W1942SM Computer Monitor

Product Information

Specifications

• Models: W1942SM, W2042SM, W2242SM

• Power Cord: Supplied with the unit

• Power Supply: Refer to the specifications in the manual or
  consult with your dealer

• Ventilation: Display has ventilation openings for heat
  release

• Display Type: Active Matrix LCD

Important Precautions

On Safety

Use only the power cord supplied with the unit. If a different
power cord is used, ensure it is certified by applicable national
standards or provided by the supplier. Faulty power cords should be
replaced by contacting the manufacturer or an authorized repair
service provider.

The power supply cord serves as the main disconnection device,
so ensure the socket-outlet remains easily accessible after
installation. Operate the display only from a power source
specified in the manual or listed on the display. If unsure about
the power supply in your home, consult with your dealer.

Avoid overloaded AC outlets, extension cords, frayed power
cords, and broken plugs as they can lead to electrical shock or
fire hazards. Contact a service technician for replacement.

Do not open the display as there are no user-serviceable
components inside. There are dangerous high voltages even when the
power is off. Contact your dealer if the display is not operating
properly.

To avoid personal injury, do not place the display on a sloping
shelf unless properly secured. Use only a stand recommended by the
manufacturer. Avoid dropping objects on or applying impact to the
product. Do not throw toys or objects at the product screen to
prevent injury, product damage, and display damage.

On Installation

Avoid placing anything on or rolling over the power cord to
prevent damage. Do not position the display near water, such as
bathtubs, washbowls, kitchen sinks, laundry tubs, wet basements, or
swimming pools. The display has ventilation openings to release
heat generated during operation. Blocking these openings can cause
heat buildup, leading to failures and fire hazards. Therefore,
NEVER:

• Block the bottom ventilation slots by placing the display on a
  bed, sofa, rug, etc.

• Place the display in a built-in enclosure without proper
  ventilation.

• Cover the openings with cloth or other materials.

• Place the display near or over a radiator or heat source.

The main power breaker is the power cord, and it should be
easily operable at a convenient location.

Avoid rubbing or striking the Active Matrix LCD with hard
objects as this may scratch, mar, or permanently damage it.

Product Usage Instructions

1. Power Connection

Ensure that you use the supplied power cord to connect the
display to a power source. If a different power cord is used, make
sure it meets applicable national standards or is provided by the
supplier.

2. Display Placement

Choose a stable and secure location to place the display. Avoid
sloping shelves unless properly secured. Use a stand recommended by
the manufacturer for optimal stability.

3. Avoiding Impact and Damage

Do not drop objects on the display or apply excessive force.
This can cause injury to humans, damage to the product, and
permanent display damage.

4. Cleaning and Maintenance

Regularly clean the display using a soft, lint-free cloth. Do
not use harsh chemicals or abrasive materials that may scratch or
damage the Active Matrix LCD. Ensure the display is turned off and
unplugged before cleaning.

FAQ

Q: Can I use a different power cord with the display?

A: It is recommended to use only the power cord supplied with
the unit. If you need a replacement or must use a different power
cord, make sure it is certified by applicable national standards or
provided by the supplier.

Q: Can I open the display to perform repairs?

A: No, there are no user-serviceable components inside. Opening
the display can be dangerous due to high voltages. Contact your
dealer if the display is not operating properly.

Q: How should I clean the display?

A: Use a soft, lint-free cloth to clean the display. Do not use
harsh chemicals or abrasive materials that may scratch or damage
the Active Matrix LCD. Ensure the display is turned off and
unplugged before cleaning.

User’s Guide
W1942SM W2042SM W2242SM
Make sure to read the Important Precautions before using the product.
Keep the User’s Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.

