lbs)
Without stand| 9.5 kg (20.9 lbs)| 12.0 kg (26.4 lbs)| 16.5 kg (36.3 lbs)
Power requirement| AC 100 – 240 V ~ 50 / 60 Hz
Current Value / Power consumption| 1.0 A / 100 W| 1.2 A / 120 W| 1.4 A / 140 W

(For USA and Canada only)
(Para Estates Undo’s y Canada)

 This product qualifies for ENERGY STAR® in the factory default (Home configuration) setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quail for ENERGY STAR®. Refer to ENERGYSTAR.gov  for more information on the ENERGY STAR® program.

Please read this manual carefully before operating your TV and retain it for future reference.

Important Safety Instructions

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

| WARNING/CAUTION|
---|---|---
RISK OF ELECTRIC SHOCK DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the device.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE

WARNING

If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or the product may be damaged

NOTE

The note helps you understand and use the product safely. Please read the note carefully before using the product.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel.
  Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• Do not apply pressure on the panel during handling or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

• Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

• Keep the packing anti-moisture material or vinyl packing out of the reach of children.
  Anti-moisture material is harmful if swallowed.
  If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

• CAUTION concerning the Power Cord (Can differ by country):
  Check the specification page of this owner’s manual to be certain concerning current requirements. Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.
  Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

• Warning – To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

• Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

• Grounding
  (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three- prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

• As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

• Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

• Outdoor Antenna Grounding
  (Can differ by country):
  If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges.
  Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
  Antenna grounding according to the National Electrical Code, ANSI/NFPA 70
  

• Cleaning
  When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

• Moving
  Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

• Ventilation
  Install your TV where there is proper ventilation.
  Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

• If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

• If water or another substance enters the product (like an AC adapter, power cord, or TV), disconnect the power cord and contact the service center immediately. Otherwise, this may result in fire or electric shock.

• Use only an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product deformation.

• Never disassemble the AC adapter or power cord. This may result in fire or electric shock.

• Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.

• Keep the product away from direct sunlight.

• Never touch this apparatus or antenna during a lightning storm.

• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

• DISCONNECTING THE DEVICE FROM THE MAIN POWER
  The power plug is the disconnecting device.
  In case of an emergency, the power plug must remain readily accessible.

• Batteries
  Store the accessories (battery, etc.) in a safe location out of the reach of children.

• This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or allow the batteries to overheat.

• Do not use high voltage electrical equipment near the TV, (e.g., a bug zapper.)
  This may result in product malfunction.

• Dot Defect
  This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

• Generated Sound
  Cracking noise A cracking noise that occurs
  when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
  Electrical circuit humming/panel buzzing A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

• Take care not to touch the ventilation openings.
  When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
  However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

• Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for a extended length of time.

Viewing 3D Imaging

(For 3D models)

CAUTION

• Guardians should not leave children unsupervised who are watching a 3D video.
  Guardians should make children stop watching the video and take a break if they experience eye fatigue, headache, or dizziness.

• When viewing a 3D video, some may experience discomfort such as a headache, dizziness, fatigue, or blurred vision. In this case, stop watching the 3D video and take a break.

• If you watch a 3D video for a long time, you may experience eye fatigue. In this case, stop watching the 3D video and take a break.

• Only use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.

• Do not use 3D glasses instead of your normal glasses, sunglasses, or protective goggles. Place the 3D glasses over your normal eye ware.

• Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.

• Do not use the 3D glasses while walking or moving around. It may cause an accident or injury.

• Be careful not to poke your eye with the frames of the 3D glasses.

• Do not watch 3D content if you have photosensitive seizures, epilepsy, or heart disease.

Preparing

NOTE

• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.

• Image shown may differ from your TV.

• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

• The available menus and options may differ from the input source or product model that you are using.

• New features may be added to this TV in the future.

• The items supplied with your product may vary depending upon the model.

• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
  (0.39 inches) thick and 18 mm (0.7 inches) width.

• Use an extension cable that supports USB 2.0 if the USB cable or USB flash drive does not fit into your TV’s USB port.

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

• Recommended HDMI cable types (3m or less)

• High-Speed HDMI®/™ cable

• High-Speed HDMI®/™ cable with Ethernet
  

• A 10 mm (0.39 inches)

• B 18 mm (0.7 inches)

CAUTION

• Do not use any unapproved items to ensure the safety and lifespan of the product.

• Any damages or injuries by using unapproved items are not covered by the warranty.

• Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.

• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

• Make sure that the screws are fastened tightly.
  (If they are not fastened securely enough, the TV may tilt forward after being installed.)

• Do not fasten the screws with excessive force otherwise they may be worn out and become loose.

• When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the guide panel. (For UW970H series)
  

Warning when using USB storage devices

• USB storage devices with a built-in auto recognition program or its own driver may not work.

• Some USB storage devices may not work or may work improperly.

• Use only those USB storage devices formatted with FAT32 or NTFS File System provided by Windows.

• For external USB HDD, use devices with less than 5V-rated voltages and 500 mA-rated current.

• It is recommended to use USB flash drive with 32 GB or less and USB HDD with 2 TB or less.

• If a USB HDD with power-saving function does not work properly, turn the power off and on.
  For more information, refer to the user manual of USB HDD.

• Data in the USB storage device can be damaged so back up important files in other devices. Data maintenance is the user’s responsibility. The manufacturer is not responsible for data loss.

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies.
(Depending upon model)

AN-VC550

Smart Camera

| AN-MR650

Magic Remote

| **AG-F*****

Cinema 3D Glasses

---|---|---

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

• It is recommended to move the TV in the box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly.
  Make sure not to hold the transparent part, speaker, or speaker grille area.
  

• Use at least two people to move a large TV.

• When transporting the TV by hand, hold the TV as shown in the following illustration.

• When transporting the TV, do not expose the TV to jolts or excessive vibration.

• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

• When handling the TV, be careful not to damage the protruding buttons.

CAUTION

• Avoid touching the screen at all times, as this may result in damage to the screen.
• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.
• Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. (Depending upon model)

Using the Button

(Depending upon model)
You can simply operate the TV functions, pressing or moving the button.

Basic Functions

****| Power On (Press)

Power Off (Press and Hold) 1

---|---
| Volume Control
****| Channels Control

Adjusting the Menu

When the TV is turned on, press button one time. You can adjust the Menu items pressing or moving the buttons.

| Turns the power off.
---|---
| Accesses the setting menu.
| Clears on-screen displays and returns to TV

viewing

| Changes the input source.

Mounting on a Table

1. Lift and tilt the TV into its upright position on a table.

   • Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation.

2. Connect the power cord to a wall outlet.

CAUTION

• Do not place the TV near or on sources of heat, as this may result in fire or other damage.

Adjusting the Angle of the TV to Suit View

(Depending upon model)
Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view.

CAUTION

• When adjusting the angle of the TV, watch out for your fingers.
• Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.

Attaching the TV to a desk (optional)

(Depending upon model)
The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
[TYPE 1]

NOTE

• Screw: M5 x L (*L: Table depth + 8~10 mm) ex) Table depth: 15 mm, Screw: M5 x L25

[TYPE 2]

2-Screws, 2-Washers, 2-Nuts (provided as parts of the product.)

Using the Kensington security system

(Depending upon model)

The Kensington security system connector is located at the rear or stand of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com Connect the Kensington security system cable between the TV and a table.

Securing the TV to a Wall (optional)

1. Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.
   • – If there are bolts inserted at the eye-bolts position, remove the bolts first.
2. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.
3. Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

CAUTION

• Make sure that children do not climb on or hang on the TV.

NOTE

• Use a platform or cabinet that is strong and large enough to support the TV securely.
• Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

Mounting on a Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables.
When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

Make sure to use screws and wall mounts that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model| 43UW660H| 49/55UW660H

49/55UW970H

---|---|---
VESA (A x B)| 200 x 200| 300 x 300
Standard screw| M6| M6
Number of screws| 4| 4
Wall mount bracket (optional)| LSW240B

MSW240

| LSW350B

MSW240

Wall mount

bracket (optional)

| LSW350B

CAUTION

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

NOTE

• When using the wall mount, it is recommended that you apply a piece of tape over the stand holes to prevent dust and bugs from entering the holes. (Depending upon model)
  

Connections (Notifications)

You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

NOTE

• This model supports 4K (ULTRA HD) videos in HDMI and USB input.

• ULTRA HD videos are not supported in the tuner input.

• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR.
  For more information about recording, refer to the manual provided with the connected device.

• The external device connections shown may differ slightly from illustrations in a manual.

• Connect external devices to the TV regardless about the order of the TV port.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• Refer to the external equipment’s manual for operating instructions.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

CAUTION

• Make sure not to bend the copper wire of the RF cable.
  

• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

NOTE

• Use a signal splitter to use 2 TVs or more.
• DTV Audio Supported Codec: MPEG, Dolby Digital.
• Direct ULTRA HD broadcast is unavailable in areas without an ULTRA HD signal.
• This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. (Depending upon model)

Other Connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

NOTE

• Use only with the 3 pole 3.5 mm stereo jack.
• Do not connect your headphones or earphones to the port for connecting an external speaker.

Remote Control

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

A

 Power) Turns the TV on or off.
SMART Accesses the Smart menu.
TV  Selects the remote’s operating mode: TV.
DVD Selects the remote’s operating mode: DVD.
 INPUT Changes the input source.
TIMER Turns the TV off in a set amount of time.
Number button Enters numbers. Also supports
characters.
(Dash) Inserts a dash between numbers such as
2-1 and 2-2.
FLASHBK Tunes to the last channel or input
viewed.
+vole- Adjusts the volume level.
NUM  Switches between Letter and Number
input modes.
cc  Selects a closed caption.
**VD/*  Enables VD function. SAP (Secondary Audio
Program) feature can also be enabled by pressing
the key.
DELETE**  Deletes letters or numbers.
Mutes all sounds.
 Scrolls through the saved channels.
 Moves to the previous or next screen.

B

PORTAL  Displays and removes the interactive menu.

INFOC  Views the information of the current program.

GUIDE  Displays and removes the electronic program guide of Pro: Centric Application.

Navigation button (up / down / left / right) Scrolls through menus or options.

OKENTER Selects menus or options and confirms your input.

 Returns to the previous screen.

MENU SETTINGS  Accesses the quick settings.

EXIT  Clears all on-screen displays and returns to TV viewing.

Color buttons ( Red, Green, Yellow, Blue) These access special functions in some menus.

 Control buttons for media contents

 Feature can only be enabled or disabled by installer menu settings. Configuration of this feature is not supported on TV remote control.

PIP/ PIPCH+i PIPCH-f SWAP/ PIP INPVrf* Not functional.

**** Used for viewing 3D video. (For 3D models)

To select Picture Mode

MENU SETTINGS Picture Picture Mode

Select the picture mode optimized for the viewing environment or the program.

• Vivid Heightens contrast, brightness, and sharpness to display vivid images.

• Standard Displays images in standard levels of contrast, brightness and sharpness.

• APS APS (Auto power saving) mode reduces power consumption by dimming control.

• Cinema / Sport / Game / Photo Displays the optimum picture for movie, sport, game, or photo.

• Expert Menu for adjusting picture quality that allows experts and amateurs to enjoy the best TV viewing. This menu for adjustment is provided for ISF-certified picture tuning professionals.
  (ISF logo can be used only on ISF-certified TVs.) Sick: Imaging Science Foundation Certified Calibration Control (Depending upon model)

• Depending upon the input signal, the available range of picture modes may differ.

• Expert mode is for picture tuning professionals to control and fine-tune using a specific image. For normal images, the effects may not be drastic.

To use HDMI ULTRA HD Deep Color

• MENU SETTINGS General HDMI ULTRA HD Deep Color:
• On: Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0)
• Off: Support 4K @ 60 Hz 8bit (4:2:0)
• If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV’s HDMI ULTRA HD Deep Color setting to Off.
• This feature is available only on certain models which support HDMI ULTRA HD Deep Color.

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

Television System
ATSC, NTSC-M, 64 & 256 QAM
Program Coverage
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135,
CADTV 1-135
External Antenna Impedance
75 Ω

Environment condition

• Operating Temperature
  0 °C to 40 °C (32 °F to 104 °F)

• Operating Humidity
  Less than 80 %

• Storage Temperature
  -20 °C to 60 °C (-4 °F to 140 °F)

• Storage Humidity
  Less than 85 %

Wireless Module Specifications

Wireless Module (LGSBWAC61) Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency range| Output power (Max.)
2400 to 2483.5 MHz

5150 to 5725 MHz

5725 to 5850 MHz

| 15  dBm

16  dBm

12.5 dBm

Bluetooth
Frequency range| Output power (Max.)
2400 to 2483.5 MHz| 10 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the device and the body.

