Marshall Electronics VS-H60 Series Weather Proof Housing for IP Cameras User Manual

June 16, 2024
Marshall Electronics

Marshall-logo

Marshall Electronics VS-H60 Series Weather Proof Housing for IP Cameras

Product Information

The Marshall Electronics VS-H60 Series is a weatherproof housing designed for IP cameras. It provides protection and durability for outdoor camera installations.

Specifications

Marshall-Electronics-VS-H60-Series-Weather-Proof-Housing-for-IP-Cameras-
fig-1

  • Using Condition: Indoor / Outdoor
  • Input Power: AC24V
  • Power Consumption:
    • VS-H60-SHB: 24VAC, 22W
    • VS-H60-SHBD: 24VAC, 30W
    • VS-H60-SHBDW: 24VAC, 35W
  • Weather Resistant: Yes
  • Thermostat: Included
  • Dimension:
    • External Size (VS-H60): 173(W) x 116(H) x 428(D) mm
    • Internal Size (VS-H60): 132(W) x 78.4(H) x 383.8(D) mm
    • External Size (VS-H60-S): 184.6(W) x 127.3(H) x 460(D) mm
    • Internal Size (VS-H60-S): 132(W) x 78.4(H) x 383.8(D) mm
    • External Size (VS-H60-SHB): 184.6(W) x 127.3(H) x 460(D) mm
    • Internal Size (VS-H60-SHB): 132(W) x 78.4(H) x 294(D) mm
  • Weight:
    • VS-H60: 2.3kg
    • VS-H60-S: 3kg
    • VS-H60-SHB / VS-H60-SHBDW: 3.6kg
  • Material: Aluminum, Glass, Plastic
  • IP grade: IP66
  • Accessory: 1/4-20UNC Screws (3ea), Spring Washer (1ea), Flat Washer (1ea)

Marshall-Electronics-VS-H60-Series-Weather-Proof-Housing-for-IP-Cameras-
fig-2

Product Usage Instructions

Safety Instructions / Installation

Before using the VS-H60 Series, please read and follow these safety instructions:

  1. Safety check: Perform safety checks after service or repairs to ensure proper operating conditions.
  2. Installation: Install the housing according to the manufacturer’s instructions and applicable local codes.
  3. Attachments, changes, or modifications: Only use attachments and accessories specified by the manufacturer. Any unauthorized changes or modifications could void the warranty or authority to operate the equipment.

Camera Installation

To install the camera in the VS-H60 housing, follow these steps:

  1. Attach the supplied wall mount bracket to the desired location.
  2. Connect the camera to the housing using the appropriate cable fittings.
  3. Wire connection:
    • Connect the power input to the terminal block.
    • Connect the wiper control terminals 1 and 2 to the main power board.
    • Connect the camera power to the designated terminals.
    • Connect the wiper control and blower/defroster terminals as needed.

Marshall-Electronics-VS-H60-Series-Weather-Proof-Housing-for-IP-Cameras-
fig-4

Technical Drawings

Marshall-Electronics-VS-H60-Series-Weather-Proof-Housing-for-IP-Cameras-
fig-3

Installation

  • Wall Mount Bracket InstallationMarshall-Electronics-VS-H60-Series-Weather-Proof-Housing-for-IP-Cameras-fig-5
  • Supplied Bracketnics-VS-H60-Series-Weather-Proof-Housing-for-IP-Cameras-fig-6
  • Wire Connection Wire ConnectionMarshall-Electronics-VS-H60-Series-Weather-Proof-Housing-for-IP-Cameras-fig-7

Warranty

Marshall Electronics warranties to the first consumer that this VS-H60, weather-proof housing will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not apply to the product’s exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or construction void this warranty. No sales personnel of the seller or any other person is authorized to make any warranties other than those described above or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.

Due to constant efforts to improve products and product features, specifications may change without notice.

FAQ

Q: Is the camera included with the VS-H60 housing?

A: No, the camera is not included. The housing is designed to be compatible with various IP cameras.

Q: What are the configuration options for the VS-H60 Series?

A: The VS-H60 Series offers different configuration options with features such as a sunshield, heater, blower, defroster, wiper, and PoE+.

Q: What is the IP grade of the VS-H60 housing?

A: The housing has an IP66 rating, which means it is dust-tight and protected against powerful water jets.

Q: How much power does the housing consume?

A: The power consumption varies depending on the model. Please refer to the specifications section for detailed information.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals