BELLEZE 014 HG 40750 Computer Desk with Hutch and File Cabinet User Manual

BELLEZE 014 HG 40750 Computer Desk with Hutch and File Cabinet

Overview

Assemble the furniture

• Assemble the furniture on an empty carton, carpet, or rug to prevent scratches or damage.
• For safety, please keep pets and children away from the assembly area.
• Ensure the product is fully assembled before use. If you are missing any hardware or products, do not use it until you have restored the missing parts.
• This furniture requires 2 people for assembly.
• Read this instruction manual before assembly to familiarize yourself with the various steps.
• Lay out all components and hardware separately on a flat surface and make sure that no parts are missing or damaged before assembly.
• Do not destroy or discard any packaging until you are certain that you have all the necessary parts for assembly.
• Hand-tight all hardware and be careful not to over-tighten to avoid damaging the product.

CAUTION

• There are small components used in the construction of this product.
• Loose items should be kept away from pets and children to avoid a choking hazard.
• Keep all plastic bags and packaging film away from pets and children to avoid suffocation.

PACKAGE CONTENTS

Required tools for Assembly

Required tools for assembly (Not included)

INSTALLATION INSTRUCTION

1. Attach corner connectors to the main desktop storage panel (16).

2. Assemble the main desktop storage panel (16) to the main desk left frame (18).

3. Assemble the main desk bottom storage panel (17) to the main desk left frame (18).

4. Assemble the main desk center frame (14) to the other side of the main desktop storage panel (16).

5. Secure the main desk center frame (14) to the main desk bottom storage panel (17).

6. Assemble the main desk horizontal panel (11) to the main desk back frame (10).

7. Assemble the main desk back panel (10) the main desk horizontal pane (11 )and the main desk long crossbar(12) to the main desk center frame(14)

8. Assemble the main desk’s short crossbar (15) between the main desk’s left and center frames.

9. Assemble the main desk’s right frame (13) to the main desk assembly.

10. Assemble corner connectors to the main desktop panel (9).

11. Assemble the main desktop panel (9) to the main desk frame assembly.

12. Secure the corner connectors from the main desktop panel to the back frame.

13. Place the main desk on its upright position and assemble the hutch frames (8) on top of the desk.

14. Assemble the hutch crossbars (7) between the hutch frames.

15. Attach cam bolts to the hutch top panel (1)

16. Assemble the hutch left, right and medial panels (3, 4, 5) to the underside of the hutch top panel (1 ).

17. Slide the hutch back panels (2) into the hutch assembly.

18. Assemble the hutch horizontal panel (6) to the assembly.

19. Assemble the hutch assembly onto the hutch frame.

20. Secure the hutch assembly to the frame.

21. Secure the hutch back panels in place.

22. Use the cable management clips to secure the LED light cable to the hutch frame.

23. Attach the power hub to the main desktop panel.

24. Attach the side storage pouch (19) to the side of the desk. Put the cardboard into the bottom of the side storage pouch, then stick the middle cloth board properly.

25. Attach cam bolts to the side shelf center panel (27).

26. Detach the slide runner from the slide mount.

27. Attach the slide mounts to the side shelf left and right panels (28, 29).

28. Assemble the side shelf left, right, and back panels (28, 29, 30) underneath the side shelf center panel (27).

29. Assemble the side shelf left frame (24) to the side shelf left panel (28).

30. Assemble the side shelf right frame (25) to the side shelf right panel (29).

31. Assemble the side shelf crossbars (30, 31) between the side shelf frame.

32. Secure the side shelf crossbar (31) to the side shelf back panel.

33. Attach corner connectors to the side shelf top panel (26).

34. Assembled the side shelf top panel (26) to the side shelf frame.

35. Attach the extension desk crossbar (22) and extension desk back panel (23) to the side shelf assembly.

36. Attach corner connectors to the underside of the extension desktop panel (21).

37. Attach corner connectors to the underside of the extension desktop panel (21).

38. Assemble the extension desk top panel (21) on top of the extension desk crossbar and the side shelf frame.

39. Secure the extension desk top panel to the extension desk back panel.

40. Attach slide runners to the drawer left and right panels (34, 35).

41. Attach cam bolts to the drawer front panel (33).

42. Assemble the drawer side panels (34, 35) to the drawer front panel (33).

43. Slide the drawer bottom panel (37) between the drawer side panels, and then assemble the drawer back panel (36) to the assembly.

44. Attach the drawer handle to the drawer front panel.
    OPTION 1 ASSEMBLY

45. Assemble the extension desk to the side of the main desk.

46. Slide the drawer into the side shelf.

47. Hang the drawer document rail across the top of the drawer.

48. Affix the office desk to a wall. Connect the power adapter to the LED lights trip cable, then plug the power adapter into a wall power outlet.