FCC ID: BEJLGSBWAC61 /IC: 2703H-LGSBWAC61

HDMI (PC) supported mode

HDMI (DTV) supported mode

Supported Video Formats

• as, .Wv
  [Video] VC-1 Advanced Profile (except for WMVA),
  VC-1 Simple and Main Profiles
  [Audio] WMA Standard (except for WMA v1 /
  WMA Speech)

• avia
  [Video] Xin (except for 3 wrap-point GMC),
  H.264/AVC, Motion Jpeg, MPEG-4
  [Audio] MPEG-1 Layer I, II, MPEG-1 Layer III(MP3),
  Dolby Digital, LPCM, ADPCM, *DTS

• mp4, .m4v, .mov
  [Video] H.264/AVC, MPEG-4, HEVC
  [Audio] Dolby Digital, Dolby Digital Plus, AAC,
  MPEG-1 Layer III (MP3)

• 3gp, .3g2
  [Video] H.264/AVC, MPEG-4
  [Audio] AAC, AMR(NB/WB)

• move
  [Video] MPEG-2, MPEG-4, H.264/AVC, VP8, VP9,
  HEVC
  [Audio] Dolby Digital, Dolby Digital Plus, AAC,
  PCM, MPEG-1 Layer I, II, MPEG-1 Layer III (MP3),
  *DTS

• mpg, .mpeg, .dat
  [Video] MPEG-1, MPEG-2
  [Audio] MPEG-1 Layer I, II, MPEG-1 Layer III(MP3)

• ts, .trp, .tp, .mts
  [Video] H.264/AVC, MPEG-2, HEVC
  [Audio] MPEG-1 Layer I, II, MPEG-1 Layer III(MP3),
  Dolby Digital, Dolby Digital Plus, AAC, PCM

• gob
  [Video] MPEG-1, MPEG-2
  [Audio] Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM

• DTS: Depending upon model

Supported Audio Formats

• File type: mp3
  [Bit rate] 32 Kbps ~ 320 Kbps
  [Sample freq.] 16 kHz ~ 48 kHz

• File type: wav
  [Sample freq.] 8 kHz ~ 48 kHz

• File Type: egg
  [Bit rate] 64 kbps ~ 320 kbps
  [Sample freq.] 8 kHz ~ 48 kHz

• File Type: mwah
  [Bit rate] 128 Kbps ~ 320 Kbps
  [Sample freq.] 8 kHz ~ 48 kHz

Supported Photo Formats

• Category: 2D (jpeg, jpg, jape)
  [Photo size] Minimum: 64 x 64 (FHD), 128 x 128 (ULTRA HD)
  Maximum: Normal Type: 15,360 (W) x 8,640 (H),
  Progressive Type: 1,920 (W) x 1,440 (H)

• Category: PNG
  [Photo size] Minimum: 64 x 64,
  Maximum: 5,760 (W) x 5,760 (H)

• Category: BMP
  [Photo size] Minimum: 64 x 64,
  Maximum: 1,920 (W) x 1,080 (H)

• BMP and PNG format files may be slower to display than JPEG.

• Non-standard photo/image file may not be displayed.

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.

Troubleshooting

The software may be updated for improvement in performance. The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software. If needed, please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics.

• Cannot control the TV with the remote control.

• Check if anything such as tape has been placed over the receiver.

• Check if there is any obstacle between the
  product and the remote control.

• Replace the batteries with new fresh ones.

• No image display and no sound is produced.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

• The TV turns off suddenly.

• Check the power control settings. The power supply may be interrupted.

• Check if the Sleep Timer / Timer Power Off feature is activated in the Timers settings.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Licenses

Supported licenses may differ by model. For more information about licenses, visit www.lg.com

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

For DTS patents, see http://patents.dts.com Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol together are registered trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.

Key CODES

• This feature is not available for all models.

Code (Hexe)| Function| Note| Code (Hexe)| Function| Note
---|---|---|---|---|---
00| CH/\PAGE| R/C Button| C0|  (Green)| R/C Button
01| CHVPAGE| R/C Button| C1|  (Red)| R/C Button
02| VOL+| R/C Button| C2|  (Yellow)| R/C Button
03| VOL-| R/C Button| C3|  (Blue)| R/C Button
06| >| R/C Button| 8E| | R/C Button
07| <| R/C Button| 8F| | R/C Button
08|  (Power)| R/C Button| B0| | R/C Button
09| | R/C Button| B1| | R/C Button
10 – 19| Number Key 0 – 9| R/C Button| BA| | R/C Button
28|  (Back)| R/C Button| AA| INFO | R/C Button
39| CCCHAR/NUM| R/C Button| AB| GUIDE| R/C Button
40| (Back)| R/C Button| 7C| SMART| R/C Button
41| V| R/C Button| 7E| | R/C Button
43| MENU SETTINGS| R/C Button| DC| | R/C Button
44| OK ENTER *| R/C Button| 60| PIP/| R/C Button
0B| INPUT **| R/C Button| 61| PIP INPUT/| R/C Button
0C| PORTAL| R/C Button| 71| PIP CH+/| R/C Button
0E| TIMER| R/C Button| 72| PIP CH-/| R/C Button
1A| FLASHBK| R/C Button| 63| SWAP/| R/C Button
4C| | R/C Button| 91| VD/*| R/C Button
5B| EXIT| R/C Button| | |

EXTERNAL CONTROL DEVICE SETUP

• Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
  Note: The type of control port on the TV can be different between model series.

• Please be advised that not all models support this type of connectivity.

• Cable is not provided.

USB to Serial converter with USB Cable
USB Type

• LGTV supports PL2303 chip-based (Vendor ID: 0x0557, Product ID: 0x2008) USB to serial converter which is not made nor provided by LG.
• It can be purchased from computer stores that carry accessories for IT support professionals.

RS-232C with RS-232C Cable

DE9 (D-Sub 9 pin) Type

• You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female type) to RS-232C cable required for the connection between the PC and the TV, which is specified in the manual.
• The connection interface may differ from your TV.
  

Set ID

For Set ID number, see “Real Data Mapping”.

1. Press MENU SETTINGS to access the main menus.
2. Press the Navigation buttons to scroll to OPTION and press OK.
3. Press the Navigation buttons to scroll to SET ID and press OK.
4. Scroll left or right to select a set ID number and select CLOSE. The adjustment range is 1-99.
5. When you are finished, press EXIT.

Customer Computer

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable)

3-Wire Configurations (Not standard)

Communication Parameters

Baud rate: 9600 bps (UART)
Data length: 8 bits
Parity: None

Stop bit: 1 bit
Communication code: ASCII code
Use a crossed (reverse) cable.

Command reference list

(Depending upon model)

| COMMAND1| COMMAND2| DATA

(Hexadecimal)

| | COMMAND1| COMMAND2| DATA

(Hexadecimal)

---|---|---|---|---|---|---|---
01. Power*| k| a| 00 to 01| 11. OSD Select| k| l| 00 to 01
02. Aspect Ratio| k| c| (page 22)| 12. Remote Control Lock Mode| k| m| 00 to 01
03. Screen Mute| k| d| (page 22)| 13. Balance| k| t| 00 to 64
04. Volume Mute| k| e| 00 to 01| 14. Color (Color) Temperature| x| u| 00 to 64
05. Volume Control| k| f| 00 to 64| 15. Equalizer| j| v| (page 24)
06. Contrast| k| g| 00 to 64| 16. Key| m| c| Key Codes
07. Brightness| k| h| 00 to 64| 17. Control Backlight, Control Panel Light| m| g| 00 to 64
08. Color/ Color| k| i| 00 to 64| 18. Input select (Main)| x| b| (page 24)
09. Tint| k| j| 00 to 64| 19. 3D (Only 3D models)| x| t| (page 24)
10. Sharpness| k| k| 00 to 32| 20. Extended 3D (Only 3D models)| x| v| (page 25)

Note: During playing or recording media, all commands except Power (ka) and Key (mc) are not executed
and treated as NG. With RS-232C cable, TV can communicate “ka command” in power-on or power-off
status. But with USB-to-Serial converter cable, the command works only if TV is on.

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1]: First command to control the TV. (j, k, m or x)
[Command 2]: Second command to control the TV.
[Set ID]: You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is
1 to 99. If [Set ID] value is selected to ‘00’, every connected set can be controlled.