Search

Important Precautions
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement.
Do not Open the Display. There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly.
To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display’s cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous. It can cause electric shock.
A1

Search

Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Main power breaker is the power cord and this breaking device must be located at a location where it is easy to operate.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.
On Cleaning
Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.
On Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
A2

Search

Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.
Connecting the stand 1. Place the monitor with its front facing downward on a soft cloth. 2. Assemble the Stand Body into the product in the correct direction as shown in the picture.
Make sure you push it until you hear it “click”. Hinge Body
Stand Body
3. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
Stand Base
Stand Body
4. Tie down the base lock to perpendicularity direction. 5. Once assembled take the monitor up carefully and face
the front side
Important This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. A3

Search

Connecting the Display
Disassembling the stand 1. Put a cushion or soft cloth on aflat
surface.

2. Place the monitor face Down on
the cushion or soft cloth.

3. Change your lock on the product as it follows and turn it in the arrow direction.

If you can’t release the stand base even the locking knob is at a release position, Please push the indicated knob down and retry it.

4. Pull out the Stand to remove.
A4

Search

Connecting the Display 5. Pushing the PUSH button, Take the stand base from stand body.

Warning: You can hurt your finger.

Good Position

Bad Position

Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.
Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5°~20°
20

Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees.
A5

Search

Connecting the Display
Using the Computer 1. Make sure to turn off the computer and product. Connect the cable as below sketch map
form 1 to 2 . A Connect Audio Cable B Connect Dsub Cable (PC) C Connect Dsub Cable (Mac)
Power Cord Analog signal Audio signal

Wall-outlet type PC-outlet type

Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in.

Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) Dsub VGA connector on the supplied cable to a 15 pin 2 row connector.
2. Press button on the front switch panel to turn the
power on. When monitor power is turned on, the ‘Self Image Setting Function’ is executed automatically.
NOTE
Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution.
A6

Search

Control Panel Functions Front Panel Controls

Control

Function

MUTE Button

Use this button to mute the speaker volume. Use this button to save the adjusted speaker volume.

MENU Button

Use this button to enter or exit the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message “OSD LOCKED” should appear.
You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message “OSD UNLOCKED” should appear.

A7

Search

Control Panel Functions

Control

Function
Use these buttons to select or adjust functions in the On Screen Display.
For more information, refer to page A15.

VOLUME

Use these buttons to select or adjust functions in the On Screen Display.

Use

buttons to decrease or increase the speaker

volume.

AUTO/SET Button

Use this button to enter a selection in the On Screen Display.
AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is – 19 inch monitor : 1440 x 900 – 20.1/22 inch monitor : 1680 x 1050

Power Button Power Indicator

Use this button to turn the display on or off.
This Indicator lights up blue when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber.

A8

Search

On Screen Display (OSD) Control Adjustment

Screen Adjustment
Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments.

To make adjustments in the On Screen Display, follow these steps:

MENU

AUTO/SET

MENU

Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the or Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button.
Use the / Buttons to adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items.
Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD.

A9

Search

On Screen Display(OSD) Selection and Adjustment

The following table indicates all the On Screen Display control, adjustment, and setting menus.

Main menu Sub-menu

PICTURE

BRIGHTNESS CONTRAST

COLOR

GAMMA PRESET RED

sRGB 6500K 9300K

GREEN

BLUE HORIZONTAL

VERTICAL TRACKING CLOCK
PHASE

SHARPNESS

SETUP

LANGUAGE

OSD HORIZONTAL

POSITION VERTICAL

WHITE BALANCE

POWER INDICATOR

4:3 IN WIDE

FLATRON F-ENGINE

FACTORY RESET MOVIE INTERNET

USER

NORMAL

DEMO

A

Reference

To adjust the brightness, contrast and gamma of the screen

To customize the color of the screen

To adjust the position of the screen
To improve the clarity and stability of the screen
To customize the screen status for a user’s operating environment

To select or customize desired image settings
: Adjustable A : Analog Input

NOTE The order of icons may differ depending on the model (A10~A15).

A10

Search

On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears.
Main Menu

MENU : Exit – + : Adjust (Decrease/Increase) SET : Enter
: Select another sub-menu
Menu Name

Button Tip

Icons

Sub-menus

NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual.

A11

Search

On Screen Display(OSD) Selection and Adjustment

Main menu
PICTURE
PICTURE

Sub menu

Description

BRIGHTNESS To adjust the brightness of the screen.

CONTRAST To adjust the contrast of the screen.

GAMMA

MENU : Exit

+-

: Decrease : Increase

SET : Select another sub-menu

Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images.

COLOR
COLOR

PRESET

RED

GREEN

ME+-NU

: : :

Exit Decrease Increase

BLUE

SET : Select another sub-menu

Select the screen color. · sRGB: Set the screen color to fit the
SRGB standard color specification. · 6500K: Slightly reddish white. · 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.

A12

Search

On Screen Display(OSD) Selection and Adjustment

Main menu

Sub menu

Description

TRACKING

TRACKING

HORIZONTAL To move image left and right. VERTICAL To move image up and down.

ME+-NU

: : :

Exit Decrease Increase

SET : Select another

sub-menu

CLOCK

To minimize any vertical bars or stripes visible on the screen background. The horizontal screen size will also change.

PHASE

To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

SHARPNESS To adjust the clearness of the screen.

A13

Search

On Screen Display(OSD) Selection and Adjustment

Main menu

SETUP

SETUP

Sub menu

Description

LANGUAGE OSD POSITION WHITE BALANCE
4:3 IN WIDE

To choose the language in which the control names are displayed.
To adjust position of the OSD window on the screen.
If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen.
To select the image size of the screen.

WIDE

4:3

ME+-NU

: : :

Exit Adjust Adjust

SET : Select another

sub-menu

• 4:3 : Depending on the input video signal ratio, it is automatically changed to an optimized screen ratio. (The 1280X1024 input signal is changed to 5:4 ratio and 1024X768 to 4:3.)

Resolution Screen ratio

1280×1024

5 : 4

1152×864

4 : 3

1024×768

4 : 3

800×600

4 : 3

640×480

4 : 3

720×480

3 : 2

The input signal which the 4:3 IN WIDE does not support ‘4:3’ is the following.
– The 19 inch monitor is 720×400,1280×768,1360×768, 1440×900 – The 20.1 inch monitor is 720×400,1280×768,1360×768,1680×1050 – The 22 inch monitor is 720×400,1280×768,1360×768,1680×1050

POWER INDICATOR

Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on.

FACTORY RESET

Restore all factory default settings except
– “LANGUAGE.”
Press the button to reset immediately.

If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal.

A14

Search

On Screen Display(OSD) Selection and Adjustment

The OSD screen will appear when you touch the of the monitor.
Menu Name Icons
Sub-menu Name

button on the left side

Main menu

Sub menu

Description

MOVIE This feature lets you easily select the best desired INTERNET image condition optimized to the environment
(ambient illumination, image types etc). MOVIE: For animation images in videos or movies INTERNET: For text images (Word processing etc.)

USER

User You can manually adjust brightness, ACE or RCM. You can save or restore the adjusted value even when using a different environment.

… (Brightness): Adjusts screen brightness. …ACE(Adaptive Clarity Enhancer): Selects the clarity mode. …RCM(Real Color Management): Selects the color mode.

0 Not applied 1 Green enhance 2 Flesh tone 3 Color Enhance

Select the

sub-menu using the AUTO/SET

button and save the YES value using the ,

buttons.

NORMAL This is under normal operating conditions.

DEMO

This is just for advertising to customer in the shops. It’s setting is same with Movie mode and screen is divided by half.

A15

Search

Troubleshooting

Check the following before calling for service.

No image appears

Is the power cord of the · Check and see if the power cord is connected

display connected?

properly to the power outlet.

Is the power on and the · Adjust the brightness and the contrast. power indicator blue or green?

Is the power indicator amber?

· If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.
· Try to turn on the PC.

Do you see an “OUT OF · This message appears when the signal from the

RANGE” message on PC (video card) is out of horizontal or vertical

the screen?

frequency range of the display. See the

‘Specifications’ section of this manual and

configure your display again.

Do you see a “CHECK SIGNAL CABLE” message on the screen?

· This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see a “OSD LOCKED” message on the screen?

Do you see “OSD LOCKED” when you push MENU button?

· You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.

A16

Search

Troubleshooting

Display image is incorrect

Display Position is incorrect.

· Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display.

On the screen background, vertical bars or stripes are visible.

· Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display.

Any horizontal noise appearing in any image or characters are not clearly portrayed.

· Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display.
· Check Control Panel –> Display –> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color).

Important
Check Control Panel –> Display –> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution.
Reasons for Recommending Optimal Resolution : The aspect ratio is 16:10. If the input resolution is not 16:10 (for instance, 16:9, 5:4, 4:3), you might encounter problems such as blurred letters, blurry screen, cut-off screen display or tilted screen.
The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer.

A17

Search

Troubleshooting

Display image is incorrect

The screen color is mono or abnormal.

· Check if the signal cable is properly connected and use a screwdriver to fasten if necessary.
· Make sure the video card is properly inserted in the slot.
· Set the color setting higher than 24 bits (true color) at Control Panel – Settings.

The screen blinks.

· Check if the screen is set to interlace mode and if yes, change it to the recommend resolution.

Have you installed the display driver?

Have you installed the display driver?

· Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com.

Do you see an “Unrecognized monitor, Plug&Play (VESA DDC) monitor found” message?

· Make sure to check if the video card supports Plug&Play function.

A18

Search

Specifications

W1942SM

Display
Sync Input
Video Input Resolution Plug&Play Power Consumption Dimensions & Weight
Tilt Range Power Input Environmental Conditions
Stand Base Power cord

19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.285*0.285 mm pixel pitch

Horizontal Freq. Vertical Freq. Input Form
Signal Input

28 – 83 kHz (Automatic) 56 – 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green)
15 pin D-Sub Connector

Input Form

RGB Analog (0.7 Vp-p/ 75 ohm)

Max Recommend

VESA 1440 x 900 @ 75 Hz VESA 1440 x 900 @60 Hz

DDC 2AB

On Mode Sleep Mode
Off Mode

: 38W(Typ.) 1W 1W

With Stand

Without Stand

Width 44.84 cm / 17.65 inches 44.84 cm / 17.65 inches

Height 38.33 cm / 15.09 inches 30.07 cm / 11.84 inches Depth 19.84 cm / 7.81 inches 6.32 cm / 2.49 inches

Net

4.1 kg (9.11 lbs)

Tilt

-5°~ 20°

AC 100-240V~ 50/60Hz 0.8A

Operating Conditions

Temperature 10°C to 35 °C

Humidity

10 % to 80 % non-Condensing

Storage Conditions

Temperature -20°C to 60 °C

Humidity

5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type or PC-outlet type

NOTE Information in this document is subject to change without notice.

A19

Search

Specifications

W2042SM

Display
Sync Input
Video Input Resolution Plug&Play Power Consumption Dimensions & Weight
Tilt Range Power Input Environmental Conditions
Stand Base Power cord

20.1 inches (51.11 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 20.1 inches viewable 0.258*0.258 mm pixel pitch

Horizontal Freq. Vertical Freq. Input Form

28 – 83 kHz (Automatic) 56 – 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green)

Signal Input Input Form

15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm)

Max Recommend

VESA 1680 x 1050 @60 Hz VESA 1680 x 1050 @60 Hz

DDC 2AB

On Mode Sleep Mode
Off Mode

: 42W(Typ.) 1W 1W

Width Height Depth Net

With Stand

Without Stand

47.39 cm / 18.66 inches 47.39 cm / 18.66 inches

39.04 cm / 15.37 inches 31.89 cm / 12.56 inches 19.84 cm / 7.81 inches 6.29 cm / 2.48 inches

4.5 kg (10 lbs)

Tilt

-5°~ 20°

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10°C to 35 °C

Humidity

10 % to 80 % non-Condensing

Storage Conditions

Temperature -20°C to 60 °C

Humidity

5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type or PC-outlet type

NOTE Information in this document is subject to change without notice.

A20

Search

Specifications

W2242SM

Display
Sync Input
Video Input Resolution Plug&Play Power Consumption Dimensions & Weight
Tilt Range Power Input Environmental Conditions
Stand Base Power cord

22 inches (55.868 cm) Flat Panel Active matrix-TFT LCD, Anti-Glare coating 22 inches viewable 0.282*0.282 mm pixel pitch

Horizontal Freq. Vertical Freq. Input Form

28 – 83 kHz (Automatic) 56 – 75 Hz (Automatic) Separate TTL, Positive/Negative SOG (Sync On Green)

Signal Input Input Form

15 pin D-Sub Connector RGB Analog (0.7 Vp-p/ 75 ohm)

Max Recommend

VESA 1680 x 1050 @60 Hz VESA 1680 x 1050 @60 Hz

DDC 2AB

On Mode Sleep Mode
Off Mode

: 42W(Typ.) 1W 1W

Width Height Depth Net

With Stand

Without Stand

51.57 cm / 20.30 inches 51.57 cm / 20.30 inches

41.80 cm / 16.46 inches 34.46 cm / 13.57 inches 20.94 cm / 8.24 inches 6.31 cm / 2.48 inches

4.65 kg (10.33 lbs)

Tilt

-5°~ 20°

AC 100-240V~ 50/60Hz 1.0A

Operating Conditions

Temperature 10°C to 35 °C

Humidity

10 % to 80 % non-Condensing

Storage Conditions

Temperature -20°C to 60 °C

Humidity

5 % to 90 % non-Condensing

Attached ( ), Detached ( O )

Wall-outlet type or PC-outlet type

NOTE Information in this document is subject to change without notice.

A21

Search

Specifications

Preset Modes (Resolution)
19 inch monitor

Display Modes (Resolution)

1

640 x 350

2

720 x 400

3

640 x 480

4

640 x 480

5

800 x 600

6

800 x 600

7

832 x 624

8

1024 x 768

9

1024 x 768

10

1152 x 870

11

1152 x 900

12

1280 x 1024

13

1280 x 1024

14

1440 x 900

*15

1440 x 900

16

1440 x 900

Horizontal Freq. (kHz) 31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.123 68.681 61.805 63.981 79.976 55.500 55.935 70.635

Vertical Freq. (Hz) 70 70 60 75 60 75 75 60 75 75 65 60 75 60 60 75

*Recommend Mode

20.1/22 inch monitor

Display Modes (Resolution)

1

720 x 400

2

640 x 480

3

640 x 480

4

800 x 600

5

800 x 600

6

1024 x 768

7

1024 x 768

8

1152 x 864

9 1280 x 1024

10 1280 x 1024

11 1680 x 1050

*12 1680 x 1050

Horizontal Freq. (kHz) 31.468 31.469 37.500 37.879 46.875 48.363 60.123 67.500 63.981 79.976 64.674 65.290

Vertical Freq. (Hz) 70 60 75 60 75 60 75 75 60 75 60 60

*Recommend Mode

Indicator
MODE
On Mode Sleep Mode Off Mode

LED Color blue
amber Off
A22

Search

Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or the interchange device.
1. Place the monitor with its front facing downward on a soft cloth.

2. Separate the stand by pushing the PUSH button.

.3 Install the Wall mount plate.
Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased.

Good Position

Bad Position

Warning: You can hurt your finger.

Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores.
A23

Search

Digitally yours

Search

References

• Consumer & Home Electronics from LG | LG UK
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>