    • Furniture must be permanently fixed to the wall stud with an included anti-tipping device to prevent the furniture from tipping over.
    • Mark the drill position on the wall with a pencil.
    • Drill a small hole in the marked position.
    • Insert a wall anchor into the drilled hole.
    • Fixed the anti-tipping strap to the wall with provided screws. YOU’RE FINISHED!
    • OPTION 2 ASSEMBLY

49. Assemble the extension desk in front of the main desk.

50. Further, secure the extension desk in place.

51. Slide the drawer into the side shelf.

52. Hang the drawer document rail across the top of the drawer.

53. Affix the office desk to a wall. Connect the power adapter to the LED lights trip cable, then plug the power adapter into a wall power outlet.

    • Furniture must be permanently fixed to the wall stud with an included anti-tipping device to prevent the furniture from tipping over.
    • Mark the drill position on the wall with a pencil.
    • Drill a small hole in the marked position.
    • Fixed is an apprised die whal with provided screws. YOU’RE FINISHED!

Warning

• Only place items on top of the product if they meet the recommended size and weight limits.
• Climbing on, stepping on, or placing overweighted objects on the product may cause property damage and/or injuries.
• Items placed on this product must be resting on a support surface without hanging over the edges.
• Warning
• Serious or fatal crushing injuries may occur if the furniture tip-over.
• Furniture must be permanently affixed to the wall with an included anti-tipping device to prevent the furniture from tipping over.
• Different wall materials require different types of wall anchors or screws.
• Use a suitable wall anchors or screws for your specific wall to secure the stability and load-bearing capacity of the furniture.
• If you are uncertain about which type of device to use, please contact us or your local hardware store.

USER INSTRUCTION

USER INSTRUCTION (LED LIGHT REMOTE CONTROL)

MODE
Press the mode button to select the light effect.

• 3 colors flash
• 7 colors flash
• 3 colors spectrum cycling
• 7 colors spectrum cycling
• mixed colors cycling
• 7 colors strobe

COLOR CONTROL

• Press the color button to select 1 of the 16 static light color options.

BRIGHTNESS / SPEED

• Press the buttons to change the light brightness and effect speed.
• There are 10 levels of brightness and speed settings.
• The white light will flash when the setting is at minimum or maximum.
• NOTE: Speed control does not work when the light strip is showing static color.

AUTO

• Press the auto button to automatically cycle and loop all light effects.

REMOTE CONTROL LOCK

• Press the lock button to lock any remote control input.
• When the lock function is enabled, only the ON, OFF, and lock buttons will be functional.
• Press the lock button again to unlock the remote control.

OFF-TIMER

• Select between 1, 2, 3, or 4 hours off timer.
• The LED light will turn off after the set time when enabled.

RHYTHM 1

• Press the button to activate the slow light effect which syncs to surrounding music.

RHYTHM 2

• Press the button to activate the fast light effect which syncs to surrounding music.

FURNITURE CARE AND MAINTENANCE

Medium – Density Fiberboard

• Thank you for your purchase. We want your item to last as long as possible.
• To ensure the product gives you years of longevity, please follow the recommendations in this care and maintenance guide.

MAINTENANCE

• Tighten all bolts and screws again within the first 2 weeks of assembly.
• Check the tightness of all bolts every 2 months and tighten them if necessary.

CLEANING

• Clean the surface of the MDF (medium-density fiberboard) with a lightly dampened cloth.
• A small amount of mild soap can be used if necessary.
• Dry the surface immediately after cleaning.
• DO NOT use bleach or alcohol to clean the surface.
• DO NOT apply the wood treatment on parts made with MDF.
• MDF will swell and distort when exposed to water damage. Make sure to dry the furniture immediately after cleaning.

WARNING

• The manufacturer and seller are not responsible for any liability relating to personal injury, property damage, or losses, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.
• © All copyright of this document belongs to BELLEZE.
• This document may not be printed, translated, reproduced, or distributed in whole or in part without written permission from BELLEZE.

WARRANTY

• BELLEZE products come with a 1-year warranty from the date of delivery.
• Register your product on our website to enjoy our limited lifetime warranty!

AFTER-SALE SERVICE

• Encounter any difficulties or missing parts?
• Contact us at 1-800-682-6376 or email us at support@belleze.com.
• We will send you a replacement.
• Hassle-free!
• No need to worry about repackaging and sending your item back.
• We hope you enjoy your new BELLEZE furniture!
• Share your photos on Instagram and tag us: @bellezefurniture.
• FOLLOW US: @bellezefurniture
• CONTACT INFO:support@belleze.com. 1-800-682-6376
• www.belleze.com.
• Scan this QR Code to view our online tutorial.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>