• [Set ID] is indicated as decimal (1 to 99) on menu and as Hexadecimal (0x00 to 0x63) on transmission/
  receiving protocol.
  [DATA] : To transmit command data (hexadecimal). Transmit ‘FF’ data to read status of command.
  [Cr] : Carriage Return – ASCII code ‘0x0D’
  [ ] : Space – ASCII code ‘0x20’

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

Command2][ ][Set ID][ ][NG][Data][x]

The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors.

Data 00: Illegal Code

Real data mapping (Hexadecimal: Decimal)

• When you enter the [data] in hexadecimal, refer to following conversion table.
• Channel Tune (ma) Command uses two-byte hexadecimal value([data]) to select channel number.

• Commands may work differently depending upon model and signal.
  01. Power (Command: k a)

1. Power (Command: k a)

   • To control Power On or Off of the set. Transmission
     [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off
     Power On
     Ack
     [al[ ][Set I DJ[ ][OK/NG][Data][x]

   • To Show TV is Power On or *Off Transmission
     [k][a][ ][Set ID][ ][FF][Cr] Ack
     [al[ ][Set I DH ][OK][Data][x]

   • Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function.

2. Aspect Ratio (Command: k c)
   (Main Picture Size)

   • To adjust the screen format. (Main picture format) You can also adjust the screen format using the Aspect Ratio in the PICTURE menu.
     Transmission
     [k][c][ ][Set ID][ ][Data][Cr] Data 01: Normal screen (4:3)
     (Just Scan Off )
     02: Wide screen (16:9)
     (Just Scan Off )
     09: Just Scan
     06: Original (Just
     Scan off )
     Ack
     [cl[ ][Set ID][ l[OK/NG][Data][x]

   • Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.

3. Screen Mute (Command: k d)

   • To select screen mute on/off. Transmission
     [k][d][ ][Set ID][ ][Data][Cr] Data 00: Screen mute off (Picture on)
     Video mute off
     01: Screen mute on (Picture off )
     10: Video mute on
     Ack
     [d][ ][Set ID][ ][OK/NG][Data][x]

   • In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.

4. Volume Mute (Command: k e)

   • To control volume mute on/off.
     You can also adjust mute using the MUTE button on remote control.
     Transmission
     [k][e][ ][Set ID][ ][Data][Cr] Data 00: Volume mute on (Volume off)
     01: Volume mute off (Volume on)
     Ack
     [el[ ][Set ID][ ][OK/NG][Data][x]

5. Volume Control (Command: k f)

   • To adjust volume.
     You can also adjust volume with the volume buttons on remote control.
     Transmission
     [k][f][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 64
     Ack
     [fl[ ][Set I DJ[ l[OK/NG][Data][x]

6. Contrast (Command: k g)

   • To adjust screen contrast.
     You can also adjust contrast in the PICTURE menu.
     Transmission
     [k][g][ ][Set I DJ[ ][Data][Cr] Data Min: 00 to Max: 64
     Ack
     [g][ ][Set ID][ l[OK/NG][Data][x]

7. Brightness (Command: k h)

   • To adjust screen brightness.
     You can also adjust brightness in the PICTURE menu.
     Transmission
     [k][h][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 64
     Ack
     [h][ ][Set ID][ ][OK/NG][Data][x]

8. Color/Colour (Command: k i)

   • To adjust the screen Color(Colour).
     You can also adjust colour in the PICTURE menu. Transmission
     [k][i][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 64
     Ack
     [i][ ][Set I DH ][OK/NG][Data][x]

9. Tint (Command: k j)

   • To adjust the screen tint.
     You can also adjust tint in the PICTURE menu. Transmission
     [k][j][ ][Set ID][ ][Data][Cr] Data Red: 00 to Green: 64
     Ack
     [j][ ][Set I DJ[ ][OK/NG][Data][x]

10. Sharpness (Command: k k)

    • To adjust the screen sharpness.
      You can also adjust sharpness in the PICTURE menu.
      Transmission
      [k][k][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 32
      Ack
      [kl[ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command:

    • To select OSD (On Screen Display) on/off when controlling remotely.
      Transmission
      [k][I][ ][Set ID][ ][Data][Cr] Data 00: OSD off 01: OSD on
      Ack
      [I][ ][Set I DH ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m)

    • To lock the front panel controls on the monitor and remote control.
      Transmission
      [k][m][ ][Set ID][ ][Data][Cr] Data 00: Lock off 01: Lock on
      Ack
      [ml[ ][Set I DJ[ l[OK/NG][Data][x]

    • If you are not using the remote control, use this mode. When main power is off & on (plug-off and plug-in, after 20 – 30 seconds), external control lock is released.

    • In the standby mode (DC off by off timer or ‘ka’, ‘mc’ command), and if key lock is on, TV will not turn on by power on key of IR & Local Key.

13. Balance (Command: k t)

    • To adjust balance.
      You can also adjust balance in the AUDIO menu.
      Transmission
      [k][t][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 64
      Ack
      [t][ ][Set I DH ][OK/NG][Data][x]

14. Color(Colour) Temperature (Command: x u)

    • To adjust colour temperature. You can also adjust Color(Colour) Temperature in the PICTURE menu.
      Transmission
      [x][u][ ][Set ID][ ][Data][Cr] Data Min: 00 to Max: 64
      Ack
      [u][ ][Set ID][ l[OK/NG][Data][x]

15. Equalizer (Command: j v)

    • Adjust EQ of the set.
      Transmission
      [j][v][ ][Set ID][ ][Data][Cr] 7| 6| 5| Frequency| 4| 3| 2| 1| 0| Step
      ---|---|---|---|---|---|---|---|---|---
      0| 0| 0| 1st Band| 0| 0| 0| 0| 0| 0(decimal)
      0| 0| 1| 2nd Band| 0| 0| 0| 0| 1| 1(decimal)
      0| 1| 0| 3rd Band| …| …| …| …| …| …
      0| 1| 1| 4th Band| 1| 0| 0| 1| 1| 19(decimal)
      1| 0| 0| 5th Band| 1| 0| 1| 0| 0| 20(decimal)

Acknowledgement
[v][ ][Set ID][ l[OK/NG][Data][x]

16. Key (Command: m c)

    • To send IR remote key code.
      Transmission
      [m][c][ ][Set ID][ ][Data][Cr] Data Key code – page 17.
      Ack
      [cl[ ][Set ID][ ][OK/NG][Data][x]

17. Control Backlight, Control Panel Light (Command: m g)

    • For LCD TV / LED TV
    • To control the backlight.
      Transmission
      [m][g][ ][Set I DJ[ ][Data][Cr] Data Min: 00 to Max: 64
      Ack
      [g][ ][Set ID][ ][OK/NG][Data][x]

18. Input select (Command: x b) (Main Picture Input)

    • To select input source for main picture.
      Transmission
      [x][b][ ][Set ID][ ][Data][Cr] Data00: DTV| 01: CADTV
      ---|---
      11: CATV| 10: ATV
      20: AV or AV1| 21: AV2
      40: Component1
      60: RGB| 41: Component2
      90: HDMI1| 91: HDMI2
      92: HDMI3| 93: HDMI4
      [bl[ ][Set ID][ ][OK/NG][Data][x]

    • This function depends on model and signal.

19. 3D(Command: x t) (only 3D models) (Depending upon model)

    • To change 3D mode for TV.
      Transmission
      [x][t][ ][Set I DJ[ ][Data 00][ ] [Data 01] [ ][Data 02][ ][Data 03][Cr] (Depending upon model)
      Data Structure

    • [Data 00]| 00: 3D On

01: 3D Off

02: 3D to 2D

03: 2D to 3D

---|---
[Data 01]| 00: Top and Bottom

01: Side by Side

02: Check Board

03: Frame Sequential

04: Column interleaving

05: Row interleaving

[Data 02]| 00: Right to Left

01: Left to Right

[Data 03]| 3D Effect(3D Depth): Min: 00 – Max: 14

(*transmit by Hexadecimal code)

  * If [Data 00] is 00 (3D On), [Data 03] has no meaning.
  * If [Data 00] is 01 (3D off ) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning.
  * If [Data 00] is 03 (2D to 3D), [Data 01] and [Data 02] have no meaning.
  * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
  * All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal.  

X: don’t care
Ack
[t][ ][Set ID][ ][OK][Data00][Data01 ][Data02] [Data03][x] [t][ ][Set I DJ[ ][NG][Data00][x]

20. Extended 3D(Command: x v) (only 3D models) (Depending upon model)
    • To change 3D option for TV.
      Transmission
      [x][v][ ][Set ID][ ][Data 00][] [Data 01][Cr][Data 00]| 3D option

00: 3D Picture Correction

01: 3D Depth (3D Mode is Manual Only)

02: 3D Viewpoint

06: 3D Color Correction

07: 3D Sound Zooming

08: Normal Image View

09: 3D Mode (Genre)

---|---
[Data 01]| It has own range for each 3D option

determined by [Data 00].

1. When| [Data 00] is 00

00: Right to Left

01: Left to Right

2. When| [Data 00] is 01, 02
   Data| Min: 0 – Max: 14 (*transmit by

Hexadecimal code)

Data value range(0 – 20) converts Viewpoint range (-10 – +10) automatically (Depending upon model)
This option works when 3D Mode (Genre) is manual only.
3) When| [Data 00] is 06, 07

00: Off

01: On

4. When| Data 00] is 08

00: Revert to 3D video from 3D-to-2D

converted 2D video

| 01: Change 3D video to 2D video,

except 2D-to-3D video

If conversion condition doesn’t meet, command

is treated as NG.

5. When [Data 00] is 09
   00: Standard| 01: Sport
   02: Cinema| 03: Extreme
   04: Manual| 05: Auto

Ack
[v][ ][Set ID][ ][OK][Data00][Data01][x] [ v ][ ][Set I DH ][NG][Data00][x]

Regulatory

FCC NOTICE

(For USA)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radio Frequency Interference Requirements (for UNII devices)

High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
These radar stations can cause interference with and/or damage this device. This device cannot be co-located with any other transmitter.

FCC RF Radiation Exposure Statement

For having wireless function (WLAN, Bluetooth,…)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the radiator and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.

Industry Canada Statement

(For Canada)
[For having wireless function (WLAN, Bluetooth,…)] This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement

(For Canada)
[For having wireless function (WLAN, Bluetooth,…)] This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna & your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULDVOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

WARNING

For Canada)
[For product having the wireless function using 5 GHz frequency bands]

• The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
• For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the Earp. limit;
• For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the Earp. limits specified for point-to-point and non-point-to point operation as appropriate; and
• The worst-case tilt angle(s) necessary to remain compliant with the Earp. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.(devices operating in the band 5250-5350 MHz with a maximum Earp. greater than 200 maw)
• High-power radars are allocated as primary users (i.e. priority users) of the bands 5250–5350 MHz and 5650–5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

NOTE TO CABLE/TV INSTALLER

(For USA and Canada)
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

LG Recycling Policy

(For USA)
LG Electronics offers a customized e-waste takeback and recycling service that meets local needs and requirements in the countries where e-waste regulations are in place, and also provides product and packaging take-back and recycling service voluntarily in some countries. LG Electronics evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the goal of improving recyclability where practicable. Through these activities, LG seeks to contribute to conserving natural resources and protecting the environment.
For more information about the LG Recycling Policy, please visit our global site at http://www. lg.com/global/sustainability/environment/takeback- recycling

WARNING!

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• Using cabinets or stands recommended by the manufacturer of the television set.
• Only using furniture that can safely support the television set
• Ensuring the television set is not overhanging the edge of the supporting furniture.
• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.
• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.

Symbols

| Refers to alternating current(AC)
---|---
| Refers to direct current(DC).
| Refers to class II equipment.
| Refers to stand-by
| Refers to “ON” (power).
| Refers to dangerous voltage.

CHILD SAFETY

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

• Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on which the television is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.
  

WALL OR CEILING MOUNT YOUR TELEVISION

• ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.
  

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

• Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.
• NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

Customer Support

www.lg.com

P/NO : MFL69412017 (1607-REV00)
www.lg.com

Declaration of Conformity
Trade Name: LG
Model: 43UW660H-UD, 49UW660H-UD,
55UW660H-UD, 49UW970H-UA,
55UW970H-UA, 65UW970H-UA
Responsible Party: LG Electronics Inc.
Address: 1000 Sylvan Ave. Englewood Cliffs NJ
07632 U.S.A
TEL: 201-266-2534

The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service.

LG Customer Information Center

For inquires or comments, visit www.lg.com or call;

1-888-865-3026 USA, Commercial User
1-855-286-2456 CANADA

References

• Homepage | ENERGY STAR
• Manual-Hub.com - Free PDF manuals!
• LG Open Source
• Patents - DTS
• Computer Products & Accessories: Locks & Docks | Kensington
• LG Electronics & Home Appliances | Shop Now | LG USA
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>